Objective To study the generating algorithm of personalized external fixation model based on STL file, so as to realize the fabrication of personalized external fixation through 3D scanning, model generation and 3D printing. Compared with the traditional plaster fixation, the external fixation obtained by the proposed method has the advantages of good adhesion to the external surface of the limb, good gas permeability and light weight. Methods In order to generate a personalized external fixation model, the key generating algorithms of the model were studied. The point cloud file of the residual limb was obtained by a 3D scanner, and then was converted into an STL format file. The triangular patches were processed by cutting, offsetting, triangulating and hollowing to create an external fixation model with good gas permeability and conformable surface that is fully fitted with the body surface. Finally, the external fixation was fabricated by 3D printing. Results Using the improved point offset algorithm, the problem of severe distortion of the point offset at the plane and sharp corners was solved. Using the tangent sort method, the points on the contour ring were sorted clockwise to obtain a triangular profile. The hollowing of the model was achieved by using the typical three-dimensional "cutting tool" mathematical model and the STL file space intersection method. Conclusions The improved model generating algorithm was validated based on a wrist case, and the personalized external fixed fixation model with conformable surface was obtained. It is proved that the proposed model generating algorithm is effective and practical.

3D printing technology has unique advantages and broad application prospect in biomedicine field. In recent years, cell printing, tissue printing, and organ printing technologies h have appeared successively, and drug printing and medical device printing have been realized. For complex surgical cases, surgeons and researchers have explored a surgical program that involves 3D printing technology, and completed many clinical applications including case discussions, surgical simulations and implantation surgeries. These efforts promoted the application and development of 3D printing technology in medical field. The purpose of this paper is to describe the application and research status of 3D printing technology in medical field from the aspects of medical teaching, orthopedic surgery, stomatology, bioprinting, drug printing, medical device manufacturing, etc., and put forward the prospects for future development.

Objective:To explore the correlation between changing trajectories of serum uric acid and the onset of nonalcoholic fatty liver disease (NAFLD).Methods:A longitudinal cohort study. Total of 3 353 subjects who had routine health examination every year from January 2017 to December 2019 in the Health Management Center of the Second Affiliated Hospital of Dalian Medical University and met the inclusion criteria were selected as the research subjects. Four different serum uric acid trajectory groups were determined by using the group-based trajectory model: the low stability group, medium stability group, medium-high stability group and high stability group. During the follow-up to December 2021, the differences in cumulative incidence of NAFLD in different serum uric acid trajectory groups were calculated and compared. Cox proportional hazard regression model was used to evaluate the hazard ratio ( HR) and 95% confidence interval ( CI) of the NAFLD onset in different serum uric acid trajectory groups. The dose-response relationship between baseline serum uric acid and NAFLD was evaluated by a restricted cubic spline regression model. Results:The cumulative incidence of NAFLD in two years was 10.77%, and the cumulative incidence increased with the rising trajectory of serum uric acid, it was the highestin the high stability group ( P<0.05). Compared that in the low stability group, the risk of NAFLD in the other three groups was as follows: 2.24 (95% CI: 1.59-3.14) in the medium stability group, 2.89 (95% CI: 1.92-4.33) in the medium-high stability group and 4.55 (95% CI:2.83-7.31) in the high stability group (all P<0.05). The risk of NAFLD gradually increased with the rising of serum uric acid level, and the cut-off value of serum uric acid for women and men was 260.32 μmol/L and 365.09 μmol/L, respectively. Conclusions:Long-term moderate and high levels of serum uric acid are independent risk factors for the occurrence of NAFLD. With the rising of serum uric acid trajectory, the risk of NAFLD increases. Attention should be paid to the longitudinal change trend of serum uric acid level in the prevention of NAFLD, and it should be controlled within lower level of the normal range.

Objective:To analyze the research hotspots and frontiers in the training of health management talents in China based on knowledge mapping.Methods:The literature related to talent training in health management was retrieved from the databases of CNKI, Wanfang Data, and VIP Journals from 2007 to 2022. The keywords used for retrieval included “health management” “curriculum system” “health manager” “evaluation system” “health service and management” and “talent training”. The time distribution of the literature was analyzed using Excel. Bibliometric analysis was conducted to visually analyze the research in health management talent training, focusing on authorship and collaboration, research institutions, high-frequency keywords, and research hotspots. A knowledge map was created to outline the research framework.Results:A total of 378 journal articles were retrieved. Over the past decade, there has been an overall increasing trend in the number of research publications related to health management talent training. The highest number of articles was published in 2021 (63 articles). In terms of spatial distribution, highly productive authors were relatively concentrated, and research institutions were mostly universities, with Hangzhou Normal University having the highest number of publications (14 articles). The research hotspots included health managers, practice teaching modes, cross-cultivation, and discipline construction. The research frontiers concentrated on talent training modes, health service and management professions, talent demand, and curriculum system construction.Conclusions:In the past decade, health management talents training in China has received more attention and importance. However, there is limited exchange and cooperation among authors and research institutions, and the research hotspots continue to extend in the direction of specialization and diversification. The transformation from vocational education to academic education and strengthening professional construction are the frontiers of the research.