Objective To establish a HPLC method for the determination of the content of emodin and chrysophanol in Cigu Xiaozhi pill.Methods The chromatographic procedure was carried out in Symmetry C18(4.6 mm?150 mm,5.0 ?m) column with methanol-0.1% phosphoric acid(85∶15) as the mobile phase,flow rate was 0.8 mL/min,column temperature was 20 ?C,and the detection wavelength was 423 nm.Results Emodin and chrysophanol were well separated with other components.The standard curves of emodin and chrysophanol showed linearity in the range of 0.25～0.75 ?g.The average recoveries were 101.35%(RSD=2.26%) and 98.66%(RSD=1.74%) respectively.Conclusion The method is sensitive,simple and accurate,and can be used for the determination of emodin and chrysophanol in Cigu Xiaozhi pill.

Objective To establish an RP-HPLC method for the determination of the content of safflor yellow A in Zhanjing Tinctura. Methods The chromatographic procedure was carried out in Symmetry C18 column(4.6mm?150 mm,5.0?m)with methanol-water-glacial acetic acid(7:93∶2)as the mobile phase,pH=2.80. The flow rate was 1.0 mL?min-1,column temperature was 20℃,and the detection wavelength was 402 nm. Results Safflor yellow A was well separated from other components. The standard curves of safflor yellow A showed linearity in the range of 0.096～0.960?g (r=0.9999). The average recovery was 98.80% with RSD being 2.95%(n=9). Conclusion This method is sensitive,simple and accurate,and can be used for the determination of safflor yellow A in Zhanjing Tinctura.

Objective To study the effects of Alternariol(AOH) on DNA polymerase ?(DNA POL?)expression in NIH3T3 cells.Methods RT-PCR,Immunocytochemistry and Western blot were used to detected mRNA and the protein levels of DNA POL? in NIH3T3 cell line induced by AOH.Results The expression of DNA POL? in NIH3T3 cells contaminated by AOH was significantly higher than that in the control group(P

Objective To optimize the granularity and decocting process of Codonopsis Radix decoction.Methods Adding water,soaking time and decoction time were set as examine factors,and flavonoids,total polysaccharides,and extract yield were set as the indexes,AHP-entropy weight method combined with the Box-Behnken design-response surface method were used to determine the best particle size and the technological parameters of Codonopsis Radix decoction.Results The optimum size of precise Codonopsis Radix decoction was 4.00-4.75 mm(4-5 mesh);the optimum decocting process was 13 times the amount of water added;the soaking time was 15 min;the decocting time was 10 min.Conclusion The granularity of Codonopsis Radix decocting powder optimized in this study is scientific and reasonable,which is suitable for practical production.The established decocting process is convenient,reasonable and feasible,and provides a theoretical basis for the industrial production of decocting powder.

AIM:To establish and characterize the patient-derived esophageal squamous-cell carcinoma xeno-graft (PDECX) in mice.METHODS:The samples of human esophageal cancer were grafted into severe combined immu-nodeficient ( SCID) mice.The xenografts were transferred to SCID mice when the first passage of xenografts grew up .The growth of tumors in the first, second and third passages was observed .HE staining was performed.The expression of CK5/6, p63 and p40 in the patient samples , and the first and third passages of the xenografts were detected by immunohisto-chemical analysis.The expression of mTOR, p-mTOR, p70S6K, p-p70S6K, Akt1, p-Akt (Ser473), Erk1/2 and p-Erk1/2 were determined by Western blot .RESULTS:The PDECX was successfully established .The positive expression of CK5/6, p63 and p40 in the xenografts was consistent with that in the patients ’ samples.The levels of phosphorylated and total proteins of proliferation-related signaling pathways were different in the xenografts from different patients .CONCLU-SION:The PDECX model adequately reflects the tumal heterogeneity that is observed in the patients .

Steaming is one of the commonly used methods in the processing of Chinese materia medica,which can be used to change the medicinal properties,expand the scope of use,enhance the efficacy,reduce side effects and facilitate slicing.By reviewing ancient herbal texts and literature,this article summarized the historical development of TCM steaming:from the Spring and Autumn period to the Warring States period,it has mainly gone through the stages of germination,growth,maturity,and prosperity.It further sorted out the research progress of modern steaming from the aspects of steaming technology,chemical composition and drug effect changes before and after steaming,and analyzed and discussed the establishment of quality standards of steamed products and the development of traditional and modern processing techniques,with a view to clarifying the mechanism of steaming,and providing basis for standardizing steaming technology,improving the quality standards of steamed decoction pieces and rational clinical application.

Diarrhea is the most common clinical symptom of the digestive system,its pathogenesis may be related to intestinal infection,intestinal microecological instability,intestinal barrier dysfunction and so on.Sijunzi decoction has the effect of invigorating spleen and nourishing stomach,and supplementing qi and blood.In modern clinical practice,modified Sijunzi decoction combining with other prescriptions,Chinese medicine massage,acupuncture and western medicine attenuates synergies,improves the patients'quality of life,and is widely used in the treatment of diarrhea,but its mechanism has not yet been systematically clarified.Therefore,this article reviews the research progress of the mechanism and clinical application of Sijunzi decoction and its modified formula in the treatment of diarrhea,and provides reference for the mechanism research and prevention of Sijunzi decoction and its modified formula in the treatment of diarrhea.

