Objective To observe the expression and the distribution of Netrin-1 in the spastic and normal segment of colon in patients with Hirschsprungs disease (HD) and investigate the relationship between Netrin-1 and development of HD.Methods Colon specimens of 36 cases with HD were selected for this study.Normal segment of colon served as the control group,while the spastic segments of colon as the lesion group.Immunohistochemical staining was applied to detecte the expression and the distribution of Netrin-1.Results Immunohistochemical staining showed that the expression of netrin-1 was positive in the intestinal muscular layers (longitudinal muscle,circular muscles),myenteric ganglias and mucosal layers in the control group.However,the expression of Netrin-1 was also positive in muscular layers and mucosal layer in the lesion group.There was no significant difference in the expression intensity of Netrin-1 between the two groups (P ＞0.05).Conclusion The expression of Netrin-1 in both the control group and the lesion group may indicate that netrin-1 have no significant correlation with genesis of HD.

OBJECTIVETo photoelastically investigate the difference in load distribution of Tension More (TM) implants with different conical angle designs.

METHODSThe following five groups of implants of different conical angles were designed: cylinder implant, upper 1/3 TM implant (taper length of 3 mm); 1/2 TM implant (taper length of 5 mm); lower 1/3 TM implant (taper length of 7 mm); and bottom TM implant (taper length of 10 mm). The implants were centrally located in individually photoelastic models consisting of a simulated trabecular bone and a 1 mm-thick layer of cortical bone. Vertical and 45° oblique static loads were applied at the center of the superstructures. The resulting stresses were monitored photoelastically and recorded photographically. RESULTS With vertical loading, the cylinder implant showed higher stress levels in the cortical bone and trabecular bone than the upper 1/3 TM implant, 1/2 TM implant, and lower 1/3 TM implant. The four groups of TM implants showed lower stress levels in the cortical bone than the cylinder implant under oblique loads. The least favorable stress concentration in cortical bone was observed in the upper 1/3 TM implant under vertical and oblique loads.

CONCLUSIONTM implants of rational conical angle designs seem to be effective in stress distribution. For all designs and load directions, the upper 1/3 TM implant is the most favorable around the crest.

BACKGROUND: The postnatal sexual health of women is crucial in reproductive health, due to lack of sexual knowledge and sexual heath care service as well as conventional idea, the medical staff and postnatal women themselves pay little attention and discussion on the sexual health after childbirth.OBJECTIVE; To investigate the prevalence and types of women's sexual problems after childbirth, identify the factors associated with dyspareunia and investigate the status quo of postnatal sexual health care service. DESIGN: Cross-sectional study and follow-up survey within six months after delivery.SETTING: Department of Reproductive Medicine, Chongqing University of Medical Sciences. PARTICIPANTS: A total of 798 primiparous women delivering a live birth in Department of Obstetrics at the First Affiliated Hospital of Chongqing University of Medical Sciences between November 2000 and July 2001, and 79 husbands who accompanied their wives during the follow-ups were adopted in this study.METHODS: The primiparous women after 6 months of childbirth and husbands conducted routine postnatal follow-ups and were informed of the follow-up content. The interview was used in this cross-sectional study and the questionnaires were finished under the help of health professional. And some advice, consultations and treatments can be given in time. MAIN OUTCOME MEASURES; ①main change of postnatal sexual life;②postnatal sexual problems and related factors. RESULTS: Totally 460 out of 798 primiparous women in accordance with the inclusive and exclusive criterions received follow-up surveys after telephone or letter notification. ①Main change of postnatal sexual life: Of the 460 respondents, 94.74% had resumed sexual activity within six months after delivery. Compared with one year pre-pregnancy, the number of sexual activity decreased obviously within 3-6 months after delivery, and 66.0％ of postnatal women decreased the sexual desire.②Postnatal sexual problems and related factors: Sexual morbidity increased significantly after the childbirth: In the first three months after delivery, 70.6％ of women experienced sexual problem(s), declining to 55.6％ during the 4th-6th months, and reduced to 34.2％ at the 6th month, but not reaching pre-pregnancy levels of 7.17％. The sexual problems of women after delivery included dyspareunia, vaginal dryness, orgasm disorder and vaginal relaxation, etc.4. And dyspareunia was the most common type. Between the 4th and 6th month after delivery, dyspareunia was significantly associated with the effect of traditional sexual ideas, experience of dyspareunia before pregnancy and current breastfeeding (P ＜ 0.05), while the association of dyspareunia with delivery mode was not significant.③Sexual care service and sexual counseling after delivery: Only 20.8％ of women received information about sexual health from health care personnel within 42 days after delivery, and consultation rate of sexual intercourse problems was 8.0％.④Husbands' comprehension of postnatal problems in women: Only 59.2％ of partners whose wives had postnatal sexual problem(s) knew that their wives had ever experienced sexual problem(s) and 8.1％ of partners had sought medical help. CONCLUSION; Sexual health problems are very common in women after childbirth, taking up for 70.6％. And the quality of postnatal sexual health is unrelated with delivery mode, but postnatal health care service are often overlooked, additionally lack of professional counseling and treatment. The current practices of encouraging the husband's supports after the childbirth may well influence the prevention and treatment of postnatal sexual problems in women.

