1.Effect of surface finishing treatments on the color stability of CAD/CAM materials
Funda OZEN ; Nermin DEMIRKOL ; Ozge Parlar OZ
The Journal of Advanced Prosthodontics 2020;12(3):150-156
PURPOSE:
. The aim of this study was to evaluate the effect of different surface finishing processes on the color stabilities of lithium disilicate glass-ceramics, zirconia-reinforced lithium silicate ceramics, and resin nanoceramics after artificial ageing.
MATERIALS AND METHODS:
. 216 samples were prepared from 3 different CAD/CAM materials (LAVA Ultimate, IPS e.max CAD, VITA Suprinity) with A1 HT color at a size of 14 × 12 mm and a thickness of 0.5 ± 0.05 mm. Color measurements of the samples were performed with a spectrophotometer using color parameters and CIE Lab color system on a gray backing between baseline color and after 5000 cycles of artificial ageing in 4 stages (i.e. the first measurement before the treatment, the second measurement after polishing, the third measurement after cement application, and the fourth measurement after artificial ageing). The results were evaluated using the Variance analysis and Fisher’s LSD test.
RESULTS:
. Resin nanoceramics (LU) exhibited higher color change values than zirconia-reinforced lithium silicate (VS) and lithium disilicate (EC) ceramics after artificial ageing. Manual polishing and glazing resulted in similar color change for LU and VS (P>.05). In the EC group, glazing provided statistically different results as compared to the manual polishing and control groups (P<.05). Among the ceramic groups, color change values of the subgroup, which was treated by glazing, of the zirconia-reinforced lithium silicate (VS) and lithium disilicate (EC) samples were below the clinically acceptable level (ΔE < 3.5).
CONCLUSION
. The lowest color change for all stages was observed in Vita Suprinity.
2.The clinical success of ART restorations and Hall technique in primary molars: a randomized 18-month follow-up study
Esra OZ ; Zuhal KIRZIOGLU ; Canan KALE
Restorative Dentistry & Endodontics 2023;48(2):e19-
Objectives:
The aim of the study was to evaluate the clinical and radiographic success of the Hall technique (HT) and atraumatic restorative treatment (ART) restorations using high-viscosity glass-ionomer cement for the management of occlusal carious lesions in primary molars.
Materials and Methods:
This randomized clinical study observed 40 children (aged 5–6 years). For each child, one tooth was treated with HT and one with ART. The primary outcome measures for HT restorations were successful, minor, and major failure rates.Clinical evaluations of ART restorations were performed according to the modified United States Public Health Service criteria during 18-month follow-up. McNemar test was used for statistical analysis.
Results:
Thirty of 40 (75%) participants returned for 18 months of follow-up. In the clinical evaluations of teeth that were treated with HT, the patients did not have complaints of pain or other symptoms, all crowns remained in the oral cavity, the gums were healthy, and the teeth were functional in all evaluations. At the end of the 18-month follow-up, the surface texture and marginal integrity criteria of ART restorations were recorded as 26.7% and 33.3%, respectively. In the radiographic evaluation of 30 patients treated with ART and HT, all restorations were considered successful.
Conclusions
The 18-month clinical and radiographic results after treatments applied to singlesurface cavities in anxious children showed that both treatment methods were successful.
3.Bilateral Congenital Anophthalmos and Agenesis of the Optic Pathways.
Mustafa AKTEKIN ; Ozay OZ ; Muaffak Refik SAYGILI ; Zeliha KURTOGLU
Yonsei Medical Journal 2005;46(2):296-299
This report presents a rare example of a bilateral congenital anophthalmos and an agenesis of the optic pathways. The MR imaging studies revealed that the eyeballs, optic nerves, optic chiasm, optic tracts and optic radiation were absent. The chromosomal examination was normal. Mild mental retardation was also observed. Apart from the rarity of the anophthalmos and the total absence of the optic pathways, no etiologic reason for this pathology could be detected, which makes this case more significant.
Abnormalities, Multiple/diagnosis
;
Adult
;
Anophthalmos/*complications
;
Female
;
Humans
;
Magnetic Resonance Imaging
;
Mental Retardation/complications
;
Optic Chiasm/abnormalities
;
Optic Nerve/abnormalities
;
Visual Pathways/*abnormalities/pathology
4.Hallucinations after Ingesting a High Dose of Benzydamine Hydrochloride.
