Objective To investigate the predictive value of peripheral leukocyte and its subtypes count on cerebral-cardiovascular events in patients with unstable angina pectoris.Methods From December 2000 to January 2003,141 patients(aged 41-84 years) with unstable angina pectoris referred for coronary angiography were enrolled and their peripheral leukocyte and its subtypes were counted.The major adverse cerebral-cardiovascular events rate of these patients during 46.2?6.6 months of follow-up were assessed.Results A total of 55 cerebral-cardiovascular nonfatal events and 8 deaths were observed.After adjusting the risk factors of diabetes mellitus,smoking,hypertension,hyperlipidemia,prior myocardial infarction,family history,and blood fibrinogen and uric acid level,leukocyte count was positively associated with cerebral-cardiovascular events(adjusted relative risk 1.31,95% CI 1.15 to 1.49).The monocyte count in patients with cerebral-cardiovascular events was higher than that in patients without cardiovascular events(P

Animals ; Arteritis Virus, Equine ; chemistry ; genetics ; Horses ; Open Reading Frames ; Viral Nonstructural Proteins ; chemistry ; physiology ; Viral Structural Proteins ; chemistry ; physiology

Porcine Reproductive and Respiratory Syndrome virus (PRRSV) is the etiological agent of Por- cine Reproductive and Respiratory Syndrome. We summarized the recent research progress on molecular bi- ology of PRRSV including the structure of genome, viral structural and Non-structural protein.

Objective To explore the clinical application of 3D-printing model in guiding interventional management of Budd-Chiari syndrome (BCS) and in teaching practice.Methods A patient with typical BCS of inferior vena cava type was selected.By using MR enhanced scanning,the original MRA data of DICOM format were extracted,and then the digital data were extracted and reconstructed to obtain 3D BCS model by Simpleware software.The 3D BCS entity model,using 1 ∶ 1 ratio,was printed out by a 3D printer.An experienced chief physician made a simulated interventional manipulation on this 3D BCS entity model.Results The BCS 3D model was successfully printed.Simulated operation could be easily performed on the 3D-printing model,in this way the chief physician could make a demonstration of interventional procedure of BCS to the junior doctors and medical students.Interventional therapeutic manipulation for BCS could be well demonstrated on the 3D-printing model of BCS,which was very helpful in guiding teaching practice and in promoting the communication between doctors and patients.Conclusion The BCS 3D-printing model can truly reflect the spatial architecture features of the inferior vena cava and the hepatic veins,which are very valuable for the making of surgical plan,for the demonstration of simulation operation,and for teaching practice.Moreover,3D-printing model can stereoscopically display the location and morphology of the lesion,which can improve patient's understanding of the disease,thus,the communication between doctors and patients can be strengthened.

Objective To evaluate the safety and efficacy of interventional treatment of occlusion of the entire inferior vena cava (IVC).Methods The clinical data of 6 patients with entire IVC occlusion were analyzed retrospectively.All patients were diagnosed by color Doppler ultrasound and DSA.Venography was performed under local anesthesia via internal jugular vein and femoral vein approach.The occlusion of IVC and hepatic vein were treated with balloon dilatation and/or stent placement.Follow-up examination with color Doppler ultrasound was taken 1,3,6,12 months after treatment and annually thereafter to assess the patency of IVC and hepatic vein.The pressure gradient of hepatic vein-right atrium and IVC-right atrium before and after interventional treatment were compared with paired t test.Results In 5 cases,both IVC and 1 hepatic vein were recanalized successfully.In 1 case,recanalization of IVC failed,but the right hepatic vein was recanalized successfully.The mean pressure gradient of hepatic vein-right atrium decreased from (23.2 ± 2.0) cmH2O (1 cmH2O =0.098 kPa) before treatment to (8.7 ± 3.2) cmH2O after treatment in 6 cases (t =21.6,P ＜ 0.05).The mean pressure gradient of IVC-right atrium decreased from (26.6 ± 2.7) cmH2O before treatment to (9.4 ± 1.1) cmH2O after treatment (t =16.1,P ＜ 0.05).Abdominal pains occurred in 3 patients after stent implantation which disappeared in 24 hours.No other complications such as bleeding and death occurred.During a mean follow-up of(42 ± 27)months (16 to 90 months),hepatic vein patency was maintained in 6 cases and IVC patency was maintained in 5 cases.Conclusion Interventional treatment of occlusion of the entire IVC is a safe and effective method.

