Continuously cropping obstacle restricts ginseng production and rational use of land resource severely, and autotoxicity is one of the most important factors. In our previous work, ginseng autotoxin degrading bacteria were isolated, in the present re- search, plate culturing method and traditional physiological and biochemical method were used to analyze biological indices and protective enzyme activities, in order to elucidate the mitigative effect of autotoxin degrading bacteria on autotoxicity of P. ginseng. Results indicated that, except for palmitic acid, autotoxicity of benzonic acid, diisobutyl phthalate, diisobutyl succinate, and 2,2-bis (4- hydroxyphenyl) propane on the growth of ginseng seeds was significantly alleviated after autotoxins degrading bacteria was inoculated, and which have no evident difference with control. Except for benzoic acid, enzyme activity of SOD, POD and CAT in other autotoxin degrading treatments decreased significantly. The present research showed that, microbial degradation could alleviate the autotoxicity of autotoxins on ginseng seeds effectively, and which will be helpful for the resolution of ginseng continuously cropping obstacle problem.
Bacteria ; metabolism ; Panax ; enzymology ; growth & development ; metabolism ; microbiology ; Toxins, Biological ; metabolism

AIM: To observe effect of the iris location to femtosecond - combined wavefront guided LASIK for myopia and astigmatism.?METHODS:The patients with astigmatism >1. 0D during the same time and followed up for 1a were selected. A total of 129 eyes in 67 patients were treated under iris location with femtosecond-combined wavefront guided LASIK ( experimental group) and 161 eyes in 82 cases with femtosecond-combined wavefront guided LASIK ( control group) . Laser cutting went with the same laser machine. The uncorrected visual acuity ( UCVA ) , best corrected visual acuity ( BCVA) , and wavefront aberration between the two groups were compared at 1, 3, 6mo and 1a after surgery.?RESULTS:At 1 and 3mo after surgery, the number of patients with better postoperative UCVA than preoperative BCVA between the two group showed a statistically significant difference (χ2=6. 423, P=0. 011,χ2=14. 431, P=0. 01 ); at 1d and 1mo after surgery, the residual astigmatism showed a statistically significant difference between two groups (t=1. 98, P<0. 05; t=2. 23, P<0. 05). At 3, 6mo and 1a after surgery, the differences on the change of residual astigmatism between the two groups weren’t significant ( P > 0. 05 ). At 6mo and 1a after surgery, the differences on UCVA between the two groups weren’t significant ( P > 0. 05 ). Until 1a after surgery, the root mean square ( RMS ) of high order wavefront aberration of the two groups, spherical aberration and coma aberration ( COMA ) were all enhanced compared to before surgery(P<0. 05). At 1, 3mo after surgery, the RMS showed a statistically significant difference between two groups (P<0. 05). At 1, 3, 6mo, 1a after surgery, the increase of COMA in experimental group was significantly lower than that in control group (P<0. 05).? CONCLUSION: Iris location technology applied in femtosecond - combined wavefront guided LASIK for myopia and astigmatism, can make the vision recovery faster, the RMS of high order and COMA increase less, the residual astigmatism less, show better and more stable treatment effect.

AIM:To contrast analysis of postoperative variation of corneal posterior surface heights after Femtosecond LASlK ( FS - LASlK ) and small incision lenticule extraction ( SMlLE) for high myopia.
●METHODS: Sixty-seven cases of high myopic patients (132 eyes) operated with laser corneal refractive in our hospital from May to Dec. in 2015 (-6. 00D≤spherical equivalent degree≤-10. 00D) were selected and divided into FS-LASlK group and SMlLE group. The thickness of corneal flaps at FS-LASlK and the thickness of map at SMlLE were designed to be 110μm. Corneal posterior surface heights were examined by Pentacam at preoperation, postoperative 3 and 6mo after FS-LASlK and SMlLE operation. Surface height changes after preoperative, postoperative 3 and 6mo were compared by measuring Pentacam corneal analysis system.
●RESULTS: Six months after operation, the FS-LASlK posterior corneal surface height was 6. 47 ± 1. 65mm, significantly higher than 5. 20 ± 1. 32mm before operation. SMlLE posterior corneal surface height was 6. 40 ± 1. 33mm, significantly higher than 5. 18 ± 1. 25mm before operation, the differences were statistically significant( P<0. 05). Six month after surgery, two methods of corneal surface height variation obtained was 1. 29 ± 1. 28mm and 1. 22 ± 0. 89mm, there was no significant difference ( P>0. 05).
●CONCLUSION:After FS-LASlK and SMlLE, the corneal posterior surface is protrusive. FS - LASlK is slightly obvious than SMlLE in early period. The stability of the posterior surface is better after SMlLE.

