Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective To observe the value of deep learning(DL)models for automatic classification of echocardiographic views.Methods Totally 100 patients after heart transplantation were retrospectively enrolled and divided into training set,validation set and test set at a ratio of 7∶2∶1.ResNet18,ResNet34,Swin Transformer and Swin Transformer V2 models were established based on 2D apical two chamber view,2D apical three chamber view,2D apical four chamber view,2D subcostal view,parasternal long-axis view of left ventricle,short-axis view of great arteries,short-axis view of apex of left ventricle,short-axis view of papillary muscle of left ventricle,short-axis view of mitral valve of left ventricle,also 3D and CDFI views of echocardiography.The accuracy,precision,recall,F1 score and confusion matrix were used to evaluate the performance of each model for automatically classifying echocardiographic views.The interactive interface was designed based on Qt Designer software and deployed on the desktop.Results The performance of models for automatically classifying echocardiographic views in test set were all good,with relatively poor performance for 2D short-axis view of left ventricle and superior performance for 3D and CDFI views.Swin Transformer V2 was the optimal model for automatically classifying echocardiographic views,with high accuracy,precision,recall and F1 score was 92.56％,89.01％,89.97％and 89.31％,respectively,which also had the highest diagonal value in confusion matrix and showed the best classification effect on various views in t-SNE figure.Conclusion DL model had good performance for automatically classifying echocardiographic views,especially Swin Transformer V2 model had the best performance.Using interactive classification interface could improve the interpretability of prediction results to some extent.

Traumatic supraorbital fissure syndrome (TSOFS) is a symptom complex caused by nerve entrapment in the supraorbital fissure after skull base trauma. If the compressed cranial nerve in the supraorbital fissure is not decompressed surgically, ptosis, diplopia and eye movement disorder may exist for a long time and seriously affect the patients′ quality of life. Since its overall incidence is not high, it is not familiarized with the majority of neurosurgeons and some TSOFS may be complicated with skull base vascular injury. If the supraorbital fissure surgery is performed without treatment of vascular injury, it may cause massive hemorrhage, and disability and even life-threatening in severe cases. At present, there is no consensus or guideline on the diagnosis and treatment of TSOFS that can be referred to both domestically and internationally. To improve the understanding of TSOFS among clinical physicians and establish standardized diagnosis and treatment plans, the Skull Base Trauma Group of the Neurorepair Professional Committee of the Chinese Medical Doctor Association, Neurotrauma Group of the Neurosurgery Branch of the Chinese Medical Association, Neurotrauma Group of the Traumatology Branch of the Chinese Medical Association, and Editorial Committee of Chinese Journal of Trauma organized relevant experts to formulate Chinese expert consensus on the diagnosis and treatment of traumatic supraorbital fissure syndrome ( version 2024) based on evidence of evidence-based medicine and clinical experience of diagnosis and treatment. This consensus puts forward 12 recommendations on the diagnosis, classification, treatment, efficacy evaluation and follow-up of TSOFS, aiming to provide references for neurosurgeons from hospitals of all levels to standardize the diagnosis and treatment of TSOFS.

