Objective:To compare the changes in pelvic floor electrophysiology and imaging in female patients with myofascial pelvic pain (MFPP), and to explore the characteristics and significance of these changes.Methods:A total of 49 MFPP patients who were admitted to the of Dalian Women′s and Children′s Medical Center (Group) from January 2019 to October 2021 were randomly selected as the research group, and 41 healthy women during the same period were selected as the control group. Both groups filled in the center′s medical history and general condition survey form. French PHENIX series pelvic floor muscle potential detection instrument was used to detect the resting vaginal muscle potential and maximum muscle potential of the two groups. The static tension, dynamic tension and pelvic floor muscle contraction force of the two groups were measured by French PHENIX series electronic tensioning apparatus with 5° and 10° opening respectively. Two dimensional transperineal ultrasound and three dimensional transvaginal ultrasound produced by B-K Company in Denmark were used to measure the length between the lower margin of the bladder neck from the symphysis pubis and the bladder neck and the bladder bottom (BND, BSD), the diameter of the genital tract hiatus and the angle of the anus and rectum. The area, anterior-posterior diameter, transverse diameter and different damage degrees of levator ani levator were measured.Results:The resting muscle potential of the study group was higher than that of the control group: 2 μV vs. 1 μV ( P<0.05); the maximum vaginal myopotential was higher than that of the control group: 7 μV vs. 6 μV ( P<0.05). The static tension, dynamic tension and contractile force: 204 g/m 2 vs. 175 g/m 2, 450 g/m 2 vs. 410 g/m 2 and 237 g/m 2 vs. 51 g/m 2 of pelvic floor muscle in the study group were higher than those in the control group when the tensioner was opened for 5° ( P<0.05). In resting state, BND, BSD and reproductive tract hiatus diameter in the study group were smaller than those in the control group: 14.0 mm vs. 16.7 mm, 15.3 mm vs. 19.7 mm, 46.7 mm vs. 49.5 mm ( P<0.05). The anal angle was greater than that of the control group: 129° vs. 112° ( P<0.05). The anal right angle in the study group was greater than that in the control group: 113° vs. 109° ( P<0.05). In the resting state, the area of levator ANI hiatus: 10.1 cm 2 vs. 11.6 cm 2, anterior and posterior diameters: 44.2 mm vs. 47.4 mm, transverse diameters and the defect scores of levator ani in the study group were all smaller than those in the control group ( P<0.05). Conclusions:MFPP presents with persistent pelvic floor muscle spasm and loss of coordination. MFPP can be treated by spasmolysis of pelvic floor muscle and fascia, which provides reference value for clinical treatment.

Objective:To evaluate the effect of neuromuscular and vascular electrical stimulation in the treatment of postpartum diastasis recti abdominis.Methods:Adopting a prospective research approach, 100 patients with postpartum diastasis recti abdominis in Dalian Women and Children′s Medical Group from January 2020 to June 2023 were selected. The patients were divided into control group and observation group according to the random digits table method, with 50 cases in each group. The patients in control group were treated with neuromuscular electrical stimulation, and the patients in observation group were treated with vascular electrical stimulation. In curled abdominal position, the separation distance of recti abdominis 3 cm above the umbilicus, parallel umbilicus and 2 cm below the umbilicus before and after treatment, and the recovery rate (separation distance of recti abdominis after treatment ≤ 2 cm) were compared between the two groups.Results:In curled abdominal position, there were no statistical difference in separation distance of recti abdominis 3 cm above the umbilicus and 2 cm below the umbilicus before treatment between the two groups ( P>0.05); the separation distance of recti abdominis parallel umbilicus before treatment in observation group was significantly larger than that in control group: (35.26 ± 6.13) mm vs. (30.06 ± 6.18) mm, and there was statistical difference ( P<0.01). After treatment, the separation distance of recti abdominis 3 cm above the umbilicus, parallel umbilicus and 2 cm below the umbilicus in both two group was significantly reduced, the improvement in the observation group was significantly better than that in the control group: (24.33 ± 4.78) mm vs. (26.79 ± 5.77) mm, (16.38 ± 4.52) mm vs. (20.48 ± 4.50) mm and (15.34 ± 5.16) mm vs. (18.03 ± 7.27) mm, there were statistical differences ( P<0.01 or <0.05). The recovery rate in observation group was significantly higher than that in control group: 92.0% (46/50) vs. 74.0% (37/50), and there was statistical difference ( χ2 = 5.74, P<0.05). Conclusions:Both neuromuscular and vascular electrical stimulation can promote the healing of postpartum diastasis recti abdominis, and the therapeutic effect of vascular electrical stimulation is better than that of neuromuscular electrical stimulation.

