Objective To establish a high-performance liquid chromatography-tandem mass spectrometry(LC-MS/MS)method for the simultaneous determination of seven vitamin Bs(VBs)in rat plasma.Methods The plasma samples were pretreated using the protein precipitation method.The chromatographic separation was achieved using an Agilent ZORBAX SB-Aq column(2.1 mm×150 mm,3.5 μm),with a mobile phase composed of 0.01%formic acid(A)and methanol(B)in a gradient elution mode.The flow rate was set at 0.3 mL·min-1 and the column temperature was maintained at 30℃.Mass spectrometric detection was performed using positive ion mode in multiple reaction monitoring.2,4,5,6-Deuteronicotinamide was used as the internal standard.Results Methodological validation results showed that the lowest limits of quantitation(LOQs)for the seven VBs ranged from 7.5 to 300 ng/mL,while the highest LOQs ranged from 1 000 to 20 000 ng·mL-1.Within a certain concentration range,all compounds showed a good linearity(r2>0.992 2).The accuracies ranged from 86.0%to 117.6%,and both intra-and inter-batch precision were less than 20%.Additionally,all analytes demonstrated extraction recoveries greater than 86.1%.No significant matrix effects were observed,and the stability was good.The established validation method was successfully applied to the pharmacokinetics study of single intragastric administration of VB solution in SD rats.Conclusion The analytical method established in this study is simple,rapid,sensitive,and exclusive for the simultaneous determination of VB in real plasma samples.This LC-MS/MS method provides a new analytical tool for further exploring the physiological and pathological effects of VB.

BACKGROUND:The study of the lumbar spine and pelvis in patients with Lenke type 5 lordosis is limited to the coronal and sagittal planes,and the three-dimensional relationship between the scoliosis and the pelvis has not yet been clarified. OBJECTIVE:To analyze the effect of lumbar scoliosis on the pelvis in patients with Lenke type 5 lordosis and to study the correlation between the lumbar spine and the three-dimensional spatial position of the pelvis. METHODS:Imaging data of 60 patients with Lenke type 5 lordosis scoliosis admitted to the 3D Printing Reception Center of Shanghai Ninth People's Hospital,Shanghai Jiao Tong University School of Medicine from January 2019 to September 2023 were retrospectively analyzed,including Cobb angle,coronal pelvic tilt,lumbar lordosis,left and right pelvic hip width ratio(sacroiliac-anterior superior iliac spine),spinal rotation angle,pelvic tilt,sacral slope,pelvic incidence,coronal deformity angular ratio,sagittal deformity angular ratio,C7 plumb line-center sacral vertical line,apical vertebral translation,and coronal sacral inclination.The information was summarized as a database.SPSS 22.0 software was used to analyze the data related to the lumbar spine and pelvis of the patients with Lenke type 5 primary lumbar curvature adolescent idiopathic scoliosis using Spearman's correlation analysis and linear regression. RESULTS AND CONCLUSION:(1)Cobb angle was highly positively correlated with coronal deformity angular ratio,apical vertebral translation,and spinal rotation angle(r=0.91,r=0.841,r=0.736).(2)Coronal deformity angular ratio was highly positively correlated with apical vertebral translation(r=0.737),moderately positively correlated with C7 plumb line-center sacral vertical line(r=0.514),and moderately negatively correlated with sagittal deformity angular ratio(r=-0.595).(3)There was a high positive correlation between lumbar lordosis and sagittal deformity angular ratio(r=0.942)and a moderate negative correlation with coronal deformity angular ratio(r=-0.554).(4)There was a moderate positive correlation between Cobb angle with coronal pelvic tilt and coronal sacral inclination(r=0.522,r=0.534)and a moderate positive correlation between C7 plumb line-center sacral vertical line and coronal pelvic tilt(r=0.507).Apical vertebral translation with coronal pelvic tilt and coronal sacral inclination showed a moderate positive correlation(r=0.507,r=0.506).Lumbar lordosis with sacral slope and pelvic incidence showed a moderate positive correlation(r=0.512,r=0.538).Sagittal deformity angular ratio was moderately positively correlated with sacral slope and pelvic incidence(r=0.614,r=0.621).(5)Studies have found that the relative position of the lumbar spine and the pelvis is closely related in the horizontal,sagittal and coronal planes.When the lumbar spine affects scoliosis and is rotated,the relative position of the pelvis will also change to compensate,which indicates that while correcting scoliosis,the correction of the pelvis cannot be ignored.

