The basic information,including the number of applications,dosage forms,indications,structure types,purification processes,medicinal materials,period of clinical trials,and dealing conclusions for registration of active fractions in Chinese materia medica(CMM) during 2004-2007,was analyzed.The numbers of registration for clinical trials and applications for production during 2004-2007 were 202 and 23,respectively.It could be found that the numbers of registrations of active fractions in CMM declined obviously since 2005 and the dosage form,indication,and purification process of those applications showed a trend of the relative concentration.From aspect of the stage conclusions,the rate of "not to approve" of applications for clinical trials and production were 48.0% and 8.7%,respectively.So,it could be concluded that the studies on the selection of dosage form,indication,and purification process of active fractions in CMM should be further strengthened.

Safety,efficacy and predictability of corneal refractive surgery have greatly improved as the advancement of the operating technology and equipment.Laser corneal refractive surgeries include excimer laser photorefractive keratectomy (PRK),laser-assisted subepithelial keratomileusis (LASEK),laser in situ keratomileusis (LASIK) and small incision lenticule extraction (SMILE).No matter what kind of operation method,its ultimate goal is to increase the comfort level and improve visual quality.With the surgery skills improving,retinal drug use is a primary factor affecting the safety of laser corneal refractive surgery.Ophthalmologists should strictly master indications and administration of commonly used drugs in postoperative eyes to prevent drug-related eye diseases.In addition,eye doctors also should understand the postoperative complications and topical administration of eye drops.It is important to pay attention to the standard surgical operation and rational drug use after corneal refractive surgery,which can enhance the visual quality and comfort and reduce the complication.

The all-in-one femtosecond laser corneal refractive surgery,especially small incision lenticule extraction (SMILE),has gained more and more attention in clinic,because of its small incision,“no flap” and corneal biomechanical stability advantages.However,like any other kind of corneal refractive surgery,the all-in-one femtosecond laser refractive surgery not only exists its clinical advantages,but also has its limitations.It is very important to put into perspective clinical advantages and limitations of all-in-one femtosecond laser corneal refractive surgery.

Objective To evaluate the anatomical basis and techniques in laparoscopic liver resections. Methods Entered the study there were 16 patients with both their lesions located at liver margin, or the surface of the right liver, or left liver and their liver functions classified as Child B or above, including 8 cases of primary liver cancer, 3 cases of liver hemangioma, 1 case of cholangiocarcinama, 1 case of hepatic adenoma, 1 case of focal nodular hyperplasia, 1 case of liver abscess and 1 case of infected liver cyst. The procedures were performed, via 4～6 epigastric ports, by using electriccautery, ultracision or endo-cutter for transecting liver and by titanic clip or medical albumin glue for dealing with the cut surface. Results Laparoscopic liver resection was completed under pneumoperitoneum in 16 cases (18 lesions), including 8 cases of local liver resection and 8 cases of anatomical left liver resection. The operation time was (206?75) min and the blood loss was (354?282) ml. An intraoperative blood transfusion of 800 ml was required in 2 cases because of a blood loss of 1000 ml. The abdominal drains were left for (2～4) days and no bile leakage, bleeding or other complications happened. The postoperative hospital stay was (5.8?1.6) days. Conclusions Proper dealing with hepatic portal vessels is the key to the laparoscopic liver resection. In order to effectively control the bleeding during the partial hepatectomy or left hemihepatectomy, it is crucial to fully dissect the sub-grade hepatic portal vessels.

Objective To optimize the RP-HPLC procedure for the determination of aristolochic acid. Method Different extraction solvents and methods have been screened to get the most efficient way for sample preparation. The influence of different mobile systems on quantitation were compared to choose an approprate mobile system for determination. Besides,the minimum limits of different detecting waves were measured to give the method to detect trace amount of aristolochic acid. Result Refluxing with 70% methanol was better than other ways in sample preparation. Both methanol-1% acetic acid (70∶30) solution and 0.3% ammonium carbonate solution (pH=7.5)-acetonitrile (75∶25) with wavelength of 250 nm and 319 nm can be used for quantitation while 0.3% ammonium carbonate solution (pH=7.5)-acetonitrile (75∶25) with wavelength of 224 nm for trace detection. The minimum detectable amount was 0.02 ng. Conclusion The method established can be applied to determinate aristolochic acid and detect trace amout exactly.

