Taste-masking effect of pharmaceutical formulation is important for the pharmacy worker to carry out study on taste-masking of pharmaceutical formulation. This study discussed the feasibility of electronic tongue in the evaluation of taste-masking effect. The berberine hydrochloride was used as model drug of bitterness. Sodium cycla-mate, 2,4-Dihydroxybenzoic acid and sodium cyclamate were used as bitterness inhibitors. Through detection of elec-tronic tongue, results from principal component analysis (PCA), and indexes such as distance of bitterness (D), dis-tance of bitterness reduction, inhibition rate (Ir), the determination was given on whether results from the bitterness inhibition of berberine hydrochloride and taste results from volunteers were the same. In addition, sodium cyclamate, which was the best bitterness inhibition, was made into different concentrations in order to optimize its using dosage. The data analysis results showed that in the berberine hydrochloride solution with the concentration of 0.005 mg/mL, the ranking order of the bitterness-masking efficiency was sodium cyclamate > 2,4-Dihydroxybenzoic acid > sodium acetate anhydrous. Along with the increasing concentration of sodium cyclamate, the taste-masking effect is better. However, after the concentration level of 0.2%, the change on taste-masking effect was relatively small. In the prac-tical work, the concentration of sodium cyclamate can be selected at the level of 0.2%. This experiment effect was the same as the human taste results. This study showed that the electronic tongue may be a useful tool in the evalua-tion of taste-masking efficiency to some extent.

This paper was aimed to study the quantitation method of bitterness intensity of bitter drug, and to ex-plore the mutual relations between the bitterness intensity and the concentration of bitter drugs solution. The mod-el drug of berberine hydrochloride, which was made into a series of solutions of different concentrations, was ap-plied. Twenty volunteers, who were screened, trained and qualified, tasted the different concentration of aqueous solution, with the purpose of detecting the rank bitterness intensity. After analyzing the features of the data and testing the logarithm model and Weibull curve model, as well as nonlinear fitting, we finally set up the appropri-ate relationship curve between the concentration and the bitterness intensity. There is a good curve positive corre-lation between the bitterness intensity and the concentration, which is consistent with the Weibull curve model (R2= 0.9973, RMSE = 0.0976, RMSECV = 0.1453). The fitting degree of the model established in this paper is high, which provides a reference for quantitation and forecast of the drug bitterness.

Objective:To conduct a Meta-analysis to estimate the national incidence rate of fall injuries among primary and middle school students in China in recent five years and to provide evidence for reducing fall injuries among primary and secondary school students.Methods:Publications between 2016 and 2021 were extracted from CNKI, VIP, Wanfang Databases, and PubMed. Observational studies consisting on the incidence rate of fall injuries were included. Stata 17.0 software was used for Meta-analysis. Subgroup analyses were undertaken by gender, type of school, urban/rural areas, and case definition. Sensitivity analysis and publication bias were performed.Results:Thirty papers were included for Meta-analysis, with a total sample size of 431 054. The combined incidence rate of fall injuries was 8.03% for injured persons and 9.61% for times of injuries. For injured persons, the incidence of fall injury was higher in boys (7.50%) than in girls (6.20%) and rural areas (8.12%) than in urban areas (3.94%). The incidence rate from studies using the injury definition of 1996 (9.42%) was higher than that of 2004 (7.56%), while there was no significant difference in rates between students from different types of schools. For times of injuries, the incidence of fall injury in boys (10.89%) was higher than that in girls (9.26%), in primary school students (10.06%) was higher than that in middle school students (6.53%), in rural areas (15.06%) was higher than that in urban areas (12.52%). The incidence rate from studies using the injury definition of 1996 (8.86%) was higher than that using the definition of 2004 (7.59%). The Meta-analysis results were slightly changed after the literature with the lowest score in literature quality evaluation, and monitoring data analysis were deleted through sensitivity analysis.Conclusion:There are differences in the incidence of fall injuries among Chinese primary and secondary school students of different genders and between urban/rural areas.

Terminally ill patients face multiple difficulties in home care.Home-based palliative care ad-hering to the concept of whole-person,whole-family,whole-team,and whole-course care is able to meet the needs of terminally ill patients and their families.In this paper,we reported the care history and home-based pal-liative care process of a patient with end-stage breast tumor and summarized the experience,aiming to provide reference for the future work of home-based palliative care.

