Objective To investigate the technological feasibility and short-term efficacy of 125I seeds implantation in head and neck cancer. Methods Thirty patients with head and neck recurrent cancer were treated with 125I seeds interstitial brachytherapy. The operation was performed under local anesthesia and the 125I seeds were implanted under the guidance of ultrasonography. The seed needles were implanted parallelly to each other, at 1～1.5 cm apart. The Mick applicator was used to implant seed at 1 cm interval. The radioactive activity per seed ranged 0.40～0.70 mCi, and the matched peripheral dose (MPD) was 90～160 Gy. The number of 125I seed implanted per lesion was 3～84 (median, 24). Ten patients with a seed radioactive dose

Objective　To evaluate the expression of MAGE-1 gene in esophageal carcinoma and determine whether esophageal carcinoma patients should be eligible for MAGE-1 antigen-based vaccine therapies． Methods　 MAGE-1 mRNA expression in esophageal carcinoma was assessed by reverse transcription and polymerase chain reaction amplification． The PCR products were then digested by restriction endonucleases and inserted into the pET-30a(+) vector． The sequence of the inserted gene fragment was confirmed by DNA sequence analysis． Results　Out of the 30 esophageal carcinomas studied, 43% of the esophageal carcinomas tissues expressed MAGE-1 gene and no expression was found in matched adjacent normal esophageal mucosae． The entire cDNA of the gene was cloned． Conclusion　Owing to the high frequency of MAGE-1 gene expression in esophageal carcinoma and MAGE-1 antigen can be recognized by cytolytic T lymphocytes when presented by class-I HLA molecular, a large proportion of these patients might be suitable candidates for immune therapy involving tumor specific antigens encoded by MAGE-1 gene．

Objective To compare the preoperative and postoperative dosimetric results of radioactive seed implantation assisted by 3D printing template in the treatment of chest malignant tumor, and to examine the effect this technique on the precision of radioactive seed implantation.Methods A total of 21 patients who received 3D printing template-assisted CT-guided 125I seed implantation for chest tumors in 2016 were included in the study.The prescribed dose of the treatment was 110-180 Gy.Preoperative planning, individual template production, and puncture and seed implantation were performed in all patients, and the postoperative dosimetric results were then compared with the preoperative plan by assessing various dosimetric parameters including D90, MPD, V100, V150, CI, EI, and HI of gross tumor volume (GTV), D2cc of the spinal cord and aorta, and Dmean and V20 of the affected side of the lung.Statistical analysis was performed using the Wilcoxon non-parametric test.Results A total of 21 3D printing templates were designed and produced.The mean GTV volume (preoperative) of all patients was 77.1 cm3, and the mean number of implanted seeds was 68.In addition, the mean D90 of the postoperative GTV was 147.3 Gy.There were slight changes in the dosimetric parameters after treatment (P>0.05).Conclusions 3D printing template allows for accurate positioning and implantation of radioactive seeds during the treatment of chest tumor.Postoperative dosimetric parameters were consistent with those in the preoperative planning, indicating that the 3D printing template provides high precision for the treatment of chest tumor.

Objective: To compare the dosimetric data between the preoperative plans and postoperative verification in personalized 3D printed template-assisted and computed tomography (CT) image-guided 125-iodine seed implantation for supraclavicular metastatic tumor, and to evaluate the accuracy and feasibility at the dosimetry level.Methods: A total of 14 patients with supraclavicular metastatic tumor (including 15 lesions) who received 3D printed template assisted and CT image-guided 125-iodine seed implantation in Department of Radiation Oncology of Peking University Third Hospital from January to September 2016 were enrolled.There were 8 males and 6 females, aged from 46 to 79 years (mean age: 59.9 years).The Karnofsky performance score (KPS) was from 60 to 90 (median of 80).There were one patient who had not received radiotherapy before, and one patient had received radiotherapy, but the dose was unknown.The remaining 12 patients had received radiotherapy, with the median of 60 Gy (20-70 Gy), and one of them with the dose unknown.All the patients underwent preoperative enhanced CT scan, preoperative planning design, 3D printing template, puncture and particle implantation, the prescription dose from 110 Gy to 150 Gy.Comparisons of the dosimetric parameters between the postoperative verification and preoperative plans were made by paired t-test.The dose parameters inclu-ded D90, V100, V150, V200, matched peripheral dose (mPD), conformal index (CI), and external index (EI).The agreement was evaluated between the preoperative planning and postoperative actual dose parameters using Bland-Altman analysis.Bland-Altman plot showed the difference against the average of preoperative planning and postoperative actual dose parameters with limits of agreement (LoA) (broken lines).Results: The difference of all the data between pre-and postoperation, included D90, V100, V150, V200, mPD, and CI, which was not statistically significant (P>0.05).EI was statistically significant (P<0.05).There was poor consistency of D90, V100, V150, V200, and mPD, but better consistency of CI and EI.Conclusion: Personalized 3D printed template-assisted and CT image-guided 125-iodine seed implantation for supraclavicular metastatic tumor is accurate and feasible.

