Objective To observe the changes of calcitonin gene-related peptide(CGRP) -immunoreactive positive nerve fibers innervation in bone tissue of femoral heads during the pathological process of early steroid-induced avascular necrosis of the femoral head (SANFH), and explore its significance.Methpathological group of SANFH was induced.Immunohistochemical technique was used and the changes of CGRP-immunoreactive positive nerve fibers innervation in weight bearing area of the femoral heads during the pathological process of early SANFH were observed.Result The number of CGRP-immunoreactive nerves increased first and then decreased ( Peaked at 6 weeks, 10.28 ± 0.66 ), but it was more than that ofnormal control group.There was significant difference between two groups ( P ＜ 0.01 ).Conclusion There were changes in the distribution of CGRP-immunoreactive positive nerves fiber during the process of bone repair after SANFH.CGRP-immunoreactive positive nerves fiber might take part in the process of bone repair in SANFH.

Chemotherapeutic drugs are the mainstay of treatment on mid-advanced tumors. In recent years, more and more studies have shown that chemotherapeutic drugs also have immunomodulatory effects. Some chemotherapeutic drugs can enhance anti-tumor immunity by inducing tumor cell immunogenic cell death or performing "immunogenic modulation". In addition, chemotherapeutic drugs can also act on immune cells and even the intestinal flora. A number of clinical trials of chemotherapy combined with immune checkpoint inhibitors are currently underway. This article focuses on the immunomodulatory effect of chemotherapeutic drugs, as well as the potential of chemotherapy combined with ICI on cancer, to provide guidance for the clinical application of chemotherapeutic drugs.

Objective To explore the expression levels of YBX1 and FOXA1 in gastric cancer tissues and determine their relationship with prognosis. Methods A total of 131 patients with gastric cancer were studied, and the corresponding adjacent normal tissues of each patient were selected as the control. qRT-PCR and immunohistochemistry were used to detect the expression levels of YBX1 and FOXA1 in cancer tissues and adjacent tissues. The correlation between YBX1 and FOXA1 protein expression in gastric cancer tissues was expressed by Crammer's V coefficient, and the correlation between YBX1 mRNA and FOXA1 mRNA was analyzed by Pearson method. Kaplan-Meier method was used to analyze the relationship between YBX1, FOXA1 protein expression in gastric cancer tissues and the 5-year overall survival rate of patients. Univariate and multivariate Cox regression analyses were used to analyze the factors affecting the prognosis of patients with gastric cancer. Results Compared with paracancerous tissue, the levels of FOXA1 and YBX1 in cancer tissues were lower and higher, respectively (P < 0.05). A negative correlation was observed between YBX1 mRNA and FOXA1 mRNA in gastric cancer (r=-0.675, P < 0.05). The expression of YBX1 and FOXA1 proteins in gastric cancer tissues was negatively correlated (Crammer's V=-0.497, P < 0.001). The expression of YBX1 and FOXA1 proteins in gastric cancer tissue was related to the degree of differentiation, lymph node metastasis, and TNM staging (P < 0.05). The 5-year survival rate of the YBX1 negative expression group and the FOXA1 positive expression group were higher than those of the YBX1 positive expression group, and the FOXA1 negative expression group both P < 0.05). TNM staging and YBX1 were independent risk factors for death in patients with gastric cancer (P < 0.05), and FOXA1 was a protective factor (P < 0.05). Conclusion YBX1 is highly expressed and FOXA1 is lowly expressed in gastric cancer tissues; they are closely related to the disease progression and prognosis of patients with gastric cancer.

Background and Objectives: Bronchopulmonary dysplasia (BPD) has major effects in premature infants. Although previous literature has indicated that mesenchymal stem cells (MSCs) can alleviate lung pathology in BPD newborns and improve the survival rate, few research have been done investigating significantly differentially expressed genes in the lungs before and after MSCs therapy. The aim of this study is to identify differentially expressed genes in lung tissues before and after hAD-MSC treatment. Methods: and Results: Human amnion-derived MSCs (hAD-MSCs) were cultured and met the MSCs criteria for cell phenotype and multidirectional differentiation. Then we confirmed the size of hAD-MSCs-EXOs and their expressed markers. An intratracheal drip of living cells showed the strongest effect on NHLI compared to cellular secretions or exosomes, both in terms of ameliorating pulmonary edema and reducing inflammatory cell infiltration. Through gene chip hybridization, PCR, and western blotting, acylaminoacyl-peptide hydrolase (APEH) expression was found to be significantly decreased under hyperoxia, and significantly increased after hAD-MSC treatment. Conclusions The intratracheal transplantation of hAD-MSCs ameliorated NHLI in neonatal rats through APEH.

