Objective The study aimed to investigate the impact of rare earth elements(REEs)exposure on pregnancy outcomes of in vitro fertilization-embryo transfer(IVF-ET)by analyzing samples from spouses. Methods A total of 141 couples were included.Blood and follicular fluid from the wives and semen plasma from the husbands,were analyzed for REEs using inductively coupled plasma mass spectrometry(ICP-MS).Spearman's correlation coefficients and the Mann-Whitney U test were used to assess correlations and compare REE concentrations among three types of samples,respectively.Logistic models were utilized to estimate the individual REE effect on IVF-ET outcomes,while BKMR and WQS models explored the mixture of REE interaction effects on IVF-ET outcomes. Results Higher La concentration in semen(median 0.089 ng/mL,P=0.03)was associated with a lower fertilization rate.However,this effect was not observed after artificial selection intervention through intracytoplasmic sperm injection(ICSI)(P=0.27).In semen,the REEs mixture did not exhibit any significant association with clinical pregnancy. Conclusion Our study revealed a potential association between high La exposure in semen and a decline in fertilization rate,but not clinical pregnancy rate.This is the first to report REEs concentrations in follicular fluid with La,Ce,Pr,and Nd found at significantly lower concentrations than in serum,suggesting that these four REEs may not accumulate in the female reproductive system.However,at the current exposure levels,mixed REEs exposure did not exhibit reproductive toxicity.

BACKGROUND:Patients with degenerative cervical spondylosis often suffer from changed varicosity of the cervical spine,unbalanced neck-shoulder muscular strength,and descending power. OBJECTIVE:To probe into the correlation between sagittal curvature parameters and pain threshold for neck-shoulder muscles in degenerative cervical spondylosis. METHODS:Totally 50 patients with degenerative cervical spondylosis received treatment at the 3D Printed Outpatient Center of Shanghai Ninth People's Hospital,Shanghai Jiao Tong University School of Medicine from January 2022 to March 2023 were included in the study.After excluding the 10 patients of cervical lateral projection that failed to meet the measurement conditions,the cervical lateral projections were shot to measure the following iconography parameters:Borden value and C2-7 Cobb angle as well as pain thresholds on the midpoint of the superior trapezius muscle in bilateral bundles and at 1 cm beside the C5-6 interspike.The correlation between sagittal curvature parameters and pain threshold of neck-shoulder muscles in degenerative cervical spondylosis was analyzed. RESULTS AND CONCLUSION:(1)The Borden value of sagittal curvature showed a moderately positive correlation with the bundle pain threshold in the left upper trapezius muscle,the bundle pain threshold in the right upper trapezius muscle,and the pain threshold at the 1 cm of the left side beside the C5-6 interspike(r=0.498,P<0.01;r=0.448,P<0.05;r=0.405,P<0.05)and a weak positive correlation with the pain threshold at the 1 cm of the right side beside the C5-6 interspike(r=0.322,P<0.05).(2)The C2-7 Cobb angle showed a weak positive correlation with the left squared myalgia threshold(r=0.355,P<0.05),and there was no correlation with the pain threshold of the left trapezius muscle and the pain threshold at the 1 cm of both sides beside the C5-6 interspike.(3)There was a correlation between the pain threshold of the neck-shoulder muscles,and a high correlation between the pain threshold of the left and right muscles and the pain threshold within the left and right side muscles,indicating that the neck-shoulder muscles are consistent and may be related to the coordination of the neck-shoulder movements.