Objective:To explore the value of 5G robotic remote ultrasound in the diagnosis of plateau pulmonary edema(HAPE).Methods:A total of 27 patients who quickly entered Nagqu, Tibet at an altitude of 4 600 m-5 600 m from March to December 2021 and developed one of the clinical symptoms of HAPE were collected. All patients were examined by 5G remote robotic ultrasound and lung CT respectively. Kappa test was used to analyze the consistency of the two diagnostic results, and McNemar test was used to compare the difference in diagnostic results. The ROC curve was used to analyze the sensitivity and specificity of remote lung ultrasound scores in the diagnosis of HAPE.Results:Among the 27 patients, 16 showed thickening of pleural line, increasing of B line, lung consolidation, pleural effusion, etc. Meanwhile, 11 showed no abnormality. Additionally, 8 cases had diffuse pulmonary fluid in both lungs, and 8 cases had localized pulmonary fluid. ROC curve showed that the area under the curve of lung ultrasound score for the diagnosis of HAPE was 0.947 (95% CI=0.78-0.99, P<0.001). The sensitivity and specificity were 0.933 and 0.917, respectively. Lung CT diagnosis was positive in 15 cases. Lung CT showed thickening of lung texture, ground glass, small nodular shadow, fine reticulate shadow, etc. The diagnostic results of the two techniques were in good agreement (Kappa=0.924, P<0.001), and there was no significant difference between the two methods ( P>0.05). Conclusions:5G remote robotic ultrasound has high consistency with CT in the diagnosis of HAPE and is an alternative early diagnosis method for HAPE. It may have clinical application value in scattered medical resources and remote plateau areas.

The ideological and political construction of medical courses reveals the educational essence of "truth, goodness, and beauty" in medicine. Scientificity and humanity are the embodiment of "seeking truth" and "advocating goodness" in medicine, and the unity of their content and form reaches the highest level of "advocating beauty". Studying the ideological and political construction of medical courses plays an important role in implementing the fundamental task of fostering virtue through education, and carrying out the Healthy China initiative. In terms of teaching objectives, the goals of ideological and political education in medical courses should not only include the goals of basic literacy goals, such as political literacy, cultural literacy, legal literacy, and moral cultivation, but also include professional literacy goals, such as medical humanistic cultivation. Thus, a "five in one" model of ideological and political education in medical courses will be established. In the practical path, it is suggested to explore from five aspects that changing the educational concept and strengthening the educational awareness, establishing teaching objectives and clarifying education direction, digging deeply into the ideological and political elements and clearing teaching content, innovating teaching methods and improving teaching effectiveness, and constructing evaluation indicators and evaluating teaching effectiveness scientifically.

Neuroplastin 65 (Np65) is an immunoglobulin superfamily cell adhesion molecule involved in synaptic formation and plasticity. Our recent study showed that Np65-knockout (KO) mice exhibit abnormal cognition and emotional disorders. However, the underlying mechanisms remain unclear. In this study, we found 588 differentially-expressed genes in Np65-KO mice by microarray analysis. RT-PCR analysis also revealed the altered expression of genes associated with development and synaptic structure, such as Cdh1, Htr3a, and Kcnj9. In addition, the expression of Wnt-3, a Wnt protein involved in development, was decreased in Np65-KO mice as evidenced by western blotting. Surprisingly, MRI and DAPI staining showed a significant reduction in the lateral ventricular volume of Np65-KO mice. Together, these findings suggest that ablation of Np65 influences gene expression, which may contribute to abnormal brain development. These results provide clues to the mechanisms underlying the altered brain functions of Np65-deficient mice.
Affective Symptoms ; metabolism ; Animals ; Brain ; diagnostic imaging ; metabolism ; pathology ; Cognition Disorders ; metabolism ; Gene Expression ; Magnetic Resonance Imaging ; Membrane Glycoproteins ; deficiency ; genetics ; physiology ; Mice, Knockout ; Microarray Analysis ; Organ Size ; Real-Time Polymerase Chain Reaction ; Wnt3 Protein ; metabolism