Objective:To investigate the correlation between serum SET domain bifurcated 1 (SETDB1), cyclooxygenase-2 (COX-2) levels and bone metabolism indexes in perimenopausal osteoporosis patients.Methods:71 patients with perimenopausal osteoporosis admitted to Haining Maternal and Child Health Hospital from Aug. 2018 to Aug. 2021 were selected as the study group, and 50 healthy subjects were selected as the control group. The general data, bone mineral density and bone metabolism of the two groups were determined. The concentrations of SETDB1 and COX-2 in serum were determined by ELISA. Correlation analysis was performed to determine the correlation between serum SETDB1 and COX-2 levels and bone metabolism indexes. ROC curve was used to analyze the value of serum SETDB1 and COX-2 levels in the diagnosis of perimenopausal osteoporosis.Results:Compared with the control group, bone mineral density, PINP and osteocalcin levels were decreased in the study group, but CTX levels were increased (all P<0.05). In addition, compared with the control group (52.85±7.96) (4.88±1.00), the concentration of SETDB1 in the study group was decreased (40.25±7.08), but the concentration of COX-2 was increased (7.28±2.09) ( t=9.16, P<0.001; t=5.62, P<0.001). SETDB1 concentration was positively correlated with PINP and osteocalcin, and negatively correlated with CTX concentration ( r=0.36, -0.40, 0.34, P<0.001). However, COX-2 concentration was negatively correlated with PINP and osteocalcin, and positively correlated with CTX concentration ( r=-0.35, 0.42, -0.37, P<0.001). Serum SETDB1 and COX-2 were both effective indicators for the diagnosis of perimenopausal osteoporosis (AUC=0.81, P<0.01; AUC=0.79, P<0.001) . Conclusion:Serum SETDB1 and COX-2 levels can be used as diagnostic indexes for perimenopausal osteoporosis patients, and they are correlated with bone metabolism indexes.

Acid-base dissociation constant (pK_a) is a key physicochemical parameter in chemical science, especially in organic synthesis and drug discovery. Current methodologies for pK_a prediction still suffer from limited applicability domain and lack of chemical insight. Here we present MF-SuP-pK_a (multi-fidelity modeling with subgraph pooling for pK_a prediction), a novel pK_a prediction model that utilizes subgraph pooling, multi-fidelity learning and data augmentation. In our model, a knowledge-aware subgraph pooling strategy was designed to capture the local and global environments around the ionization sites for micro-pK_a prediction. To overcome the scarcity of accurate pK_a data, low-fidelity data (computational pK_a) was used to fit the high-fidelity data (experimental pK_a) through transfer learning. The final MF-SuP-pK_a model was constructed by pre-training on the augmented ChEMBL data set and fine-tuning on the DataWarrior data set. Extensive evaluation on the DataWarrior data set and three benchmark data sets shows that MF-SuP-pK_a achieves superior performances to the state-of-the-art pK_a prediction models while requires much less high-fidelity training data. Compared with Attentive FP, MF-SuP-pK_a achieves 23.83% and 20.12% improvement in terms of mean absolute error (MAE) on the acidic and basic sets, respectively.

ObjectiveTo investigate the dietary preference and nutritional knowledge needs of the elderly people who dined at meal service sites. MethodsUsing the form of stratified and convenience sampling method with self-designed questionnaire was used， in November 2021， to select 700 elderly people who dine at meal service sites in 7 jurisdictions in Shanghai were selected， and a self-designed questionnaire was used to investigate the basic information. Results91.64% of the elderly surveyed would eat at relatively fixed meal service sites， and the total Dietary Diversity Score （DDS9） was 3.56±1.46. 41.45% of the elderly with diseases preferred unhealthy cooking methods. Only 8.03% of the surveyed seniors said they were unwilling to accept targeted and personalized nutrition tips and reminders. Multivariate logistic regression analysis showed that the probability reaching the “understanding” level of “Food Guide Pagoda for Chinese Residents” and “Four Principles Recommended by the Core Dietary Guidelines for the Elderly” was different in the elderly with different education levels. The willingness of the elderly to expect to receive different nutrition tips and reminders was related to whether they cared about the corresponding contents. There was a statistically significant difference （P<0.05） among the elderly who were concerned about different health problems in terms of the willingness to receive different nutritional tips. There were significant differences in the proportion of elderly people with different health status for intervention （χ²=5.402， P<0.05）. ConclusionThe elderly who dine at meal service sites are highly dependent on the sites， have a low level of dietary diversification， and do not have a high degree of understanding of nutrition-related knowledge， and have a high demand for targeted nutritional interventions. Nutritional interventions for the sick elderly should be piloted through multiple channels.