Objective To assess the effect of platycodin D(PD)for alleviating pulmonary fibrosis in mice and explore the underlying mechanism.Methods C57BL/6J mouse models of pulmonary fibrosis induced by bleomycin injection into the airway were treated with daily intragastric administration of 10 mg/kg PD for 28 days.The changes of pulmonary fibrosis and the expression and distribution of transient receptor potential cation channel subfamily C member 6(TRPC6)were evaluated with immunohistochemistry,HE staining and Sirius Red staining.Western blotting was used to detect α-SMA expression in the lung tissues of the mice.Primary cultures of mouse lung fibroblasts were pretreated with PD(2.5,5.0,and 10 μmol/L)or larixyl acetate(LA;10 μmol/L)before exposure to 10 ng/mL transforming growth factor-β1(TGF-β1),and the changes in cell survival rate,expressions of collagen I,α-SMA and TRPC6,reactive oxygen species(ROS)production,mitochondrial membrane potential,and cell proliferation capacity were assessed.Network pharmacology analysis was performed to explore the mechanism by which PD alleviated pulmonary fibrosis.Results PD treatment significantly alleviated pulmonary fibrosis and reduced α-SMA expression in BLM-induced mouse models(P<0.05).In TGF-β1-induced primary mouse lung fibroblasts,PD effectively inhibited the cell proliferation,reduced ROS production(P<0.0001),rescued the reduction of mitochondrial membrane potential(P<0.001),and inhibited the expressions of α-SMA and collagenⅠ(P<0.05).Network pharmacology analysis suggested that TRPC6 mediated the effect of PD for alleviating pulmonary fibrosis.Immunohistochemistry showed that PD significantly reduced TRPC6 expression in the lung tissues of BLM-induced mice.In primary mouse lung fibroblasts,PD significantly inhibited TGF-β1-induced TRPC6 expression(P<0.05),and LA treatment obviously lowered the expression levels of TRPC6,α-SMA and collagenⅠ(P<0.05).Conclusion PD alleviated pulmonary fibrosis in mice possibly by down-regulating TRPC6 and reducing ROS production.

Objective To assess the effect of platycodin D(PD)for alleviating pulmonary fibrosis in mice and explore the underlying mechanism.Methods C57BL/6J mouse models of pulmonary fibrosis induced by bleomycin injection into the airway were treated with daily intragastric administration of 10 mg/kg PD for 28 days.The changes of pulmonary fibrosis and the expression and distribution of transient receptor potential cation channel subfamily C member 6(TRPC6)were evaluated with immunohistochemistry,HE staining and Sirius Red staining.Western blotting was used to detect α-SMA expression in the lung tissues of the mice.Primary cultures of mouse lung fibroblasts were pretreated with PD(2.5,5.0,and 10 μmol/L)or larixyl acetate(LA;10 μmol/L)before exposure to 10 ng/mL transforming growth factor-β1(TGF-β1),and the changes in cell survival rate,expressions of collagen I,α-SMA and TRPC6,reactive oxygen species(ROS)production,mitochondrial membrane potential,and cell proliferation capacity were assessed.Network pharmacology analysis was performed to explore the mechanism by which PD alleviated pulmonary fibrosis.Results PD treatment significantly alleviated pulmonary fibrosis and reduced α-SMA expression in BLM-induced mouse models(P<0.05).In TGF-β1-induced primary mouse lung fibroblasts,PD effectively inhibited the cell proliferation,reduced ROS production(P<0.0001),rescued the reduction of mitochondrial membrane potential(P<0.001),and inhibited the expressions of α-SMA and collagenⅠ(P<0.05).Network pharmacology analysis suggested that TRPC6 mediated the effect of PD for alleviating pulmonary fibrosis.Immunohistochemistry showed that PD significantly reduced TRPC6 expression in the lung tissues of BLM-induced mice.In primary mouse lung fibroblasts,PD significantly inhibited TGF-β1-induced TRPC6 expression(P<0.05),and LA treatment obviously lowered the expression levels of TRPC6,α-SMA and collagenⅠ(P<0.05).Conclusion PD alleviated pulmonary fibrosis in mice possibly by down-regulating TRPC6 and reducing ROS production.

