Xiao Zhi Ling Injection is a Chinese herbal aqueous solution of praeparatum which is mainly made of gallnut and alum, it can make a " strengthening body resistance " treatment in polytype tumors, mainly through promoting apoptosis of tumor cells, destructing tumor cells, inhibiting tumor growth, enhan-cing immunity of organism and so on, the clinical effect is certain, with the development of theory and tech-nology in tumor molecular biology, it has become the core of future research that how to further explore Xiao-Zhi-Ling injection to promote tumor cell apoptosis by impacting on related genes, and its lucubrate inevitably provide new hope in gene therapy of cancer.

Response surface methodology (RSM) based on a three-level three-factor Box-Behnken design of experiments was used to optimize the extracellular polysaccharide content and the mycelium biomass by submerged cultivation using Pholiota squarrosa AS 5.245. The critical factors selected for the investigation were temperature, time of cultivation and volume of medium, based on the results of our previous Plackett-Burman design. The objectives of this present work were to locate optimum levels of these process parameters, and to find out interactions among them for enhancement of the yield of extracellular polysaccharide and mycelium biomass. By solving the regression equation and also by analyzing the response surface contour plots, the optimal process conditions were determined: under conditions of temperature, 28.07℃; cultivation time, 8.79 d and volume of medium, 68.51 mL, the prediction of extracellular polysaccharide content (EPC) by Pholiota squarrosa AS 5.245 was 1062.69 ?g per milliliter of fermentation liquor. While cultivation temperature, time and volume of medium were 27.60℃, 9.42 d and 54.20 mL respectively, the mycelium biomass expressed as dry cell weight (DCW) was 11.32 mg?mL -1. In order to simultaneously obtain the maximum yield of EPC and DCW, the above conditions would be located at 27.62℃, 9.19 d and 64.10 mL. In these conditions, the maximum predicted yield of EPC and DCW were found to be 1050.64 ?g?mL -1 and 11.10 mg?mL -1, respectively. These predicted values were also verified by validation experiment.

Identification and validation of a new target is one of the most important steps for new antituberculosis (TB) drug discovery. Researches have shown that Mycobacterium tuberculosis (Mtb) encodes 20 CYP450 enzymes which play important roles in the synthesis and metabolism of lipid, cholesterol utilization, and the electron transport of respiratory chain in Mtb. With the critical roles within the organism as well as the protein structures of six Mtb CYP450 enzymes being clarified, some of them have been highlighted as potential anti-tuberculosis targets. In this paper, the phylogenetic analysis, the structural features, and the enzymatic functions of Mtb CYPs, as well as the mechanism of interactions with selective inhibitors such as azole antifungal agents for the CYPs have been reviewed and summarized. The druggability of the CYPs has also been analyzed for their further utility as targets in high throughput screening and rational design of more selective inhibitors.
Antitubercular Agents ; chemistry ; pharmacology ; Azoles ; chemistry ; pharmacology ; Cytochrome P-450 Enzyme Inhibitors ; chemistry ; pharmacology ; Cytochrome P-450 Enzyme System ; genetics ; metabolism ; Drug Delivery Systems ; methods ; Drug Discovery ; Humans ; Mycobacterium tuberculosis ; drug effects ; enzymology ; genetics ; Phylogeny ; Tuberculosis ; drug therapy ; microbiology

Objective To investigate the effects of KLT on apoptosis of HepG2 cells and expression of Bcl-2 and Capase-8. Methods The cell fine HepG2 was induced by diverse density of KLT, and HepG2 cell was collected respectively after induction of 12 h, 24 h, 48 h. The control group was installed simulta-neon]y. The cell apoptosis and the expression of Bcl-2 and Caspase-8 were detected by flow cytometry (FCM). Results KLT can induce the apoptosis of HepG2 cell significantly, and the longer time past, the more apoptosis of HepG2 was. KLT can increase the expression of Caspase-8, but ineffective to Bcl-2. Con-clusion KLT can significantly induce the apoptosis of HepG2 cell through regulating the expression of Caspase-8.

Objective To investigate the synergistic effect of 11 β-hydroxysteriod dehydrogenase (11 β-HSD1) and S100A16 on the differentiation of3T3-L1 preadipocytes and its mechanism.Methods Lentiviral vectors PLJM1-11β-HSD1 and PLJM1-S100A16-GFP were respectively constructed and co-transfected into 3T3-L1 preadipocytes.The cell strains expressing 11 β-HSD1/S100A16 were screened with 2.5 μg/ml puromycin for two weeks.Western blot was employed to verify the lentiviral carrier transfection effects.The expressions of marker genes related to the adipocyte differentiation were detected by mean of realtime PCR.Oil red O staining was used to observe the lipid droplet accumulation and the content of triglyceride was measured after differentiation of preadipocytes.The effect of 11β-HSD1 and S100A16 on PPARγ promoter activity was detected by luciferase reporter gene.Results Compared with the empty vector group,the expressions of 11β-HSD1 and S100A16 protein in the lentivirus cotransfected 3T3-L1 cell strain were significantly higher.After 3T3-L1 cell strain co-expressing 1 1β-HSD1 and S100A16 was induced to differentiate for 8 days,the lipid droplets accumulation and triglyceride content were siginificantly increased,along with increased expressions of adipocyte differentiation marker genes such as PPARγ,CCAAT/enhancer binding protein α,lipoprotein lipase,fatty acid synthase,and adipocyte fatty acid-binding protein,in comparison with 11 β-HSD1 or S100A16 overexpression.The result of reporter gene indicated that 11 β-HSD1/ S100A16 enhanced PPARγ promoter activity.Conclusions 11β-HSD1 and S100A16 may jointly promote the differentiation of 3T3-L1 preadipocytes through a synergistic effect on PPARγexpression and play a critical role in the development of obesity.

