Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: To examine the impacts of chemotherapy/radiotherapy, targeted therapy, and combined treatment on the quality of life in patients with intermediate and advanced lung cancer. Methods: The patients with intermediate and advanced lung cancer undergoing chemotherapy/radiotherapy, targeted therapy, and combined treatment for the first time were recruited from a tertiary hospital in Weifang City, Shandong Province, using a quota sampling method in September 2023. Basic information was collected using a general information questionnaire, and the quality of life was assessed using the Chinese version of Functional Assessment of Cancer Therapy-General. The investigation started on the 7th day of treatment, and the follow-ups were conducted at 3 and 6 months. The quality of life in patients with different treatment regimens and at different treatment time were compared using repeated measure analysis of variance. Results: There were 26 chemotherapy/radiotherapy patients, 32 targeted therapy patients, and 95 combination therapy patients. There were no significant differences in age, gender, place of residence, education level, self-rated economic status, medical insurance, pathological type and disease stage among the three treatment regimens (all P>0.05). The repeated measure analysis of variance showed an interaction effect between time and group among patients receiving the three treatment regimens (P<0.05). The quality of life scores of patients receiving combination therapy decreased with extended treatment time (all P<0.05). The quality of life scores of patients receiving targeted therapy at 3 and 6 months were lower than those treated for 7 days (both P<0.05). No significant differences were observed in quality of life scores among chemotherapy/radiotherapy patients with different treatment durations (all P>0.05). At 3 and 6 months, patients receiving combination therapy had lower quality of life scores compared to those receiving chemotherapy/radiotherapy or targeted therapy (all P<0.05). Conclusion The decline in quality of life for patients with intermediate and advanced lung cancer undergoing chemotherapy/radiotherapy and targeted therapy is less than that for patients receiving combined therapy.

The analysis presented here is based on the blood components of Guanxin Qiwei tablets, the key anti-atherosclerosis pathway of Guanxin Qiwei tablets was screened by network pharmacology, and the anti-atherosclerosis mechanism of Guanxin Qiwei tablets was clarified and verified by cell experiments. HPLC-Q-Exactive-MS/MS technique was used to analyze the components of Guanxin Qiwei tablets into blood, to determine the precise mass charge ratio of the compounds, and to conduct a comprehensive analysis of the components by using secondary mass spectrometry fragments and literature comparison. Finally, a total of 42 components of Guanxin Qiwei tablets into blood were identified. To better understand the interactions, we employed the Swiss Target Prediction database to predict the associated targets. Atherosclerosis (AS) disease targets were searched in disease databases Genecard, OMIM and Disgent, and 181 intersection targets of disease targets and component targets were obtained by Venny 2.1.0 software. Protein interactions were analyzed by String database. The 32 core targets were selected by Cytscape software. Gene Ontology (GO) enrichment analysis and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis were performed in DAVID database. It was found that the anti-atherosclerosis pathways of Guanxin Qiwei tablets mainly include lipid metabolism and atherosclerosis and AGE-RAGE signaling pathway in diabetic complications and other signal pathways. The core targets and the core compounds were interlinked, and it was found that cryptotanshinone and tanshinone ⅡA in Guanxin Qiwei tablets were well bound to TNF, PPARγ, AKT1, PTG2 and other targets. The lipid metabolism and atherosclerotic pathway was verified using human hl-7702 hepatocytes. This study preliminarily identified the potential pharmacodynamic components of Guanxin Qiwei tablets in the treatment of AS diseases and predicted their pathways of action, and verified the relationship between regulating lipid metabolism and atherosclerosis of Guanxin Qiwei tablets in vitro, providing a reference for the further study of the pharmacodynamic material basis and mechanism of action of this prescription. This experiment was approved by the Medical Ethics Committee of Inner Mongolia Medical University (No. YKD202401262).

