1.Therapeutic effects of fenestration in treatment of dentigerous cyst in mixed dentition stage
Sun, WANG ; Hui-zhen, CAO ; Xi-ping, FENG
Journal of Shanghai Jiaotong University(Medical Science) 2009;29(6):716-718
Objective To observe the therapeutic effects of fenestration in the treatment of dentigerous cyst in mixed dentition stage. Methods From 2004 to 2007, 8 cases of dentigerous cyst in mixed dentition stage were treated, among whom 3 were boys and 5 were girls with ages between 7 and 12 years old. The dentigerous cysts of 2 cases were in superior maxillary bone and the other 6 cases were in inferior maxillary bone. Each of 5 cases had one tooth in dentigerous cyst cavity, and each of the other 3 had 3 teeth in dentigerous cyst cavity. All patients received fenestration under local anesthesia. The patients were followed up for 18 months after fenestration, and the soft tissue healing, facial malformation, permanent teeth eruption and bone tissue healing were observed. Results It was found during follow up that cyst cavity disappeared in all the patients and all had normal facial morphology with no maxillary bone malformation. In five cases, permanent teeth erupted totally and dental occlusion kept normal. In one case, 2/3 of permanent teeth erupted and dental occlusion kept almost normal. While in the other two cases, permanent teeth were to erupt. It was revealed by X ray examinations that the shadow of maxillary bone density decrease disappeared in all the patients. Conclusion Fenestration can keep the teeth and bone in the treatment of dentigerous cyst in the mixed dentition stage.
2.A meta-analysis of proximal femoral nail anti-rotation, dynamic hip screw and total hip arthroplasty for intertrochanteric fractures in the elderly
Yongjie QIAO ; Xuefei CAO ; Lvdan ZHANG ; Qinpeng WANG ; Ping ZHEN
Chinese Journal of Tissue Engineering Research 2015;(31):5057-5064
BACKGROUND:The methods to treat intertrochanteric fracture are controversial. A large number of clinical studies concern the therapeutic effects of several popular methods to repair intertrochanteric fracture, but these results lack of independence, and may have bias that cannot be measured in the variable and observational studies. Thus, relevant studies have been limited. OBJECTIVE:To compare the repair effects of proximal femoral nail anti-rotation, dynamic hip screw and total hip arthroplasty on intertrochanteric fracture in aged patients by meta-analysis. METHODS: Four electronic databases were searched, including Cochrane library, PubMed, Web of Science and Chinese BioMedical Literature Database, to colect al randomized controled trials concerning the treatment of intertrochanteric fractures in the elderly with proximal femoral nail anti-rotation, dynamic hip screw and total hip arthroplasty. Using meta-analysis of evidence-based medicine, X-ray exposure time, postoperative complication rate, postoperative bed time, postoperative wound infection rate, Harris hip scores, mean operation time, intraoperative blood loss, length of hospital stays and length of the incision were compared and evaluated. Standard and methodology quality of the trials were criticaly assessed and relative data were extracted. This study used the Review Manager 5.0 software provided by Cochrane colaboration network. RESULTS AND CONCLUSION:Twelve randomized controled trials with 1 454 patients were included. Significant differences in mean operation time, intraoperative blood loss, X-ray exposure time, postoperative complication rate, and postoperative bed time were detected between the proximal femoral nail anti-rotation and dynamic hip screw groups (P < 0.05). Significant differences in length of hospital stays, postoperative complication rate, and postoperative bed time were observed between the proximal femoral nail anti-rotation and total hip arthroplasty groups (P < 0.05). Significant differences in postoperative complication rate, postoperative bed time, and Harris hip scores were detectable between the dynamic hip screw and total hip arthroplasty groups (P < 0.05). These data confirm that proximal femoral nail anti-rotation was apparently better than dynamic hip screw and total hip arthroplasty in operation time, intraoperative blood loss, length of hospital stays, postoperative complication rate, and postoperative bed time. Dynamic hip screw was better than proximal femoral nail anti-rotation in X-ray exposure time. Total hip arthroplasty was better than dynamic hip screw and proximal femoral nail anti-rotation in length of hospital stays, postoperative complication rate and postoperative bed time.