Objective To compare the changes in serum levels of high sensitive C-reactive protein (hs-CRP)and uric acid(UA)before and after atorvastatin treatment for the patients with both essential hypertension and hypercholesterolemia,and to evaluate its effects on blood pressure and left ventricular remodeling.Methods One hundred and twenty-six hypertensive patients complicated with hypercholesterolemia were randomized into group A with amlodipine 10 mg/d(n = 65)and group B with amlodipine 10 mg/d plus atorvastatin 20 mg/d(n = 61),for three months continuously.Serum levels of total cholesterol(TC),low-density lipoprotein-cholesterol(LDL-C),high-density lipoprotein-cholesterol (HDL-C),triglyeerides(TG),hs-CRP and UA,as well as blood pressure,were determined for both groups before and after treatment.Left ventricular posterior wall thickness(LPWT)and interventricular septum thickness(IVST)were measured by echocardiography and left ventricle mass index(LVMI)was calculated.Results Serum levels of TC,LDL-C,HDL-C,TG,hs-CRP and UA decreased significantly in gr6up B after three-month treatment with atorvastatin,while serum level of HDL-C increased significantly. And,systolic and diastolic blood pressure reduced in both groups,but significantly lower in group B than those in group A,after treatment(P

Objective To develop an interlocking-style vascular shunt device for the treatment of distal limb ischemia resulting from vascular disconnection and defect.Methods A one-way interlocking buckle was designed with the space between the clamping teeth being 0.5 mm,which prevented the device from moving backwards and fixed the vessel and shunt tube conveniently.The interlocking buckle combined with silicone tube was used to connect the two ends of the defected vessel,which was compared with conventional method by suture ligation and silicone tube by the tests on vessel bursting pressure and tensile biomechanics.Results The vessel repaired with the developed device behaved better than that by the conventional method in the tests on vessel bursting pressure and tensile biomechanics (P＜0.05).Conclusion The vascular shunt device can be used for the treatment of distal limb ischemia resulting from vascular disconnection and defect,and thus facilitates the vascular graft in rear hospital after evacuation.

Adult ; Disease Outbreaks ; Humans ; Metapneumovirus ; Paramyxoviridae Infections ; epidemiology ; Respiratory Tract Infections ; epidemiology ; virology ; Students

Objective To explore the current status of home-based rehabilitation of patients who accepted reconstruction of anterior cruciate ligament in the early stage,so as to analyze its correlation with their joint function recovery in early.Methods Fifty-four consecutive patients underwent arthroscopic reconstruction of anterior cruciate ligament were recruited.A self-designed questionnaire was used to collect demographic data,the implementation of rehabilitation,concerns about the exercises,and function status of the knee were observed in outpatient after their surgeries two weeks.Results Only 25 patients (46.3％) had a satisfied function recovery of the knee. Control rate of muscle activity was 33.3％,and control rate of range of movement exercises was 29.6％. Varying degrees of concern to rehabilitation was founded in patients,and the most concern was afraid of pain (55.6％),improper practice due to lacking of guiding (51.9％),hang on due to boring during rehabilitation process (37.0％). Early functional recovery of patients was influenced by the control rate of rehabilitation.Conclusions Current status of early functional recovery of patients who accepted reconstruction of anterior crnciate ligament in the early stage is far from satisfied.More attention should be paid to home-based rehabilitation.It should be improved by strengthening the guidance of rehabilitation in-hospital and follow-up in outpatient.

Our previous work has indicated that mycelium growth and exopolysaccharide accumulation in submerged fermentation by Pholiota squarrosa (Pers. ex Fr.) Quel. AS 5.245 are strongly affected by many internal and external factors, including medium constituents and fermentation conditions. In this study, we use an effective two-phase statistical approach to enhance exopolysaccharide production. In the first phase, Plackett-Burman design was undertaken to evaluate the effects of the twenty factors, i.e., glucose, fructose, maltose, yeast extract, tryptone, K2HPO4, KH2PO4, (NH4)2SO4, NaNO3, FeSO4, MgSO4, MnCl2, ZnCl2, FeCl3, CuSO4.5H2O, vitamin B1, initial pH, the temperature, the medium volume and the duration, to the fermentation. By regression analysis, yeast extract, tryptone, fructose, MgSO4, MnCl2, initial pH and temperature were found to be important for exopolysaccharide production, while glucose, maltose, NaNO3, ZnCl2, vitamin B1, the duration and the volume are important to the mycelium biomass. In the second phase of the optimization process, a response surface methodology (RSM) was used to optimize the above critical internal factors, and to find out the optimal concentration levels and the relationships between these factors. Based on the results of the first phase, a five-level six-factor (yeast extract, fructose, MgSO4, maltose, ZnCl2 and initial pH) central composite rotatable design (CCRD) was employed. By solving the quadratic regression model equation using appropriate statistic methods, the optimal concentrations for obtaining 876.32 microg exopolysaccharide per milliliter of fermentation liquor were calculated as: 6.0g/L yeast extract, 11.5g/L fructose, 0.5g/L MgSO4, 9.6g/L maltose, 38.6mg/L ZnCl2 and with the initial pH 5.3. The experimental data under various conditions have validated the theoretical values.
Culture Media ; Fermentation ; Fructose ; metabolism ; Hydrogen-Ion Concentration ; Maltose ; metabolism ; Pholiota ; growth & development ; metabolism ; Polysaccharides ; analysis ; biosynthesis ; Temperature