Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: To evaluate the application of blood conservation measures in obstetric patients with different red blood cell transfusion volumes and to assess the impact of different transfusion volumes on postpartum outcomes. Methods: A retrospective investigation was conducted on 448 obstetric patients who received blood transfusions at the Shanghai General Hospital, Shanghai Jiao Tong University School of Medicine from January 2016 to December 2022. Patients were divided into four groups (1-2 units group, 3-4 units group, 5-6 units group, and >6 units group) based on the volumes of red blood cells (RBCs) transfused during and within 7 days after delivery. The maternal physiological indicators, pre- and postpartum laboratory test indicators, obstetric complications, application of blood conservation measures, use of blood products, and postpartum outcomes were reviewed. The clinical characteristics, application of blood conservation measures, and their impact on postpartum outcomes were compared among different transfusion groups. Results: There were statistically significant differences in the multivariate logistic analysis of history of previous cesarean section (OR=1.781), eclampsia/pre-eclampsia/(OR=1.972) and postpartum blood loss>1 000 mL（OR=1.699）(P<0.05) among different transfusion groups. In terms of blood conservation measures, the more RBCs transfused, the higher the rate of mothers receiving blood conservation measures such as balloon occlusion, arterial ligation, autologous blood transfusion with a cell saver, and hysterectomy. With the increase in the volume of RBCs transfusion, the demand for fresh frozen plasma（FFP）, cryoprecipitate, and platelet transfusions also increased. The hospitalization days for the four groups of parturients were 6.0 (4.0-9.0), 7.5 (5.0-14.8), 7.0 (4.5-13.0) and 11.0 (9.0-20.5), respectively (P<0.05) and the rates of ICU transfer were 2.0% (5/250), 9.4% (12/128),18.2% (6/33) and 51.4% (19/37), respectively (P<0.05). Both increased significantly with the increase in the volume of RBCs transfusion, and the differences between groups were statistically significant. Conclusion: Parturients who received higher volume of RBCs had multiple risks factors for bleeding before childbirth, had higher postpartum blood loss, and had a higher rate of application of various blood conservation measures. In addition, an increase in the volume of RBCs transfusion may have adverse effects on postpartum recovery.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Hypercoagulable state (HCS) after kidney transplantation is one of the common and serious complications in kidney transplant recipients, which has attracted increasing attention in recent years. HCS refers to the abnormal and excessive activation of blood coagulation function, leading to the increased risk of thrombosis. After kidney transplantation, the combined effects of hemodynamic changes, surgical trauma and severe rejection increase the incidence of HCS, not only raising the risk of thrombosis but also potentially causing graft failure and affecting the postoperative survival rate of patients. This article reviews the influencing factors, clinical manifestations, diagnostic methods and preventive strategies of HCS after kidney transplantation, aiming to provide a theoretical basis for optimizing perioperative management and improving the prognosis of patients.

OBJECTIVE To optimize the salt-processing technology for Anemarrhena asphodeloides. METHODS Taking soaking time， stir-frying temperature， and stir-frying time as factors， Box-Behnken response surface methodology was employed to optimize the salt-processing technology of A. asphodeloides using the contents of mangiferin， neomangiferin， isomangiferin， timosaponin BⅡ， timosaponin AⅢ， timosaponin BⅢ， total flavonoids， and total saponins as evaluation indicators. The entropy weight method was applied to determine the weight of each indicator and calculate the comprehensive score. Based on the 17 sets of Box-Behnken response surface methodology results， a genetic algorithm （GA）-back propagation （BP） neural network was used to further optimize the salt-processing technology， with soaking time， stir-frying temperature， and stir-frying time as input layers and the comprehensive score as the output layer. The salt-processing parameters obtained from the two methods were validated and compared to determine the optimal salt-processing technology for A. asphodeloides. RESULTS The optimal salt-processing conditions obtained via the Box-Behnken response surface methodology were as follows： soaking time of 23 min， stir-frying temperature of 160 ℃ ， and stir-frying time of 12 min， yielding a comprehensive score of 63.370 2. The GA-BP neural network optimization resulted in the following conditions： soaking time of 24 min， stir-frying temperature of 163 ℃， and stir-frying time of 12 min， with a comprehensive score of 65.163 8. The GA-BP neural network optimization outperformed the results obtained by Box-Behnken response surface methodology. CONCLUSIONS This study successfully optimized the salt-processing technology for A. asphodeloides. Specifically， the technology involves adding 15 mL of 0.1 g/mL saline solution to 50 g of the herbal slices， allowing them to moisten for 24 minutes， and then stir-frying at 163 ℃ for 12 minutes.