Objective:To verify the clinical safety and efficacy of new intelligent ventilation mode adaptive minute ventilation (AMV)+IntelliCycle ventilation in patients with mild-to-moderate acute respiratory distress syndrome (ARDS).Methods:The patients with mild-to-moderate ARDS, admitted to intensive care unit (ICU) of the First Affiliated Hospital of Jinzhou Medical University from February 2018 to February 2019, were enrolled in the study. The patients were divided into synchronous intermittent mandatory ventilation+pressure support ventilation (SIMV+PSV) group and AMV+IntelliCycle group according to the random number table method. All patients were given mechanical ventilation, anti-infection, analgesia and sedation, nutritional support and symptomatic treatment of primary disease after admission. SV800 ventilator was used for mechanical ventilation. In the AMV+IntelliCycle group, after setting the minute ventilation volume (VE), inhaled oxygen concentration (FiO 2) and positive end expiratory pressure (PEEP), the ventilator was turned on the full-automatic mode, and the preset value of VE percentage was 120%. In the SIMV+PSV group, the ventilator parameters were set as follows: the ventilation frequency was 12-20 times/min, the inspiratory expiratory ratio was 1∶1-2, the peak inspiratory pressure (PIP) limit level was 35-45 cmH 2O (1 cmH 2O = 0.098 kPa), and the setting of FiO 2 and PEEP was as the same as that of AMV+IntelliCycle group, the triggering flow was set to 2 L/min. All of the clinical parameters between the two groups were compared. The main outcomes were duration of mechanical ventilation, ventilator alarm times, manual operation times, and the mechanical power; the secondary outcomes were respiratory rate (RR), VE, tidal volume (VT), PIP, mouth occlusion pressure (P0.1), static compliance (Cst), work of breathing (WOB), and time constant at 0, 6, 12, 24, 48, 72, and 120 hours; and the blood gas analysis parameters of patients before and after ventilation were recorded. Results:A total of 92 patients with mild-to-moderate ARDS were admitted during the study period, excluding those who quit the study due to death, abandonment of treatment, accidental extubation of tracheal intubation and so on. Eighty patients were finally enrolled in the analysis, with 40 patients in SIMV+PSV group and AMV+IntelliCycle group respectively. ① Results of main outcomes: compared with the SIMV+PSV mode, AMV+IntelliCycle ventilation mode could shorten the duration of mechanical ventilation (hours: 106.35±55.03 vs. 136.50±73.78), reduce ventilator alarm times (times: 10.35±5.87 vs. 13.93±6.87) and the manual operations times (times: 4.25±2.01 vs. 6.83±3.75), and decrease the mechanical power (J/min: 12.88±4.67 vs. 16.35±5.04, all P < 0.05). But the arterial partial pressure of carbon dioxide (PaCO 2) of AMV+IntelliCycle group was significantly higher than that of SIMV+PSV group [mmHg (1 mmHg = 0.133 kPa): 41.58±6.81 vs. 38.45±5.77, P < 0.05]. ② Results of secondary outcomes: the RR of both groups was improved significantly with the prolongation of ventilation time which showed a time effect ( F = 4.131, P = 0.005). Moreover, compared with SIMV+PSV mode, AMV+IntelliCycle mode could maintain a better level of RR, with intervention effect ( F = 5.008, P = 0.031), but no interaction effect was found ( F = 2.489, P = 0.055). There was no significant difference in VE, PIP, P0.1 or Cst between the two groups, without intervention effect ( F values were 3.343, 2.047, 0.496, 1.456, respectively, all P > 0.05), but they were significantly improved with the prolongation of ventilation time in both groups, with time effect ( F values were 2.923, 12.870, 23.120, 7.851, respectively, all P < 0.05), but no interaction effect was found ( F values were 1.571, 1.291, 0.300, 0.354, respectively, all P > 0.05). The VT, WOB or time constant in both groups showed no significant changes with the prolongation of ventilation time, and no significant difference was found between the two groups, there was neither time effect ( F values were 0.613, 1.049, 2.087, respectively, all P > 0.05) nor intervention effect ( F values were 1.459, 0.514, 0.923, respectively, all P > 0.05). Conclusion:AMV+IntelliCycle ventilation mode can shorten the ventilation time of patients with mild-to-moderate ARDS, reduce mechanical power, and reduce the workload of medical care, but PaCO 2 in the patients with AMV+IntelliCycle mode is higher than that in the patients with SIMV+PSV mode.

