Objective To investigate the impacts of LASP-1 on the behavior and cell proliferation ability of tumor derived osteoblast-like cells and non tumor derived osteoblasts. Methods QRT-PCR and Western blot were performed to detect LASP-1 expressions in mouse bone marrow mesenchymal stem cells(BMMSC),human osteoblasts (hOB) and human osteosarcoma cell (MG-63). With the construction of recombinant vector and the transfection of shLASP-1,the expression changes in both LASP-1 and osteocalcin(OCN),and the cell number of cell-cycle phase distribution were analyzed. Results With up-or down-regulation of LASP-1,osteocalcin(OCN) expression,cell proliferation ability and the cell number of G2/M phase in non tumor cells(BMMSC,hOB)had no obvious changes. However,as for the tumor cells(MG-63),with an increased expression of LASP-1,the expression of OCN,cell proliferation number and the cell number at G2/M phase changed. There was no significant effect on the moving ability of each cell. Conclusions LASP-1 has no significant effect on the osteogenic proper-ties,cell proliferation ability and cell cycle distribution of non tumor derived cells,but has a regulatory effect on tumor derived cells(MG-63).

Objective:To investigate the influencing factors of ultrasonic missed diagnosis of kidney neoplasm.Methods:The clinical data of 2 033 patients pathologically diagnosed with kidney neoplasm after operation and with complete medical record in Shanxi Province Cancer Hospital from January 2013 to October 2021 were retrospectively analyzed. Preoperative ultrasound diagnosis, clinical data, CT/magnetic resonance imaging (MRI) were analyzed, and ultrasound missed diagnosis rate was calculated. Chi-square test and multivariate logistic regression were used to analyze the influencing factors of ultrasonic missed diagnosis of kidney neoplasm mainly based on the anatomic characteristics of neoplasm.Results:The ultrasonic missed diagnosis rate of kidney neoplasm was 1.87% (38/2 033), among which the ultrasonic missed diagnosis rate of renal parenchymal neoplasm was 1.33% (25/1 874) and the ultrasonic missed diagnosis rate of renal pelvis neoplasm was 8.18% (13/159). The results of multivariate logistic regression analysis showed that the patients' body mass index (BMI) ≥ 24 kg/m 2 ( OR = 2.805, 95% CI 1.030-7.641), the small lesion ( OR = 0.425, 95% CI 0.293-0.617), the lesion located on the left kidney ( OR = 0.307, 95% CI 0.113-0.834), the lesion located on the body ( OR = 0.344, 95% CI 0.124-0.956 compared to lesions in the upper pole of the kidney; OR = 0.239, 95% CI 0.069-0.834 compared to lesions in the lower pole of the kidney) and the lesion located on the dorsal side ( OR = 0.409, 95% CI 0.172-0.970) were independent influencing factors for ultrasound missed diagnosis of renal parenchymal neoplasms (all P < 0.05). Patients with BMI ≥ 24 kg/m 2 ( OR = 10.464, 95% CI 1.042-105.087), concurrent ureteral or (and) bladder urothelial carcinoma ( OR = 32.937, 95% CI 4.017-270.063), and small lesion size ( OR = 0.216, 95% CI 0.081-0.577) were independent influencing factors for ultrasound missed diagnosis of renal pelvis neoplasms (all P < 0.05). Conclusions:Obesity, small focus, focus on the left kidney, focus on the body, and focus on the back may be the main reasons for ultrasonic missed diagnosis of renal parenchymal neoplasms. Obesity, concurrent ureteral or/and bladder urothelial carcinoma and small lesions may be the main reasons for ultrasonic missed diagnosis of renal pelvis neoplasms.