3.3D printing of bone tissue engineering scaffolds
Xuefei CAO ; Pengjie SONG ; Yongjie QIAO ; Ping ZHEN
Chinese Journal of Tissue Engineering Research 2015;(25):4076-4080
BACKGROUND:Although bone tissue engineering scaffolds made of traditional methods have made certain achievements, the three-dimensional structure, mechanical strength and personalized property of the scaffolds are unsatisfied. 3D printing technology is expected to change these shortcomings. OBJECTIVE:To review the 3D printing of bone tissue engineering scaffolds and to prospect the optimization of the scaffolds. METHODS:A computer-based search of PubMed and Google academic database was performed for articles addressing the 3D printing of bone tissue engineering scaffolds published from 2008 to 2015. Articles concerning the structure design and materials of bone tissue engineering scaffolds and different 3D printing technologies for scaffold preparation were included, and repetitive and old articles were excluded. Final y, 37 articles were summarized. RESULTS AND CONCLUSION:Currently, 3D printing technologies used for preparation of bone tissue engineering scaffolds include melt laminated molding, stereolithography, selective laser sintering and 3DP technology. 3D printing technologies have unique advantages in mechanics, structure and personalized aspects, but there are stil many problems to be solved, such as raw materials, insufficiency of different 3D technologies, and improvement of 3D printer. Under the multi-disciplinary co-operation, 3D printing technology is expected to prepare suitable bone tissue engineering scaffolds and bring benefit to the mankind.
4.Structural properties influence the osteoinduction of calcium phosphate ceramics
Lei MENG ; Ping ZHEN ; Xiaoyan LIANG ; Xuefei CAO
Chinese Journal of Tissue Engineering Research 2015;(43):7010-7016
BACKGROUND:Currently, the mechanism by which calcium phosphate ceramics induces osteogenesis is not fuly understood, and many scholars have tried to expound the mechanism from the perspective of the structural properties. OBJECTIVE:To review how the structural properties of calcium phosphate ceramics affect their osteoinductive activity. METHODS: The PubMed database and Google academic database (1997-01/2015-03) were searched to retrieve the related articles about the structural properties of calcium phosphate ceramics affecting their osteoinductive activity. After the articles with outdated reviews or repetitive contents were ruled out, 60 articles were suitable for further analysis and review. RESULTS AND CONCLUSION:The structural properties of calcium phosphate ceramics are displayed by macrostructure, such as macropores, holes, pipes and space between particles, and microstructure, such as micropore, particle size, surface roughness, specific surface area. Each parameter of the structural properties affects the bioactivities of calcium phosphate ceramics in some way, which renders their abilities of inducing osteogenesis to arise from nothing or change from weakly to strongly. Apart from structure design, physical and chemical properties of calcium phosphate ceramics wil also affect its biological activityin vivo. Therefore, the physicochemical properties of calcium phosphate ceramics should be considered in the structure design in order to achieve an optimal osteoinductive activity.
5.Treatment of mandible fractures: A retrospective clinical analysis of 148 cases
Zhen YANG ; Gang CAO ; Ping XIAO ; Baiquan SHOU ; Jieshou LI
Journal of Medical Postgraduates 2003;0(04):-
Objective: To search for a best method for management mandible fractures by evaluating the effects of different treatments.Methods: We retrospectively analyzed 148 cases of mandible fractures treated in our department from January 1996 to June 2007.Results: Among the total number,134 cases were restored to normal occlusion,while 6 cases experienced local occlusive disfunction and 8 malocclusion.The effect of treatment was correlated with the types of fracture and methods of diaplasis.Conclusion: Mandible fractures should be treated with a new concept of combined and sequential multidisciplinary methods.Sound diaplasis followed by reliable fixation can produce a satisfying curative effect.At present,intermaxillary elastic traction with internal titanium plate fixation is the most effective method for the management of mandible fractures.
