Background The progenesis and development of dry eye is closely associated with the stability of tear-film.Dry eyes often show the visual disturbance.Therefore,to evaluate the stability of tear-film based on visual quality and explore the relevant dynamic vision change in dry eyes is of important significance.Objective The aim of this study was to evaluate the dynamic changes of objective scattering index (OSI),modulation transfer function cut off (MTF cut off),objective visual acuity (OVA) with tear-film in the patients with mild or moderate dry eye disease using Optical Quality Analysis System.Methods A clinical diagnosis test was performed.Forty-two eyes of 42 consecutive patients with mild or moderate dry eyes were included in Tianjin Eye Hospital from December 2013 to May 2014 based on ‘ The Clinical Diagnosis and Treatment Recommendations for Dry Eye from Consensus of Expert Advice in 2013’,and 29 normal eyes of age-and gender-matched 29 healthy volunteers were simultaneously included as the healthy control group.The dynamic retinal images under non-blinking condition during 15 seconds were recorded by OQAS-Ⅱ system,and the OSI,MTF cut off and OVA values at 0,5,10 and 15 seconds were obtained,and the differences of OSI,MTF cut off and OVA between 0 second and 15 seconds were calculated (△OSI,△MTF cut off,△OVA).The dynamic changes of △OSI,△MTF cut off and △OVA with time were evaluated.The sensitivity and specificity of △OSI,△MTF cut off and △OVA for the differential diagnosis of dry eyes were analyzed by receiver operating characteristic curve (ROC curve).Results The OSI values at 5,10 and 15 seconds in the mild or moderate dry eye group were significantly higher than those at 0 second or those in the healthy control group (all at P＜0.05),and the MTF cut off values and OVA values at 5,10 and 15 seconds in the mild or moderate dry eye group were significantly lower than those at 0 second or those in the healthy control group (all at P＜0.05).The △OSI,△MTF cut off and △OVA values were 1.03±1.53,(-8.37±9.64)c/d and-0.30±0.32 in the mild or moderate dry eye group,which were significantly higher than 0.06± 0.16,(-0.37 ± 5.27) c/d and-0.03 ± 0.18 in the healthy control group (t=4.10,-5.19,-5.28,all at P＜0.05).The area under ROC curve was 0.90,0.79 and 0.78 in △OSI,△MTF cut off and △OVA,respectively.The sensitivity and specificity of △OSI was 78.6％ and 93.1％ respectively at the diagnostic cut off of 0.3.Conclusions The optical quality parameters related with tear-film stability are gradually reduced with extending of time in mild or moderate dry eyes,but they are stable in healthy eyes.The detecting outcomes by OQAS-Ⅱ system can reflect the dynamic status of tear-film,and this method is of important clinical value for the differential diagnosis and optical quality evaluation in dry eyes.

Objective To investigate the antitumor effect of Haishengsu injection extracted from marine shellfish. Methods Transplant tumor models of sarcoma 180 (S 180), Ehrlich ascites carcinoma (EAC), and hepatoma (Heps) in mice were established. Different doses of Haishengsu injection were given to the mice and the tumor inhibition rates of Haishengsu injection, life span of the mice were calculated. Results The tumor inhibition rates of haishengsu injection (490～1000mg?kg -1?d -1,iv) were 41.10%～49.08% in mice with S 180 and 36.29%～49.19% in mice with hepatoma,respectively. The same doses of Haishengsu injection prolonged the life spans of EAC-bearing mice by 22.93%～69.98%. Conclusion The haishengsu injection has the antitumor effects on the tumor-bearing mice without evident side effects.