ObjectiveTo review the classification of orthopedic insoles, common techniques of 3D printing orthopedic insoles, common materials and their application for flatfoot. MethodsLiteratures were retrieved from PubMed, Web of Science, CNKI and Wanfang Data from 2012 to 2022, and the relevant contents were summarized. ResultsA total of ten studies were finally included, from 5 countries, involving 290 participants, which published from 2019 to 2022. Orthotic insoles were classified as prefabricated, semi-custom, and custom, while custom ones were classified as traditional custom and 3D printed custom. 3D printed orthotic insoles were often made with selective laser sintering, fused deposition modeling (FDM) and PolyJet printing technologies, and commonly used materials included ethylene-vinyl acetate (EVA), polylactic acid, thermoplastic polyurethane, polyamide, and polypropylene. For flatfoot, 3D printed orthotic insoles could improve plantar pressure, relieve foot pain and the combined use of insole posting could control rearfoot valgus. Conclusion3D printed custom insoles can be made more efficiently and accurately than traditional custom insoles. The printing technologies and materials often chosen for 3D printed orthotic insoles are mainly FDM and EVA. 3D printed orthotic insoles is effective on plantar pressure, comfort and foot movement function of flatfoot.

Objective: To estimate the incidence and mortality of bladder cancer in China based on the cancer registration data in 2014, collected by the National Central Cancer Registry (NCCR). Methods: There were 449 cancer registries submitted bladder cancer new cases and deaths occurred in 2014 to NCCR. After evaluating the data quality, 339 registries′ data were finally accepted for analysis. According to the national population data of 2014, the nationwide incidence and mortality of bladder cancer were estimated by stratification in the area (urban or rural), gender, and age. Chinese population census in 2000 and Segi′s population were used for age-standardized incidence/mortality rates. Results: All 339 cancer registries covered a total of 288 243 347 populations (144 061 915 in urban and 144 181 432 in rural areas). The percentage of morphologically verified cases and death certificate-only cases were 74.86% and 1.45%, respectively. The mortality to incidence ratio was 0.41. The estimates of new bladder cancer cases were 78 100 in China in 2014, with a crude incidence rate of 5.71/100 000. The age-standardized incidence rates by China standard population (ASR China) and world standard population (ASR world) of bladder cancer were 3.61/100 000 and 3.56/100 000, respectively. Cumulative incidence rate of bladder cancer in China was 0.41%. The crude and ASR China incidence rates in urban areas were 6.88/100 000 and 4.07/100 000, respectively, whereas those were 4.29/100, 000 and 2.96/100 000 in rural areas. The estimates of bladder cancer deaths caused by bladder cancer were about 32 100 in China in 2014, with a crude mortality rate of 2.35/100 000. The ASR China and ASR world mortality rates were both 1.30/100 000 with a cumulative mortality rate (0-74 years old) of 0.12%. The crude and ASR China mortality rates were 2.79/100 000 and 1.41/100 000 in urban areas, respectively, whereas those were 1.81/100 000 and 1.14/100 000 in rural areas. Conclusions The incidence and mortality pattern of bladder cancer were different in urban and rural areas. The incidence and mortality were higher in urban areas than that in rural areas, and higher for male than for female. We should focus on strengthening the prevention and control of bladder cancer in key population, especially men in urban areas.