Objective:To investigate the effect of tissue engineered bladder patch constructed by double-layer silk scaffold and adipose-derived stem cells (ADSCs) in the repair and reconstruction of bladder.Methods:This study was conducted from May 2020 to March 2021. The silk fibroin (SF) aqueous solution was obtained from silkworm cocoons, and a double-layer silk scaffold composed of silk fibroin film and silk fibroin sponge was further prepared. The rat ADSCs were isolated, cultured, and the ADSCs surface markers (CD29, CD90, CD45, CD106) were identified by flow cytometry. The ADSCs were planted on a double-layer silk scaffold to construct a tissue-engineered bladder patch. Thirty-six male SD rats were randomly divided into three groups: tissue engineered bladder patch group (SF-ADSCs group, n=15), double-layer silk scaffold group (SF group, n=15), control group ( n=6). The tissue engineered bladder patch (SF-ADSCs group) and double-layer silk scaffold (SF group) were wrapped on the omentum to promote vascularization. The vascularization was evaluated by HE and immunofluorescence staining. The wrapped tissue engineered bladder patch and double-layer silk scaffold were used to repair the defective bladder. In the control group (six rats), the incision was closed immediately after the bladder tissue fully exposed. At 4 weeks and 12 weeks after operation, the general morphology of bladder tissue and cystography were performed to evaluate the recovery of bladder morphology. After the graft was harvested, HE and Masson's trichrome staining and immunofluorescence staining were used to observe the regeneration of bladder wall tissue. Urodynamics was used to assess the recovery of bladder function at 12 weeks after operation. Results:The flow cytometry results confirmed that the isolated cells positively expressed CD29 and CD90, and there was no significant expression of CD45 and CD106. Gross observation and scanning electron microscope confirmed that the preparation of double-layer silk scaffold not only had a pore structure that was conducive to cell planting, but also had good toughness and was facilitated to surgical suture. The number (43.50±2.66) and area (0.73±0.03)% of vascular-like structures in the SF-ADSCs group after the omentum encapsulation was significantly higher than that in the SF group [(24.50±3.51), (0.55±0.05)%], and the difference was statistically significant ( P<0.05). At 4 weeks after bladder repair, the histological staining of the grafts in the SF-ADSCs and SF groups showed a large number of degraded fragments of double-layer silk scaffold. At 12 weeks, the morphology of the graft in the SF-ADSCs group showed uniform bladder morphology, which was similar to that of normal bladder tissue. Immunofluorescence staining showed that the continuous urothelial layer, abundant smooth muscle tissue, vascular structure and regenerated neurons could be observed in the SF-ADSCs group. Urodynamic test showed that the bladder maximum volume (0.74±0.03)ml and compliance (16.68±0.44)μl/cm H 2O in the SF-ADSCs group, which were better than that in the SF group [(0.47±0.05)ml, (14.89±0.37)μl/cm H 2O], but lower than that in the control group [(1.12±0.08)ml, (19.34±0.45)μl/cm H 2O], and the difference was statistically significant ( P<0.05). Conclusions:The tissue engineered bladder patch constructed with double-layer silk scaffolds and ADSCs could promote the morphological repair of bladder tissue, the regeneration of bladder wall structure and the recovery of bladder physiological function.

Objective:To prepare the whole bladder acellular matrix (BAM) using the self-designed perfusion decellularization system, and evaluate the feasibility of constructing the tissue engineering bladder with the adipose-derived stem cells (ADSCs).Methods:This study was conducted from October 2020 to April 2021. The self-designed perfusion decellularization system was used, and four different decellularization protocols (group A, group B, group C and group D) were formulated, according to the flow direction of the perfusate and the action time of different decellularization solutions. Among them, the urethral orifice of the bladder tissue was used as the outflow tract of the perfusion fluid in groups A and B. The top of the bladder was cut off and used as the outflow tract of the perfusion fluid in groups C and D. In groups A and C, 1% Triton X-100 was treated for 6 h, and 1% sodium dodecyl sulfate (SDS) was treated for 2 h. In groups B and D, 1% Triton X-100 was treated for 7 h, and 1% sodium dodecyl sulfate (SDS) was treated for 1 h. In addition, the tissue in the normal bladder group was directly obtained from the natural bladder tissue, which did not require perfusion, cryopreservation and thawing. The fast and efficient decellularization protocol was screened out through HE, DAPI, Masson trichrome and Alcian Blue staining and quantitative analyses to prepare the whole bladder scaffold. The prepared BAM was used as the scaffold material, and the ADSCs were used as the seeding cells to construct the tissue engineering bladder. HE and DAPI staining were used to observe the distribution of ADSCs on the BAM.Results:HE and DAPI staining showed that there was no obvious nuclear residue in the group C. Masson trichrome and Alcian Blue staining showed that the collagen structure and glycosaminoglycan were well preserved in the group C. There was no significant difference in bladder wall thickness between the group C and the normal bladder group [(975.44±158.62)μm vs.(1 064.49±168.52)μm, P > 0.05]. The DNA content in the group C [(43.59 ±4.59) ng/mg] was lower than that in the normal bladder group, group A, group B and group D [(532.50±26.69), (135.17±6.99), (182.49±13.69) and(84.00±4.38)ng/mg], and the difference was statistically significant ( P<0.05). The collagen content [(10.98 ± 0.29)μg/mg] and glycosaminoglycan content [(2.30±0.18)μg/mg] in group C were not significantly different with those in the normal bladder group [(11.69±0.49) and (2.36±0.09)μg/mg, P>0.05]. Scanning electron microscopy showed that a large number of pore structures could be observed on the surface of the prepared BAM in groups A-D and were facilitated to cell adhesion. The isolated and cultured ADSCs were identified by flow cytometry to confirm the positive expression of CD90 and CD29, and the negative expression of CD45 and CD106. Live/dead staining and CCK-8 detection confirmed that the prepared BAM in the group C had no cytotoxicity. HE and DAPI staining showed that a large number of ADSCs were distributed on the surface and inside of the tissue engineering bladder. Conclusions:The whole bladder shape BAM prepared by the self-designed perfusion decellularization system could be used as the scaffold material for bladder tissue engineering, and the constructed tissue engineering bladder could be used for bladder repair and reconstruction.

