Objective To test the reliability and validity of Chinese version of Stressful Life Events Questionnaire and the influence of preinjury stressful life events on the life quality and mood symptoms of the patents following cerebral concussion.Methods 285 patients with cerebral concussion were assessed by Stressful Life Events Questionnaire(SLESQ),PTSD Checklist civilian version(PCL-C),Thirty-Six-Item Short-Form Health Survey (SF-36),Hamilton Depression Rating Scale(HDRS),Hamilton Anxiety Scale(HAMA) at baseline.The patients had been reassessed with the HDRS,HAMA,SF-36 at 3 months after cerebral concussion.The hierarchical regression analyses were used to determine the influence of Stressful Life Events for the life quality and mood symptoms of the patient with cerebral concussion.Results The incidence of stressful life events was 42.8％.The multiple regression analysis showed the experience of stressful life events were the influence factor of scores on the SF-36,HDRS,HAMA after adjusted by the age,gender,education,income,social support,the scores of anxiety and depression before injury and the R 2 value of SLESQ to SF-36 physical health factor,mental health factor,HDRS,HAMA was 0.064,0.111,0.145,0.028,respectively.Conclusion The history of stressful events is the influence factor of the patient with cerebral concussion to have poor life quality and mood disorder.

Objective: To study laparoscopic ultrasound assisted hepatectomy in treatment of intrahepatic and extrahepatic bile duct stones. Methods: The data of 52 patients with hepatolithiasis who underwent laparoscopic hepatectomy from May 2014 to January 2019 at the Fuyang District First People's Hospital in Hangzhou were analyzed retrospectively. There were 28 men and 24 women. The median age was 56 years. Operative laparoscopic ultrasonography was used to detect the location, size, distribution of stones and their relations to blood vessels. A total of 43 patients underwent anatomic hepatectomy, while 38 patients underwent choledochoscopic stone extraction. A " T" tube was used according to intraoperative conditions. Results: Laparoscopic surgery was successfully carried out in 50 patients, while conversion to open surgery was required in 2 patients because of adhesions and bleeding. Laparoscopic ultrasonography revealed intrahepatic calcifications in 5 patients and choledochoscopy in 2 patients. Postoperative complications included 5 patients who devleoped abdominal abscesses. The operation time was (289.0±132.0) minutes. The intraoperative blood loss was (451.0±256.0) ml. The hospitalization after operation was (12.0±3.0) days. In 52 patients, 4 patients had residual stones and the residual rate was 7.7%. All of them were completely removed by T-tube sinus 8 weeks after operation. Conclusions Laparoscopic ultrasound helped to detect relevant bile ducts containing stones, reduced chance of bleeding in surgery, helped to clarify location and distribution of stones, improved accuracy of diagnosis, and reduced unnecessary hepatectomy by clearly defining intrahepatic bile duct stones intraoperatively. The residual intrahepatic and intrahepatic bile duct stones rates were reduced, and the safety and accuracy of the operations were improved.

Objective: To investigate the microhardness distribution of cancellous bone in the proximal tibia and its clinical significance. Methods: Three fresh tibias were obtained and examined by X-ray and CT to exclude skeletal pathologies, such as osteoporosis, osteoarthritis. According to the Heim's square, the proximal tibias were cut off. Each of the proximal tibias was divided into three parts, the medial condyle, the intercondylar area and the lateral condyle. Each part was divided into three sections, proximal, middle and distal sections. Each of the proximal tibias was divided into 9 regions. Bone specimens with a thickness of 3 mm were taken from each region using a high precision low-speed saw and fixed on flat sheets. The microhardness of the bone tissue was measured using a Vickers microhardness tester after polish. Ten effective micro-indentation tests were conducted in each region. After measurement the diagonal length of the indentations, the microhardness values were calculated via software provided by the hardness tester. Analysis of variance and Tukey method were used to compare the microhardness values of different parts, sections and regions of cancellous bone. The microhardness distribution of the proximal tibia was analyzed. Results: A total of 270 effective indentations were made in the specimens, and the microhardness values were obtained. The average microhardness of the three proximal tibias was 40.98±3.44, 34.92±4.64 and 39.49±3.86 HV, respectively. There was a significant difference among the groups (F=55.87, P=0.000). The microhardness distribution of bone tissue in the three proximal tibias was similar. In the comparison of different parts, the microhardness of medial condyle was greater than that of the lateral condyle, which was larger than that of the intercondylar area. The difference between the parts was statistically significant (F=18.42, 8.236, 10.877; P=0.000, 0.001, 0.000). In the comparison of different sections, the microhardness of the distal section was greater than that of the proximal section, which was larger than that of the middle section. The difference between the sections was statistically significant (F=8.720, 17.140, 6.142; P=0.000, 0.000, 0.003). The microhardness distribution was similar among different regions. The region with the highest microhardness is the medial condyle of the distal section with microhardness of 44.87±3.25 HV (range 39.2-49.7 HV). The lowest microhardness was in the intercondylar area of the middle section with hardness of 29.41±4.53 HV (range 24.8-36.2 HV). Conclusion The microhardness value of cancellous bone near the articular surface at the proximal tibia was smaller, which could disperse the load and protect the fragile of articular cartilage. Furthermore, the microhardness of the transition zone is larger. The microhardness value of the cancellous bone in medial tibia condyle is the greatest, which is related to load-bearing.

