The purpose of this study was to compare the cytotoxicity by MTT test and genotoxicity by Ames test of new calcium phosphate-based root canal sealers (CAPSEAL I, CAPSEAL II) with commercially available resin-based sealers (AH 26, AH Plus), zinc oxide eugenol-based sealers (Tubliseal EWT, Pulp Canal Sealer EWT), calcium hydroxide-based sealer (Sealapex), and tricalcium phosphate based sealers (Sankin Apatite Root Canal Sealer I, II, III). According to this study, the results were as follows: 1. The extracts of freshly mixed group showed higher toxicity than those of 24 h set group in MTT assay (p < 0.001). 2. CAPSEAL I and CAPSEAL II were less cytotoxic than AH 26, AH Plus, Tubliseal EWT, Pulp Canal Sealer EWT, Sealapex and SARCS II in freshly mixed group (p < 0.01). 3. AH 26 in freshly mixed group showed mutagenicity to TA98 and TA100 with and without S9 mix and AH Plus extracts also were mutagenic to TA100 with and without S9 mix. 4. Tubliseal EWT, Pulp Canal Sealer EWT and Sealapex in freshly mixed group were mutagenic to TA100 with S9 mix. 5. Among those of 24 h set groups, the extracts of SARCS II were mutagenic to TA98 with and without S9 mix and AH 26 showed mutagenic effects to TA98 with S9 mix. 6. No mutagenic effect of CAPSEAL I and CAPSEAL II was detected. 7. There is no statistically significant difference between CAPSEAL I and CAPSEAL II at MTT assay and Ames test in both freshly mixed group and 24 h set group.
Calcium* ; Dental Pulp Cavity* ; Zinc Oxide

Aims: Edible coatings developed from biodegradable materials such as starch and zinc oxide nanoparticles (ZnO-NPS) are efficient antimicrobials that could be used as a food additive to reduce the bacterial load on the food surface. Therefore, this study was aimed to examine the effect of chemical and green synthesized ZnO-NPS with different concentrations on the survival of Escherichia coli and Staphylococcus aureus in fish fillets during chilling storage at 4 ± 1°C. Methodology and results: ZnO-NPS were chemically prepared by mixing zinc acetate dihydrate with sodium hydroxide. Lavandula officinalis was used for the green synthesis of ZnO-NPS. The sterile biodegradable coating containing 2 and 5% of both chemically and green synthesized ZnO-NPS were made using starch, gelatin, xanthan gum and glycerol. Different bacterial cocktail strains of both E. coli and S. aureus were inoculated onto Tilapia fillet samples. The coating solution with different antimicrobials was aseptically spread in Tilapia fillets and examined periodically within two days intervals for the survival of S. aureus and E. coli during chilling at 4 ± 1 °C. Both chemically and plantsynthesized ZnO-NPS reduced the growth of both S. aureus and E. coli by about 3.7 log10 CFU/cm2 of Tilapia fillet. The incorporation of L. officinalis increased the antibacterial activity of ZnO-NPS. Staphylococcus aureus was more sensitive than E. coli for both chemically and plant-synthesized ZnO-NPS. Moreover, zinc oxide biodegradable coating extended the shelf-life of chilled Tilapia fillets by about 4 days. Conclusion, significance and impact of study The results of the current study demonstrated the incorporation of L. officinalis into ZnO-NPS biodegradable coating which may be promising in reducing microbial growth on food surfaces.
Seafood ; Zinc Oxide ; Staphylococcus aureus ; Escherichia coli

Background: Verruca vulgaris are scaly, rough papules or nodules caused by the human papilloma virus. Objective: To determine the efficacy and safety of topical zinc oxide ointment versus topical salicylic acid + lactic acid ointment as treatment among patients with verruca vulgaris. Methods: This randomized, double-blind, 6-week study involved 29 patients with verruca vulgaris in a tertiary center who received zinc oxide 20% ointment or salicylic acid 15% + lactic acid 15% ointment applied daily and occluded with LeukoplastTM tape. Evaluation was done every two weeks. Results: There was significant decrease in number of warts in the zinc oxide group (p=0.004), while it was not significant in the salicylic acid+lactic acid group (p=0.392). Comparison between the two groups was not significant (p>0.05). Both zinc oxide (P=0.000) and salicylic acid+lactic acid groups (P=0.025) had significant decrease in size of warts from baseline to 6th week of observation. No significant differences were observed between the two groups in terms of adverse events such as erythema (P>0.05), edema (P>0.05), tenderness (P>0.05), and scaling (P>0.05); however, itching was significantly higher at 4th week in the salicylic acid+lactic acid group B (16.7%). Among the zinc oxide group, 100% would recommend the treatment, while only 71.4% would recommend salicylic acid+lactic acid. The satisfaction levels of zinc oxide group were also statistically higher than salicylic acid+lactic acid group (p=0.000). Conclusion Zinc oxide 20% ointment is a safe and effective option for the treatment of verruca vulgaris especially among patients that would prefer non-traumatic measures in the removal of their warts.
Zinc Oxide ; Salicylic Acid ; Lactic Acid