Objective:This study aimed to investigate the physical properties, biocompatibility, and 3D printing performance of a novel hybrid bioink composed of gelatin methacrylated (GelMA) and chitin nanocrystal (ChiNC).Methods:The study was conducted from May 2021 to December 2022, four different bioinks were prepared by adding varying amounts of ChiNC to GelMA bioink. The GelMA concentration in all four bioinks was 100 mg/ml, while the ChiNC concentrations were 0 mg/ml (no ChiNC added), 5 mg/ml, 10 mg/ml, and 20 mg/ml, respectively, named as GC0, GC5, GC10, and GC20 bioinks. The cross-sectional morphology of the hydrogels formed after photocuring the four bioinks was observed using scanning electron microscopy, and the porosity was calculated. Weighing the hydrogels before and after swelling, and then calculate the equilibrium swelling rate. HUVECs were seeded on the surfaces of the hydrogels prepared from the four bioinks and cultured in medium. Cell proliferation was assessed using CCK-8 assays at 1d, 3d, and 7d to compare the proliferation rates of cells on the four hydrogels. HUVECs were added to the four bioinks, and grid-like scaffolds were printed and cultured in medium. Live-Dead staining was performed at 1d and 7d to observe cell viability. Compare the printing effect of bioinks by observing its forming continuous threads properties during extrusion. Finally, tissue-engineered bladder patches simulating the mucosal layer, submucosal layer, and muscular layer anatomical structures of the bladder wall were 3D bioprinted using the optimized bioink composition, and the stability and fidelity of the printed structures were observed to further validate the feasibility of printing multi-layered complex structures with the bioink.Results:Scanning electron microscopy revealed that the porosity of the GC0, GC5, GC10, and GC20 hydrogels were (51.43±6.23)%, (51.85±6.47)%, (50.55±4.59)%, and (42.49±2.20)%, respectively. The differences in porosity between the GC0 group and the other three groups were not statistically significant ( P=0.9994, P=0.9948, P=0.1200). The equilibrium swelling ratio of the other three groups [(8.81±0.41), (7.95±0.19), (7.71±0.14)] was significantly lower than that of the GC0 group (9.37 ± 0.49), and the differences were statistically significant ( P=0.0457, P<0.01, P<0.01). CCK-8 assay showed no significant difference in absorbance value between the GC10 group (0.360±0.009) and the GC0 group (0.357±0.007), GC5 group (0.350±0.012), and GC20 group (0.345±0.018) on the first day ( P=0.9332, P=0.5464, P=0.4937). However, on the third day, the absorbance value of the GC10 group (0.755±0.012) was significantly higher than that of the GC0 group (0.634±0.010), GC5 group (0.704±0.009), and GC20 group (0.653±0.015) ( P<0.01, P=0.0033, P=0.0002). On the seventh day, the absorbance value of the GC10 group (1.001±0.031) was significantly higher than that of the GC0 group (0.846±0.026), GC5 group (0.930±0.043), and GC20 group (0.841±0.024)( P=0.0012, P=0.1390, P=0.0010). The addition of human umbilical vein endothelial cells (HUVECs) into the four groups of hydrogels enabled the printing of grid-like scaffolds, and Live-Dead staining was performed on day 1 and day 7. The cell viability of HUVECs in the four groups on day 1 was (90.13±1.63)%, (90.6±2.45)%, (92.58±2.15)%, and (91.40±3.17)%, respectively. There were no statistically significant differences between the GC0 group and the other three groups ( P=0.9869, P=0.3093, P=0.8008). On day 7, the cell viability was (89.97±3.10)%, (92.18±2.21)%, (92.05±2.25)%, and (90.12±1.97)% for the four groups, respectively. There were no statistically significant differences between the GC0 group and the other three groups ( P=0.3965, P=0.4511, P=0.9995). Bioink extrusion test showed that the GC0 hydrogel could be extruded continuously and form threads at temperatures between 24℃ and 25℃, while the GC10 hydrogel could be extruded continuously and form threads at temperatures between 24℃ and 27℃. Printing tissue engineered bladder patches simulating the anatomical structure of the bladder mucosal layer, submucosal layer, and muscular layer using GC10 bioink, and the printed patches were stable, without collapse, and had high fidelity. Conclusions:Adding ChiNC to GelMA promotes cell adhesion, proliferation, and expands the printing window of GelMA bioink. The biocompatibility of the mixed bioink prepared by adding 10 mg/ml ChiNC in GelMA is good, capable of printing tissue-engineered bladder patches that mimic the anatomical structure of natural bladder walls.