6.Maxillary and/or mandible fractures: Retrospective clinical analysis of 39 cases
Ping XIAO ; Zhen YANG ; Gang CAO ; Ying YIN ; Baiquan SHOU
Journal of Medical Postgraduates 2003;0(09):-
Objective: Maxillary and mandible fractures are severe intermaxillary injuries,frequently involving other vital organs,and usually difficult to be treated.This study discusses the treatment of maxillary and mandible fractures.Methods: We retrospectively analyzed the clinical data of 39 cases of maxillary fractures and/or mandible fractures.Results: Of the 39 cases,34 males,5 females and 84.64% aged from 20 to 50,87.17% were caused by vehicle accidents,and 94.87% were accompanied by injuries of other parts of the body.After surgical treatment,78.95% gained normal or basically normal ocular esthetic results and 68% achieved good or improved facial esthetic results.Conclusion: The results of treatment are closely related with the type and severity of fracture and the time and plan of treatment.Preoperative CT scanning and facial profile three-dimensional reconstruction are necessitated for a thorough evaluation of the fractures and an analysis of the causes and extent of facial and ocular changes.The best treatment plan for maxillary and/or mandible fractures would include anatomic reduction by surgery,intermaxillary elastic traction and rigid internal fixation with the Ti plate.
7.Research on immune-modulation effects and its mechanisms of Guizhi Fuling capsule and its active ingredient combination.
Yi-ping JIANG ; Xiu WU ; Na LI ; Liang CAO ; Gang DING ; Zhen-zhong WANG ; Wei XIAO
China Journal of Chinese Materia Medica 2015;40(15):3068-3071
The effects of Guizhi Fuling capsule and its active ingredient combination within different concentration on SPL proliferate were observed by MTT method. The ratio of CD80/86, CD3CD25 and CD3CD69 was used to evaluate cell activation effects of Guizhi Fuling capsule and its active ingredient combination by FCM. Guizhi Fuling capsule with concentration of 400 mg · L(-1)can promote spleen lymphocyte proliferation, as well as the active ingredient combination, which showed the obvious dose-effect relationship. Compared with control group, the difference has statistical significance (P≤0.01). The result of FCM showed that Guizhi Fuling capsule and its active ingredient combination can promote CD80 and CD86 expression on spleen lymphocyte, and also can increase CD25 and CD69 ratio between spleen CD3+ cells. Compared with control group, the difference has statistical significance (P≤0.01). Thus, Guizhi Fuling capsule and its active ingredient combination may have immune-modulate effects, and the mechanism may have a close relationship with the lymphocyte activation.
Animals
;
Capsules
;
Drugs, Chinese Herbal
;
analysis
;
pharmacology
;
Immunologic Factors
;
pharmacology
;
Lymphocyte Activation
;
drug effects
;
Male
;
Mice
;
Mice, Inbred BALB C
;
T-Lymphocytes
;
drug effects
;
immunology
8.Functional bone tissue engineering scaffold used to repair tuberculosis bone defect
Xiaohu SUN ; Jing YUAN ; Yu ZHANG ; Yongjie QIAO ; Xuefei CAO ; Lei MENG ; Zhanwang GAO ; Ping ZHEN
Chinese Journal of Tissue Engineering Research 2016;20(30):4539-4546
BACKGROUND:Repairing tuberculosis bone defect has become a research focus with the development of anti-tuberculosis functional bone tissue engineering scaffold. OBJECTIVE:To evaluate the preparation, drug release performance and osteogenic properties of the anti-tuberculosis functional bone tissue engineering scaffold. METHODS:PubMed, Chinese Journal Ful-text Database, Wanfang databases were searched by computer for articles addressing functional bone tissue engineering scaffold for repair of tuberculosis bone defect. The keywords were“bone tissue engineering scaffold;tuberculosis;bone defect”in English and Chinese. RESULTS AND CONCLUSION:The anti-tuberculosis functional bone tissue engineering scaffold has good drug delivery, biocompatibility, osteogenic properties and anti-tuberculosis properties. As a good choice to avert bone defect relapse, the scaffold enables a long and stable drug release into bone defects to enhance the therapeutic efficacy of anti-tuberculosis drugs topical y. Given the technical deficiencies, we can only combine two drugs with the anti-tuberculosis bone tissue engineering scaffold, although the combined use of three or four anti-tuberculosis drugs is preferred. Additional y, a complete course of anti-tuberculosis treatment often lasts for 6-12 months, which cannot be achieved by the existing anti-tuberculosis bone tissue engineering scaffold. Up to now, the effect of this scaffold has not yet been confirmed in animal models, although how to prepare this scaffold has been reported.