Objective To observe the pharmacokinetics and concentration of 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU) in brain tissue after BCNU-polylactic acid (PLA) delayed release wafer embedded in brain tissues of dogs.Methods 10% BCNU-PLA delayed release wafer were prepared and embedded in brains of 12 dogs. Peripheral blood of dogs was taken and the animals were executed for brain tissue after surgery in different times. BCNU concentrations in blood and brain tissue were quantified by high-performance liquid chromatography.Results BCNU was able to be detected at 22nd hour, and the Cmax (average 243.64 ng/ml) appears at 35th hour after surgery. The average BCNU concentration in brain tissue was 26.60 μg/g at 5th day after surgery.Conclusion BCNU-PLA delayed release wafer is a useful type for treatment of malignant gliocoma.

Objective:To analyze the detection and influencing factors of work-related musculoskeletal disorders (WMSDs) of workers in an automobile manufacturing enterprise in Guangzhou City.Methods:In April 2020, a total of 7065 workers of an automobile manufacturing enterprise in Guangzhou City were selected as research subjects using cluster sampling method. The Nordic Musculoskeletal Questionnaire (NMQ) was used to investigate the detection of WMSDs. Multiple logistic regression analysis was used to analyze the influencing factors of WMSDs.Results:The detection rate of WMSDs was 43.9% (3102/7065) , among which the detection rate of multiple WMSDs was 31.4%. The detection rates of WMSDs in different parts from high to low were as follows: neck (24.5%) , shoulder (21.1%) and ankle (20.1%) . Multivariate logistic regression analysis showed that working experience of 3-8 years, >8 years, age>30 years old, repetitive work every day, multiple repetitions per minute, uncomfortable work posture, frequent overtime work and lack of staff in the department were risk factors for multi-site WMSDs ( P<0.05) . Adequate rest time was a protective factor for multi-site WMSDs ( P<0.05) . Conclusion:The detection rates of WMSDs in neck, shoulder, ankle, and multisite in automobile manufacturing enterprise are relatively high. The primary risk factors include adverse ergonomic factors and unreasonable organization of labour factors, optimize the work breaks can effectively reduce the risk of disease, effective ergonomic interventions should be carried out to prevent the occurrence of WMSDs among workers in the automobile manufacturing industry.

Objective:To investigate the occurrence of work-related musculoskeletal disorders (WMSDs) in the cabinet factory workers, and explore the influencing factors of workers' WMSDs.Methods:A cross-sectional survey method was used to investigate the risk factors such as basic conditions, labox dnganiza, ergonomics load and occurrence of WMSDs of 821 workers in a cabinet factory of a furniture manufacturing company in Guangdong Province using the electronic version of the Musculoskeletal Injury Questionnaire from October to December 2019. χ 2 test and logistic regression were used to analyze the risk factors leading to WMSDs. Results:The incidence of WMSDs in cabinet production workers reached 51.5% (423/821) , and the top three incidences were shoulder (28.4%, 233/821) , neck (28.1%, 231/821) , and wrist (25.9%, 213/821) . The incidence of neck WMSDs was statistically significant among different types of work ( P<0.05) . Multiple repetitive operations per minute ( OR=1.70) , torso often maintaining the same posture ( OR=1.61) , turning heads for a long time ( OR=1.58) and frequent heavy lifting ( OR=1.44) were risk factors for the occurrence of shoulder WMSDs ( P<0.05) . Frequent maintenance of the same posture in the neck ( OR=1.91) , repeated operations per minute ( OR=1.87) , shortage of department staff ( OR=1.65) and turning head for a long time ( OR=1.48) were risk factors for the occurrence of neck WMSDs ( P<0.05) . Long-term bending of the wrist ( OR=2.25) , grasping objects tightly ( OR=2.13) , working hard on the upper limbs or hands ( OR=1.91) , shortage of department personnel ( OR=1.84) , repeated operations per minute ( OR=1.68) and the use of vibration tools ( OR=1.51) were risk factors for the occurrence of WMSDs in the wrist ( P<0.05) . Conclusion:The incidence of WMSDs in cabinet factory is relatively high, the occurrence of WMSDs in the shoulders, necks and wrists is more serious. Reasonable labor organization and reducing the load of poor ergonomics in the workplace, can reduce the occurrence of WMSDs in production workers.