ObjectiveTo investigate the optimal ratio of goat horn replacing antelope horn in Fufang Lingjiao Jiangya pills and the blood pressure-lowering mechanism of this medicine. MethodsThe blood pressure-lowering efficacy of Fufang Lingjiao Jiangya pills with varying proportions of goat horn replacing antelope horn was evaluated on spontaneous hypertensive rats （SHR）. In this experiment， 50 SHR rats were randomly grouped as follows： model （n=8）， captopril （0.01 g·kg^-1） （n=6）， low-dose blank Fufang Lingjiao Jiangya pills （0.342 g·kg^-1） （n=6）， high-dose blank Fufang Lingjiao Jiangya pills （0.684 g·kg^-1） （n=6）， low-dose antelope horn-containing Fufang Lingjiao Jiangya pills （0.378 g·kg^-1） （n=6）， high-dose antelope horn-containing Fufang Lingjiao Jiangya pills （0.756 g·kg^-1） （n=6）， low-dose goat horn-containing Fufang Lingjiao Jiangya pills （0.378 g·kg^-1） （n=6）， and high-dose goat horn-containing Fufang Lingjiao Jiangya pills （0.756 g·kg^-1） （n=6）. Additionally， 8 WKY rats were used as the normal group. Drugs were administered by gavage for 4 weeks while an equal volume of distilled water was administered for the normal and model groups. Blood pressure was measured before administration， 3 h post administration， and biweekly thereafter. In the experiment for Fufang Lingjiao Jiangya pills with goat horn replacing antelope horn in different proportions， 48 SHR rats were randomly grouped as follows： model， blank Fufang Lingjiao Jiangya pills （0.684 g·kg^-1）， antelope horn-containing Fufang Lingjiao Jiangya pills （0.756 g·kg^-1）， 2× goat horn-containing Fufang Lingjiao Jiangya pills （0.824 g·kg^-1）， 4× goat horn Fufang Lingjiao Jiangya pills （0.969 g·kg^-1）， and 6× goat horn Fufang Lingjiao Jiangya pills （1.112 g·kg^-1）. The normal group included 8 WKY rats， and the normal group and model group received an equal volume of distilled water. The treatment lasted for 2 weeks， and blood pressure was recorded at various time points （pre-administration， 3 h post administration， and on days 4， 7， 10， and 14 of administration）. Serum levels of angiotensin-converting enzyme （ACE）， angiotensin Ⅱ（Ang Ⅱ）， renin， and interleukin-6 （IL-6） were measured by enzyme-linked immunosorbent assay. Histopathological changes in the heart， kidney， and thoracic aorta were observed by hematoxylin-eosin staining. The protein levels of ACE2， angiotensin Ⅱ type 1 receptor （AT1R）， and angiotensinogen （AGT） in the kidney tissue were determined by Western blot， while the expression of nuclear factor （NF）-κB p65 and Toll-like receptor 4 （TLR4） in the thoracic aorta tissue was assessed by immunohistochemistry. ResultsCompared with the model group， all treatment groups showed lowered blood pressure （P<0.05， P<0.01）， and the 6× goat horn-containing Fufang Lingjiao Jiangya pills group showed consistent blood pressure-lowering effect with the antelope horn-containing Fufang Lingjiao Jiangya pills group. Compared with the normal group， the model group showed elevated serum levels of ACE， Ang Ⅱ， renin， and IL-6， while the elevations were declined in the Fufang Lingjiao Jiangya pills groups （P<0.05， P<0.01）. Pathological changes in the heart， kidney， and thoracic aorta were alleviated in all the treatment groups， with the 6× goat horn- and antelope horn-containing Fufang Lingjiao Jiangya pills groups exhibited the best effect. Western blot and immunohistochemistry results showed that all the treatment groups exhibited down-regulated protein levels of AT1R， AGT， NF-κB p65， and TLR4 and up-regulated protein levels of ACE2 （P<0.05， P<0.01） compared with model group， with the 6×goat horn- and antelope horn-containing Fufang Lingjiao Jiangya pills groups showcasing the best effect. ConclusionReplacing antelope horn with 6×goat horn in Fufang Lingjiao Jiangya pills can achieve consistent blood pressure-lowering effect with the original prescription. The prescription may exert the effect by inhibiting the renin-angiotensin-aldosterone system （RAAS） and TLR4/NF-κB signaling pathways.

[Objective] To establish a method for detecting the potency of recombinant human coagulation factor Ⅶa for injection. [Methods] By adding the sample and factor Ⅶ deficient plasma to the sample cup and activating the reaction with prothrombin time assay reagent (PT reagent), the coagulation time of the sample was determined by the change in magnetic bead swing amplitude in the sample cup. The logarithm of coagulation time was inversely proportional to the logarithm of human factor Ⅶa potency. [Results] Under the experimental conditions, the specificity of the methodology was evaluated through spiked recovery, and the recovery rates ranged from 90.0% to 110.0%. Within the range from 0.125 to 1.000 IU/mL, there was a good linear response between the potency and coagulation time of the standard and sample, with correlation coefficients r>0.99. As for the accuracy and repeatability, the recovery rates of various concentrations detected in the stock solution were 101.0%, 100.0% and 112.0%, respectively, with RSD values of 2.6%, 4.0% and 0.0%, respectively. The recovery rates of various concentrations in finished product testing were 104.0%, 94.7% and 112.0%, respectively, with RSD values of 1.9%, 2.4% and 0.0%, respectively. As for the intermediate precision, the RSD were 4.5% and 3.7%, respectively. After treated with sample diluent, the sample was tested at room temperature for 6 hours and still exhibited relatively stable biological activity. [Conclusion] This detection method is accurate, stable, easy to operate and highly automated, and is suitable for detecting the potency of recombinant human coagulation factor Ⅶa for Injection.