The incidence of osteoporotic thoracolumbar vertebral fracture (OTLVF) in the elderly is gradually increasing. The kyphotic deformity caused by various factors has become an important characteristic of OTLVF and has received increasing attention. Its clinical manifestations include pain, delayed nerve damage, sagittal imbalance, etc. Currently, the definition and diagnosis of OTLVF with kyphotic deformity in the elderly are still unclear. Although there are many treatment options, they are controversial. Existing guidelines or consensuses pay little attention to this type of fracture with kyphotic deformity. To this end, the Lumbar Education Working Group of the Spine Branch of the Chinese Medicine Education Association and Editorial Committee of Chinese Journal of Trauma organized the experts in the relevant fields to jointly develop Clinical guidelines for the diagnosis and treatment of osteoporotic thoracolumbar vertebral fractures with kyphotic deformity in the elderly ( version 2024), based on evidence-based medical advancements and the principles of scientificity, practicality, and advanced nature, which provided 18 recommendations to standardize the clinical diagnosis and treatment.

Bone organoids can simulate the complex structure and function of the bone tissues, which makes them a frontier technology in organoid researches. Bone organoids show a tremendous potential of applications in bone disease modeling, bone injury repair, and medicine screening. Although advancements have been made so far in constructing bone organoids with functional structures like mineralization, bone marrow, trabecular bone, callus, woven bone, etc, the researches in this field are confronted with numerous challenges such as lack of standardized construction strategies and unified evaluation criteria, which limits their further promotion and application. To standardize researches in bone organoids, the Orthopedic Expert Committee of Geriatric Branch of Chinese Association of Gerontology and Geriatrics, the Youth Osteoporosis Group of Orthopedic Branch of Chinese Medical Association, the Osteoporosis Group of Orthopedic Surgeon Branch of Chinese Medical Doctor Association, and the Osteoporosis Committee of Shanghai Association of Integrated Traditional Chinese and Western Medicine organized related experts to formulate Expert consensus on the construction, evaluation, and application of bone organoids ( version 2024) based on an evidence-based approach. A total of 17 recommendations were put forth, aiming to standardize researches and clinical applications of bone organoids and enhance their value in scientific research and clinical practice.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Diabetes mellitus(DM)is a disease syndrome characterized by chronic hyperglycaemia.A long-term high-glucose environment leads to reactive oxygen species(ROS)production and nuclear DNA damage.Human umbilical cord mesenchymal stem cell(HUcMSC)infusion induces significant antidiabetic effects in type 2 diabetes mellitus(T2DM)rats.Insulin-like growth factor 1(IGF1)receptor(IGF1R)is important in promoting glucose metabolism in diabetes;however,the mechanism by which HUcMSC can treat diabetes through IGF1R and DNA damage repair remains unclear.In this study,a DM rat model was induced with high-fat diet feeding and streptozotocin(STZ)administration and rats were infused four times with HUcMSC.Blood glucose,interleukin-6(IL-6),IL-10,glomerular basement membrane,and renal function were examined.Proteins that interacted with IGF1R were determined through coimmunoprecipitation assays.The expression of IGF1R,phosphorylated checkpoint kinase 2(p-CHK2),and phosphorylated protein 53(p-p53)was examined using immunohistochemistry(IHC)and western blot analysis.Enzyme-linked immunosorbent assay(ELISA)was used to determine the serum levels of 8-hydroxydeoxyguanosine(8-OHdG).Flow cytometry experiments were used to detect the surface markers of HUcMSC.The identification of the morphology and phenotype of HUcMSC was performed by way of oil red"O"staining and Alizarin red staining.DM rats exhibited abnormal blood glucose and IL-6/10 levels and renal function changes in the glomerular basement membrane,increased the expression of IGF1 and IGF1R.IGF1R interacted with CHK2,and the expression of p-CHK2 was significantly decreased in IGF1R-knockdown cells.When cisplatin was used to induce DNA damage,the expression of p-CHK2 was higher than that in the IGF1R-knockdown group without cisplatin treatment.HUcMSC infusion ameliorated abnormalities and preserved kidney structure and function in DM rats.The expression of IGF1,IGF1R,p-CHK2,and p-p53,and the level of 8-OHdG in the DM group increased significantly compared with those in the control group,and decreased after HUcMSC treatment.Our results suggested that IGF1R could interact with CHK2 and mediate DNA damage.HUcMSC infusion protected against kidney injury in DM rats.The underlying mechanisms may include HUcMSC-mediated enhancement of diabetes treatment via the IGF1R-CHK2-p53 signalling pathway.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Osteochondral lesions of the talus (OLT) was defined as lesions involving the articular cartilage and subchondral bone of the talus. The most common cause of OLT is trauma including ankle sprains and fractures, while other causes include non-traumatic factors such as chronic ankle injuries. The diagnosis of OLT is made by combining the patient′s medical history, symptoms and signs, and imaging studies such as X-ray, CT and MRI. Microfracture(MF) is the gold standard of treatment for injuries smaller than 150 mm 2, and while different drill diameters and depths have different effects on outcomes. The overall long-term outcome of MF is of concern. The choice of various restorative or rehabilitative procedures based on the patients’ symptoms, lesion size and staging, as well as the combination with arthrocentesis biotherapy, is a new trend in the treatment of OLT. In addition, for OLT combined with chronic lateral ankle instability(CLAI), ankle impingement or lower limb malalignment, one-stage combined treatment will improve the prognosis of patients. The coming of a new kind of material and a technique, such as hydrogel or organoids, makes a bright future foreseeable.