Burak CAN ; Ihsan OZ ; Husameddin OZER ; Turgay SIMSEK
Clinical Psychopharmacology and Neuroscience 2016;14(4):407-408
No abstract available.
Benzydamine*
;
Hallucinations*
5.Effect of various bleaching treatments on shear bond strength of different universal adhesives and application modes.
Fatma Dilsad OZ ; Zeynep Bilge KUTUK
Restorative Dentistry & Endodontics 2018;43(2):e20-
OBJECTIVES: The aim of this in vitro study was to evaluate the bond strength of 2 universal adhesives used in different application modes to bleached enamel. MATERIALS AND METHODS: Extracted 160 sound human incisors were used for the study. Teeth were divided into 4 treatment groups: No treatment, 35% hydrogen peroxide, 16% carbamid peroxide, 7.5% carbamid peroxide. After bleaching treatments, groups were divided into subgroups according to the adhesive systems used and application modes (n = 10): 1) Single Bond Universal, etch and rinse mode; 2) Single Bond Universal, self-etch mode; 3) Gluma Universal, etch and rinse mode; 4) Gluma Universal, self-etch mode. After adhesive procedures nanohybrid composite resin cylinders were bonded to the enamel surfaces. All specimens were subjected to shear bond strength (SBS) test after thermocycling. Data were analyzed using a 3-way analysis of variance (ANOVA) and Tukey post hoc test. RESULTS: No significant difference were found among bleaching groups (35% hydrogen peroxide, 16% carbamid peroxide, 7.5% carbamid peroxide, and no treatment groups) in the mean SBS values. There was also no difference in SBS values between Single Bond Universal and Gluma Universal at same application modes, whereas self-etch mode showed significantly lower SBS values than etch and rinse mode (p < 0.05). CONCLUSIONS: The bonding performance of the universal adhesives was enhanced with the etch and rinse mode application to bleached enamel and non-bleached enamel.
Adhesives*
;
Dental Enamel
;
Humans
;
Hydrogen Peroxide
;
In Vitro Techniques
;
Incisor
;
Shear Strength
;
Tooth
;
Tooth Bleaching
6.Efficiency of Ultrasound and Ultrasound-Guided Fine Needle Aspiration Cytology in Preoperative Assessment of Axillary Lymph Node Metastases in Breast Cancer.
Aysegul OZ ; Figen Basaran DEMIRKAZIK ; Meltem Gulsun AKPINAR ; Isil SOYGUR ; Atac BAYKAL ; Sevgen Celik ONDER ; Aysegul UNER
Journal of Breast Cancer 2012;15(2):211-217
PURPOSE: We performed this study to detect preoperative axillary metastases with ultrasound (US)-guided fine needle aspiration biopsy (FNAB), to eliminate the need for time-consuming and costly sentinel lymph node (SLN) scintigraphy and biopsy steps in the treatment of breast cancer patients, and in that of with suspicious US findings, and to evaluate the accuracy of preoperative US-guided FNAB for patients with suspicious lymph node metastases on US. METHODS: Patients with a suspicious breast lump or histopathologically proven breast cancer underwent breast-axillary US. Increase in lymph node size, cortical thickening, non-hilar cortical flow, and hilar changes were evaluated with gray scale-color Doppler US. FNAB was performed if US results were suspicious for malignancy. RESULTS: Thirty-eight axillary lymph nodes (ALN) underwent FNAB. ALN dissection, SLN scintigraphy, and biopsy steps were bypassed in 23 axillas with positive ALN FNAB (60.5%). The sensitivity of ALN FNAB was 88.46%; specificity and positive predictive value were 100%; and negative predictive value was 66.6% (inadequate cytology included; 76.7%, 100%, 100%, 53.3%, respectively). Asymmetrical cortical thickening, non-hilar cortical flow, and increase in hypoechogenity were only detected in metastatic nodes. Cortical thickening, and lymph node and breast mass size was higher in the metastatic group. CONCLUSION: By performing FNAB on suspicious lymph nodes, the routine, high-cost SLN scintigraphy and intraoperative gamma probe steps may be skipped, and axilla dissection can be performed directly. This leads to the elimination of the need for SLN investigation in more than half of the patients. The assessment of ALN metastases with preoperative US-guided FNAB is a cost-effective method with high specificity, that eliminates the need for costly and time-consuming SLN scintigraphy and biopsy steps, and helps in preoperative staging.