A case is presented involving a patient with a history of pelvic fracture who experienced progressive difficulty in urination following the removal of a urethral catheter. Attempt to retain the catheter was unsuccessful, leading to an ultrasound-guided suprapubic puncture cystostomy. Subsequently, the patient developed persistent abdominal pain, distension, nausea, and vomiting. Analysis of turbid greyish-yellow thin purulent fluid obtained during abdominal paracentesis indicated the presence of peritonitis. Urgent surgical exploration revealed that the diversion tube had passed through the abdominal cavity and into the bladder. The entire abdominal cavity was filled with yellowish-thin purulent fluid. Intraoperatively, the patient presented with worsening hypotension, tachycardia, oliguria, and decreased skin temperature, suggestive of septic shock resulting from peritonitis. Prompt management, including antimicrobial therapy, hemodynamic support, and fluid resuscitation, successfully controlled the infectious symptoms, leading to complete recovery. In clinical practice, the emphasis is often placed on assessing injuries to intra-abdominal organs, whereas awareness and understanding of peritoneal injuries remain limited. As a result, postoperative peritonitis is frequently attributed solely to intra-abdominal organ damage, overlooking the potentially grave consequences of pure peritoneal injury. Therefore, it is imperative to enhance our recognition and knowledge regarding peritoneal injuries, enabling timely diagnosis and treatment to prevent the occurrence of complications.

OBJECTIVETo investigate the property of genipin-crosslinked silk fibroin(SF)/chitosan(CS) microspheres for slow releasing of bovine serum albumin (BSA).

METHODSBSA-loaded genipin-crosslinked SF/CS microspheres were prepared by emulsion cross-linking technique. The micropheres were observed for surface morphology and size distribution under scanning electron microscope (SEM), and X-ray diffractometry (XRD) and fourier transform infrared spectroscopy (FTIR) were used to analyze their structural characteristics. BCA method was used for determining the drug entrapment, loading rate and cumulative drug release in 21 days.

RESULTThe microspheres were spherical and showed a smooth surface with an average diameter of 7.84∓0.97 µm. The drug entrapment efficiency of the microspheres was (50.16∓4.32)% with a drug loading ratio of (1.25∓0.11)% and a cumulative release of the total drug of (75.2∓2.53)% in 21 days.

CONCLUSIONGenipin-crosslinked SF/CS microspheres have a high drug entrapment efficiency and possess good capacity of sustained drug release.

Chitosan ; chemistry ; Delayed-Action Preparations ; Emulsions ; Fibroins ; chemistry ; Iridoids ; chemistry ; Microscopy, Electron, Scanning ; Microspheres ; Particle Size ; Spectroscopy, Fourier Transform Infrared ; X-Ray Diffraction ; X-Rays

Objective To evaluate the therapeutic outcome of horizontal bone augmentation by using the modified split crest technique of piezosurgery in mandible molar area. Methods The present study reviewed the record of 15 patients from 2016 January to 2017 March in the department of oral implantology center of Stomato-logical Hospital of Southern Medical University,who underwent the modified split crest technique of piezosurgery in mandible molar area. Preoperative CBCT was performed to determine the bone thickness of the toothless alveo-lar crest of the mandibular posterior region,and the bone thickness was less than 3 mm. The modified split crest technique of piezosurgery was performed for the horizontal bone augmentation at mandibular posterior region. Meanwhile,GBR and the postoperative CBCT were performed to determine the bone width increments,followed with 1-week anti-inflammatory therapy postoperation. Three months after the operations,the bone width incre-ment was examined by CBCT. SPSS13.0 software was used to analyze the collected data. Results The modified split crest technique of piezosurgery in mandible molar area was successfully established,resulting in the mini-mal operative wounds and the slight postoperative reaction,without obvious infection. The postoperative crest width increase achieved 6.05 ± 0.65 mm. At 3 months after operation,the crest width increase reduced to(5.81 ± 0.61)mm. There were significant differences of the alveolar ridge thickness between the preoperative and post-operative patients(P<0.05). There were significant differences between the preoperative crest width and the 3 months after treatment(P<0.05). Conclusion Horizontal bone augmentation of the modified split crest tech-nique of piezosurgery was efficient,which could be performed in very narrow alveolar ridge,and which was rela-tively safe and accurate,with less trauma. No damage was observed to the soft tissue,and the cutting direction can be well controlled.