PURPOSE: This study aimed to evaluate the accuracy of the ultrasonic jaw tracking system by comparing with the conventional electronic system in recording condylar movements. MATERIALS AND METHODS: Twenty-six subjects with normal occlusion participated in the study. The CADIAX® 4 and Jaw Motion Analyzer (JMA) systems were used to record condylar movement trajectories during mandibular border movements (protrusive/retrusive, lateral, and wide mouth opening), with each movement repeated three times. Both systems used facebows and sensors to locate the condylar axis points and capture movement trajectory data. Paired t-tests were used for normally distributed data, while the Wilcoxon rank-sum test was applied to non-normally distributed data. The level of significance was set at α = .05. RESULTS: The maximum condylar displacement in the sagittal plane during mandibular border movements and the sagittal condylar inclination (SCI) values on both the left and right sides showed no significant difference between the two systems (P > .05). The Bennett angle (BA) values on both the left and right sides measured by the JMA system were significantly higher than those measured by the CADIAX® 4 system (P < .05). The comfort levels of the JMA system were significantly higher than the CADIAX® 4 system (P < .05). CONCLUSION Through this study, it was found that the accuracy of the ultrasonic jaw tracking system was comparable with the conventional electronic system, except for the Bennett angle measurement. In terms of comfort and ease of use, the ultrasonic jaw tracking system is more favored.

PURPOSE: This study aimed to evaluate the accuracy of the ultrasonic jaw tracking system by comparing with the conventional electronic system in recording condylar movements. MATERIALS AND METHODS: Twenty-six subjects with normal occlusion participated in the study. The CADIAX® 4 and Jaw Motion Analyzer (JMA) systems were used to record condylar movement trajectories during mandibular border movements (protrusive/retrusive, lateral, and wide mouth opening), with each movement repeated three times. Both systems used facebows and sensors to locate the condylar axis points and capture movement trajectory data. Paired t-tests were used for normally distributed data, while the Wilcoxon rank-sum test was applied to non-normally distributed data. The level of significance was set at α = .05. RESULTS: The maximum condylar displacement in the sagittal plane during mandibular border movements and the sagittal condylar inclination (SCI) values on both the left and right sides showed no significant difference between the two systems (P > .05). The Bennett angle (BA) values on both the left and right sides measured by the JMA system were significantly higher than those measured by the CADIAX® 4 system (P < .05). The comfort levels of the JMA system were significantly higher than the CADIAX® 4 system (P < .05). CONCLUSION Through this study, it was found that the accuracy of the ultrasonic jaw tracking system was comparable with the conventional electronic system, except for the Bennett angle measurement. In terms of comfort and ease of use, the ultrasonic jaw tracking system is more favored.

PURPOSE: This study aimed to evaluate the accuracy of the ultrasonic jaw tracking system by comparing with the conventional electronic system in recording condylar movements. MATERIALS AND METHODS: Twenty-six subjects with normal occlusion participated in the study. The CADIAX® 4 and Jaw Motion Analyzer (JMA) systems were used to record condylar movement trajectories during mandibular border movements (protrusive/retrusive, lateral, and wide mouth opening), with each movement repeated three times. Both systems used facebows and sensors to locate the condylar axis points and capture movement trajectory data. Paired t-tests were used for normally distributed data, while the Wilcoxon rank-sum test was applied to non-normally distributed data. The level of significance was set at α = .05. RESULTS: The maximum condylar displacement in the sagittal plane during mandibular border movements and the sagittal condylar inclination (SCI) values on both the left and right sides showed no significant difference between the two systems (P > .05). The Bennett angle (BA) values on both the left and right sides measured by the JMA system were significantly higher than those measured by the CADIAX® 4 system (P < .05). The comfort levels of the JMA system were significantly higher than the CADIAX® 4 system (P < .05). CONCLUSION Through this study, it was found that the accuracy of the ultrasonic jaw tracking system was comparable with the conventional electronic system, except for the Bennett angle measurement. In terms of comfort and ease of use, the ultrasonic jaw tracking system is more favored.