OBJECTIVES: This study was aimed to determine the effects of temporary sealing materials on microtensile bond strength between resin-coated dentin and resin inlay and to compare the bonding effectiveness of delayed dentin sealing and that of immediate dentin sealing. MATERIALS AND METHODS: The teeth were divided into 4 groups: group 1, specimens were prepared using delayed dentin sealing after temporary sealing with zinc oxide eugenol (ZOE); group 2, specimens were prepared using immediate dentin sealing and ZOE sealing; group 3, specimens were prepared using immediate dentin sealing and Dycal (Dentsply) sealing; group 4, specimens were prepared using immediately sealed, and then temporarily sealed with a resin-based temporary sealing material. After removing the temporary sealing material, we applied resin adhesive and light-cured. Then the resin inlays were applied and bonded to the cavity with a resin-based cement. The microtensile bond strength of the sectioned specimens were measured with a micro-tensile tester (Bisco Inc.). Significance between the specimen groups were tested by means of one-way ANOVA and multiple Duncan's test. RESULTS: Group 1 showed the lowest bond strength, and group 4 showed the highest bond strength (p < 0.01). When temporary sealing was performed with ZOE, immediate dentin sealing showed a higher bonding strength than delayed dentin sealing (p < 0.01). CONCLUSIONS: Based on these results, immediate dentin sealing is more recommended than delayed dentin sealing in bonding a resin inlay to dentin. Also, resin-based temporary sealing materials have shown the best result.
Adhesives ; Calcium Hydroxide ; Dentin ; Eugenol ; Inlays ; Minerals ; Tooth ; Zinc Oxide

Zinc oxide nanoparticle (nano-ZnO) has a size between 1 and 100 nm. Nano-ZnO has some special effects, such as small size effect, surface effect, quantum size effect, which makes it different from the ordinary ZnO, and is widely used in rubber industry, food processing, cosmetics and pharmaceutical fields. It has been reported that nano-ZnO has toxic effects in vitro and in vivo, but the mechanism of toxicity is still unclear. Therefore, it is important to evaluate the safety nano-ZnO by studying its biological toxic effects and related mechanisms. In this paper, we summarize the characterization, ingestion pathway, metabolism, systematic toxicity of nano-ZnO and its mechanisms, which may provide us with new strategy for the toxic research of nano-ZnO.
Animals ; Humans ; Metal Nanoparticles ; toxicity ; Zinc Oxide ; toxicity

The Inhalation of certain freshly formed metal oxides can cause metal fume fever, which is an acute, self-limiting, flu-like illness. The most common cause of this syndrome is the inhalation of zinc oxide. The inhalation of zinc oxide can lead to tracheobronchiolitis, chemical pulmonary edema or to respiratory failure and acute respiratory distress syndrome(ARDS). We encountered a 43-years-old man who developed severe dyspnea after inhaling of zinc oxide while working for 5 hours in a closed space. He was diagnosed with ARDS and was treated successfully with glucocorticoid. We report a case of ARDS caused by the inhalation of zinc fumes.
Acetylcysteine ; Dyspnea ; Fever ; Inhalation* ; Oxides ; Pulmonary Edema ; Respiratory Distress Syndrome, Adult* ; Respiratory Insufficiency ; Zinc Oxide ; Zinc*

The purpose of this study was to compare the retentive values of various dental cements used for cementing the orthodontic bands on the teeth. Sound freshly extracted human premolar teeth were selected for the study. Eleven commercial dental cements (Zinc phosphate, reinforced Zinc-oxide eugenol, Carboxylate and Glass ionomer cements) were handled under standardized conditions. All cemented speciments were then kept in a thermostatic humidor cabinet regulated at 23+/-2degreesC and more than 95% relative humidity and tested after 24 hours and 1 week each. The force required to remove the cemented orthodontic bands from the teeth was determined on an Instron Universal Testing Machine using a modified specimen holding device with. a crosshead speed of 0.20mmlmin. The results obtained were as follows: 1. The retentive values of the band cemented with zinc phosphate cements and carboxylate cements were considerably higher than those of the reinforced zinc oxide-eugenol and glass ionomer cements. 2. There was no significant difference between the retentive value of carboxylate cements as compared with zinc phosphate cements. 3. The retentive value of the reinforced zinc oxide eugenol cements was lowest all of the cements. 4. The retentive values expressed for all cements up to at least one week were highly but no significant difference was found between the 24-hour and 7 day time intervals.
Bicuspid ; Dental Cements* ; Eugenol ; Glass ; Glass Ionomer Cements ; Humans ; Humidity ; Tooth ; Zinc ; Zinc Oxide

