Cardiomyopathy, Dilated ; diagnosis ; therapy ; Europe ; Humans ; United States

BACKGROUND: Prevention of implant from inflammation was an effective method to reduce expulsion rate of stainless steel micro-screw implant, and develop new type of antibiotic material.OBJECTIVE: To evaluate the cytotoxicity of a new type of antibiotic stainless steels.METHODS: Metal test samples (antibiotic stainless steel, medical stainless steel, and medial pure titanium) were made into rectangular solids with length of 15 mm × 10 mm × 3 mm. Samples were cleaned with high temperature and high pressure. Alloy leaching liquor was prepared with DMEM culture media according to the ratio betwean surface area and volume of culture solution (3 cm~2/mL). The leaching liquor was maintained in incubator at 37 ℃ for 96 hours, and then degerming was performed using microporous membrane. 6.4% phenol was added, which was considered as the positive control group, and DMEM culture media was considered as the blank control group. Growth of MG63 cells was observed under inverted phase contrast microscope;absorbanca of cells cultured for 24, 48, 72, 96, and 120 hours was detected using MTT test; cytotoxicity of antibiotic stainless steels was evaluated.RESULTS AND CONCLUSION: ① At 24 hours after culture, calls in the positive control group was abnormal; while, cells in other groups were well adherent-grew. ② After 48 hours of culture, with the culture time increased,cytotoxicity was detected out in the positive control group; cells in other groups and blank control groups were normal and grew well. Afew of cells in stainless steels group showed karyopyknosis. ③ The absorbance was the highest of medical pure titanium, and then of antibiotic stainless steel and of medical stainless steel, while there was no significant difference between the three materials. ④ The level of cytotoxicity was grade 0. The results suggested that the antibiotic stainless steel which had the same cytotoxicity grade as medical stainless steel and pure titanium was in line with the requirement of its clinical application.

Atherosclerosis ; Humans ; Urotensins

Cardiomyopathy, Hypertrophic ; diagnosis ; therapy ; Consensus ; Humans

Objective To identify the inclusion compound of ginsenoside Rh2 with hydroxylpropyl-?-cyclodextrin (HP-?-CD) in aqueous solution, and to investigate the change of thermodynamic parameters during the inclusion process. Methods The measurements of the inclusion mechanism, inclusion molar ratio of the host and guest molecules, and change of thermodynamic parameters were carried out by the following methods separately; thin layer chromatography (TLC), differential scanning calorimetry (OSC), infrared (IR) spectrometry, phase solubility method, and thermodynamic method, respectively. Results That all the phase solubility diagrams showed a typical AL-type in various temperatures and suggested the formation of a soluble complex of 1∶1 molar ratio. TLC and IR Spectroscopy confirmed that the significant interaction between the host and guest molecules was probably due to the inclusion of aglycone of Rh2 molecule into the hydrophobic cavity of HP-?-CD molecule. The change in the thermodynamic parameters suggested that the inclusion could proceed spontaneously (?G

A total of 152 strains of endophytic fungi were isolated from the barks of Eucommia ulmoides in three regions (Lueyang country, Zunyi country, Cili country). Based on morphological characteristics and analysis of ITS sequences, these strains were identified into 8 genera. Thereinto Phomopsis, Diaporthe and Alternaria were common genera to Eucommia barks from different sites. But the dominant genus was different: Alternaria was the dominant genus in the barks from Cili country, and Phomopsis was the dominant genus from Zunyi country, then Diaporthe was the one from Lueyang country. According to the similarity coefficient, the composition of the endophytic fungi was distinctly different between the barks from three sites. The diversity and species richness in Lueyang country and Cili country were found higher than those in Zunyi country. The evenness of endophytic fungi was 0.936 5 in Lueyang county, which was higher than 0.737 1 or 0.641 0 in Cili county or Zunyi county, respectively. After phylogenic analysis and calculating the genetic distances of typical strains belong to Phomopsis and its perfect stage--Diaporthe, there was very high genetic diversity in the two genera from our study. In conclusion, the community structure and diversity of endophytic fungi were significant different in Eucommia barks from the three habitats.
DNA, Fungal ; genetics ; DNA, Intergenic ; genetics ; Ecosystem ; Endophytes ; classification ; physiology ; Eucommiaceae ; microbiology ; Fungi ; classification ; genetics ; physiology ; Phylogeny ; Plant Bark ; microbiology