9.Retrospective clinical analysis of 56 cases of condylar fractures
Zhen YANG ; Gang CAO ; Ping XIAO ; Ying YIN ; Baiquan SHOU ; Jieshou LI
Journal of Medical Postgraduates 2003;0(12):-
Objective: To evaluate different treatment methods for condylar fractures.Methods: Retrospective analyses were made of the clinical data of 56 cases of condylar fractures treated from January 1996 to December 2007.Results: Condylar fractures occurred mostly in males(82.14%),and 89.29% of the patients were aged 20-50 years.Traffic accidents accounted for 51.79% and falling 26.79% of the causes,48.21% of the cases accompanied with injuries of other parts of the body,and 89.29% restored to normal occlusion after surgical or non-surgical treatment.Conclusion: The effect of the treatment is related with the type and severity of the fractures,the choice of surgical indications and the standardization of treatment.A thorough evaluation of the fractures is necessitated.The best protocol for condylar fractures should be intermaxillary elastic traction,surgical anatomic reduction plus rigid internal fixation by Ti plate.
10.Effect of electroacupuncture on the learning and memory abilities in type 2 diabetic model rats with cognitive impairment
Jiang-Peng CAO ; Ai-Hong YUAN ; Jun YANG ; Xiao-Ge SONG ; Bi-Xiang ZHA ; Zhen LIU ; Yan-Ping YANG
Journal of Acupuncture and Tuina Science 2020;18(1):1-9
Objective: To observe the effects of electroacupuncture (EA) on the protein and gene expressions of Bax, Caspase-3 and Bcl-2 in cerebral cortex of type 2 diabetic rats with cognitive impairment (CI), and to explore the mechanism of EA in improving the learning and memory abilities. Methods: A total of 100 Sprague-Dawley (SD) rats were divided into a normal group (n=10) and a model group (n=90) by random number table method. Rats in the model group were intraperitoneally injected with a small dose of streptozotocin (STZ) to establish the type 2 diabetic models, after being fed with high-fat and high-sugar diet for 1 month. Twenty CI rats were selected from the 50 successful model rats by the Morris water maze (MWM) test and randomly divided into a model group and an EA group according to the blood glucose level and MWM data (n=10). Rats in the EA group received acupuncture at Zusanli (ST 36), Neiting (ST 44) and Yishu (Extra), of which Zusanli (ST 36) and Neiting (ST 44) were stimulated by EA apparatus, 20 min/time, once a day for 6 d a week and 4 consecutive weeks. The rats in the model and the normal groups were fixed without treatment. After 4-week treatment, the random blood glucose level of the rats was measured; the learning and memory abilities of rats were measured by MWM; terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling (TUNEL) assay was used to detect apoptotic cells; Western blot (WB) and real-time quantitative polymerase chain reaction (RT-qPCR) were used to detect the protein and gene expressions of Bax, Caspase-3 and Bcl-2 in cerebral cortex. Results: After modeling, the random blood glucose level and the escape latency tested by MWM were significantly increased, and the number of crossing the platform tested by the MWM was decreased in the EA and model groups, and were significantly different from those in the normal group (P<0.05 or P<0.01), while the differences between the model group and the EA group were not statistically significant (all P>0.05). After 4-week treatment, the random glucose level and the escape latency tested by MWM were significantly increased (both P<0.05), and the number of crossing the original platform tested by the MWM was significantly reduced (P<0.01), the protein and gene expressions of Bax and Caspase-3 were significantly increased (all P<0.001), the protein and gene expressions of Bcl-2 were significantly reduced (both P<0.001), and the number of neuron apoptosis was significantly increased (P<0.001) in the model group than in the normal group; the random blood glucose level was significantly reduced (P<0.05), the escape latency tested by MWM was significantly shortened (P<0.05), and the number of crossing the original platform tested by MWM was significantly increased (P<0.05), the protein and gene expressions of Bax and Caspase-3 were significantly reduced (all P<0.001), the protein and gene expressions of Bcl-2 were significantly increased (both P<0.001), and the number of neuron apoptosis was significantly reduced (P<0.001) in the EA group than in the model group. Conclusion: EA can improve the learning and memory damages induced by type 2 diabetic model rats with CI; the action mechanism may be achieved via anti-apoptosis.