OBJECTIVES: To appraise the effectiveness of platelet-rich fibrin (PRF) in the management of established dry socket in terms of pain, inflammation, and wound healing. MATERIALS AND METHODS: Two hundred patients with established alveolar osteitis were studied to determine the efficacy of PRF and zinc oxide eugenol (ZOE) for pain control, inflammation reduction, and wound healing. Patients were randomly allocated to Group A (PRF) or Group B (ZOE). Patients were examined on the 1st, 3rd, 7th, and 14th postoperative day and evaluated for pain using visual analogue scale scores, inflammation with a gingival index score, and wound healing through a determination of the number of bony walls exposed. RESULTS: Group A showed better results in terms of pain remission, control of inflammation, and wound healing compared to Group B. Results between groups were statistically significant (P<0.05). CONCLUSION: PRF is a better alternative than ZOE for the effective management of alveolar osteitis.
Dry Socket ; Eugenol ; Fibrin ; Humans ; Inflammation ; Periodontal Index ; Wound Healing ; Wounds and Injuries ; Zinc Oxide ; Zinc

The main disadvantage of cement-retained implant restorations is their difficulty in retriev-ability. Advocates of cemented implant restorations frequently state that retrievability of the restoration can be maintained if a provisional cement is used. The purpose of this study was to find the optimal properties of provisional luting cements and the surface treatment of abutments in single implant abutment system. 30 prefabricated implant abutments, height 8mm, diameter 6mm, 3-degree taper per side, with light chamfer margins were obtained. Three commercially available provisional luting agents which were all zinc oxide eugenol type ; Cavitec, TempBond and TempBond NE were eval-uated. No cement served as the control. TempBond along with vaseline, a kind of petrolatum(2:1 ratio) was also evaluated. Ten out of thirty abutments were randomly selected and abutment surfaces were sandblasted with 50 mu m aluminum oxide. Another ten abutments were sandblasted with 250 mu m aluminum oxide. A vertical groove, 1 mm deep and 5mm long was cut in each twenty abutments. Ten of them were sandblasted with 50 mu m aluminum oxide. The full coverage casting crowns were cemented to the abutments with the designat-ed provisional luting agent. Specimens were stored in distilled water at 37 degrees C for 24 hours. Each specimen was attached to a universal testing machine. A crosshead speed of 0.5mm/min was used to apply a tensile force to each specimen. Within the limitations of this in vitro study, the following conclusions were drawn: 1. Tensile bond strength of provisional luting cements in no surface treatment decreased with the sequence of TempBond NE, TempBond, Cavitec, TempBond with vaseline, no cement. 2. Tensile bond strength more increased by surface treatment. Sandblasting with 250 mumaluminum oxide exhibited the highest tensile bond strength in the abutment cemented with TempBond NE and sandblasting with 50 mu m aluminum oxide exhibited the highest tensile bond strength in cemented with TempBond. 3. In the aspect of a groove formation, tensile bond strength significantly increased in TempBond with vaseline only and the others had no significant effect on tensile bond strength.
Aluminum Oxide ; Crowns ; Dental Cements ; Eugenol ; Petrolatum ; Prostheses and Implants* ; Water ; Zinc Oxide

OBJECTIVES: Recurrent caries was partly ascribed to lack of antibacterial properties in composite resin. Silver and zinc nanoparticles are considered to be broad-spectrum antibacterial agents. The aim of the present study was to evaluate the antibacterial properties of composite resins containing 1% silver and zinc-oxide nanoparticles on Streptococcus mutans and Lactobacillus. MATERIALS AND METHODS: Ninety discoid tablets containing 0%, 1% nano-silver and 1% nano zinc-oxide particles were prepared from flowable composite resin (n = 30). The antibacterial properties of composite resin discs were evaluated by direct contact test. Diluted solutions of Streptococcus mutans (PTCC 1683) and Lactobacillus (PTCC 1643) were prepared. 0.01 mL of each bacterial species was separately placed on the discs. The discs were transferred to liquid culture media and were incubated at 37degrees C for 8 hr. 0.01 mL of each solution was cultured on blood agar and the colonies were counted. Data was analyzed with Kruskall-Wallis and Mann-Whitney U tests. RESULTS: Composites containing nano zinc-oxide particles or silver nanoparticles exhibited higher antibacterial activity against Streptococcus mutans and Lactobacillus compared to the control group (p < 0.05). The effect of zinc-oxide on Streptococcus mutans was significantly higher than that of silver (p < 0.05). There were no significant differences in the antibacterial activity against Lactobacillus between composites containing silver nanoparticles and those containing zinc-oxide nanoparticles. CONCLUSIONS: Composite resins containing silver or zinc-oxide nanoparticles exhibited antibacterial activity against Streptococcus mutans and Lactobacillus.
Agar ; Anti-Bacterial Agents ; Composite Resins* ; Culture Media ; Lactobacillus* ; Nanoparticles* ; Silver* ; Streptococcus mutans* ; Streptococcus* ; Tablets ; Zinc Oxide* ; Zinc*