Axilla
;
Biopsy
;
Biopsy, Fine-Needle
;
Breast
;
Breast Neoplasms
;
Humans
;
Lymph Nodes
;
Neoplasm Metastasis
;
Nitriles
;
Pyrethrins
;
Sensitivity and Specificity
7.Pleomorphic Carcinoma of the Lung with High Serum Beta-human Chorionic Gonadotropin Level and Gynecomastia.
Kerem OKUTUR ; Baris HASBAL ; Kubra AYDIN ; Mustafa BOZKURT ; Esat NAMAL ; Buge OZ ; Kamil KAYNAK ; Gokhan DEMIR
Journal of Korean Medical Science 2010;25(12):1805-1808
Although gynecomastia is a well-defined paraneoplastic syndrome in patients with non-small cell lung cancer, the association with pleomorphic carcinoma has not been reported. A 50-yr-old man presented with bilateral gynecomastia and elevated serum beta-human chorionic gonadotropin (beta hCG) level. Chest tomography showed a mass in the right middle lobe. Right middle lobectomy and mediastinal lymph node dissection were performed. beta hCG levels decreased rapidly after surgery. Histological examination revealed pleomorphic carcinoma with positive immunostaining for beta hCG. Serum beta hCG levels began to increase gradually on postoperatively 4th month. Computed tomography detected recurrence and chemotherapy was started. After second cycle of chemotherapy, beta hCG levels decreased dramatically again and tomography showed regression in mass. Patient died 6 months later due to brain metastasis. beta hCG expression may be associated with aggressive clinical course and increased risk of recurrence, also beta hCG levels may be used to evaluate therapy response in patients with pleomorphic carcinoma.
Brain Neoplasms/radiotherapy/secondary
;
Carcinoma, Non-Small-Cell Lung/complications/*diagnosis/pathology
;
Chorionic Gonadotropin, beta Subunit, Human/*blood
;
Gynecomastia/*etiology
;
Humans
;
Lung Neoplasms/complications/*diagnosis/pathology
;
Lymph Nodes/surgery
;
Male
;
Middle Aged
;
Recurrence
;
Risk Factors
;
Tomography, X-Ray Computed
8.MMP-2, TIMP-2 and CD44v6 expression in non-small-cell lung carcinomas.
Bulent EREN ; Mehmet SAR ; Buge OZ ; Fazilet H Oner DINCBAS
Annals of the Academy of Medicine, Singapore 2008;37(1):32-39
INTRODUCTIONFactors that emerge as crucial participants in tumour invasion and metastases are matrix metalloproteinases (MMPs), tissue inhibitor of metalloproteinase (TIMP) inhibitors and cellular adhesion molecules (CD44 and similar molecules). They play important roles in tumour invasion and metastasis in non-small-cell lung carcinomas (NSCLCs).
MATERIALS AND METHODSThe study was performed using the data of 33 patients. MMP-2 from the metalloproteinase family, TIMP-2 from the metalloproteinase inhibitor family and the adhesion molecule CD44v6 expression were investigated immunohistochemically to search their role in the metastasis and the clinical outcome of the patients with NSCLCs.
RESULTSTwenty-three tumours (70%) were squamous cell carcinoma (SCC), 9 (27%) were adenocarcinoma (AC), and 1 (3%) was large cell carcinoma (LCC). MMP-2 and TIMP-2 were expressed in high rates in NSCLC but CD44v6 expression was about 50%. Lymphatic invasion was less frequent in TIMP-2- positive patients and this difference was statistically significant (P = 0.005). There was a statistically significant difference between SCCs and ACs with respect to CD44v6 tumoral expression (P = 0.004). Also, there was a negative correlation between lymphatic invasion and the extent of CD44v6; lymphatic invasion was significantly less in CD44v6-positive cases (P = 0.013).
CONCLUSIONWe found that TIMP-2 and CD44v6 can decrease the lymphatic invasion in NSCLCs. Also there was observed histiotype-related pattern of CD44v6 variant expression in SCCs.