In an anti-thrombotic pressure circulatory device, relays and solenoid valves serve as core execution units. Thus the therapeutic efficacy and patient safety of the device will directly depend on their performance. A new type of testing system for relays and solenoid valves used in the anti-thrombotic device has been developed, which can test action response time and fatigue performance of relay and solenoid valve. PC, data acquisition card and test platform are used in this testing system based on human-computer interaction testing modules. The testing objectives are realized by using the virtual instrument technology, the high-speed data acquisition technology and reasonable software design. The two sets of the system made by relay and solenoid valve are tested. The results proved the universality and reliability of the testing system so that these relays and solenoid valves could be accurately used in the antithrombotic pressure circulatory equipment. The newly-developed testing system has a bright future in the aspects of promotion and application prospect.
Equipment Design ; Humans ; Monitoring, Ambulatory ; instrumentation ; Pressure ; Reproducibility of Results ; Software ; Thrombosis ; diagnosis

Background Recently,small incision lenticule extraction (SMILE) procedure is used to correct myopia.The clinical safety and efficiency of SMILE have been approved,but its predictability to corneal ablation depth is brought into focus.Objective This study was to compare the predictability of ablation depth in central cornea between SMILE and femtosecond laser-assisted in situ keratomileusis (FS-LASIK) for myopia.Methods A nonrandomized controlled clinical study was performed.Two hundred and seventy eyes of 135 myopic patients who were going to receive corneal refractive surgery were included in Beijing Tongren Hospital from October 2015 to May 2016.SMILE and FS-LASIK were performed on 138 eyes of 69 patients and 132 eyes of 66 patients matched in demography respectively under the informed consent.Central corneal thickness was measured by RTVue FD-OCT before and 1 week after surgery.The refractive power,actual ablation depth (difference of central corneal thickness before and after surgery) and central corneal cutting error (difference between theoretically expected ablation depth and real ablation depth) were intergrouply compared,and the correlation of real ablation depth with theoretically expected ablation depth was assessed.Results No significant difference was found in spherical power,astigmatic power and spherical equivalent after surgery between SMILE group and FS-LASIK group (t =-1.826,-1.405,-1.420,all at P＞0.05).The actual ablation depth was (76.96± 15.27)μm in the SMILE group,which was significant lower than (96.76± 16.52) μm of theoretically expected ablation depth (t =-23.016,P ＜ 0.01);however,there was no significant difference in the FS-LASIK group between actual and expected ablation depth ([77.92 ± 18.69] μm versus [77.42± 15.60] μm) (t =-0.604,P =0.547).The central corneal cutting error was (20.55 ± 8.51) μm in the SMILE group and (7.17±5.97) μm in the FS-LASIK group,showing a significant difference between them (t=14.950,P＜0.01).The positive linear correlations were seen between actual and expected ablation depth in both SMILE group and FS-LASIK group (r=0.799,0.867,both at P＜0.01).The actual ablation depth was increased over expected ablation depth,with the regression equations of Y=3.892+0.749X in the SMILE group and Y=3.443 + 0.957X in the FS-LASIK group.Conclusions The actual corneal ablation depth is less than expected corneal ablation depth in SMILE procedure,while in FS-LASIK procedure,the actual corneal ablation depth appears to be consistent with the expected one,inferring a good predictability in corneal ablation depth in FS-LASIK surgery.

Background Laser in situ keratomileusis (LASIK) for myopia and/or myopic astigmatism still is one of primary surgeries.Femtosecond laser (FS)-LASIK offers several advantages over microkeratomes for flap creation including better safety,reproducibility,and predictability.However,the visual performance after FS-LASIK is of high clinical concern.Objective This study was to compare the visual performance between Intralase FS60 femtosecond laser flap and mechanical microkeratome Moria M2 flap in LASIK.Methods A prospective nonrandomized controlled study was performed.Two hundred and four myopic eyes of 102 patients were enrolled in this study and divided into two groups according to patients’ opinion,with matched demography between the two groups.LASIK with FS60 femtosecond laser flap was performed on 100 eyes of 50 myopia and/or myopic astigmatism in the FS group,and Moria M2 flap LASIK was performed on 104 eyes of 52 patients in the microkeratomes group.Zernike coefficients and the root-mean-square (RMS) of higher order aberrations were measured by Wavescan wavefront aberrometer before and 3,6 and 12 months after surgery,and the contrast sensitivity (CS) in different spatial frequencies under the scotopia and scotopia + glare background was detected using Optec 6500 visual function instrument before and 3,6,12 months after surgery.This study protocol was approved by Ethic Committec of Beijing Tongren Hospital,and written informed consent was obtained from each patient prior to surgery.Results The uncorrected visual acuity (UCVA) levels after surgery reached or was superior to the preoperative best corrected visual acuity (BCVA) in 95.1％,94.2％ and 93.9％ patients in the FS group and in 94.2％,93.8％ and 93.2％ patients in the microkeratomes group 3,6,12 months after surgery,respectively.The mean spherical equivalent (SE) was (-6.37 ±2.06)D,(-0.26±0.45)D and (-0.45± 0.51)) in the FS group,(-6.25± 2.43) D,(-0.44± 0.64) D and (-0.35±0.59)D in the microkeratomes group before surgery and 3,12 months after surgery,respectively.There were no significant differences in the SE in various time points between the two groups (u =1.194,1.429;both at P＞ 0.05).The root means square high order (RMSh) and RMS3-6 in the FS group were significantly lower than those in the microkeratomes group 3,6 and 12 months after surgery (all at P＜0.05).Under the background of scotopia or scotopia+glare,the LogCS values under different spatial frequencies were significantly higher in the FS group than those in the microkeratomes group 3 and 6 months after surgery (all at P＜0.05).In 12 months after surgery,no significant difference was found in the LogCS under the 1.5 c/d in the background of scotopia between FS group and microkeratomes group (P＞0.05),and the LogCS values under the 12.0 c/d and 18.0 c/d in the background of scotopia or scotopia+glare in the FS group were better than those in the microkeratomes group (all at P＜0.05).Conclusions Femtosecond laser assistant LASIK has better visual performance and lower higher-order aberrations than microkeratomes assistant LASIK.

