Objective To design and implement an automatic analysis and evaluation system for the image parameters of medical MRI quality testing.Methods The system was developed and debugged by the study on MRI image quality parameters,the image denoising,integration,extraction and etc by MATLAB processing platform as well as the comparison and comparative calculation of the obtained data.Results The system replaced manual operation by auto processing and parameters analysis of MRI quality inspection image.Conclusion The system enhances the efficiency and avoids artificial error,and has a promising prospect in the future.

Objective To discuss the technical specifications of current high-frequency electrotome detection,to avoid the hidden danger of high-frequency electrotome power detectors,and to measure the leakage current of different kinds of highfrequency electrotome accurately.Methods The power and leakage current of the high frequency electrotome were measured by FLUCK QA-ES Ⅱ high frequency electrotome analyzer.The safety of the two methods was compared before and after the improvement of the power measurement.Four parameters of leakage current were repeatedly measured with the ways of high frequency earthing and high frequency isolation respectively.The maximum measurement of leakage current was recorded.Results The improved connection method was safe in the power measurement.For the high-frequency electrotome in the model of high frequency earthing,the values of leakage current were restrained within the range of error with two ways of monopolar loading operation electrode and neutral electrode.For the high-frequency electrotome in the model of high frequency isolation,the values of leakage current were limited within the range of error withtwo ways of monopolar empty operation electrode and neutral electrode.Conclusion The improved high-frequency electrotome power detection method is safe for detectors.The data obtained from the leakage current detection method using the national standard correction method reflect the actual state of the high-frequency electrotome,when the electrotome with earth as the reference is used to detect the leakage current with loading or the insulated electrotome is applied to measuring the leakage current with no loading.

Objective To investigate the effect of silk fibroin (SF) on degradation and biocompatibility of poly (L-lactic acid-co-e-caprolactone) (P[LLA-CL]) in vivo. Methods The scaffolds of P(LLA-CL) (w/w=1:1) blended with 25% of SF (SF/P[LLA-CL]) and P(LLA-CL) were prepared by electrospinning. Both kinds of scaffolds were subcutaneously implanted in 45 6-month-old rats for up to 6 months to evaluate their degradation and biocompatibility characteristics. Results Pathological sections showed P(LLA-CL) scaffold become swollen and began to separate into different layers after 3 months, and then become broken after 6 months; while SF/P (LLA-CL) scaffold largely maintained its structure after 6 months. Immunohistochemical staining showed a large number of macrophages on the surface and in P(LLA-CL) scaffolds 1 month after implantation, and they could still be found 3 months after implantation, accompanied by foreign body giant cells; while no obvious macrophages or foreign body giant cells were found in SF/P(LLA-CL) scaffolds at different time points. Examination of inflammatory gene expression showed that TNF-α and IL-10 expression in P(LLA-CL) scaffolds was significantly higher than that in SF/P(LLA-CL) scaffolds 1 week after implantation (P<0. 05), the same was also true for TNF-α, IL-1β and IL-10 expression 1 month after implantation (P<0. 05), for TNF-α and IL-10 expression 2 months after implantation (P<0. 05), for TGF-β expression 3 months after implantation (P<0. 05%, and for IL-1β and TGF-β expression 6 months after implantation (P<0. 05%). Conclusion SF incorporation can delay degradation, reduce inflammation, and improve the biocompatibility of P(LLA-CL) scaffolds, which may provide reference for scaffold design in tissue engineering.

OBJECTIVETo investigate the effects of polysaccharide 2-1 from Gastrodia elata (PGE2-1) on blood coagulation and thrombosis.

METHODClotting time (CT) and bleeding time (BT) of mice were measured by glass method and tail-cutting method. Bleeding capacity (A540) was measured by cutting tail in 5 min. Plama recalcificatic time (RT) were measured in mice. Platelet aggregation was caused by adenosine diphosphate (ADP). Activated partial thromboplastin time (APTT), prothrombin time (PT), and thrombin time (TT) were measured by reagent boxes. During thrombosis in vitro, their lengths, wet and dry weights were measured by instrument; wet weights of arteriovenous experimental thrombosis were measured and the impressive rates were analyzed.