PURPOSE: This study aimed to evaluate the accuracy of the ultrasonic jaw tracking system by comparing with the conventional electronic system in recording condylar movements. MATERIALS AND METHODS: Twenty-six subjects with normal occlusion participated in the study. The CADIAX® 4 and Jaw Motion Analyzer (JMA) systems were used to record condylar movement trajectories during mandibular border movements (protrusive/retrusive, lateral, and wide mouth opening), with each movement repeated three times. Both systems used facebows and sensors to locate the condylar axis points and capture movement trajectory data. Paired t-tests were used for normally distributed data, while the Wilcoxon rank-sum test was applied to non-normally distributed data. The level of significance was set at α = .05. RESULTS: The maximum condylar displacement in the sagittal plane during mandibular border movements and the sagittal condylar inclination (SCI) values on both the left and right sides showed no significant difference between the two systems (P > .05). The Bennett angle (BA) values on both the left and right sides measured by the JMA system were significantly higher than those measured by the CADIAX® 4 system (P < .05). The comfort levels of the JMA system were significantly higher than the CADIAX® 4 system (P < .05). CONCLUSION Through this study, it was found that the accuracy of the ultrasonic jaw tracking system was comparable with the conventional electronic system, except for the Bennett angle measurement. In terms of comfort and ease of use, the ultrasonic jaw tracking system is more favored.

PURPOSE: This study aimed to evaluate the accuracy of the ultrasonic jaw tracking system by comparing with the conventional electronic system in recording condylar movements. MATERIALS AND METHODS: Twenty-six subjects with normal occlusion participated in the study. The CADIAX® 4 and Jaw Motion Analyzer (JMA) systems were used to record condylar movement trajectories during mandibular border movements (protrusive/retrusive, lateral, and wide mouth opening), with each movement repeated three times. Both systems used facebows and sensors to locate the condylar axis points and capture movement trajectory data. Paired t-tests were used for normally distributed data, while the Wilcoxon rank-sum test was applied to non-normally distributed data. The level of significance was set at α = .05. RESULTS: The maximum condylar displacement in the sagittal plane during mandibular border movements and the sagittal condylar inclination (SCI) values on both the left and right sides showed no significant difference between the two systems (P > .05). The Bennett angle (BA) values on both the left and right sides measured by the JMA system were significantly higher than those measured by the CADIAX® 4 system (P < .05). The comfort levels of the JMA system were significantly higher than the CADIAX® 4 system (P < .05). CONCLUSION Through this study, it was found that the accuracy of the ultrasonic jaw tracking system was comparable with the conventional electronic system, except for the Bennett angle measurement. In terms of comfort and ease of use, the ultrasonic jaw tracking system is more favored.

OBJECTIVETo study the radiographycal changes and prognosis of welders' pneumoconiosis patients diagnosed within the last few years.

METHODSOccupational hygienics data (including years on welding work, welding materials exposed to and work environment), symptoms, lung function test results and follow-up data of 136 welders' pneumoconiosis patients were collected retrospectively. The follow-up lasted up till June 30, 2014, with follow-up interval being one year. Chest radiographs were read/reviewed together by 3 senior experts experienced in pneumoconiosis diagnosing and shape and size of small opacity, overall profusion, affected lung zones and pneumoconiosis stages were all logged.

RESULTSOf all 136 pneumoconiosis cases, five were of stage II and 131 were stage I, and they had been engaged in welding work for 9.2±6.34 years. All patients were present with slight symptoms including coughing, chest distress and dyspnea, while their lung function remained normal. Small round opacities were found on chest radiographs of 88.9% of the 136 cases. Years of follow-up on 131 cases of stage I Welder's pneumoconiosis showed that irregular small opacities remained fundamentally unchanged, while small round opacities tended to gradually lessen instead of coalescence. Two years after primary diagnosing, the total affected lung zones of follow-up objects were noticed to start lessening, and reduced by 0.02 per patient among the 48 follow-up subjects. Of the 48 cases followed up up to six years after primary diagnosing, the affected lung zone number was reduced by 0.54 per patient while 4 cases (8%) went down to below stage I. As of the 36 patients followed up 10 years after after primary diagnosis, the number of affected lung areas decreased by 1.14, and 22% (8 cases) appeared less than stage I on chest radiograph.

CONCLUSIONIt seemed that the so-called welders' pneumoconiosis featuring small round opacities tended to get improved over time, which suggested the diagnosis of siderosis.

Cohort Studies ; Humans ; Lung ; Occupational Exposure ; adverse effects ; Pneumoconiosis ; diagnostic imaging ; pathology ; Radiography, Thoracic ; Retrospective Studies ; Siderosis ; diagnostic imaging ; pathology ; Thoracic Cavity ; Welding