Objective To investigate the predictive value of quantitative parameters of contrast-enhanced ultrasound (CEUS) in evaluating kidneys from donation after brain death (DBD) for the occurrence of delayed graft function (DGF) in recipients. Methods The clinical data of 134 DBD donors and 202 corresponding kidneys and recipients were retrospective analyzed. The recipients were divided into DGF group (n=39) and non-DGF group (n=163) according to the renal function after kidney transplantation. Conventional ultrasound, CEUS parameters, and clinical data were compared between the two groups. Receiver operating characteristic (ROC) curves were used to determine the optimal cut-off values for predicting DGF using CEUS parameters, clinical parameters, and their combination, based on the highest Youden index. The predictive ability of different parameters for DGF was evaluated. Results There were statistically significant differences in cortical peak intensity (PIc), medullary peak intensity (PIm), donor albumin (ALB), serum creatinine (Scr) after admission, and the Na⁺ concentration of recipients between the two groups (all P<0.05). The area under the curve (AUC) for predicting DGF using the combination of CEUS parameters PIc and PIm was 0.711, with an optimal cut-off value of 0.193 and a Youden index of 0.382. The AUC for predicting DGF using the combination of CEUS parameters PIc, PIm and clinical parameters was 0.808, with an optimal cut-off value of 0.191 and a Youden index of 0.517. The sensitivity and specificity were 0.769 and 0.613 for the former, and 0.769 and 0.748 for the latter, respectively. The AUC for predicting DGF using CEUS parameters PIc and PIm combined with clinical parameters was significantly higher than that using CEUS parameters PIc and PIm (P<0.05). Conclusions The CEUS quantitative parameters PIc and PIm have good predictive value in assessing kidneys from DBD donors for DGF in recipients, and the diagnostic efficacy is better when combined with clinical parameters.

Objective: To identify an optimal back-flush solution for leukocyte-depleted filters that maximizes peripheral blood mononuclear cell (PBMC) recovery with high viability, long-term storage stability, and sterility of the harvested residues, thereby providing a clinically translatable strategy. Methods: Three sterile bag-packaged solutions—Saline, Solvent, and Hanks' balanced salt solution (HBSS)—were used to back-flush randomly assigned leukocyte-depleted filters. Nucleated cell recovery rate and viability of the harvested residues were compared. The optimal solution identified was applied to an expanded sample set. PBMC viability and yield were evaluated after 1h vs 48h storage of the residues. PBMCs isolated from the residues were cryopreserved in liquid nitrogen for 1 month, followed by post-thaw comparisons of viability and T-cell expansion capacity. Results: The Solvent group achieved the highest and most consistent nucleated cell recovery rate. Post-flush recovery rate from filters after 400 mL whole blood processing was (21.3±1.6)% for the Solvent group, significantly higher than Saline group (19.2±6.3)% and HBSS group (11.2±5.0)%, with residues from all groups maintaining viability >90%. No biologically significant difference in residue viability was observed between 48h vs 1h storage groups (93.3±2.3)% vs (95.7±1.8)%). PBMC recovery rates from residues showed no statistical difference between 48h vs 1h storage groups [(48.2%±9.5%)vs (40.41%±8.35%), P>0.05], with (17.7±2.6)×10 cells. After 1-month cryopreservation and 10-day expansion, PBMCs isolated from 48-hour-stored residues retained (91.2±3.2)% viability and achieved a (61.9±15.9)-fold expansion. Conclusion: The bag-packaged Solvent, as a back-flush solution, enables sterile acquisition of leukocyte-depleted filter residues through closed-system tubing connections. These residues maintained PBMC viability and recovery rates after 48h storage at 2℃-8℃, with post-cryopreservation (1-month liquid nitrogen) viability and expansion capacity remaining stable. This protocol complies with blood bank regulatory criteria, addresses the concerns about the infectious window period in cell therapy raw materials, and provides a clinically translatable strategy for PBMC-based applications.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.