We report a case of intractable circulatory failure event in a hypertensive patient during laparoscopy hepatectomy and analyze the diagnosis and treatment by multidisciplinary physicians. This case suggests that both surgeons and anesthesiologists should give attention to oral angiotensin II receptor antagonist during the preoperative period to avoid refractory hypotension. In addition, the use of EV1000 hemodynamic monitoring system in intensive care provides more convenience for clinical liquid management.

Background:Surgical treatment of both-column acetabular fractures is challenging because of the complex acetabular fracture patterns and the curved surface of the acetabulum.Seldom study has compared the application of three-dimensional (3D) printing technology and traditional methods of contouring plates intra-operatively for the surgical treatment of both-column acetabular fractures.We presented the use of both 3D printing technology and a virtual simulation in pre-operative planning for both-column acetabular fractures.We hypothesized that 3D printing technology will assist orthopedic surgeons in shortening the surgical time and improving the clinical outcomes.Methods:Forty patients with both-column acetabular fractures were recruited in the randomized prospective case-control study from September 2013 to September 2017 for this prospective study (No.ChiCTR1900028230).We allocated the patients to two groups using block randomization (3D printing group,n =20;conventional method group,n =20).For the 3D printing group,1:1 scaled pelvic models were created using 3D printing,and the plates were pre-contoured according to the pelvic models.The plates for the conventional method group were contoured during the operation without 3D printed pelvic models.The operation time,instrumentation time,time of intra-operative fluoroscopy,blood loss,number of times the approach was performed,blood transfusion,post-operative fracture reduction quality,hip joint function,and complications were recorded and compared between the two groups.Results:The operation and instrumentation times in the 3D printing group were significantly shorter (130.8 ± 29.2 min,t =-7.5,P ＜ 0.001 and 32.1 ± 9.5 min,t =-6.5,P ＜ 0.001,respectively) than those in the conventional method group.The amount of blood loss and blood transfusion in the 3D printing group were significandy lower (500 [400,800] mL,Mann-Whitney U=74.5,P ＜ 0.001 and 0 [0,400] mL,Mann-Whitney U =59.5,P ＜ 0.001,respectively) than those in the conventional method group.The number of the approach performed in the 3D printing group was significantly smaller than that in the conventional method group (pararectus + Kocher-Langenbeck [K-L] approach rate:35％ vs.85％;X2 =10.4,P ＜ 0.05).The time of intra-operative fluoroscopy in the 3D printing group was significantly shorter than that in the conventional method group (4.2 ± 1.8 vs.7.7 ± 2.6 s;t =-5.0,P ＜ 0.001).The post-operative fracture reduction quality in the 3D printing group was significantly better than that in the conventional method group (good reduction rate:80％ vs.30％;X2 =10.1,P ＜ 0.05).The hip joint function (based on the Harris score 1 year after the operation) in the 3D printing group was significantly better than that in the conventional method group (excellengood rate:75％ vs.30％;x2 =8.1,P ＜ 0.05).The complication was similar in both groups (5.0 ％ vs.25 ％;x2=3.1,P =0.182).Conclusions:The use of a pre-operative virtual simulation and 3D printing technology is a more effective method for treating bothcolumn acetabular fractures.This method can shorten the operation and instrumentation times,reduce Mood loss,blood transfusion and the time of intra-operative fluoroscopy,and improve the post-operative fracture reduction quality.

OBJECTIVETo evaluate the feasibility and effectiveness of using 3D printing and computer-assisted surgical simulation in preoperative planning for acetabular fractures.

METHODSA retrospective analysis was performed in 53 patients with pelvic fracture, who underwent surgical treatment between September, 2013 and December, 2015 with complete follow-up data. Among them, 19 patients were treated with CT three-dimensional reconstruction, computer-assisted virtual reset internal fixation, 3D model printing, and personalized surgery simulation before surgery (3D group), and 34 patients underwent routine preoperative examination (conventional group). The intraoperative blood loss, transfusion volume, times of intraoperative X-ray, operation time, Matta score and Merle D' Aubigne & Postel score were recorded in the 2 groups. Preoperative planning and postoperative outcomes in the two groups were compared.

RESULTSAll the operations were completed successfully. In 3D group, significantly less intraoperative blood loss, transfusion volume, fewer times of X-ray, and shortened operation time were recorded compared with those in the conventional group (P<0.05). According to the Matta scores, excellent or good fracture reduction was achieved in 94.7% (18/19) of the patients in 3D group and in 82.4% (28/34) of the patients in conventional group; the rates of excellent and good hip function at the final follow-up were 89.5% (17/19) in the 3D group and 85.3% (29/34) in the conventional group (P>0.05). In the 3D group, the actual internal fixation well matched the preoperative design.