Objective To compare the pre-and post-operative tumor target volume and to examine the consistency in physical dosimetric parameters of organs at risk (OAR) following 3D-printed coplanar template (3D-PCT)-assisted and CT-guided radioactive seed implantation.Methods The 3D-printed coplanar template was designed using a computer software, and the coordinate system was established where the center was used as the basis for setting the x axis and y axis.Crosses defining the center of treatment were drawn on the patient''s body and matched with the corresponding central point, x axis, and y axis of the coplanar template.3D-PCT-assisted and CT-guided radioactive seed implantation was performed based on the pre-operative plan, and the pre-operative, operative, and post-operative plans were designed to evaluate the target tumor volume and the normal dose received by the tissues.In addition, dosimetric parameters, including D90(minimum dose received by 90% of the gross target volume), V100, V150, V200(percentage of GTV that received 100%, 150%, and 200% of the prescribed dose, respectively), minimum peripheral dose (MPD), conformal index (CI), external index (EI), and homogeneity index (HI) in the pre-operative and post-operative plans were also assessed and compared using the Wilcoxon test. Results Fourteen patients treated in our institution from August to October, 2016 were included in this study. The median age of the patients was 61.5 years, and the median Karnofsky Performance Scale score was 80. A total of 14 lesions from the 14 patients were treated by seed implantation in the neck (n=4), chest (n=3), abdomen (n=5), and pelvis (n=2). Of the 14 patients that underwent implantation, 8 had previously received radiation therapy, and 6 had not received radiation therapy. Dosage optimization was performed for all patients during the operation. The median activity of the implanted seeds was 0.625 mCi (0.55-0.75 mCi,1 Ci=3.7×1010 Bq), and the preoperatively planned median number of needling and implanted seeds were 9(4-34) and 45.5(10-162), respectively. However, the actual median number of needling and implanted seeds were 9.5(4-34) and 45.5(10-162), respectively. Dosimetric analysis showed that there were no significant changes in tumor volume (P=0.135), D90(P=0.208), MPD (P=0.104), V100(P=0.542), V150(P=0.754), V200(P=0.583), CI (P=0.426), EI (P=0.326), and HI (P=0.952) after implantation. Conclusions 3D-PCT guidance and dosage optimization can result in good consistency between pre-and post-operative plans for radioactive seed implantation. 3D-PCT is a convenient and cheap technique suitable for large-scale clinical application.

Objective To establish a model for the calculation of biologically effective dose (BED) and EQD2 (Equivalent dose in 2 Gy fractions) in radioactive seed implantation brachytherapy.Methods The BED formula for EBRT(external beam radiotherapy) and for continuous low dose-rate irradiation established under the L-Q model were introduced.The EDQ2 formula for the continuous low dose-rate irradiation (radioactive seed implantation) was established according to the definition of EQD2 and the formula of BED.The α/β values of common tissues and the Tr 1/2 values reported in the literature were summarized.The EDQ2 formula were further simplified by using the actual values.The empirical formula of EDQ2 for early reaction tissues and late reaction tissues were proposed,named as Wang-Peng empirical formula.EDQ2≈ (10/12) D (Wang-Peng Formula 1) was fit for early response tissue,and EDQ2≈ D/2 (Wang-Peng Formula 2) for late reaction tissues.Further examples on the clinical applications of the proposed formula were given,including primary lung cancer,supraclavicular lymph node metastasis of esophageal cancer and celic lymph node metastasis of cervical carcinoma.Results According to the Wang-Peng empirical formula,the EDQ2 of the late reaction tissue adjacent to the tumor was only about half that of the tumor tissue,so the radioactive seed implantation brachytherapy naturally protected the late reaction tissue by the biological equivalent dose.The actual calculation,showed that the empirical formula of early reaction tissue was more accurate,but the empirical formula of late reaction orgtissue was less inaccurate and could only be roughly estimated.Conclusions The BED calculation formula introduced here and the set of EQD2 calculation formula and Wang-Peng empirical formula established here were theoretically feasible and could be used for the conversion and superposition between the physical dose of radioactive seed implantation brachytherapy and the external irradiation dose.But it should be careful to apply the formula,pay attention to the default conditions,and carefully interpret the calculated results.