BACKGROUND:316L-Cu antibacterial stainless steel is made by adding a certain amount of copper into the stainless steel fol owed by a special heat treatment to uniformly disperse copper-rich precipitates in stainless steel substrate, thereby harvesting the antibacterial properties. OBJECTIVE:To evaluate the antibacterial activity of the Cu ions released from 316L type Cu-bearing antibacterial stainless steels against Porphyromonas gingivalis, thereby providing biomedical evidence for its clinical application. METHODS:The medical 316L stainless steel samples at a surface area to volume ratio of 0.1 cm2/L were soaked in simulated body fluids at 37 ℃ for 1-10 days. A graphite furnace atomic absorption spectrophotometer was employed to detect the amount of Cu release in the simulated body fluids each day and then the rate of Cu release per day could be determined. The antibacterial activities of the steel samples were evaluated by a standard film-covered method under a scanning electron microscope. RESULTS AND CONCLUSION:The daily Cu releasing amount from the 316L-Cu stainless steel within 10 days was significantly higher than that of 316L stainless steel, and al the values remained nearly constant. With time, the sterilizing rate of 316L-Cu stainless steel was gradual y increased, and reached 100%until the 10th hour. Porphyromonas gingivalis showed some morphological changes at 3 hours after treated with 316L-Cu stainless steel, appeared with cleavage at 6 hours, and mostly disintegrated into pieces at 9 hours. The results indicated that the 316L-Cu antibacterial stainless steel showed excel ent antibacterial property against Porphyromonas gingivalis, slowly release Cu irons, and alter the surrounding microenvironment, which is a highly promising biomaterial and has good clinical value.

Arrhythmias, Cardiac ; Brugada Syndrome ; Cardiac Conduction System Disease ; Coma ; etiology ; Electrocardiography ; Female ; Heart Conduction System ; abnormalities ; Humans ; Organophosphate Poisoning ; complications ; diagnosis

Objective To investigate dosimetric advantage of fixed field intensity-modulated radiotherapy (FF-IMRT),volumetric modulated arc therapy (VMAT) and helical tomotherapy (HT) for cervix uteri cancer.Methods CT datasets of ten patients with cervix uteri cancer were enrolled in the study.FF-IMRT,VMAT and HT plans were designed on Eclipse and HT treatment planning system.Plans were optimized with the aim to assess OAR while enforcing highly conformal target coverage.Institutional dose-volume constraints used in cervix uteri cancer were kept the same for three techniques.The different of three plan was play by single factor analysis of variance and compared to two groups by LSD method.Results All FF-IMRT,VMAT and HT resulted in equivalent target coverage but HT had an improved homogeneity index (P =0.000) and conformity index (P =0.000),or PTV of 105％ prescription dose (47.12％,45.83％ and 0.05％,P=0.000) and lowest Dmax dose (54.53 Gy,53.65 Gy,52.69 Gy,P=0.000).Compared with FF-IMRT and VMAT,the bladder V40 and Dmax of HT were lowest (50.01％,46.84％,42.98％,P=0.001 and 54.49 Gy,52.96 Gy,52.78 Gy,P=0.000),with the rectum V40 lowest (54.61％,48.34％,46.78％,P =0.006),the intestine Dmax lowest (54.53 Gy,53.65 Gy,52.66 Gy,P =0.000) and marrow Dmax lowest (54.51 Gy,54.44 Gy,52.13 Gy,P=0.000).But the delivery MU per fraction were highest (1429.20 MU,617.80 MU,7002.04 MU,P =0.000).Conclusions HT technology is feasible for clinical applications in cervical uteri cancer and can be used as a new method to promote.

OBJECTIVETo observe the distribution of constitution types of Chinese medicine (CM) in patients with osteonecrosis of femoral head (ONFH).

METHODSTotally 130 ONFH patients were recruited. Constitution types of CM were identified in all patients. Distribution features of constitution types of CM in ONFH patients were observed. The differences of distribution in gender, age, single or bilateral hips, course of disease, staging, cause, and region were also analyzed.

RESULTSSeventy patients were of complicated constitutions, while 60 patients were of single constitution. Among the 60 single constitution cases, yang-deficiency constitution [18 (13.9%)], damp-heat constitution [10 (7.7%)], blood-stasis constitution [7 (5.4%)], and qi-deficiency constitution [7 (5.4%)] were mainly distributed. Of the complicated constitutions, yang-deficiency dominated constitution occupied the top ratio [30 (23.1%)], followed by blood-stasis dominated constitution [15 (11.5%)], damp-heat dominated constitution [9 (6.9%)]. By putting them together, yang-deficiency constitution occupied the top constitution of CM [48 (36.9%)], followed by blood-stasis constitution [ 22 (16.9%)] and damp-heat constitution [19 (14.6%)]. The aforesaid three constitutions accounted for 68.5% of the total. There were no statistical distribution differences in gender, age, single or bilateral hips, course of disease, staging, or cause.

CONCLUSIONYang-deficiency constitution, damp-heat constitution, and blood-stasis constitution were liable constitutions of CM in ONFH patients.