RESULTCT and BT of groups PGE2-1 (60, 120 mg x kg(-1)) were remarkably prolonged, and bleeding capacity (A540) were significantly increased (P < 0.05 or P < 0.01). RT of groups PGE2-1 (30, 60, 120 mg x kg(-1)) were remarkably prolonged, and platelet aggregation (PAG) were inhibited (P < 0.05 or P < 0.01). Human serous TT and APTT of groups PGE2-1 (10, 20, 40 mg x mL(-1)) were remarkably prolonged (P < 0.05 or P < 0.01), but the difference of effect on PT had no statistic significance. PGE2-1 (30, 60, 120 mg x kg(-1)) could make the mice obviously eliminate thrombus symptom and reduce the time of restoring independent activity (P < 0.05 or P < 0.01); thrombosis in vitro: Lengths, wet and dry weights of groups PGE2-1 (30, 60, 120 mg x kg(-1)) were significantly decreased (P < 0.05 or P < 0.01); wet weights of arteriovenous experimental thrombosis were dramatically decreased (P < 0.01), and impressive rates were respectively 32.5%, 49.0% and 61.5%.

CONCLUSIONPGE2-1 has remarkable effects of anticoagulation and antithrombosis, so it may be the main component of the isolation from G. elata in the field of antithrombosis.

Animals ; Anticoagulants ; isolation & purification ; pharmacology ; Blood Coagulation Tests ; Dose-Response Relationship, Drug ; Female ; Fibrinolytic Agents ; isolation & purification ; pharmacology ; Gastrodia ; chemistry ; Glycoproteins ; isolation & purification ; pharmacology ; Humans ; Male ; Mice ; Partial Thromboplastin Time ; Phytotherapy ; Plants, Medicinal ; chemistry ; Platelet Aggregation ; drug effects ; Prothrombin Time ; Random Allocation ; Rats ; Rats, Wistar ; Thrombin Time ; Thrombosis ; pathology ; prevention & control

OBJECTIVETo explore surface roughness of bone cement and surround tissue on histological characteristic of induced membranes.

METHODSBone cements with smooth and rough surface were implanted in radius bone defect, intramuscular and subcutaneous sites of rabbits, and formed induced membranes. Membranes were obtained and stained (HE) 6 weeks later. Images of membrane tissue were obtained and analyzed with an automated image analysis system. Five histological parameters of membranes were measured with thickness,area,cell density,ECM density and microvessel density. Double factor variance analysis was used to evaluate the effect of the two factors on histological characteristics of induced membranes.

RESULTSMembranes can be induced by each kind of bone cement and at all the three tissue sites. In histological parameters of thickness,area and micro vessel,there were significant differences among the membranes induced at different tissue sites (P = 0.000, P = 0.000, P = 0.000); whereas, there were no significant differences in histological parameters of cell density and ECM density (P = 0.734, P = 0.638). In all five histological parameters of membranes, there were no significant differences between the membranes induced by bone cements with different surface roughness (P = 0.506, P = 0.185, P = 0.883, P = 0.093, P = 0.918).

CONCLUSIONSurround tissue rather than surface roughness of bone cements can affect the histological characteristics of induced membranes. The fibrocystic number, vascularity, mechanical tension and micro motion of the surround tissue may be closely correlated with the histological characteristics of induced membranes.

Animals ; Bone Cements ; Female ; Membranes ; cytology ; Rabbits ; Radius ; cytology ; Surface Properties ; Tissue Engineering ; methods ; Tissue Scaffolds

Objective To establish a rapid assay with high sensitivity and specificity based on the sequences for group specific gene (GS) and pathogenicity island pag A gene.Methods The PCR primers and probes were designed after the whole sequence was systemically analyzed with bio-informafion tools and blasted with Genebank database.The amplicons were inserted into plasmids so that they could be used as the standard templates to evaluate the sensitivity of the diagnostic system.This assay was based on TaqMan probes and portable Smartcycle PCR machine.Results The detection level was approximately 100 copies per reaction.There was no cross-reaction with other species of Bacillus.This assay could be completed in one hour in laboratory.Conclusion The duplex TaqMan PCR assay could be used to detect Bacillus anthracis rapidly with high sensitivity and specificity.

OBJECTIVETo identify and analyze the differential expression of ubiquitin C-terminal hydrolase L-1 (UCHL1) in the testis of rat offspring after maternal exposure to di-n-butyl phthalate (DBP).

METHODSForty pregnant rats were randomly divided into two groups and given DBP by gastric intubation at the dose of 800 mg/(kg x d) or none from the 14-18th day of pregnancy. Testes were harvested from the fetal and neonatal rats of the normal and exposed groups respectively at GD19 and PND22. The expression of UCHL1 was detected and analyzed by Western blot and immunohistochemistry.

RESULTSThe UCHL1 expression was 50% lower in the DBP-exposed group than in the normal controls on GD19 (P < 0.01), but showed no significant difference between the two groups on PND22 (P > 0.05). UCHL1 was mainly located in the cytoplasm and nuclei of spermatogonia, primary spermatocytes and sub-primary spermatocytes in the developmental phase of the testis.