CONCLUSIONS3D printing and computer-assisted surgical simulation for preoperative planning is feasible and accurate for management of acetabular fracture and can effectively improve the operation efficiency.

Objectives: To investigate whether remote ischemic conditioning (RIC) applied to patients with ST-segment elevation myocardial infarction (STEMI) before percutaneous coronary intervention (PCI) could affect circulating miR-208b level or not. Methods:Patients diagnosed with STEMI undergoing PCI from January 2016 to July 2017 were enrolled from the Department of Cardiology, Affiliated Zhongshan Hospital of Dalian University.The patients were randomly allocated to two groups: (1) control group (n=25), PCI alone; (2) RIC group (n=50), PCI combined with RIC (three cycles of 5 min inflation and 5 min deflation of the right lower limb with blood pressure cuff performed before reperfusion). Serum miR-208b was measured before and immediately, at 24 h, and 48 h after PCI with real-time quantitative polymerase chain reaction. Results: The expression of miR-208b was significantly higher immediately post PCI than that before operation in the control group (84.1±9.0 vs 77.8±9.4; P=0.032), while it was significantly lower immediately post PCI than that before operationin RIC group (71.0±9.3 vs 77.4±8.8; P=0.028).miR-208b level was similar before PCI between the control and RIC groups (P=0.874), which was significantly reduced immediately post PCI in RIC group as compared with the control group (P=0.021).The peak value of creatine kinase isoenzyme (CK-MB) in the limb RIC group was significantly lower than that in the control group ([135.2±18.6] U/L vs [167.7±17.2] U/L; P=0.038).The area under the CK-MB curve of the RIC group was significantly smaller than that of the control group ([3 060.7±17.1] U/L vs [3 635.9±15.1] U/L); P=0.047]. The left ventricular ejection fraction (LVEF) in RIC group was significantly higher than that in the control group ([57.8±7.8]% vs [51.9±7.9]%; P=0.003) post PCI. The expression level of serum miR-208b was positively correlated with CK-MB AUC in RIC group (r=0.498, P<0.001). Conclusions: RIC of the lower limb prior to PCI could reduce miR-208b level and improve cardiac functionin STEMI patients.

Animals ; Cell Proliferation ; Chemokine CXCL12 ; metabolism ; Hepatocytes ; cytology ; metabolism ; Male ; Rats ; Rats, Wistar ; Receptors, CXCR4 ; metabolism

OBJECTIVETo evaluate the clinical effect of 3D printing-assisted minimal invasive surgery on pelvic fracture by plate internal fixation through a small incision lateral to the rectus abdominis.

METHODSThis retrospective study was conducted among 50 patients with pelvic fracture undergoing anteromedial plate internal fixation between September, 2013 and June, 2015. Thin-layer computed tomography scan data of the patients were input into Mimics software in DICOM format for 3D editing and virtual surgery before the operation. The pelvic model was created by 3D printing. Simulated operation was performed to design the optimum location of the plate screw, prelflex of the plate, screw length measurement and screwing approach. Diaplasis and internal fixation were performed through the extraperitoneal space with a small incision lateral to the rectus abdominis. Matta standard was employed for diaplasis evaluation, and Majeed assessment was used for function evaluation 6 months after the operation.

RESULTSAccording to Matta standard, excellent and good diaplases were achieved in 96% of the cases, as compared with 94% according to Majeed assessment. Radiographic examination showed a good consistency between the internal fixation and simulated operation. No screw entry into the hip joint cavity occurred in these cases. The mean operation time was 127 min in these cases with a mean intraoperative blood loss of 728 mL and a mean incision length of 8.4 cm. Based on the postoperative VAS score, 12 patients reported severe pain, 28 reported moderate pain and 10 reported mild pain. All the patients were advised for early functional exercise after the operation and clinical healing was achieved in a mean of 8 weeks.

CONCLUSIONS3D printing with simulated operation can improve the accuracy and safety of the operation. Preoperative simulation of plate preflex and screw length measurement can shorten the operation time. A small incision lateral to the rectus abdominis allows minimally invasive operation for pelvic fractures.

Blood Loss, Surgical ; Bone Plates ; Bone Screws ; Fracture Fixation, Internal ; Fractures, Bone ; surgery ; Humans ; Minimally Invasive Surgical Procedures ; Operative Time ; Pelvic Bones ; injuries ; surgery ; Printing, Three-Dimensional ; Rectus Abdominis ; Retrospective Studies ; Tomography, X-Ray Computed

OBJECTIVETo study the optimal surgical resection length for esophageal carcinoma.