Objective To investigate the value of guide-wire loop in interventional therapy of patients with Budd-Chiari syndrome with hepatic vein obstruction.Methods A retrospective study was conducted on 25 patients with Budd-Chiari syndrome (BCS) with hepatic vein obstruction treated from May 2011 to August 2014.The technique of guide-wire loop was used in these patients.The pressure of the hepatic vein was measured before and after treatment.The difference in the pressure was analyzed by the t test.Results All the patients were treated successfully using guide-wire loop angioplasty.No complications of bleeding,pericardial tamponade and liver capsule hemorrhage were observed.After treatment,the pressure of the hepatic vein reduced from (48.3± 8.0) cmH2O to (20.9 ± 3.8) cmH2O (t =26.82,P ＜ 0.05);The symptoms and physical signs of the patients were relieved or disappeared.BCS-related symptoms reappeared on follow-up in 4 patients,2 were treated by balloon dilation successfully.1 patient was treated with transjugular intrahepatic portosystemic shunt (TIPS) because of decompensated liver cirrhosis.1 patient with ankylosing spondylitis had treatment failure and the symptoms relapsed for the third time.Conclusion The technique of guide-wire loop in interventional therapy of patients with Budd-Chiari syndrome with hepatic vein obstruction is safe and effective,and it can improve the overall success rate of treatment.

Objective To establish a three-dimensional (3D) model of the diaphragm type of Budd-Chiari syndrome (BCS) with perforated membrane,to analyze changes of hemodynamic parameters pre and post percutaneous transluminal angioplasty (PTA) and to analyze any possibly related mechanical factors for postoperative recurrence in BCS.Methods The data on enhanced MRI from patients suffering from BCS with perforated diaphragm of inferior vena cava were reconstructed into a 3D model Computational fluid dynamics (CFD) were applied for numerical simulation based on the model,and the results were expressed as cloud images.Results The total number of model units of the finite element model for preoperative inferior vena cava stenosis was 16 422,and the total number of nodes was 48 170.The total number of model units for postoperative inferior vena cava was 16 539,and the total number of nodes was 51 339.Hemodynamic patterns of the lesion areas were effectively reflected in the 3D flow dynamic model for BCS.By comparing the hemodynamic parameters before and after interventional therapy,the data indicated that there was a gradual decline in wall pressure from the telecentric side.The largest blood flow velocity as well as wall shear stress were observed in the stenotic area of inferior vena cava.Both a large postoperative vascular central velocity and a low increase in local pressure predicted occurrence of vascular restenosis.Conclusions The establishment of a 3D fluid model of inferior vena cava revealed that there were mechanical changes in the location of the lesion.Variations in blood flow patterns exert a far-reaching influence on distribution of hemodynamic parameters,including local blood flow velocity,vascular wall pressure and shear stress.All these might be related to recurrence of BCS after interventional therapy.