Objective To compare the mid- and long-term results of tricuspid valve (TV) repair with or without an annuloplasty ring. Methods Two hundred seventy-seven patients underwent TV repair at our division (Sep. 2001 to Sep. 2008) ,of which 203 had, predominantly, a De Vega or Kay procedure (non-ring group) and 74had an annuloplasty with an artificial ring (ring group). TV pathology mainly was functional (secondary) and several with rheumatic leaflets involvement. Concomitant procedures consisted of mitral valve surgery in all patients,aortic valve surgery in 81 ,and coronary bypass in 19. Clinical and echocardiographic data followed for 1.5 to 3.5years were obtained. Results Postoperationally,the mid-term(1.5 years) follow-up was 100% completed and the long-term follow-up for 3. 5 years was 89. 9%. The recurrence of TV regurgitation (TR) of moderate and lower degree was not significantly different(χ2 = 1.3128, P= 0.26) in the 1.5 years follow-up between the two group,whereas the recurrence of TR of moderate to severity degree was significantly less in the ring group (χ2 =5. 8159,P =0.023).In the long term follow up,the TR in the ring group (25%) was significantly lower than that of 15% in the non-ring group (χ2 = 4. 9328, P = 0.036) . There are higher proportion of patients developing to moderate TR in the non ring group(34%) than in the ring group (10%) (χ2 =7. 9120,P =0.005). The TR developed fast in the ring group,increasing from 18% at 1.5 years follow up to 10% at 3.5 years follow up (χ2 = 2. 1327, P = 0.016),whereas it was relatively stable in the non-ring group,with 7% at 1.5 year follow up and 10% at 3.5 year follow up. Conclusions Placement of an annuloplasty ring in patients undergoing TV repair could remarkably improved the mid and long terum outcome. In clinic practice, we should be more positive to the functional TR and prefer to the procedure with annuloplasty ring.

The method of acupuncture combined with rehabilitation training in the treatment of shoulder hand syndrome after stroke is reliablet, quick, with simple operation and less adverse reactions. Among them, characteristic acupuncture could focus on the targeted points with obvious effect than ordinary acupuncture, and the combination with rehabilitation training could greatly improve the curative effect. However, there still exist some problems in the current research, such as the difficulty of conducting blind clinical trials of acupuncture therapy; the lack of follow-up data in the evaluation of curative effect, the uncertainty of long-term curative effect; the small sample size of clinical research, etc., so multi-centered and large sample RCT research are still needed.

