Adipocyte derives from multipotential stem cell.During the course of differentiation, it covers multipotential stem cell,adipoblast,preadipocyte,immature adipose cell,adipocyte.Each stage has its singular cellular phenotype and specific molecular marker.This article is aimed to review the advance research of this aspect.

Background:Adipocytokines are associated with energy homeostasis and mediate various immune responses and inflammatory reactions.Vaspin is a novel adipocytokine that is thought to be associated with inflammatory reaction.Aims:To investigate the serum vaspin level and its clinical significance in patients with active ulcerative colitis (UC).Methods:Serum vaspin level was determined by ELISA in 150 patients with active UC and 150 healthy controls in Suzhou Municipal Hospital from January 2008 to April 2013,and the correlation of serum vaspin level with the clinical characteristics of UC was analyzed.Results:Serum vaspin level in patients with UC was significantly higher than that in normal controls [(1.86 ±0.38)μg/L vs.(0.96 ±0.43)μg/L,P <0.01].There was significant positive correlation between serum vaspin level and serum CRP and disease activity index in UC patients (r =0.628,P <0.01;r =0.514,P <0.05),but serum vaspin level was not correlated with serum ESR and location of UC (r =0.098,P >0.05;r =0.124,P >0.05).Conclusions:Vaspin may play an important role in the pathophysiology of UC.

ObjectiveTo observe the effect of early rehabilitation on patients with acute severe brain injury.Methods180 cases with acute severe brain injury were tr eated with early rehabilitation measurements consisted of breath rehabilitation,passive activity of joints in range of joint motion, body posture change,preve ntion of the lower urinary tract infection, and rehabilitation with Traditional Chinese Medicine,etc.Results18 patients (8.3%) co mplicated infection of lungs during the acute stage, no patient died of complica tions.Conclusions The early rehabilitation can pre vent patients with severe brain injury from complications and improve the effica cy of the treatment.

Diagnosis, Differential ; Humans ; RNA, Viral ; genetics ; Reverse Transcriptase Polymerase Chain Reaction ; SARS Virus ; genetics ; Sequence Analysis, DNA ; Severe Acute Respiratory Syndrome ; diagnosis ; virology

Objective To detection the methylation of p16INK4A in primary hepatocellular carcinoma, a nested bisulfite sequencing and methylation-specific polymerase chain reaction (BS-MSP) protocol was designed and used.Methods Bisulfite-modified DNA were amplified to evaluate the quality of templates with a pair of bisulfite sequencing primers in the first round of PCR, then subjected to methylation assay with corresponding methylation or unmethylation specific PCR primers.Representative PCR products were sequenced to confirm its correctness.Results 3 of 40 cases (7.5%) were failed to assay due to poor quality of templates, and 29 of 37 cases (78%) were detected p16INK4A methylation.Sequencing results confirmed that templates were correctly amplified.Conclusion BS-MSP technique might be valuable for methylation study on carcinogenesis and clinical assay.

BACKGROUND:To construct tissue engineering cartilage would open up a novel way for the repair of cartilage damage in avoidance of the disadvantages of traditional therapeutic method.OBJECTIVE: To probe the techniques for the isolation of mesenchymal stem cells (MSCs) from bone marrow, as well as the in vitro differentiation into chondrocytic phenotype in a specific culture fluid.DESIGN:A complete randomized experimentSETTING:The Department of Traumatic Orthopedics and Hand Surgery of the First Affiliated Hospital of Guangxi Medical University, and Teaching and Research Faculty of Histology and Embryology of Guangxi Medical University.METHODS: The experiment was carried out at Guangxi Medical University between August 2002 and April 2003. Twenty SD neonatal weaning rats were selected. Bone marrow was aspirated from the bones of rat limbs and was isolated by gradient centrifugation in Percoll, and MSCs could be obtained in combination with adherent screening method, which were then cultured in DMEM-LG with 15% fatal bovine serum (FBS) in the incubator of 37℃ with 5% CO2 for 10-14 days. The passage cells were induced in DMEM-HG with 15% FBS (containing TGF-β1 10 μg/L, 10-7 mol/L dexamethasone, 50 mg/L VitC).MAIN OUTCOME MEASURES :The morphology, growth, as well as proliferation and specific expression of chondrogenic matrix of in vitro cultured MSCs due to specific induction.RESULTS: Totally 20 SD rats were observed and analyzed with no loss SCs grew in visible symmetric colonies, displaying a long-spindle shape,and the morphological characteristics of marrow-derived MSCs had no obvious changes during passage-culture, but its proliferation time was found from a shuttle fibroblastic appearance to polygonal shape, displaying posiHC staining of type Ⅱ collagen of cartilage specific matrix.bronectin adherent screening technique is a convenient, effective and practical method to separate and collect MSCs from rat bone marrows in chondrogenic phenotype when induced by a specific medium and can secrete cartilage specific matrix, and they can be the optimal seed cells for cartilage tissue engineering.