CONCLUSIONExposure in utero to DBP affects the UCHL1 expression in testicular spermatogenic cells, disturbs the balance of the ubiquitin-proteasome system and consequently causes maldevelopment of the testis with thinner seminiferous tubules and reduced count of spermatogenic cells.

Animals ; Animals, Newborn ; Dibutyl Phthalate ; toxicity ; Female ; Immunohistochemistry ; Male ; Maternal Exposure ; Pregnancy ; Random Allocation ; Rats ; Rats, Sprague-Dawley ; Testis ; drug effects ; embryology ; metabolism ; Ubiquitin Thiolesterase ; biosynthesis

It has been found that the hypofunction status of hypothalamus-pituitary-adrenal (HPA) axis exists in patients with Shen-yang deficiency syndrome of TCM, also presents in most asthma patients. Seasonal attack of asthma can be prevented with Shen-tonifying drugs by improving adrenocortical function. Since patients subject to long-term glucocorticoids display hypofunction condition of HPA axis, Shen-tonifying drugs should be helpful to gluocorticoid withdrawal for getting higher success rate. Basic researches also indicated that the activating of adrenocortical stem cells and promoting regeneration of adrenal cortex is one of the mechanisms underlying improvement of adrenocortical function. Series of research showed that hypofunction of adrenocortex is the general pathological change in some diseases, so, Shen-tonifying drugs act a part in unitarily modulating the adrenocortical function, to get the therapeutic effect of both regulating the whole and improving the local.
Adolescent ; Adult ; Asthma ; physiopathology ; therapy ; Child ; Female ; Humans ; Hypothalamo-Hypophyseal System ; physiology ; Male ; Medicine, Chinese Traditional ; methods ; Middle Aged ; Nephrotic Syndrome ; physiopathology ; therapy ; Pituitary-Adrenal System ; physiology ; Yang Deficiency ; physiopathology ; Young Adult

OBJECTIVETo study the effect of methylene blue on the growth and acid production of Streptococcus mutans, and the effect of methylene blue on acid production metabolism in plaque glycolysis model (i-PGM) in vitro, and investigate the practicability of methylene blue as a new kind of dental caries prevention agent.

METHODSNephelometer method was used to measure OD value of Streptococcus mutans culture fluid in the different incubation conditions. The kinds and quantities of acid produced by Streptococcus mutans in the different incubation conditions were measured with gas chromatography. pH values of glycolysis buffer media of i-PGM in the different treatment conditions were measured by ORION electrode.

RESULTS(1) The OD value of Streptococcus mutans treated by methylene blue was lower than that by normal saline, and there was significant statistical difference between them. (2) The kinds of acid in three different culture fluid were same, but the total quantities of acid were significantly different among three different culture fluid, in which the total quantities of acid of culture fluids treated by glucose was the greatest, and treated by methylene blue was the lest. (3) The pH value of i-PGM treated by methylene blue was significantly different compared with negative control group, but was not significantly different compared with positive control group.

CONCLUSIONMethylene blue can inhibit the growth and acid production metabolism of Streptococcus matans and acid production metabolism of i-PGM.

Dental Caries ; Dental Plaque ; Glycolysis ; Methylene Blue ; Streptococcus mutans

OBJECTIVETo investigate the effect of pH value and fluoride ions on the corrosion resistance of pure Ti and Ni-Cr-Ti alloy in the artificial saliva.

METHODSElectrochemical technique was used to measure the electric potential of corrosion (Ecorr), current density of corrosion (Icorr) and polarization resistance (Rp) of pure titanium and Ti-Ni-Cr alloy in the artificial saliva with different pH value and fluoride concentrations. After electrochemical analysis, microstructure and phase diffraction were examined by FSEM.

RESULTSWith the lower pH value, the Ecorr and Icorr of pure titanium and Ti-Ni-Cr alloy increased, the Rp decreased, there was a significant difference (P<0.05). The Ecorr and Icorr increased markedly, the Rp significantly reduced in the artificial saliva containing 0.2% NaF (P<0.01). FSEM showed that pure titanium and Ti-Ni-Cr alloy surface corrosion, pure titanium in the artificial saliva containing 0.2% NaF was most serious.

CONCLUSIONLower pH value decreases the corrosion resistance of pure titanium and Ti-Ni-Cr alloy and the artificial saliva containing fluoride ions decreases the corrosion resistance of pure titanium.

Chromium Alloys ; chemistry ; Corrosion ; Dental Alloys ; chemistry ; Electrochemistry ; Fluorides ; chemistry ; Hydrogen-Ion Concentration ; Materials Testing ; Metal Ceramic Alloys ; chemistry ; Nickel ; chemistry ; Saliva, Artificial ; chemistry ; Surface Properties ; Titanium ; chemistry