Objective To evaluate the key production process of Jiangshi Granules based on the new mode of combining fingerprint and quantity-value transfer relationship.Methods The fingerprints of Jiangshi Granules extract,extractum and granules were established by HPLC.The common peak transfer number of the fingerprint,the calculation of multi-component content transfer rate,and the paste rate were set as indicators to analyze the quantity and mass transfer law in the production process.The rationality of the preparation process design of Jiangshi Granules was evaluated.Results The fingerprints of 10 batches of Jiangshi Granules extract,extractum and granules were established.17 common peaks were calibrated and 8 peaks were identified.They were respectively tangshenoside I,liquiritin,lobetyolin,isoliquiritin apioside,isoliquiritin,liquiritigenin,glycyrrhizic acid,atractylenolide Ⅲ;the average transfer rates of 8 components from decoction pieces to extract were 29.42%,51.26%,23.81%,34.45%,28.29%,30.22%,42.67%,26.10%;the average transfer rates of extract to extractum were 50.05%,60.04%,51.04%,50.27%,47.60%,52.44%,53.44%,44.97%;the average transfer rates of extractum to granules were 64.83%,78.74%,70.16%,66.56%,70.62%,69.59%,76.97%,66.43%.Conclusion The established fingerprint of Jiangshi Granules extract,extractum and granules is stable and reliable,which emphasizes the integrity of the research process of TCM preparations and provides a basis for the quality control of Jiangshi Granules in the production process.

BACKGROUND:Prosthesis loosening and wear are still the main problems in the failure of total ankle replacement,which are closely related to the micro-motion of the implant-bone interface,the contact stress of the articular surface and joint motion.The design of artificial joint components,including insert and tibial/talar stem prosthesis,is a key factor affecting the force,motion,and micromotion of the contact interface of the ankle joint.The development of new inserts is of great significance to improve the survival rate of artificial ankle joints. OBJECTIVE:The finite element model of the total ankle replacement model was constructed to detect the biomechanical properties of the porous structure-optimized inserts,and the effect of the porous structure-optimized inserts on reducing prosthesis micromotion and improving the contact behavior of the articular surface was analyzed. METHODS:Based on the CT scan data of the right ankle joint of a healthy adult and the INBONE Ⅱ system product manual,a three-dimensional model including bone and artificial joint system was established,and the total ankle replacement model(model A)was obtained after osteotomy and prosthesis installation,and then through four new types of inserts,G50,G60,D50,and D60,were obtained by transforming the porous structure of the original insert,and the original one was replaced with different inserts to establish an optimized total ankle replacement model(models B-E)corresponding to the inserts.The gait loads were applied on the five models to simulate the gait conditions.The differences in micromotion and articular surface contact behaviors at the implant-bone interface of all five models were compared. RESULTS AND CONCLUSION:(1)In the gait cycle,the micromotion of the prosthesis of the four optimized total ankle replacement models was lower than that of the original model.Compared with model A,the micromotion of the prosthesis in models B-E decreased by 5.4%,10.1%,8.1%,and 20.9%,respectively.The high micromotion area of t ??he tibial groove dome in the optimized model was significantly smaller than that of the original model.(2)The four optimized models obtained a larger articular surface contact area.Compared with model A,the average contact area of t ??he inserts in models B-E increased by 11.8%,14.7%,8.1%,and 32.6%,respectively.(3)Similar to the effect of increasing the contact area,compared with the original model,the contact stress of the optimized model decreased in varying degrees,and the value of model E decreased the most significantly(P<0.05),it is due to good mechanical properties and large porosity of the Diamond lattice that constitutes the D60-type insert.(4)The research results show that the use of porous structure to improve the inserts can improve the elasticity of the inserts and increase its ability to absorb joint impact,for favorable conditions are created for reducing micromotion at the implant-bone interface and improving joint contact behavior.

Objective: To establish comprehensive laboratory reference intervals for Chinese children. Methods: This was a cross-sectional multicenter study. From June 2013 to December 2014, eligible healthy children aged from 6-month to 17-year were enrolled from 20 medical centers with informed consent. They were assessed by physical examination, questionnaire survey and abdominal ultrasound for eligibility. Fasting blood samples were collected and delivered to central laboratory. Measurements of 15 clinical laboratory parameters were performed, including estradiol (E2), testosterone(T), luteinizing hormone(LH), follicle-stimulating hormone(FSH), alanine transaminase(ALT), serum creatinine(Scr), cystatin C, immunoglobulin A(IgA), immunoglobulin G(IgG), immunoglobulin M(IgM), complement (C3, C4), alkaline phosphatase(ALP), uric acid(UA) and creatine kinase(CK). Reference intervals were established according to central 95% confidence intervals for reference population, stratified by age and sex. Results: In total, 2 259 children were enrolled. Finally, 1 648 children were eligible for this study, including 830 boys and 818 girls, at a mean age of 7.4 years. Age- and sex- specific reference intervals have been established for the parameters. Reference intervals of sex hormones increased gradually with age. Concentrations of ALT, cystatin C, ALP and CK were higher in children under 2 years old. Serum levels of sex hormones, creatinine, immunoglobin, CK, ALP and urea increased rapidly in adolescence, with significant sex difference. In addition, reference intervals were variable depending on assay methods. Concentrations of ALT detected by reagents with pyridoxal 5'-phosphate(PLP) were higher than those detected by reagents without PLP. Compared with enzymatic method, Jaffe assay always got higher results of serum creatinine, especially in children younger than 9 years old. Conclusion This study established age- and sex- specific reference intervals, for 15 clinical laboratory parameters based on defined healthy children.