Objective To photoelastically investigate the difference in load distribution of Tension More (TM) implants with different conical angle designs. Methods The following five groups of implants of different conical angles were designed: cylinder implant, upper 1/3 TM implant (taper length of 3 mm); 1/2 TM implant (taper length of 5 mm); lower 1/3 TM implant (taper length of 7 mm); and bottom TM implant (taper length of 10 mm). The implants were centrally located in individually photoelastic models consisting of a simulated trabecular bone and a 1 mm-thick layer of cortical bone. Vertical and 45° oblique static loads were applied at the center of the superstructures. The resulting stresses were monitored photoelastically and recorded photographically. Results With vertical loading, the cylinder implant showed higher stress levels in the cortical bone and trabecular bone than the upper 1/3 TM implant, 1/2 TM implant, and lower 1/3 TM implant. The four groups of TM implants showed lower stress levels in the cortical bone than the cylinder implant under oblique loads. The least favorable stress concentration in cortical bone was observed in the upper 1/3 TM implant under vertical and oblique loads. Conclusion TM implants of rational conical angle designs seem to be effective in stress distribution. For all designs and load directions, the upper 1/3 TM implant is the most favorable around the crest.

Objective:To investigate the prevalence of pre-diabetes mellitus (PDM) and the impact of occupation-related factors on PDM, among workers from a steel company in Tangshan city, Hebei province.Methods:Clustering sampling method was used to select a steel company and to carry out occupational health-related physical checkup programs for eligible workers who had working in this company for longer than one year. The study began in February and ended up in June, 2017. Workers who were with FPG level as ≤6.9 mmol/L, and free from diabetes, were selected as the subjects for this study. Questionnaires were used and physical examinations and FPG testing conducted.Results:The total number of subjects in this study was 4 173, of which 2 648 appeared as pre-diabetic, with the prevalence rate as 63.4 %. Increase of the PDM prevalence was in parallel with the length of service, among the workers. The risk for the pre-diabetes in those who worked more than 8 hours per day was 1.696 times higher than those who worked less than or equal to 8 h/d (95 %CI:1.517-1.937). Compared with those workers without exposures to heat, noise or carbon monoxides, the proportion of pre-diabetes appeared higher in workers exposed to heat, noise or CO with OR=1.782 (95 %CI: 1.205-2.636), 1.815 (95 %CI: 1.209-2.794) and 1.653 (95 %CI: 1.158-2.361), respectively. Risks for those who were exposed to heat or noise were higher than those who were free from exposure to any occupational hazards ( OR=2.098, 95 %CI: 1.296-3.397). Prevalence rates of pre-diabetes in those who were exposed to heat, noise or CO, were higher than that those who were not. Conclusion:Working hours and exposures to heat, noise or CO appeared as influential factors on PDM.

Objective:To investigate the effect of occupational factor exposures on carotid atherosclerosis (CAS) in steel workers.Methods:A frequency matched case-control study was conducted by age and factory proportion. A total of 1 033 workers with carotid atherosclerosis diagnosed by ultrasonography examination from February to June 2017 were selected as case group, and 1 033 workers without carotid atherosclerosis indicated by physical examination at the same time were selected as control group. The basic information of the workers, such as diet pattern, lifestyle, serum biochemical index and occupation history, were collected. The effects of occupational hazards on carotid atherosclerosis were analyzed by univariate and multivariate logistic regression analyses. The combined effects of various occupational hazards on carotid atherosclerosis were evaluated by environmental risk score (ERS).Results:High temperature, noise, occupational stress and night shift days increased the risk of CAS. With the increase of cumulative high temperature and noise exposure, occupational stress and night shift days, the risk of CAS increased (trend text: χ2=37.53, P<0.01; χ2=16.98, P<0.01; χ2=13.93, P<0.01; χ2=5.59, P<0.05). After adjustment of covariates, compared with P 20 group, the risk of carotid artery in P 40, P 60, P 80 and P 100 groups were as follows: high temperature 1.61 (1.19-2.18), 1.69 (1.25-2.30), 1.84 (1.36-2.49), 2.43 (1.77-3.34); noise 1.70 (1.15-2.52), 1.68 (1.20-2.35), 1.80 (1.34-2.42), 2.23 (1.53-3.26); occupational stress 1.39 (1.04- 1.86), 1.41 (1.06-1.89), 1.45(1.09-1.95), 1.48 (1.10-1.98); night shift days 1.58 (1.08-2.33), 1.66 (1.12-2.47), 1.55 (1.04-2.31), 1.76 (1.17-2.64). The results of the environmental risk score showed that the risk of carotid atherosclerosis increased with the increase of ERS (ERS trend text χ2=51.61, P<0.01); RCS results showed that there was a linear relationship between ERS and CAS in steel workers( P<0.01). Linear dose-response relationship existed between ERS and CAS (nonlinear test P>0.05). Conclusions:High temperature, noise, occupational stress and night shift days were related to carotid atherosclerosis. Linear dose-response relationship existed between ERS and CAS in steel workers.