Objective:To analyze the detection and influencing factors of work-related musculoskeletal disorders (WMSDs) of workers in an automobile manufacturing enterprise in Guangzhou City.Methods:In April 2020, a total of 7065 workers of an automobile manufacturing enterprise in Guangzhou City were selected as research subjects using cluster sampling method. The Nordic Musculoskeletal Questionnaire (NMQ) was used to investigate the detection of WMSDs. Multiple logistic regression analysis was used to analyze the influencing factors of WMSDs.Results:The detection rate of WMSDs was 43.9% (3102/7065) , among which the detection rate of multiple WMSDs was 31.4%. The detection rates of WMSDs in different parts from high to low were as follows: neck (24.5%) , shoulder (21.1%) and ankle (20.1%) . Multivariate logistic regression analysis showed that working experience of 3-8 years, >8 years, age>30 years old, repetitive work every day, multiple repetitions per minute, uncomfortable work posture, frequent overtime work and lack of staff in the department were risk factors for multi-site WMSDs ( P<0.05) . Adequate rest time was a protective factor for multi-site WMSDs ( P<0.05) . Conclusion:The detection rates of WMSDs in neck, shoulder, ankle, and multisite in automobile manufacturing enterprise are relatively high. The primary risk factors include adverse ergonomic factors and unreasonable organization of labour factors, optimize the work breaks can effectively reduce the risk of disease, effective ergonomic interventions should be carried out to prevent the occurrence of WMSDs among workers in the automobile manufacturing industry.

Objective:To investigate the occurrence of work-related musculoskeletal disorders (WMSDs) in the cabinet factory workers, and explore the influencing factors of workers' WMSDs.Methods:A cross-sectional survey method was used to investigate the risk factors such as basic conditions, labox dnganiza, ergonomics load and occurrence of WMSDs of 821 workers in a cabinet factory of a furniture manufacturing company in Guangdong Province using the electronic version of the Musculoskeletal Injury Questionnaire from October to December 2019. χ 2 test and logistic regression were used to analyze the risk factors leading to WMSDs. Results:The incidence of WMSDs in cabinet production workers reached 51.5% (423/821) , and the top three incidences were shoulder (28.4%, 233/821) , neck (28.1%, 231/821) , and wrist (25.9%, 213/821) . The incidence of neck WMSDs was statistically significant among different types of work ( P<0.05) . Multiple repetitive operations per minute ( OR=1.70) , torso often maintaining the same posture ( OR=1.61) , turning heads for a long time ( OR=1.58) and frequent heavy lifting ( OR=1.44) were risk factors for the occurrence of shoulder WMSDs ( P<0.05) . Frequent maintenance of the same posture in the neck ( OR=1.91) , repeated operations per minute ( OR=1.87) , shortage of department staff ( OR=1.65) and turning head for a long time ( OR=1.48) were risk factors for the occurrence of neck WMSDs ( P<0.05) . Long-term bending of the wrist ( OR=2.25) , grasping objects tightly ( OR=2.13) , working hard on the upper limbs or hands ( OR=1.91) , shortage of department personnel ( OR=1.84) , repeated operations per minute ( OR=1.68) and the use of vibration tools ( OR=1.51) were risk factors for the occurrence of WMSDs in the wrist ( P<0.05) . Conclusion:The incidence of WMSDs in cabinet factory is relatively high, the occurrence of WMSDs in the shoulders, necks and wrists is more serious. Reasonable labor organization and reducing the load of poor ergonomics in the workplace, can reduce the occurrence of WMSDs in production workers.