Adult ; Aged ; Aged, 80 and over ; Biomarkers, Tumor ; Carcinoma, Non-Small-Cell Lung ; enzymology ; pathology ; Female ; Humans ; Hyaluronan Receptors ; metabolism ; Immunohistochemistry ; Male ; Matrix Metalloproteinase 2 ; metabolism ; Middle Aged ; Tissue Inhibitor of Metalloproteinase-2 ; metabolism
9.Effectiveness of medical coating materials in decreasing friction between orthodontic brackets and archwires
Nursel ARICI ; Berat S. AKDENIZ ; Abdullah A. OZ ; Yucel GENCER ; Mehmet TARAKCI ; Selim ARICI
The Korean Journal of Orthodontics 2021;51(4):270-281
Objective:
The aim of this in vitro study was to evaluate the changes in friction between orthodontic brackets and archwires coated with aluminum oxide (Al2O3), titanium nitride (TiN), or chromium nitride (CrN). In addition, the resistance of the coatings to intraoral conditions was evaluated.
Methods:
Stainless steel canine brackets, 0.016-inch round nickel–titanium archwires, and 0.019 × 0.025-inch stainless steel archwires were coated with Al2O3 , TiN, and CrN using radio frequency magnetron sputtering. The coated materials were examined using scanning electron microscopy, an X-ray diffractometer, atomic force microscopy, and surface profilometry. In addition, the samples were subjected to thermal cycling and in vitro brushing tests, and the effects of the simulated intraoral conditions on the coating structure were evaluated.
Results:
Coating of the metal bracket as well as nickel–titanium archwire with Al2O3 reduced the coefficients of friction (CoFs) for the bracket–archwire combination (p < 0.01). When the bracket and stainless steel archwire were coated with Al2O3 and TiN, the CoFs were significantly lower (0.207 and 0.372, respectively) than that recorded when this bracket–archwire combination was left uncoated (0.552; p < 0.01). The friction, thermal, and brushing tests did not deteriorate the overall quality of the Al2O3 coatings; however, some small areas of peeling were evident for the TiN coatings, whereas comparatively larger areas of peeling were observed for the CrN coatings.
Conclusions
Our findings suggest that the CoFs for metal bracket–archwire combinations used in orthodontic treatment can be decreased by coating with Al2O3 and TiN thin films.
10.Effectiveness of medical coating materials in decreasing friction between orthodontic brackets and archwires
Nursel ARICI ; Berat S. AKDENIZ ; Abdullah A. OZ ; Yucel GENCER ; Mehmet TARAKCI ; Selim ARICI
The Korean Journal of Orthodontics 2021;51(4):270-281
Objective:
The aim of this in vitro study was to evaluate the changes in friction between orthodontic brackets and archwires coated with aluminum oxide (Al2O3), titanium nitride (TiN), or chromium nitride (CrN). In addition, the resistance of the coatings to intraoral conditions was evaluated.
Methods:
Stainless steel canine brackets, 0.016-inch round nickel–titanium archwires, and 0.019 × 0.025-inch stainless steel archwires were coated with Al2O3 , TiN, and CrN using radio frequency magnetron sputtering. The coated materials were examined using scanning electron microscopy, an X-ray diffractometer, atomic force microscopy, and surface profilometry. In addition, the samples were subjected to thermal cycling and in vitro brushing tests, and the effects of the simulated intraoral conditions on the coating structure were evaluated.
Results:
Coating of the metal bracket as well as nickel–titanium archwire with Al2O3 reduced the coefficients of friction (CoFs) for the bracket–archwire combination (p < 0.01). When the bracket and stainless steel archwire were coated with Al2O3 and TiN, the CoFs were significantly lower (0.207 and 0.372, respectively) than that recorded when this bracket–archwire combination was left uncoated (0.552; p < 0.01). The friction, thermal, and brushing tests did not deteriorate the overall quality of the Al2O3 coatings; however, some small areas of peeling were evident for the TiN coatings, whereas comparatively larger areas of peeling were observed for the CrN coatings.
Conclusions
Our findings suggest that the CoFs for metal bracket–archwire combinations used in orthodontic treatment can be decreased by coating with Al2O3 and TiN thin films.