Background Corneal refractive surgery has significant effects on corneal biomechanical properties.However,there are few study on large scale population with corneal biomechanical properties in the myopic population before corneal refractive surgery.Objective This study was to evaluate the change of corneal biomechanical properties and influence factors in myopic eyes using ocular response analyzer (ORA).Methods A prospective cohort study was carried out in Beijing Tongren Eye Center from April 2010 to January 2011.Corneal hysteresis (CH) and corneal resistance factor (CRF) were detected using ORA in 1 792 eyes of 896 myopic subjects who were going to receive corneal refractive surgery under the informed consent.According to different spherical equivalent (SE) the eyes were grouped into-0.25-＜-3.0 D group,-3.0-＜-6.0 D group,-6.0-＜-9.0 D group,-9.0-＜-12.0 D group,-12.0-＜-15.0 D group and ≥-15.0 D group and according to different central corneal thickness (CCT),the eyes were grouped into ＜500 μm group,500-＜550 μm group,550-＜600 μm group and≥600 μm group.The CH value and CRF value in different SE groups or different CCT groups were compared,and the factors influencing CH and CRF were analyzed by Pearson correlation analysis.Results The mean CH and CRF value were (9.84±1.52)mmHg (1 mmHg =0.133 kPa) and (10.46±1.71) mmHg,respectively in the myopic eyes.The CH values were (10.35±1.53),(10.07±1.55),(9.81±1.46),(9.71±1.59),(9.35±1.55) and (9.23±1.28) mmHg in the-0.25-＜-3.0 D group,-3.0-＜-6.0 D group,-6.0-＜-9.0 D group,-9.0-＜-12.0 D group,-12.0-＜-15.0 D group and ≥-15.0 D group,respectively,showing a significant difference among the groups (F=20.69,P＜0.01),and the CH values in the-6.0-＜-9.0 D group,-9.0-＜-12.0 D group,-12.0-＜-15.0 D group and ≥-15.0 D group were significantly lower than those in the-6.0-＜-9.0 D group,-9.0-＜-12.0 D group (all at P＜0.01).There was no significant difference in the CRF values among different SE groups (F =0.65,P =0.49).CH and CRF values were increasing with the raise of CCT,with evidently differences among the CCT＜500 μm group,500 μm ≤ CCT＜550 μm group,550 μm≤ CCT＜600 μm group and CCT≥ 600 μm group (CH:F=110.99,P＜0.01;CRF:F =84.35,P＜0.01),and the CH and CRF values were significantly higher in the 550 μm ≤ CCT＜600 μm group and CCT ≥600 μm group than those in the CCT＜500 μm group (all at P＜0.01).CH showed a positive correlation with SE (r =0.24,P＜0.01),and no significant correlation between CRF and SE (r =0.03,P =0.20).The CH and CRF showed the positive correlations with the CCT (r=0.42,0.57,both at P＜0.01).In addition,CH and CRF values increased as the increases of SE,corneal curvature (CC) and CCT values,with the regression equation of CH =-7.87+0.08SE+0.16CC+0.02CCT (R2=0.26,P＜0.01) and CRF=-11.42+0.14CC+0.03CCT (R2=0.34,P＜0.01),respectively.The CH and CRF did not change with the age and gender in the subjects.Conclusions Corneal biomechanical properties including CH and CRF were positively correlated with CCT,CC and SE.