BACKGROUND:The study of the lumbar spine and pelvis in patients with Lenke type 5 lordosis is limited to the coronal and sagittal planes,and the three-dimensional relationship between the scoliosis and the pelvis has not yet been clarified. OBJECTIVE:To analyze the effect of lumbar scoliosis on the pelvis in patients with Lenke type 5 lordosis and to study the correlation between the lumbar spine and the three-dimensional spatial position of the pelvis. METHODS:Imaging data of 60 patients with Lenke type 5 lordosis scoliosis admitted to the 3D Printing Reception Center of Shanghai Ninth People's Hospital,Shanghai Jiao Tong University School of Medicine from January 2019 to September 2023 were retrospectively analyzed,including Cobb angle,coronal pelvic tilt,lumbar lordosis,left and right pelvic hip width ratio(sacroiliac-anterior superior iliac spine),spinal rotation angle,pelvic tilt,sacral slope,pelvic incidence,coronal deformity angular ratio,sagittal deformity angular ratio,C7 plumb line-center sacral vertical line,apical vertebral translation,and coronal sacral inclination.The information was summarized as a database.SPSS 22.0 software was used to analyze the data related to the lumbar spine and pelvis of the patients with Lenke type 5 primary lumbar curvature adolescent idiopathic scoliosis using Spearman's correlation analysis and linear regression. RESULTS AND CONCLUSION:(1)Cobb angle was highly positively correlated with coronal deformity angular ratio,apical vertebral translation,and spinal rotation angle(r=0.91,r=0.841,r=0.736).(2)Coronal deformity angular ratio was highly positively correlated with apical vertebral translation(r=0.737),moderately positively correlated with C7 plumb line-center sacral vertical line(r=0.514),and moderately negatively correlated with sagittal deformity angular ratio(r=-0.595).(3)There was a high positive correlation between lumbar lordosis and sagittal deformity angular ratio(r=0.942)and a moderate negative correlation with coronal deformity angular ratio(r=-0.554).(4)There was a moderate positive correlation between Cobb angle with coronal pelvic tilt and coronal sacral inclination(r=0.522,r=0.534)and a moderate positive correlation between C7 plumb line-center sacral vertical line and coronal pelvic tilt(r=0.507).Apical vertebral translation with coronal pelvic tilt and coronal sacral inclination showed a moderate positive correlation(r=0.507,r=0.506).Lumbar lordosis with sacral slope and pelvic incidence showed a moderate positive correlation(r=0.512,r=0.538).Sagittal deformity angular ratio was moderately positively correlated with sacral slope and pelvic incidence(r=0.614,r=0.621).(5)Studies have found that the relative position of the lumbar spine and the pelvis is closely related in the horizontal,sagittal and coronal planes.When the lumbar spine affects scoliosis and is rotated,the relative position of the pelvis will also change to compensate,which indicates that while correcting scoliosis,the correction of the pelvis cannot be ignored.

Objective To investigate the correlation between the total CSVD burden and fundus vasculopathy,and evaluate significance of fundus vasculopathy for cognitive impairment in CSVD patients.Methods A total of 290 inpatients who taking physical examination in our department from May 2021 to August 2022 were consecutively recruited,and according to their score of CSVD,they were divided into group 0(129 cases),group 1(51 case),group 2(42 cases),group 3(44 cases),and group 4(24 cases).All the subjects underwent brain magnetic resonance imaging,fundus fluorescein angiography,and cognitive function assessment.The total CSVD burden and fundus vasculopathy were evaluated.The general clinical data,results of laboratory tests,fundus vascularization,and cognitive function were compared among the groups with different CSVD burden scores.Spearman correlation analysis and linear correlation analysis were used to explore the correlation between total CSVD burden score and fundus vascular disease.Results Significant differences were observed in terms of age,years of education,cerebral infarction/TIA,total cho-lesterol,LDL-C,creatinine,MoC A and MMSE scores,positive results of connectivity test,digit-symbol conversion test,Stroop colour-word interference test and verbal fluency test,values of CRAE,CRVE,AVR,Scheie grade,DWMH and PVWMH,enlarged perivascular space in the basal ganglia(BG-EPVS),lacunar infarct and cerebral microbleeds(CMB)in different CSVD total bur-den groups(P＜0.05,P＜0.01).Spearman correlation analysis showed that total CSVD burden was negatively correlated with CRAE and AVR(r=-0.655,P=0.000;r=-0.679,P=0.000),and positively with CRVE and Scheie grade(r=0.560,P=0.000;r=0.685,P=0.000).Multivari-ate linear analysis showed that the total CSVD burden after adjusting for relevant risk factors was significantly correlated with CRAE,CRVE,AVR and Scheie grades(P＜0.01).Conclusion Fun-dus vasculopathy is strongly associated with increased total CSVD burden,and it can be regarded as a valid predictor of CSVD-related cognitive impairment.