Objective To identify-and study a monoclonal antibody (McAb) against pancreatic cancer stem cell in vitro,as well as to provide candidate antibody-drug for cancer stem cell-targeted therapy of pancreatic cancer.Methods Cell culture in serum-free medium and PKH26 staining were used to determine the existence of cancer stem cell in PANC-1 cell line.Flow cytometry was used to detect the expression of CD24 and CD44 in PANC-1 cells and sphere cells,Immunofluorescence was used to detect the expression of CD24 and antigen recognized by 15D2.The effects of 15D2 on self-renewal,proliferation and chemosensitivity to gemcitabine of PANC-1 parent or sphere cells were identified by serum-free suspension culture and CCK-8 assay,Immunohistochemistry was applied to detect the level of antigen recognized by 15D2 in cancer and adjacent tissues.Results PANC-1 cells could survive,proliferate and form sphere cells in serum-free medium.The sphere-forming rate was (2.5±0.5) ％.The percentage of CD44+ CD24+ cells population in sphere cells increased by 11.4 folds compared to PANC-1 cells,in which single nearly 97 ％ CD24+ cells was CD44+ CD24+ cells.Therefore,CD24+ was selected for cancer stem cell marker in PANC-1 in this study.The two-color immunofluorescence assay showed that 15D2 could recognize cells which was also stained by CD24.In vitro functional experiments demonstrated that 15D2 significantly suppressed the sphere formation of PANC-1 cells,with the inhibitory rate being 30.4 ％.Meanwhile,the combination of 15D2 and gemcitabine can significantly attenuate the growth of PANC-1 sphere cells.The IC50 was 0.10 μmol/L in 15D2+gemeitabine group,and 0.39 μmol/L in mlgM+gemcitabine group,Immunohistochemical results showed that the antigen recognized by 15D2 was greatly expressed in about 76.9 ％ (11/13) human pancreatic cancer tissues and hardly detected in adjacent normal tissues (10.0 ％,1/10).Conclusion McAb 15D2 can inhibit self-renewal and drug-resistance of pancreatic cancer stem cell in PANC-1 cell line,and it might become a candidate drug for target pancreatic cancer stem cell treatment.