Objective To explore the therapeutic efficacy of endovascular embolization for the treatment of tiny intracranial aneurysms (≤3.0 mm) and to discuss its technical skill. Methods During the period from Dec. 2010 to July 2013, a total of 12 patients with tiny intracranial aneurysms (≤3.0 mm) were admitted to authors’ hospital to receive endovascular embolization therapy. Of the 12 patients, narrow-necked aneurysm (neck-to-body ratio ≤0.5) was seen in 7 and embolization with coils only was carried out, while wide-necked aneurysm (neck-to-body ratio > 0.5) was seen in 5 and stent-assisted coils embolization was adopted. Based on Raymond grading standard, the immediate therapeutic results were evaluated, and the procedure-related complications were recorded. Thirty days after the treatment , GOS grade was used to assess the results. Follow-up evaluation with angiography or through call was conducted. Results Successful embolization of the aneurysm was obtained in all the 12 aneurysms , with a success rate of 100%. Angiography performed immediately after the treatment showed that complete embolization was achieved in 8 aneurysms (66.7%) and residual aneurysm cavity was seen in 4 aneurysms (33.3%). GOS grading indicated that 12 cases belonged to grade V. The 12 patients were followed up for 1 - 12 months through telephone , and no re-bleeding occurred. Conclusion For the treatment of tiny intracranial aneurysms (≤ 3.0 mm), endovascular embolization is feasible although its safety and efficacy need to be further observed.

Objective To explore the clinical efficacy of 1251 stent implantation in treatment of malignant tracheal stenosis with the help of ventilation catheter under local anesthesia.Methods Totally 180 consecutive patients with malignant tracheal stenosis underwent 125I airway stent implantation were analyzed retrospectively.The anhelation grade,oxygen saturation and respiratory rate before and after operation were recorded and analyzed,125I stent situation,clinical symptoms and survival situation were followed up after operation.Results The success rate of 125I stent placement was 100％ (180/180),and the stent type was tubular stent in 132 cases,Y-shaped stent in 34 cases,and L-shaped stent in 14 cases.Dyspnea was significantly relived in all patients.Oxygen saturation and respiratory rate improved from (80.60±3.87)％ and (29.36± 3.20)times/min before operation to (94.31±3.40)％ and (19.29±2.19)times/min after operation (t=-30.52,35.09,both P＜0.01).Patients were followed up 3-13 mouth after operation,and stent restenosis were occurred in 6 patients.The lifetime was 49-401 days and the average lifetime was (182±94) days.The 60-day survival rate was 0.99 and the 180-day survival rate was 0.65.Conclusion 125I stent implantation in treatment of malignant tracheal stenosis with the help of ventilation catheter under local anesthesia is a safe and effective method.

Background The application of femtosecond laser in the corneal refractive surgery has made great progression recent years,but the morphology characteristic of corneal stroma surface after making-flap of femtosecond laser is closely concerned.Objective This study was to analyze the influence of photodisrnption of femtosecond laser on the corneal stroma surface and to investigate the effect of different laser pulse energy on the sudace ultrastructure of corneal stroma.Methods Corneal flaps were made with Visu Max femtosecond laser in 16 fresh porcine eyes with the pulse energy 125 nJ,155 nJ and 195 nJ respectively,and Moria-M2 microkeratome was used as control.Scanning electron microscopy (S-3400N Hitachi High-Technologies Corp) was used to observe and compare the ultrastructural characteristic of corneal stroma bed surface after making of corneal flap.Results The corneal strnma was evaporated and created a smooth surface when photodisrnption happened in the femtosecond laser group.Residual tissue bridges could been exhibited among the cavitation bubbles under the scanning electron microscope.Corneal strnma surface was smooth in the 125 nJ pulse energy group,but some tissue bridges still were visible.In the 155 nJ pulse energy group,much more smooth surface was seen without tissue bridges and mechanical damages on the corneal surface.However,the surface quality was worse and many tissue bridges and grooves existed in the 195 nJ pulse energy group.In addition,different sizes of slots caused by big cavitation bubbles were visible with the round and oval shape.The edges were regular and sharp with small damage zone after cutting with femtoseeond laser.However,many elevated fibril tissues could be seen on the corneal surface after making of flap with microkeratome.Many crimp and irregularity tissues were found on the surface.Blunt surface and indentations appeared in the cutting edge.Conclusions The mierostrueture of corneal stroma surface is more smoother after making of corneal flap with fentosecond laser in comparison with microkeratome.Pulse energy of 155 nJ is preferably during the making-flap with femtosecond laser.