Purpose: Prostate cancer (PCa) is an epithelial malignancy that originates in the prostate gland and is generally categorized into low, intermediate, and high-risk groups. The primary diagnostic indicator for PCa is the measurement of serum prostate-specific antigen (PSA) values. However, reliance on PSA levels can result in false positives, leading to unnecessary biopsies and an increased risk of invasive injuries. Therefore, it is imperative to develop an efficient and accurate method for PCa risk stratification. Many recent studies on PCa risk stratification based on clinical data have employed a binary classification, distinguishing between low to intermediate and high risk. In this paper, we propose a novel machine learning (ML) approach utilizing a stacking learning strategy for predicting the tripartite risk stratification of PCa. Methods: Clinical records, featuring attributes selected using the lasso method, were utilized with 5 ML classifiers. The outputs of these classifiers underwent transformation by various nonlinear transformers and were then concatenated with the lasso-selected features, resulting in a set of new features. A stacking learning strategy, integrating different ML classifiers, was developed based on these new features. Results: Our proposed approach demonstrated superior performance, achieving an accuracy of 0.83 and an area under the receiver operating characteristic curve value of 0.88 in a dataset comprising 197 PCa patients with 42 clinical characteristics. Conclusions This study aimed to improve clinicians’ ability to rapidly assess PCa risk stratification while reducing the burden on patients. This was achieved by using artificial intelligence-related technologies as an auxiliary method for diagnosing PCa.

Objective: To investigate the clinical value of laparoscopic peritoneal dialysis catheter implantation in peritoneal chemotherapy for gastric cancer with peritoneal metastasis. Methods: From January 2019 to June 2019, the clinical data of 6 patients diagnosed as gastric cancer with peritoneal metastasis were retrospectively analyzed in the Gastrointestinal Surgery Department of Ruijin Hospital Affiliated to Shanghai Jiaotong University School of Medicine. Five were male and 1 was female. The median age was 69.5 (28-77) years. The median body mass index (BMI) was 22.8 (19.6-23.5). All procedures were performed under general anesthesia with endotracheal intubation. The patient′s body position and facility layout in the operating room were consistent with those of laparoscopic gastrectomy. The operator′s position: the main surgeon was located on the right side of the patient, the first assistant stood on the left side of the patient, and the scopist stood between the patient′s legs. Surgical procedure: (1) trocar location: three abdominal trocars was adopted, with one 12 mm umbilical port for the 30° laparoscope (point A). Location of the other two trocars was dependent on the procedure of exploration or biopsy as well as the two polyester cuff position of the peritoneal dialysis catheter: Usually one 5 mm port in the anterior midline 5 cm inferior to the umbilicus point was selected as point B to ensure that the distal end of the catheter could reach the Douglas pouch. The other 5 mm port was located in the right lower quadrant lateral to the umbilicus to establish the subcutaneous tunnel tract, and the proximal cuff was situated 2 cm away from the desired exit site (point C).(2) exploration of the abdominal cavity: a 30° laparoscope was inserted from 12 mm trocar below the umbilicus to explore the entire peritoneal cavity. The uterus and adnexa should be explored additionally for women. Once peritoneal metastasis was investigated and identified, primary laparoscopic peritoneal dialysis catheter implantation was performed so as to facilitate subsequent peritoneal chemotherapy. Ascites were collected for cytology in patients with ascites. (3) peritoneal dialysis catheter placement: the peritoneal dialysis catheter was introduced into the abdominal cavity from point A. Under the direct vision of laparoscopy, 2-0 absorbable ligature was reserved at the expected fixation point of the proximal cuff (point B) for the final knot closure. Non-traumatic graspers were used to pull the distal cuff of peritoneal dialysis catheter out of the abdominal cavity through point B. The 5-mm trocar was removed simultaneously, and the distal cuff was fixed between bilateral rectus sheaths at the anterior midline port site preperitoneally. To prevent subsequent ascites and chemotherapy fluid extravasation, the reserved crocheted wire was knotted. From point C the subcutaneous tunnel tract was created before the peritoneal steath towards the port site lateral to the umbilicus. Satisfactory catheter irrigation and outflow were then confirmed. Chemotherapy regimen after peritoneal dialysis catheterization: all patients began intraperitoneal chemotherapy on the second day after surgery. On the 1st and 8th day of each 3-weeks cycle, paclitaxel (20 mg/m²) was administered through peritoneal dialysis catheter, and paclitaxel (50 mg/m²) was injected intravenously. Meanwhile, S-1 was orally administered twice daily at a dose of 80 mg·m^-2·d^-1 for 14 consecutive days followed by 7-days rest. To observe the patients′ intraoperative and postoperative conditions. Results: All the procedures were performed successfully without intraoperative complications or conversion to laparotomy. No 30 day postoperative complications were observed. The median operative time was 33.5 (23-38) min. The median time to first flatus was 1(1-2) days, and the median postoperative hospital stay was 3 (3-4) days, without short-term complications within 30 days postoperatively. The last follow-up was up to July 10, 2019, and the patients were followed for 4(1-6) months. No ascites extravasation was observed and no death occurred in the 6 patients. There was no catheter obstruction or peritoneal fluid extravasation during and after chemotherapy. Conclusion Laparoscopic peritoneal dialysis catheter implantation was safe and feasible for patients with peritoneal metastasis of gastric cancer. The abdominal exploration, tumor staging and the abdominal chemotherapy device implantation can be completed simultaneously, which could simplify the surgical approach, improve the quality of life for patients and further propose a new direction for the development of abdominal chemotherapy.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.