OBJECTIVETo evaluate the colorectal cancer (CRC) prevention effect of metformin in comparison with that of other T2DM medications from a Markov model perspective.

METHODSLiterature concerning CRC morbidity of T2DM patients with metformin or other diabetes medications treatment was reviewed in PubMed and Cochrane Library database from September 2010 to December 2016.

INCLUSION CRITERIA(1)enrolled population was adult patients with T2DM but without CRC; (2) any of the parameters applied in our model was reported; (3) randomized clinical trials (RCTs), quasi-randomized trials, prospective or retrospective cohort studies. With CRC morbidity as endpoint, parameters were extracted to construct Markov model to assess CRC morbidity and cumulative tumor-free survival in each group over 11 years' follow-up period. Finally, Monte Carlo analysis was performed to evaluate the influence of parameter instability on the model.

RESULTSSeven literatures were recruited and 10 000 patients were virtually allocated for each arm. In contrast with non-metformin group, T2DM patients treated with metformin had a lower rate of CRC(1.670% vs. 2.146%, P=0.016). Moreover, cumulative tumor-free survival of metformin group was, slightly but significantly, better than that of non-metformin group (10.908 years vs. 10.882 years, P=0.000).

CONCLUSIONST2DM patients treated with metformin have a lower morbidity of CRC and a better cumulative tumor-free survival than those of non-metformin group. Large scale RCTs are needed to illustrate the role of metformin in the prevention of CRC.

OBJECTIVE: To explore the effect of occupational high temperature exposure on type 2 diabetes( T2 DM) in male steel workers. METHODS: A cluster random sampling method was used to select 684 male steel workers,who exposed to occupational high temperature in a steel enterprise in Tangshan City,as the high temperature group,and 1 153 male steel workers without occupational high temperature exposure as the control group. The high temperature level of workers in these two groups was measured. The cumulative exposure( CE) of high temperature was calculated,and occupational health exam was performed. The multivariate logistic regression analysis and restricted cubic splines were used to analyze the relationship between high temperature CE and T2 DM. RESULTS: The prevalence of T2 DM in high-temperature group was higher than that in the control group( 13. 0% vs 7. 9%,P < 0. 05). The multivariate logistic regression analysis results showed that the risk of T2 DM in the high temperature group was higher than that in the control group after adjusting for age,body mass index,smoking,drinking,physical exercise and parents with diabetes( P < 0. 05). The 95% confidence interval was 1. 65( 1. 17-2. 33). Restricted cubic spline analysis showed that the high temperature CE was correlated with the prevalence of T2 DM in workers( P < 0. 01) and showed a linear correlation( nonlinearity test,P > 0. 05). CONCLUSION: Occupational high temperature exposure is associated with the occurrence of T2 DM in male steel workers. The male steel workers with high temperature CE show high prevalence of T2 DM risk.