Objective: The spatial distribution model of particulate matter based on time change in a specific place was established to analyze the spatial and temporal distribution characteristics and movement of particulate matter. Methods: A convenience store was selected as the research subject. The micro-climate and particle number concentration (PNC) of the site were detected, and numerical simulation was carried out by computational fluid dynamics (CFD) simulation method. Based on the discrete phase model, the temporal and spatial distribution characteristics and movement rules of simulated particles were analyzed. Results: The wind speed at the entrance of the convenience store was low and almost unchanged during the detection, while the wind speeds outside and inside outlets were high and changed sharply. The PNC of particle size of 0.02-1.00 μm was higher than that of particle size >1.00 μm (all P<0.05). The PNC with particle size of 0.02-1.00 μm from high to low were checkout counter, entrance, outer outlet and inner outlet (all P<0.05). The PNC of the checkout counter and entrance varies greatly, while the PNC of the outer outlet and inner outlet was relatively steady. The CFD simulation results showed that particles exhaled by individuals near the entrance of the checkout counter of the convenience store could be expelled outdoors more quickly with the influence of airflow. However, particles exhaled by individuals in the middle of the shelves remained suspended indoors for a longer period of time compared to those near the checkout counter. Particles emitted from the air conditioning outlet diffuse throughout the entire store and reach a steady state in 300 seconds. Conclusion: The particulate matter in the convenience store was mainly small particle with the size less than 1.00 μm. The residence time, downward trend and number of suspended particulates of human exhaled particles were related to air flow. The particulates escaped from the air conditioner could quickly spread to almost the entire convenience store.

Objective:To investigate the feasibility of single breath-hold TFE-EPI in non-contrast coronary MRA on 3.0 T MRI.Methods:Both single breath-hold TFE-EPI and free breathing TFE were conducted in 23 healthy volunteers. Acquisition time between the two sequences were compared by paired- t-test analysis. Signal-noise-ratio (SNR), contrast-noise-ratio (CNR),image artifacts and distortion,vessel acuity were evaluated on the aorta(Ao), right coronary artery proximal(RCA-pro), right coronary artery middle (RCA-mid), left anterior descending proximal(LAD-pro) and left circumflex proximal(LCX-pro). Nonparametric analyses were conducted for the comparison. Results:The acquisition time decreased 96.51% in TFE-EPI compared with TFE [(16.3±2.2)s vs.(466.9±101.3)s, t=21.49, P<0.01]. There was no statistical significance in SNR comparison in all the vessel evaluation (all the P>0.05). TFE-EPI showed better CNR in RCA-mid than TFE ( Z=2.65, P=0.008). TFE-EPI showed less image artifacts and distortion in RCA-mid than TFE ( Z=2.00, P=0.046). TFE-EPI also showed better vessel acuity in both RCA-pro and RCA-mid than TFE ( Z=3.88, P<0.001; Z=3.42, P=0.001). Conclusion:Single breath-hold TFE-EPI could greatly shorten scan time while ensuring image quality in coronal artery imaging and has a broad application in future.

{L-End}Objective To analyze the prevalence of multi-site work-related musculoskeletal disorders (WMSDs) and their influencing factors among workers in the chemical pharmaceutical industry. {L-End}Methods A total of 563 workers from three chemical pharmaceutical factories in Guangzhou City were selected as the research subjects using the judgment sampling method. The prevalence of multi-site WMSDs in the past 12 months was investigated using the electronic questionnaire of Chinese Version of Musculoskeletal Disorders Questionnaire. {L-End}Results The prevalence of multi-site WMSDs in the research subjects was 30.0% (169/563). The results of multivariable logistic regression analysis showed that workers who smoked regularly/frequently and those who had their hands above shoulder level for long periods of time had a lower risk of multi-site WMSDs than those who never/occasionally smoked (all P≤0.05). Workers with a high school, secondary specialty, college degree, or above had a lower risk of multi-site WMSDs than those with a middle school education or below (all P<0.05). The longer the daily working hours, the higher the risk of multiple WMSDs (all P<0.05). Workers with regular/frequently work shifts had a lower risk of multi-site WMSDs than those with none/occasional work shifts (P<0.05). {L-End}Conclusion The prevalence of multi-site WMSDs among workers in the chemical pharmaceutical industry is relatively high. The influencing factors are individual factors, unreasonable work organization and poor ergonomics factors.