BACKGROUND/AIMS: Physical activity (PA) is associated with a reduced risk of colorectal cancer. Thus, we examined the colon transit time (CTT) according to the physical activity level (PAL) in Korean adults. METHODS: The study subjects were 49 adults: 24 males and 25 females. The subjects used an accelerometer for 7 consecutive days to measure the 1-week PAL. The subjects took a capsule containing 20 radio-opaque markers for 3 days. On the fourth day, a supine abdominal radiography was performed. According to the total activity count of all study subjects, the upper 25%, middle 50% and lower 25% were classified into the high (H), moderate (M) and low (L) physical activity (PA) groups, respectively. RESULTS: The total CTT was significantly longer in the female (25.8 hours) than in the male subjects (7.4 hours) (P = 0.002). In regard to difference on PAL, although there was no significant difference among the male subjects, the right CTT in the female subjects was significantly shorter in H group than in M group (P = 0.048), and the recto-sigmoid CTT was significantly shorter in H group than in L group (P = 0.023). Furthermore, there were significant differences in total CTT between L and M groups (P = 0.022), M and H groups (P = 0.026) and between L and H groups (P = 0.002). CONCLUSIONS: The female, but not male, subjects showed that moderate and high PAL assisted colon transit.
Adult ; Colon ; Colorectal Neoplasms ; Female ; Humans ; Male ; Motor Activity ; Radiography, Abdominal

Duodenal diverticulitis is a rare complication of the duodenal diverticulum. Its rarity is due to the relatively large diameter of the duodenum, which makes the intraluminal flow of sterile liquid duodenal contents fluent. Additionally, nonspecific signs and symptoms of duodenal diverticulitis make it very difficult to diagnose properly. We describe a patient presenting with abdominal pain, nausea, and leukocytosis, with diverticulitis of the third portion of the duodenum caused by the impaction of a foreign body, who was diagnosed and treated with enteroscopy.
Abdominal Pain ; Diverticulitis ; Diverticulum ; Double-Balloon Enteroscopy ; Duodenum ; Foreign Bodies ; Humans ; Leukocytosis ; Nausea

OBJECTIVES: Gastric resection may predispose gallstone formation. However, the mechanism has not been clearly understood. To evaluate the relationship between gastric resection and gallstone formation, we compared gallbladder(GB) motility in gastrectomized patients and control subjects. METHODS: We compared the GB volume and ejection fraction of the 46 gastrectomized patients with 37 healthy controls using real time ultrasonography. RESULTS: GB volume increased significantly in the gastrectomized group in fasting (30.2 13.9 ml). The GB volume after a fatty meal was greater in the gastrectomized group (12.6 6.4 ml) than in the control group (4.3 3.3 ml) (p +ADw- 0.01). A significant reduction of ejection fraction was found in gastrectomized patients (56.9 13.0+ACU-) in comparison with the control group (75.5 16.1+ACU-) (p +ADw- 0.01). The GB ejection fraction had a poor correlation to the postoperative period (r +AD0- 0.232). CONCLUSION: A gastrectomy appears to be a risk factor of GB dysmotility, which may play a major role in gallstone formation in gastrectomized patients.
Adult ; Aged ; Cholelithiasis/ultrasonography ; Cholelithiasis/etiology+ACo- ; Comparative Study ; Eating ; Endosonography ; Fasting ; Female ; Gallbladder/ultrasonography ; Gallbladder/physiopathology+ACo- ; Gallbladder Emptying ; Gastrectomy/adverse effects+ACo- ; Gastrointestinal Motility ; Human ; Male ; Middle Age ; Probability ; Prospective Studies ; Reference Values ; Risk Assessment ; Stomach Neoplasms/surgery+ACo-

Intestinal ischemia is divided into three categories, namely, acute mesenteric ischemia (AMI), chronic mesenteric ischemia (CMI), and colonic ischemia. AMI can result from arterial or venous thrombi, emboli, and vasoconstriction secondary to low-flow states. It is an urgent condition which can result in high mortality rate. The predominant causative factor of CMI is stenosis or occlusion of the mesenteric arterial circulation, and it is characterized by postprandial abdominal pain and weight loss. Surgery is the treatment of choice for intestinal ischemia. However, it has been recently reported that percutaneous transluminal angioplasty with stent placement and/or thrombolysis is an effective therapy in various types of mesenteric ischemia. We report six cases of mesenteric ischemia which were successfully treated by percutaneous angioplasty, and review the literature from South Korea.
Acute Disease ; Aged ; Aged, 80 and over ; *Angioplasty, Balloon ; Chronic Disease ; Female ; Humans ; Intestines/*blood supply ; Ischemia/surgery/*therapy ; Male ; Mesenteric Artery, Superior ; Mesenteric Vascular Occlusion/surgery ; Middle Aged ; Tomography, X-Ray Computed

Intestinal ischemia is divided into three categories, namely, acute mesenteric ischemia (AMI), chronic mesenteric ischemia (CMI), and colonic ischemia. AMI can result from arterial or venous thrombi, emboli, and vasoconstriction secondary to low-flow states. It is an urgent condition which can result in high mortality rate. The predominant causative factor of CMI is stenosis or occlusion of the mesenteric arterial circulation, and it is characterized by postprandial abdominal pain and weight loss. Surgery is the treatment of choice for intestinal ischemia. However, it has been recently reported that percutaneous transluminal angioplasty with stent placement and/or thrombolysis is an effective therapy in various types of mesenteric ischemia. We report six cases of mesenteric ischemia which were successfully treated by percutaneous angioplasty, and review the literature from South Korea.
Acute Disease ; Aged ; Aged, 80 and over ; *Angioplasty, Balloon ; Chronic Disease ; Female ; Humans ; Intestines/*blood supply ; Ischemia/surgery/*therapy ; Male ; Mesenteric Artery, Superior ; Mesenteric Vascular Occlusion/surgery ; Middle Aged ; Tomography, X-Ray Computed

Spontaneous arterial bleeding has been reported rarely. In a patient consuming heavy amounts of alcohol with alcoholic liver cirrhosis, spontaneous bleeding can be evoked by thrombocytopenia, altered platelet function, and shear stress on fully dilated arteries by portal hypertension. Alcohol consumption itself can also predispose a patient to bleeding by influencing the aggregation and activation of platelets, and altering the coagulation and fibrinolysis pathway. All of these mechanisms could cause patients with alcoholic liver cirrhosis to bleed spontaneously; however, conditions inducing peripheral arterial bleeding are very rare. Here, we report three cases of spontaneous arterial bleeding in patients with liver cirrhosis consuming heavy amounts of alcohol. All of the patients bled without any physical trauma, and the involved arteries were the intercostal arteries in two cases and a gastroduodenal artery in the other case. The patients were treated by angiographic embolization. One expired due to recurrence of arterial bleeding despite repeated angiographic embolization and massive transfusion.
Alcohol Drinking ; Arteries ; Blood Platelets ; Embolization, Therapeutic ; Fibrinolysis ; Hemorrhage* ; Humans ; Hypertension, Portal ; Liver Cirrhosis ; Liver Cirrhosis, Alcoholic* ; Recurrence ; Thrombocytopenia

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.