Objective:To investigate the diagnostic value of serum serine protease (Corin) in chronic renal failure (CRF) complicated with heart failure.Methods:A retrospective analysis was conducted on 120 patients, (64.05±13.89) years old, 77 male (64.17%), with chronic renal failure combined with heart failure admitted to Zhengzhou People′s Hospital from January 1, 2023, to December 31, 2023. The control group consisted of 87 patients, (60.59±8.78) years old, 54 male (62.07%), with simple chronic renal failure. Clinical information, laboratory test indicators and echocardiographic parameters were collected. Serum Corin concentration was measured using enzyme-linked immunosorbent assay (ELISA). The experimental group was divided into grade Ⅱ(31 cases), grade Ⅲ(47 cases) and grade Ⅳ(42 cases) according to the New York College of Cardiology heart function classification system. Serum Corin levels were compared between the experimental group and the control group and among different cardiac function grades. Spearman correlation analysis was performed to evaluate the relationship between serum Corin and brain natriuretic peptide (BNP), D-dimer. ROC analysis was conducted to assess the predictive value of serum Corin in CRF complicated with heart failure and cardiac function classification; Binary Logistic regression was used to construct a multi-index joint prediction model, the joint prediction probability was obtained, and ROC curve was drawn to compare the diagnostic value of serum Corin and BNP in CRF combined with heart failure and the diagnostic value of serum Corin combined with D-dimer and BNP in CRF combined with heart failure.Results:The serum Corin level[2 568.97±477.70 pg/ml vs. 1 727.81±480.60 pg/ml, t=12.47, P<0.001], BNP [700.00(256.00, 2 089.75) pg/ml compared with 88.00 (43.00, 230.00) pg/ml, Z=-9.00, P<0.001], D-dimer [1 150.00(643.00, 1 874.75)μg/L compared with 556.00 (301.00, 865.00)μg/L, Z=-6.57, P<0.001] in chronic renal failure complicated with heart failure group was higher than that in simple CRF group, and the difference was statistically significant. Among patients with CRF complicated with heart failure, serum Corin[2 231.74±311.39 pg/ml vs. 2 562.09±365.30 pg/ml vs. 2 825.57±536.83 pg/ml, F=74.33, P<0.001], BNP [234.00(168.00, 612.00) pg/ml compared with 514.00(260.00, 1 455.00) pg/ml compared with 2 200.00(640.50, 4 682.75) pg/ml, H=29.42, P<0.001], D-dimer [753.00(514.00, 1 280.00) μg/L compared with 1 187.00(590.00, 1 840.00) μg/L compared with 1 603.00(810.00, 3 313.25) μg/L, H=14.98, P<0.001] increased with the increase of cardiac function grade, and the difference was statistically significant. According to Spearman correlation analysis, serum Corin was positively correlated with BNP ( r=0.409) and D-dimer ( r=0.299), P<0.001. According to the ROC analysis, the AUC of serum Corin in the diagnosis of CRF complicated with heart failure and cardiac function grade Ⅱ, Ⅲ, Ⅳ were 0.890(95% CI 0.846-0.935), 0.807 (95% CI 0.728-0.885), 0.911 (95% CI 0.864-0.959), 0.927 (95% CI 0.882-0.972) respectively; the AUC of BNP in the diagnosis of CRF complicated with heart failure was 0.867 (95% CI 0.817-0.916), the AUC of serum Corin combined with D-dimer, BNP combined with D-dimer, serum Corin combined with D-dimer and BNP in the diagnosis of CRF complicated with heart failure were respectively 0.930 (95% CI 0.897-0.962), 0.892 (95% CI 0.847-0.936), 0.952 (95% CI 0.927-0.977). Conclusions:Serum Corin expression is elevated in patients with CRF complicated with heart failure, and the degree of elevation is related to cardiac function grade. Serum Corin has a good diagnostic value for CRF complicated with heart failure and its severity. Serum Corin is expected to become a new biomarker for diagnosis of CRF complicated with heart failure.

Objective To quickly observe the tonic effects of Cervi Colla on enriching blood,strengthening bones and anti-aging in zebrafish model.Methods Glyphosate(Gly)was used to construct the erythrocyte injury model in adult zebrafish,and methotrexate(MTX)was used to construct the hematopoietic function injury model of juvenile zebrafish.Prednisolone(Pred)was used to establish the inhibition model of bone formation in zebrafish larvae.The ocular cell apoptosis model of zebrafish larvae was established by dibutyl phthalate(DBP).Results Cervi Colla could improve the Gly-induced abnormal erythrocyte nucleus in adult zebrafish and promote the expression of hematopoietic factors SCL and GATA1.Cervi Colla improved Pred-induced inhibition of bone formation in juvenile zebrafish,and promoted the expression of osteoblast-related gene ALP and Runx2a.The number of ocular cell apoptosis induced by DBP was decreased,and the expression of anti-apoptotic factor Bcl-2 was promoted.Conclusion Cervi Colla has significant effects on protecting erythrocyte,protecting hematopoiesis,protecting bone formation and anti-apoptosis.These effects may be related to replenish blood,anti-osteoporosis,and anti-aging.This study provides a scientific basis for the clinical application of Cervi Colla,and lays a foundation for further development and application.