The crown-root ratio (C/R) theory of natural teeth has been widely recognized in the field of stomatology,and has important clinical significance in predicting and assessing the prognosis of natural teeth as well as for abutment selection during denture restoration. In the past few decades, scholars have advocated for the implantation of implants as long in length as possible to improve the success rate according to the theory of crown-root ratio of natural teeth. However, with the application of short implants, our philosophy of implantation has changed, and the relationship between the crown-implant (C/I) ratio and complications has become one of the current research hotspots. In this paper, the concept of the crown-implant ratio, the research progress of the C/I ratio, the implant survival rate and clinical complications of implant restoration were reviewed and summarized, and the following suggestions were put forward: although most studies have shown no significant correlation between the C/I ratio and implant survival or marginal bone loss, this relationship may increase the risk of mechanical complications. A C/I < 3 and a crown length < 15 mm are recommended in implant restoration; when ultra-short implants are applied, the implant system can increase the bone-to-implant contact area, and splint prostheses such as crown or bridge are recommended.

Objective : To explore the clinical effect of the alveolar crest approach in the treatment of odontogenic maxillary sinusitis and the repair of edentulous implants in this area. Methods: This was a retrospective case series of 20 patients with odontogenic sinusitis. The pathogenesis in each case was investigated. After elimination of the dental origin, each patient was treated with flushing, drainage and anti-inflammatories through the alveolar crest approach. Postoperative CBCT reexamination was performed to evaluate the therapeutic effect. Maxillary sinus elevation surgery with simultaneous or delayed implantation was performed after maxillary sinusitis healing was confirmed. The patients were followed postoperatively. Results : Twenty patients with odontogenic sinusitis were treated by the alveolar crest approach, and 17 were cured, for a cure rate of 85%. Among them, 17 of the maxillary sinusitis patients were followed for 1 year, with good results. Conclusion The alveolar crest approach is feasible for the treatment of odontogenic maxillary sinusitis and can serve as a minimally invasive method for the repair of edentulism in this area and implantation.

Objective : To investigate the effect of a laser-etched pure titanium surface on proliferation of the human osteosarcoma cell line MG63 and to provide a basis for study of implant surface modification. Methods: The pure titanium plate was cut into titanium pieces by a numerical control machine tool and divided into smooth surface and laser etching groups. The titanium surface of the laser etching group was etched with an Nd:YAG continuous wave laser using predetermined parameters, and the surfaces were observed by scanning electron microscopy (SEM). The surface micromorphology of each titanium sheet was evaluated. The relative element content of the titanium surface was measured by energy dispersive X-ray spectroscopy (EDS). The Ra value of each surface was determined using the Veeco roughness tester. MG63 cells were inoculated on 2 sets of titanium tablets. At 1, 3, and 6 h postinoculation, cell adhesion to the two groups of titanium sheets was observed under the microscope. At 24 h after inoculation, cellular F-actin was directly stained using immunofluorescence, and the morphology of the cytoskeleton was observed by laser confocal microscopy. Cell proliferation was examined at 1, 3, and 5 d using a MTS kit, and the data were analyzed with SAS 9.4. Results : The surface of the smooth surface group was smooth and flat, the element composition was pure titanium, and the roughness Ra was 179.23 nm. The surface of the laser-etched group formed a regular and uniform pore structure. The composition was mainly Ti, O, C, etc, and the surface roughness Ra was 14.11 μm. A large number of cells were uniformly distributed on the two titanium sheets in the observations at 1, 3, and 6 h. At 24 h postinoculation, MG63 cells were completely stretched on the two sets of titanium sheets and had extended a large number of pseudopods and microfilaments to cross-link with peripheral cells; moreover, the cell division phase was observed. The cell proliferation of the two groups at 1, 3, and 5 d showed a significant increase with time, indicating that no cytotoxicity occurred on the surfaces of the two groups. However, the cell proliferation in the laser-etched group was superior to that in the mechanical smooth surface group. Conclusion The surface morphology of titanium can be controlled by laser etching, which is conductive to increase the microstructure of implants without cytotoxicity and promoting osteoblast proliferation in the early stage.