On the basis of the development of a new CE method for the analysis of α-lactalbumin (α-Lac), β-lactoglobulin A(β-LgA) and β-lactoglobulin B(β-LgB), different concentrations of acetic acid (HAc) and trichloroacetic acid (TCA) for the removal of proteins in raw milk, infant formula A and B, and yogurt were investigated.It was shown that TCA is better than HAc for eliminating of proteins in the above four samples.The proteins in 2 g of raw milk could be eliminated by 3 mL of 100 g/L TCA.0.5 g of infant formula A and B needs 5 mL of 10 g/L and 20 g/L TCA to remove the proteins, respectively.For 2 g of yogurt, 3 mL of 20 g/L TCA is enough.The present research may provide valuable information for protein-containing sample (such as raw milk, infant formula and yogurt) pretreatment.

Objective To evaluate changes in cerebral blood flow before and after cranioplasty by 256-slice Spiral CT perfusion imaging,and evaluate the effect of cranioplasty on the cerebral blood flow in patients with skull defect.Methods 256-slice spiral CT scan was performed in 20 cases with early cranioplasty surgery,CTP check time points were 1 to 2 days before and 10 to 14 days after cranioplasty surgery.We recorded the the CBF and CBV of the cortex,basal ganglia,and thalamus and other parts,MTT on rCBV,parameter values rCBF,MTT and 1TrP etc.and analyzed and compared.(RCBF,rCBV,MTT and TTP) Results The CBF of cortex after cranioplasty at injured side had statistically significant increase (P＜0.05).The CBF of cortex,basic nuclei,thalamus on contrateral had no statistically significant difference.The cerebral blood flow on both sides of the basal ganglia and the thalamus was increased after surgery,but there was no significant difference between before and after surgery (P＞0.05) Conclusion Cranioplasty can significantly improve the ipsilateral cortex cerebral blood flow,and CT brain perfusion can accurately assess changes in brain tissue blood flow before and after cranioplasty.

AIM: To compare the visual acuity and contrast sensitivity of eyes with different corneal spherical aberration implanted with the same aspherical IOL and evaluate the effect of different ocular spherical aberration on visual performance after phacoemulsification.
METHODS:It was a prospective case series study. Forty-six eyes of thirty-nine age-related cataract patients in our department were included. The patients were divided into 3 groups according to the value of preoperative corneal spherical aberration. Eyes with corneal spherical aberration≤0. 2μm were assigned to group A, those with corneal spherical aberration >0. 2μm and ≤0. 3μm to group B, and those with corneal spherical aberration≥ 0. 3μm to group C. All patients underwent phacoemulcification and recieved AcrySof IQ aspheric IOL. Uncorrected visual acuity ( UCVA ) , best-corrected visual acuity( BCVA) , contrast sensitivity, and total ocular higher - order aberrations for a 6. 0mm pupil were recorded 3mo postoperatively. ANOVA were used to analyze the data.
RESULTS: There were no significant differences in UCVA and BCVA between the 3 groups (P=0. 287, 0. 115). Contrast sensitivity was no statistically significant difference between the 3 groups at any spatial frequency under photopic、 mesopic, and mesopic with glare conditions (P>0. 05). With a 6. 0mm pupil diameter, root mean square values for total ocular higher - order aberrations were lower in groups A and B than that in group C (P=0. 000). The difference of total ocular spherical aberration was statistically significant between the 3 groups (P=0. 000). Coma and trefoil were similar between the groups (P=0. 788,0. 590), with no statistically significant differences.CONCLUSION:Implantation of the same aspherical IOL in eyes with different corneal spherical aberration results in similar visual acuity and contrast sensitivity. Small differences of ocular spherical aberration after phacoemulsification have no effect on visual performance.

BACKGROUND:3D printing technology for preoperative planning has been a trend at present. Moreover, this technology has been extensively used in bone tumor resection and maxilofacial surgery, but seldom used in fracture repair. OBJECTIVE: To explore the value of 3D printing technology application in preoperative evaluation of pelvic fracture, planning and during surgery. METHODS:Pelvic fracture patients underwent preoperative CT scan. Pelvic models of the patients were printed using 3D printing technology at 1:1. Preoperative processing was conducted, including choice of approach, design of incision exposure range, design of fracture reduction, pre-implantation position of the steel plate, optimal plastic design of steel plate, measurement of screw length and design of screw direction. Matta score of pelvic fracture reduction and Majeed score of pelvic function after repair were measured during folow-up. RESULTS AND CONCLUSION:The operation time was 55-130 minutes, averagely (84.75±20.15) minutes. Intraoperative blood loss was 200-800 mL, averagely (417.00±173.58) mL. After operation, no incision infection, fracture nonunion, fixator loosening or breakage appeared. Al patients were folowed up for 8-24 months. The fracture healing time was 10-16 weeks, averagely 12.5 weeks. Fracture reduction was assessed according to Matta scoring: excelent in 15 cases, good in 3 cases, average in 2 cases, and poor in 0 case, with an excelent and good rate of 90%. Postoperative function was assessed according to Majeed scoring: excelent in 13 cases, good in 5 cases, average in 2 cases, and poor in 0 case, with an excelent and good rate of 90%. These findings showed that the application of 3D printing technology in pelvic fracture can determine the fracture’s displacement, is helpful for accurate reduction and plate modeling, reduces surgery duration and intraoperative blood loss and complication, finaly achieves better surgical result. 3D printing technology can better evaluate and plan the pelvic fracture before repair, and can be used as a routine project preparation of pelvic fracture repair.