OBJECTIVE To review the current research progress on pharmacoeconomics evaluation related to spinal muscular atrophy （SMA）， in order to provide valuable insights for clinical treatment， screening and medical insurance payment decision- making. METHODS A computerized search was conducted across multiple databases including PubMed， Web of Science， Embase， Scopus， Cochrane Library， EBSCOhost， CNKI， VIP， CBM and Wanfang database as well as other important health technology assessment （HTA） websites， such as National Institute for Health and Care Research，International Society of Technology Assessment in Health Care， Agency for Healthcare Research and Quality， etc. The pharmacoeconomics evaluation studies related to SMA were collected from the inception to December 31st， 2023. The literature/reports were rigorously screened based on predefined inclusion and exclusion criteria by two researchers， and the essential information from the included literature/ reports was extracted using Excel 2019. The quality of the included literature/reports was evaluated by Consolidated Health Economic Evaluation Reporting Standards 2022. RESULTS Finally， 9 articles and 15 HTA reports were included， with overall good quality of literature， but poor quality of HTA reports. There were a total of 24 studies on the pharmacoeconomics evaluation of SMA， including treatment options such as nusinersen sodium， sovaprevir， risperidone， and best supportive therapy.The review results showed that nusinersen sodium was not cost-effective in the treatment of SMA； there was no consensus on the economic viability of treatment options such as risperidone and sovaprevir； newborn/prenatal screening combined withmedication therapy was cost-effective. CONCLUSIONS newborn/prenatal screening combined with SMA medication therapy demonstrates economic advantages. It is suggested to further investigate the cost-effectiveness of new SMA drugs and SMA screening in China， taking localization parameters and medical insurance prices into account， and gradually incorporate SMA screening into the scope of neonatal genetic disease detection， in order to alleviate the financial burden of patients’ families and healthcare systems.

OBJECTIVE To establish a method for determining the content of 11 antioxidants and their degradation products in recombinant Exendin-4-FC fusion protein injection by HPLC. METHODS The protein was precipitated with saturated ammonium sulfate. After centrifugation, the supernatant was transferred to a C18 solid phase extraction cartridge activated by methanol. Then the cartridge was eluted with 4 mL of methanol and 5 mL of ethyl acetate respectively, and the eluent was diluted with methanol-ethyl acetate(2∶3) mixed solvent and passed through a 0.22 µm PTFE hydrophobic filter. It was analyzed by HPLC and quantified by external standard method. Chromatographic conditions: Kinetex® XB-C18 100Å (100 mm×4.6 mm, 2.6 µm)column, the detection wavelength was 230 nm, the column oven was 30 ℃, the injection volume was 5 µL and the flow rate was 0.4 mL·min–1, mobile phase was 0.1% formic acid-methanol(A)-0.1% formic acid aqueous solution(B), the running time was 45 min. RESULTS The 11 target substances showed a good linear relationship in the range of 2.5−35 μg·mL–1 with R2 ≥0.99. At three different concentration(25, 10, 5 μg·mL–1) of spiked samples, the average recovery rates of 11 antioxidants ranged from 88.1% to 106.5%, with RSDs in the range of 0.10%–9.05%. The RSDs of 6 repeatable samples was 2.01%–4.77%, which of 12 intermediate precision samples was 2.58%–9.75%. The positive/inverted samples of three batches of recombinant Exendin-4-FC fusion protein injection were detected at 0 month, 3 months and 6 months(25 ℃), and the results showed that there was no antioxidant and its degradation leaching in all batches of samples at different detection points. CONCLUSION The method has good specificity, high accuracy and precision, good solution stability, high durability and can be used for the content detection of antioxidants in drugs.