Objective To evaluate the clinical value of autoantibody spectrum against ovarian cancer associated antigens combine CA125 in detecting and monitoring ovarian cancer. Methods Circulating IgG, IgM autoantibodies against ovarian cancer associated antigens which included TM4SF1, C1D,TIZ, OV-142,FXR1 and OV-189 were measured by indirect ELISA in serum from 126 patients with ovarian cancer (prior treatment), 42 patients with benign ovarian masses, 142 healthy women. Cut off value of IgG, IgM autoantibodies were determined by receive operating characteristic (ROC) curve. CA125 was measured in serum by immunoradiometric assay (IRMA). We evaluated the clinical value of combining multiple autoantibodies (autoantibody spectrum ), combining autoantibody spectrum with CA125 by binary logistic regresion. The positive ratio of autoantibody spectrum in serum (prior and post treatment ) of 24 synchronization patients with ovarian cancer was analyzed to evaluate the value in monitoring state of illness.Results Our data indicated that serum contains IgG, IgM autoantibodies against ovarian cancer associated antigens. The positive ratio of IgG autoantibodies in serum from ovarian cancer patients and cancer-free patients were 34. 1% - 47. 6% and 13.0% - 19. 0%, respectively ( P ＜ 0. 05 ). The positive ratio of IgM autoantibodies in serum from ovarian cancer patients and cancer-free patients were 39. 7% - 53.2% and 12. 0% -33.2%, respectively (P ＜0. 05). The positive ratio of IgG autoantibodies against FXR1 and IgM autoantibodies against TIZ,FXR1 and OV-189 in early stage ( Ⅰ - Ⅱ ) ovarian cancer(55.3% ,63.8%,61.7% and 66. 0% ) were significantly higher than those in advanced ( Ⅲ - Ⅳ )ovarian cancer( 34. 2%,39. 2% ,26. 6% ,45.6%; all P ＜ 0. 05 ). Combining five autoantibodies ( TM4SF1 IgG, TM4SF1 IgM, C1D IgG, FXR1 IgG and TIZ IgM ) showed significantly improved sensitivity (75.4%, P ＜ 0. 05 ), lower specificity (78. 3% ,P ＜ 0. 05 ) and similar accuracy (77. 1%, P ＞ 0. 05 ) in detecting ovarian cancer compared to those of CA125 (61.1% ,88.0% ,77. 1% ). But the autoantibody spectrum showed significantly improved sensitivity in classifying early stage (76. 6% ), compared to those of CA125 (51.1% ,P ＜ 0. 05 ).Combining autoantibody spectrum with CA125 showed significantly improved sensitivity ( 85.7% ), specificity (90. 8% )and accuracy (88.7%) in detecting ovarian cancer compared to those of autoantibody spectrum alone ( all P ＜ 0. 05 ), while CA125 ( 61.1%, P ＜ 0. 05; 88. 0%, P ＞ 0. 05; 77. 1%, P ＜ 0. 05 ). The positive ratio of combine the autoantibody spectrum with CA125 was significantly lower in 24 post-treatment serum (42%) compared to the pairing prior treatment serum ( 88%, P ＜ 0. 05 ). Conclusion Combining the autoantibody spectrum against ovarian cancer associated antigens with CA125 can improve sensitivity,specificity and accuracy in detecting early ovarian cancer and may be used to monitoring state of illness.

Objective To investigate the value of autoantibody of breast cancer susceptibility 1 associated RING domain (BARD1) splice variant (OV-142) in detection of ovarian cancer.Methods We cloned OV-142 gene into plasmid pET-30b(+).The recombinant protein of OV-142 was expressed in pET30b(+) system and purified. The autoantibody of OV-142 was detected by indirect enzyme-linked immunosorbent assay (ELISA).Results We successfully constructed the recombinant plasmid of OV-142.The recombinant protein was expressed in pET-30b(+) system and purified.The purification rate of the recombinant protein was up to 90%.The relative amount of autoantibody of OV-142 detected by indirect ELISA was analyzed by receiver operating characteristic curve (ROC) and the cutoff value was determined.Combination of the autoantibody IgG of OV-142 and CA125 was analyzed by logistic regression. The sensitivity,specificity and accuracy was 71.4%,89.1%,and 81.9%,respectively,which were higher than IgG (41.3%,84.2%,66.8% ) and CA125( 61.1%,88.0%,77.1% ) when used alone each.Conclusions OV-142 is a splice variant of BARD1.It may be a potential immunotherapy target of ovarian cancer.Detection of autoantibody of OV-142 is a potent complementary tool of CA125 in ovarian cancerdiagnosis.

Objective To investigate the acute side effect of 3D printing individual non-coplanar template for 125I seed implantation in head and neck recurrent/ metastatic carcinoma.Methods Between January 2016 and December 2016,42 patients of local recurrent malignant tumor of head and neck received 3D printing guide plate assist radioactive seeds implantations,and included in the study.The tumor volume ranged from 2.4 to 102.8 cm3 (median 28.6 cm3).The prescribed dose is 110-160 Gy,and the seeds activity were 0.34 to 0.70 mCi (1 Ci =3.7 × 1010 Bq).All patients carried out preoperative planning design,individual guide plate production,seed implantation,postoperative dose assessment,and followup.The side effects of skin,mucous membrane,blood and spinal cord were statistically analyzed.Results All patients were operated successfully.The follow-up time was 4-14 months (median 8.5 months).There were no adverse reactions at grade three or above.Three patients had grade one skin reaction.One patient experienced grade one mucosal reaction,two experienced grade two mucosal reactions.The skin response was correlated with the dose of the skin (x2 =7.067,P =0.032).No hematologic toxicity or radiation myelopathy was observed and no seed displacement was found.Conclusions 3D-printing guide plate can provide good accuracy for positioning and direction.For local recurrent malignant tumor of head and neck,there were no obvious adverse reactions and the operation was simple and the dosage was accurate.