Objective:To explore the therapeutic effect of low-intensity extracorporeal shock wave (Li-ESW) in model rats with chronic prostatitis and its optimal parameters.Methods:From April to August 2019, 90 healthy male SD rats aged 8 weeks were randomly divided into control group (group C, n=15), model group (group M, n=15) and shock wave treatment group (group T, n=60), which were treated with Li-ESW after being modeled successfully. The rats in group T were supine and treated with focused Li-ESW, and the probe was placed above the anatomical position of the prostate. Treatment scheme was 3 Hz of frequency, 500 pulses, and once a week for 4 weeks. Group T was divided into group T1(0.09 mJ/mm 2), T2(0.20 mJ/mm 2), T3(0.30 mJ/mm 2) and T4(0.40 mJ/mm 2) according to energy flux density, with 15 rats in each group. Before the establishment of the model, the rats in each group were tested with von Frey fiber of 2 g, 4 g and 6 g at the scrotum respectively, and the positive reaction was recorded. There was no significant difference between the three groups ( P>0.05). After one week, the rat model with CP was established by injecting 3% carrageenan into the bilateral lobes of the prostate under anesthesia. And one week after the modeling was completed, the rats in each group underwent von Frey test again to measure pain and evaluate the modeling effects. Group T was then treated once a week for a 4-week period. During the treatment, von Frey test was performed before each treatment to evaluate the treatment effect of the previous week. After the von Frey test for one, two and four weeks of treatment, 5 rats were sacrificed in each group, and the bilateral lobes of the prostate were dissected under aseptic conditions for paraffin inclusion and HE staining. Result:The positive reaction in group M and each group T was significantly more than those in group C ( P<0.001) one week after the modeling was completed, and there was no significant difference between group M and group T. The number of positive reactions in group T2 was lower than that in group M at each time point after treatment ( P<0.05), and it is also less in group T1, T3 and T4 were than that in group M after 3 weeks, 3 and 4 weeks and 2 weeks respectively( P<0.05). In group T2, the number of positive reactions began to decrease after 1 week of treatment, and reached the lowest after 4 weeks, with significant difference in pain measurement results at different time points ( P<0.05). The results of pathological examination showed that there were more inflammatory cells in prostatic stroma and disordered arrangement of epithelial cells in group M than that in group C. The pathological scores of group M, T1, T2, T3 and T4 were 8, 7, 4, 6, 9 after 1 week treatment, 8, 5, 3, 4, 7 points after 2 weeks treatment, and 7, 3, 2, 4, 7 points after 4 weeks treatment, respectively. Conclusions:Low-intensity extracorporeal shock wave treatment had a significant effect on the improvement of symptoms in model rats with chronic prostatitis. Under the scheme of frequency 3 Hz, 500 pulses, once a week for 4 weeks, the optimal parameters is 0.20 mJ/mm 2.