ObjectiveTo investigate the in-brace and short-term correction of 3D-printed scoliosis orthoses. MethodsFrom July to December 2021, 36 patients with adolescent idiopathic scoliosis from Ninth People's Hospital, Shanghai Jiaotong University School of Medicine were selected to complete full-length radiographs of the spine before and immediately after wearing the orthosis. They wore the orthosis more than 20 hours a day, and took radiographs six months later. Cobb angle was calculated. They were assessed with Chinese version of the Scoliosis Research Society's outcomes instrument 22 (SRS-22) before wearing and six months follow-up. ResultsThe mean Cobb angle was (22.10±6.29)° before wearing, and it was (7.85±10.90)° immediately after wearing (t = 4.775, P < 0.01) and (14.33±0.74)° six months follow-up (t = 4.189, P < 0.01). The score of functional status of SRS-22 increased six months follow-up (Z = -2.676, P < 0.01). The Cobb angle immediately after wearing correlated with the Cobb angle six months follow-up (r = 0.826, P < 0.05). Conclusion3D-printed scoliosis orthoses can correct the scoliosis satisfactorily, in-brace and in short-term.

ObjectiveTo review the classification of orthopedic insoles, common techniques of 3D printing orthopedic insoles, common materials and their application for flatfoot. MethodsLiteratures were retrieved from PubMed, Web of Science, CNKI and Wanfang Data from 2012 to 2022, and the relevant contents were summarized. ResultsA total of ten studies were finally included, from 5 countries, involving 290 participants, which published from 2019 to 2022. Orthotic insoles were classified as prefabricated, semi-custom, and custom, while custom ones were classified as traditional custom and 3D printed custom. 3D printed orthotic insoles were often made with selective laser sintering, fused deposition modeling (FDM) and PolyJet printing technologies, and commonly used materials included ethylene-vinyl acetate (EVA), polylactic acid, thermoplastic polyurethane, polyamide, and polypropylene. For flatfoot, 3D printed orthotic insoles could improve plantar pressure, relieve foot pain and the combined use of insole posting could control rearfoot valgus. Conclusion3D printed custom insoles can be made more efficiently and accurately than traditional custom insoles. The printing technologies and materials often chosen for 3D printed orthotic insoles are mainly FDM and EVA. 3D printed orthotic insoles is effective on plantar pressure, comfort and foot movement function of flatfoot.

Objective: To explore the effects of red LEDs on the proliferation and osteogenic differentiation of human stem cells from apical papilla (hSCAPs). Methods: hSCAPs were obtained by isolation, culture and flow cytometry in vitro and irradiated with 1, 3, 5, and 7 J/cm2 red LEDs. The proliferation of hSCAPs was detected using a CCK-8 assay. The osteogenic differentiation of hSCAPs was evaluated using alkaline phosphatase (ALP) staining, ALP activity assay and Alizarin red quantitative detection. The effect of 5 J/cm2 red LEDs on the expression levels of the ALP, Runx2, OCN, OPN and BSP genes and proteins was detected by RT-PCR and western blot, respectively. Results: Red LEDs at 1, 3, 5, and 7 J/cm2 promoted the proliferation of hSCAPs (P < 0.05). The effects of red LEDs with different light energies on the proliferation of hSCAPs were different at different time points (P < 0.05). On the 7th and 14th days after irradiation, red LEDs promoted the osteogenic differentiation of hSCAPs, and the effect of 5 J/cm2 red LEDs was the most obvious under osteogenic induction culture conditions (P<0.05). Red LEDs (5 J/cm2) promoted the expression of the ALP, Runx2, OCN, OPN and BSP genes and proteins (P < 0.05). Conclusion Red LEDs promoted the proliferation and osteogenic differentiation of hSCAPs.