Objective: To investigate the effect of pure titanium surface of large diameter TiO2 nanotubes modified by RGD peptide on the adhesion and proliferation of MG63 osteoblasts. to provide theoretical proof for developing titanium implants. Methods: Commercially pure titanium discs were divided into four groups and treated with SLA to obtain a microrough surface (SLA group). Then, nanotubes were imposed on this microrough surface by anodization (SLA+80 group). The surface was then modified by dopamine (DOPA) (DOPA Group), after which bioactive RGD peptide layers were generated on the TiO2 nanotube surfaces via electrochemical and molecular self-assembly techniques (RGD group). The titanium surface morphology and elemental composition of each group were characterized by field emission scanning electron microscopy (FE-SEM) and X-ray photoelectron spectroscopy (XPS). MG63 cells were cultured in vitro to evaluate biological activities of titanium before and after treatment, including the evaluation of early-stage cell adhesion capacity by fluorescence microscopy, proliferation capacity by MTS assay, and mRNA expression of the cell osteoblast-related genes alkaline phosphatase (ALP) and osteocalcin (OCN) by qRT-PCR. Results: FE-SEM and XPS showed that hierarchical micro/nanosurfaces decorated with TiO2 nanotubes were produced on titanium using sandblasting and large grit etching combined with anodization, dopamine was then self-polymerized to form a polydopamine film on the TiO2 nanotube surfaces, and RGD peptides were then conjugated to the polydopamine film, finally forming RGD peptide-modified bioactive layers. In vitro experiments showed that compared with the other three materials, the RGD-modified material was more conducive to cell adhesion and proliferation (P < 0.05). The expression levels of ALP and OCN mRNA in the RGD group were significantly higher than those in the SLA group and DOPA group (P < 0.05). Conclusion Hierarchical micro/nanosurfaces decorated with TiO2 nanotubes functionally modified with RGD peptides have good biocompatibility and could be used for developing titanium implants and further improving early osseointegration.

Objective:To describe the baseline characteristics of the subjects enrolled in the China Quantitative CT (QCT) big data program in 2018—2019.Methods:Based on baseline data from the Chinese health big data project from January 2018 to December 2019 from the eligible enrolled population, measurements of bone mineral density (BMD) and visceral adipose tissue (VAT) were performed using Mindways′ QCT Pro Model 4 system. The baseline data of age, gender, regional distribution, height, weight, abdominal circumference, blood pressure, blood routine and blood biochemical tests were analyzed. And the single factor analysis of variance (ANOVA) was used to check the age related trend of BMD and VAT in both genders.Results:After screening the inclusion exclusion criteria and outliers of the main indicators, 86 113 people were enrolled in the project. The enrollment rate was 92.47%, including 35 431 (41.1%) women and 50 682 (58.9%) men, and the ratio of men to women was 1.43. The mean age was (50.3±12.7) years in all the subjects, and it was (50.2±12.8) years and (50.4±12.5) years in men and women, respectively, and there was no statistical difference between the two genders ( P>0.05). Total of 43 833 people were enrolled in east China, it was the largest group by region (50.90%), it was followed by central China (16 434 people, 19.08%), and the number of people enrolled in Northeast China was the lowest (2 914 people, 3.38%). The rate of completing of health information indicators related to the main outcome of the study were all above 70%, and there were significant differences between men and women (all P<0.05). The mean BMD was (139.33±46.76) mg/cm 3 in women, (135.90±36.48) mg/cm 3 in men, which showed a decreasing trend with age in both gender (both P<0.001); the mean intra-abdominal fat area was (116.39±56.23) cm 2 in women, (191.67±77.07) cm 2 in men, and there was an increasing trend with age in both men and women (both P<0.001). Conclusions:There are gender differences in BMD and VAT measured by QCT with different age tendency, and there are gender differences in health information index. Regional factors should also be taken into account for regional differences in the inclusion of data.