Objective To assess the biomechanical differences between the artificial ankle joints INBONE Ⅱ and INFINITY after total ankle arthroplasty(TAA)to provide more scientific and individualized treatment options for patients.Methods A patient-individualized TAA lower extremity MSK MBD model was established using the musculoskeletal(MSK)multibody dynamics(MBD)software AnyBody.The ankle joint contact force,motion,and contact characteristics of artificial ankle joint surfaces were predicted.Results The geometric shape of the articular surface of the artificial ankle had no significant effect on the ankle contact force,but it affected the range of motion and contact characteristics of the articular surface.Compared with INBONE Ⅱ,the coronal plane articular surface arc height of INFINITY was lower,and increased the inversion-eversion and external rotation-internal rotation movements by 7.91%and 2.61%,respectively.Sagittal plane matching was lower,and reduced posterior-anterior and inferior-superior movements by 21.75%and 21.23%,respectively,and medial-lateral movement increased by 49.26%.INFINITY exhibited lower matching with decreases of 18.48%,30.42%,and 26.36%in the medial,lateral,and total joint surface contact areas,respectively.However,the center of the pressure motion trajectory was concentrated on the medial side,while avoiding edge contact stress concentration and reducing the risk of joint dislocation and premature wear of the tibial component.Conclusions The smaller geometric constraints of the INFINITY artificial ankle joint demonstrated better biomechanical performance,thereby promoting improved postoperative ankle joint functional recovery.

Purpose/Significance Based on the typical use scenario of sensitive personal information in medical and health institu-tions,the implementation of the secure use of sensitive personal information is explored.Method/Process For user registration,internal utilization and interaction,medical device/wearable device collection and information disclosure and other scenarios,the paper analyzes the risk of sensitive personal information leakage,explores the application scenarios,advantages and disadvantages of various technical means such as identity authentication,access control,data encryption,data desensitization and detection audit.Result/Conclusion The application of technical means can assist medical and health institutions to further protect the security of patients'personal information.