Objective To evaluate the clinical values ofintra-operative spinal digital subtraction angiography and selective intra-arterial injection of methylene blue for angiography in the surgical treatment of spinal dural ateriovenous fistula (SDAVF).Methods Four patients underwent microsurgical treatment combined with intra-operative spinal DSA for SDAVF in our hospital from January 2015 to December 2015 were chosen.Selective intra-arterial injection of methylene blue was applicated in three of them.The clinical data and treatment efficacy of these patients were retrospectively analyzed.Results Intra-operative spinal DSA and selective intra-arterial methylene blue injection were performed successfully and no complications occurred.The fistulae were all confirmed to be extirpated by intraoperative angiography.All the four patients who complicated with spinal nerve function impairment recovered to different extents in 4-9 months of follow-up.Modified Aminoff-Logue scale scores decreased by 1-3,with an average of 2.25 within the follow up period.Conclusion Intra-operative spinal DSA and selective intra-arterial injection of methylene blue for angiography are safe and effective,making the surgery conducted less invasively,especially in surgery for complex arteriovenous fistulas.

Acute Lung Injury ; drug therapy ; metabolism ; Animals ; Antipyrine ; analogs & derivatives ; therapeutic use ; Cytokines ; metabolism ; Free Radical Scavengers ; metabolism ; Lipid Peroxidation ; drug effects ; Male ; Rats ; Rats, Sprague-Dawley

Objective: To detect the methylation status of ribosomal S6 kinase 4 (RSK4)in papillary thyroid carcinoma (PTC)and to study its correlation with mRNA expression and clinical features. Methods: 134 cases PTC tissues and corresponding paracancerous thyroid tissues were collected. DNA methylation status of RSK4 gene in PTC tissues and corresponding paracancerous tissues were analyzed by methylation specific PCR and bisulfite genomic sequencing, and mRNA expression was detected by quantitative realtime PCR. The relationship of DNA methylation status with mRNA expression and clinical features was analyzed. Results: The methylation rate of RSK4 in PTC tissues was significantly higher than that in paracancerous tissues by methylation specific PCR (P<0.05)and bisulfite genomic sequencing (P<0.01). The RSK4 mRNA level in PTC tissues was significantly lower than that in paracancerous tissues (P<0.01). In PTC tissues, RSK4 mRNA expression in methylation group was lower than that in unmethylation group (P<0.01). The RSK4 mRNA level in PTC of methylation was lower than that in paracancerous tissues of methylation (P<0.01); the RSK4 mRNA level in PTC of unmethylation was also lower than that in paracancerous tissues of unmethylated ones (P<0.01). There was relationship of RSK4 hypermethylation with lymphatic metastasis and TNM grade (P<0.05). Serum concentrations of thyroid stimulating hormone, thyroid peroxidase antibody, and thyroglobulin antibody in methylation group were higher than those in unmethylation group (P<0.05). Conclusion The hypermethylation of RSK4 promoter′s CpG islands might be one of the mechanisms for poor expression of RSK4 in PTC, which may serve as a molecular target of early diagnosis and treatment.

Interactions between brain-resident and peripheral infiltrated immune cells are thought to contribute to neuroplasticity after cerebral ischemia. However, conventional bulk sequencing makes it challenging to depict this complex immune network. Using single-cell RNA sequencing, we mapped compositional and transcriptional features of peri-infarct immune cells. Microglia were the predominant cell type in the peri-infarct region, displaying a more diverse activation pattern than the typical pro- and anti-inflammatory state, with axon tract-associated microglia (ATMs) being associated with neuronal regeneration. Trajectory inference suggested that infiltrated monocyte-derived macrophages (MDMs) exhibited a gradual fate trajectory transition to activated MDMs. Inter-cellular crosstalk between MDMs and microglia orchestrated anti-inflammatory and repair-promoting microglia phenotypes and promoted post-stroke neurogenesis, with SOX2 and related Akt/CREB signaling as the underlying mechanisms. This description of the brain's immune landscape and its relationship with neurogenesis provides new insight into promoting neural repair by regulating neuroinflammatory responses.
Humans ; Ischemic Stroke ; Brain/metabolism* ; Macrophages ; Brain Ischemia/metabolism* ; Microglia/metabolism* ; Gene Expression Profiling ; Anti-Inflammatory Agents ; Neuronal Plasticity/physiology* ; Infarction/metabolism*