Objective To study the safety,efficacy and advantages of enhanced recovery after surgery (ERAS) combined with clinical pathway management in laparoscopic common bile duct exploration and lithotomy (Laparoscopic common bile duct exploration,LCBDE).Methods 78 patients who underwent LCBDE in the Department of Hepatobiliary and Pancreatic Surgery in the First Hospital of Fuyang District in Hangzhou were selected as the non-ERAS group (the control group).76 patients who underwent LCBDE treated with fast track surgery and ERAS clinical pathway management were selected as the ERAS group.The data between the two groups which included the postoperative insulin resistance index,changes in C-reactive protein,duration of postoperative analgesic use and analgesia,timing of first passage of postoperative flatus,postoperative abdominal tube removal,postoperative bile leakage,recurrence of biliary stones,intestinal ileus and other complications.Results All the two groups were discharged home successfully.On preoperative 7 day,the differences on the postoperative insulin resistance index and the levels of C reactive protein were significantly different (P＜0.05).The time to first get out of bed after operation,the postoperative analgesic use,the time to first passage of flatus,the time to postoperative abdominal drainage tube removal,and the time to clamping of the T tube after operation were significantly different (all P＜0.05).The postoperative complications of pulmonary infection,abdominal infection and the incidence of prolonged intestinal ileus were significantly different (all P＜0.05).Conclusions ERAS combined with clinical pathway management reduced postoperative stress reaction and complication rate.The treatment accelerated recovery and shortened hospital stay for patients who underwent LCBDE,which led to good social and economic benefits.

Objective: To investigate the distribution characteristics and significance of bone hardness in different segments and layers of clavicle. Methods: The right clavicles of three fresh Chinese corpses were taken and then divided into proximal, middle and distal segments according to Allman's classification. The clavicles were cut with diamond saw in the vertical of long axis equidistant exactly into 15 layers (proximal: 3 layers; midshaft: 7 layers; distal: 5 layers), and each layer was divided into four directions: superior, inferior, anterior, and posterior. The bone hardness were measured by Vickers microindentation, HV(kgf/mm²). The distribution of bone hardness was recorded and analyzed. Results: A total of 180 parts of cortical bone were measured, generating 900 measurements. Meanwhile, a total of 45 parts of cancellous bone were measured, generating 225 measurements. We found that: (1)The average hardness of cortical bone was (35.9±8.1)HV, and the midshaft segment [(41.3±6.8)HV] was harder than the proximal segment [(33.8±6.1)HV] and the distal segment [(29.7±5.4)HV](P<0.05); (2)The average hardness of cancellous bone was (30.7±6.2)HV, and there were significant differences among the midshaft segment [(34.5±5.5)HV], the proximal segment [(29.2±2.9)HV] and the distal segment [(26.3±5.1)HV](P<0.05); (3)for cortical bone, the hardest segment was the fifth layer of the midshaft segment [(44.8±8.6)HV] while the most soft segment was the fourth layer of the distal segment [(28.0±3.5)HV](P<0.05); (4)for cancellous bone, the hardest segment was the fifth layer of the midshaft segmnet [(36.8±5.1)HV] while the most soft was the fifth layer of the distal segment [(23.0±4.4)HV](P<0.05); (5)There were no statistically significant differences among four directions of segments(P>0.05). Conclusion The microindentation hardness varies greatly among different segments and layers of the clavicles. The cortical bone and cancellous bone have consistent hardness changes, which shows that the middle segment is obviously harder than the proximal and distal segments with a gradually gradient decreasing trend from the middle to both ends. The data can be used to guide the design of 3D printing implants that conform to the stress conduction characteristics of the clavicle under physiological conditions, and provide good data support for the modeling and finite element analysis of the clavicle under simulated physiological conditions.