METHODSSpecimens of seventy patients with esophageal squamous cell carcinoma resected and collected in our hospital were made into pathologic giant sections. Direct intramural infiltration, multicentric carcinogenic lesion and leaping metastasis were observed in the large slice by microscope. The actual length during the operation was calculated by the ratio of shrinkage.

RESULTSDirect intramural infiltration was found in 51 (72.9%) patients, 39 proximal and 36 distal to the tumor. The mean length of direct intramural infiltration was 0.9 +/- 0.8 cm (4.0 cm maximum) proximally and 0.5 +/- 0.3 cm (2.0 cm maximum) distally. Multicentric carcinogenic lesion was found in 11 (15.7%) patients, 5 proximally, 8 distally and 2 on both sides. Proximal to the tumor, the mean distance between the multicentric carcinogenic lesion and the main lesion plus the length of the multiple carcinogenic lesion was 3.2 +/- 1.5 cm (4.7 cm maximum). Distal to the tumor, it was 3.6 +/- 2.4 cm (9.1 cm maximum). Leaping metastasis was found in 9 (12.9%) patients, 7 proximally and 4 distally. The mean distance between the leaping metastasis and the main lesion plus the length of the leaping metastatic lesion was 1.9 +/- 0.6 cm (2.9 cm maximum) proximally and 1.4 +/- 1.0 cm (2.7 cm in maximum) distally.

CONCLUSIONThe optimal surgical resection length for esophageal carcinoma should be at least 5 cm proximal to the tumor and total length on the distal side.

Esophageal Neoplasms ; pathology ; surgery ; Female ; Humans ; Male ; Neoplasm Invasiveness

Chronic kidney disease (CKD) is an important global public health problem that greatly threatens population health. Application of risk prediction model is a crucial way for the primary prevention of CKD, which can stratify the risk for developing CKD and identify high-risk individuals for more intensive interventions. By now, more than twenty risk prediction models for CKD have been developed worldwide. There are also four domestic risk prediction models developed for Chinese population. However, none of these models have been recommended in clinical guidelines yet. The existing risk prediction models have some limitations in terms of outcome definition, predictors, strategies for handling missing data, and model derivation. In the future, the applications of emerging biomarkers and polygenic risk scores as well as advances in machine learning methods will provide more possibilities for the further improvement of the model.
Humans ; Renal Insufficiency, Chronic ; Risk Factors ; Biomarkers

This study aimed to compare the predictive value of six selected anthropometric indicators for benign prostatic hyperplasia (BPH). Males over 50 years of age who underwent health examinations at the Health Management Center of the Second Xiangya Hospital, Central South University (Changsha, China) from June to December 2020 were enrolled in this study. The characteristic data were collected, including basic anthropometric indices, lipid parameters, six anthropometric indicators, prostate-specific antigen, and total prostate volume. The odds ratios (ORs) with 95% confidence intervals (95% CIs) for all anthropometric parameters and BPH were calculated using binary logistic regression. To assess the diagnostic capability of each indicator for BPH and identify the appropriate cutoff values, receiver operating characteristic (ROC) curves and the related areas under the curves (AUCs) were utilized. All six indicators had diagnostic value for BPH (all P ≤ 0.001). The visceral adiposity index (VAI; AUC: 0.797, 95% CI: 0.759-0.834) had the highest AUC and therefore the highest diagnostic value. This was followed by the cardiometabolic index (CMI; AUC: 0.792, 95% CI: 0.753-0.831), lipid accumulation product (LAP; AUC: 0.766, 95% CI: 0.723-0.809), waist-to-hip ratio (WHR; AUC: 0.660, 95% CI: 0.609-0.712), waist-to-height ratio (WHtR; AUC: 0.639, 95% CI: 0.587-0.691), and body mass index (BMI; AUC: 0.592, 95% CI: 0.540-0.643). The sensitivity of CMI was the highest (92.1%), and WHtR had the highest specificity of 94.1%. CMI consistently showed the highest OR in the binary logistic regression analysis. BMI, WHtR, WHR, VAI, CMI, and LAP all influence the occurrence of BPH in middle-aged and older men (all P ≤ 0.001), and CMI is the best predictor of BPH.
Middle Aged ; Male ; Humans ; Aged ; Prostatic Hyperplasia ; Obesity/epidemiology* ; Body Mass Index ; China/epidemiology* ; Waist-Height Ratio ; ROC Curve ; Waist Circumference ; Risk Factors