Objective:To construct the nursing quality evaluation index system for Laryngeal Cancer Rehabilitation Nursing Clinic.Methods:The nursing quality evaluation index system for Laryngeal Cancer Rehabilitation Nursing Clinic was constructed through literature analysis and survey research. From October to December 2022, 17 experts were selected for two rounds of expert consultation, and indicators at all levels were screened, modified, and improved to establish the nursing quality evaluation index system for Laryngeal Cancer Rehabilitation Nursing Clinic.Results:In the two rounds of expert consultation, the effective response rate of the questionnaire was 100.0% (17/17), and the expert authority coefficients were 0.912 and 0.924, respectively. The Kendall harmony coefficients of the two rounds of consultation were 0.199 and 0.221, respectively ( P<0.05). The final constructed nursing quality evaluation index system for Laryngeal Cancer Rehabilitation Nursing Clinic included 3 primary indicators, 15 secondary indicators, and 90 tertiary indicators. Conclusions:The nursing quality evaluation index system for Laryngeal Cancer Rehabilitation Nursing Clinic is scientific and reliable, providing reference for nursing quality evaluation and standardized management of Laryngeal Cancer Rehabilitation Nursing Clinic.

ObjectiveTo improve the accuracy of discrete element method in simulating the processing of traditional Chinese medicine（TCM） powder system under low shear conditions. MethodsIn this study， extract powders of Tongsaimai tablets and Qige granules were used as the research objects， the angle of repose（AOR） and effective angle of internal friction of the two materials were determined by AOR test method and shear cell test method. Based on the Hertz-Mindlin with JKR V2 contact model and particle scaling theory， taking the particle-particle restitution coefficient（A）， particle-particle static friction coefficient（B）， particle-particle rolling friction coefficient（C）， particle-steel restitution coefficient（D）， particle-steel static friction coefficient（E）， particle-steel rolling friction coefficient（F） and Johnson-Kendall-Roberts（JKR） surface energy（G） as test factors， the simulated contact parameters of Tongsaimai tablets extract powder were first calibrated with a single reference value using AOR as the reference value， and then the simulated contact parameters of Tongsaimai tablets extract powder as well as Qige granules extract powder were co-calibrated with AOR and effective angle of internal friction as the joint reference value， respectively. Then， Plackett-Burman design was used to screen the critical contact parameters that have a significant effect on the simulated reference value， and the steepest ascent design was used to determine the optimal range of the critical contact parameters， finally， the regression model between the critical contact parameters and the simulated reference values was established through the design of the response surface test， and the critical contact parameters were calibrated based on the regression model and the desirability function approach. ResultsThe optimal combination of discrete elemental contact parameters A-G for Tongsaimai tablets extract powder under a single reference value was 0.100， 0.718， 0.616， 0.100， 0.400， 0.250 and 0.075 J·m^-2， which was validated to have relative errors of 0.10% and -8.64% for the simulated AOR and the simulated effective angle of internal friction， respectively. And the optimal combination of discrete elemental contact parameters A-G for Tongsaimai tablets extract powder at the joint reference values was 0.100， 0.682， 0.598， 0.100， 0.521， 0.294 and 0.075 J·m^-2， which was verified to have relative errors of 0.10% and -0.18% for the simulated AOR and the simulated effective angle of internal friction， respectively. The optimal combination of discrete elemental contact parameters A-G for Qige granules extract powder at the joint reference values was 0.150， 0.370， 0.330， 0.150， 0.500， 0.500 and 0.100 J·m^-2， which was verified to have relative errors of 2.70% and -1.30% for the simulated AOR and the simulated effective angle of internal friction， respectively. Compared with the single reference value method， the joint calibration method not only increased the number of the critical contact parameters for characterizing particle-device interactions， but also was more accurate and reliable. ConclusionCompared with the results of single reference value calibration， the results obtained by the method of joint calibration of discrete element simulation contact parameters with AOR and effective angle of internal friction as the reference values are more accurate， which can provide more accurate and reliable simulation physical property data for the simulation experiments of TCM extract powder under low shear process conditions.