Objective To evaluate CT imaging and pathological features of maxillofacial malignant myoepithelioma (MME). Methods A total of eight patients with pathologically confirmed MME of the maxillofacial region were underwent non-enhanced and contrast-enhanced CT scans.CT features of the lesions were assessed as follows:location,number,shape,size,enhancement pattern and CT number on non-enhanced and contrast-enhanced scan.CT features were compared with the pathological results.Results All the lesions were unilateral,in which mixed type with clear cells and spindle cells in 5 cases,mixed type with epithelioid cells and plas-ma cells in 2 cases,and clear cell type in one case.8 cases were manifested as lobulated mass.On non-enhanced scan,the density of all the lesions were hetergeneous with cystic area,1 case with calcification and 2 cases with bone destruction.On the contrast-en-hanced CT,all the lesions were showed hetergeneously moderate or obvious enhancement,and cystic,line and crack areas without the enhancement were observed.Minor vessel and spiculate protuberance of marginal zone on the arterial phase were observed in most le-sions.Conclusion MME has different pathological subtypes and characteristic CT features.CT is an effective method to diagnose MME.

Objective To investigate the role of CCL2 in pain facilitation and spinal mechanisms in the rat model of bone cancer pain.Methods The bone cancer pain model was developed by inoculating.Walker 256 mammary gland carcinoma cells into the rat tibia medullary cavity.SD female rats were divided into 5 groups randomly ( n =8):sham group( group Ⅰ),sham + CCL2 antibody group( group Ⅱ),BCP group( group Ⅲ),BCP +control lgG group ( group Ⅳ),BCP + CCL2 antibody group ( group Ⅴ ).VonFrey threshold was measured one day before operation and 1 st,3 rd,5th,7th,10th,14th,21 st after operation.CCL2 antibody or control lgG was injected intrathecally from 10th to 12th day.The expression of the spinal Iba-1 ( microglial marker) in rat lumbar4-5 was detected by immunohistochemistry assay.Results From the 10th to 21st day after operation,the PMWT of group Ⅲ rats were ( 1.78 ±0.38)g,( 1.70 ±0.17)g,( 1.35 ±0.07 )g;group Ⅳ rats were (2.99 ±0.67)g,(2.52 ±0.75)g,(1.13±0.07)g ; and group Ⅴ rats were (5.88±0.66)g,(7.81 ±0.75)g,(6.19±0.53)g.Compared with group Ⅲ,the PMWT of group Ⅴ was remarkly higher (P＜0.01) ; group Ⅳ had no obvious statistical significance (P＞0.05).At the 14th day after operation,the MOD of group Ⅲ,Ⅳ and Ⅴ rats were (151.3 ±10.8 ),( 149.2 ± 10.6),(74.5 ± 5.0),Compared with group Ⅲ,the MOD of group Ⅴ was significantly increased (P＜0.01 ),group Ⅳ had no obvious statistical significance (P ＞ 0.05 ).Conclusion Intrathecal injection of CCL2 antibody can remarkly attenuate established pain facilitation of tibial bone cancer pain rats,and significantly suppress the expression of Iba-1.It suggests that CCL2 is involved in the bone cancer pain via activation of spinal microglia.

Objective To evaluate the diagnostic value of radionuclide salivagram in children with pulmonary aspiration.Methods From March 2012 to June 2015,a total of 62 patients (37 males,25 females;age range:2 d-14 years) with suspected pediatric aspiration pneumonia were enrolled in this retrospective study.All patients underwent gastroesophageal reflux (GER) imaging and(or) radionuclide salivagram.Detection rate of pulmonary aspiration by the two imaging techniques was compared with x2 test.Results Of 62 patients,14 were diagnosed as pulmonary aspiration,including 1 detected by GER imaging,and 13 detected by salivagram.The detection rate for pulmonary aspiration by radionuclide salivagram (26.0％,13/50) was significantly higher than that by GER imaging (3.1％,1/32;x2=7.211,P＜0.05).Eight of the 13 cases with pulmonary aspiration diagnosed by radionuclide salivagram underwent upper gastrointestinal radiography,and 5 cases had visible contrast agent in the airway.Conclusion Radionuclide salivagram has a higher detection rate for pulmonary aspiration compared to GER imaging,and has good concordance with the traditional upper gastrointestinal radiography.

Objective To evaluate the value of 99Tcm-EHIDA SPECT combined with planar hepatobiliary scintigraphy (combined scintigraphy) in the differentiation of infant biliary atresia (BA) from neonatal hepatitis (NH).Methods This is a retrospective study on 32 infants with cholestasis (18 males,14 females;age:28-83 d) from June 2013 to June 2014.All infants underwent sequential 99Tcm-EHIDA hepatobiliary planar scintigraphy and combined scintigraphy,and the diagnostic efficacy of the 2 methods for differentiating infant BA from NH was analyzed by x2 test.Results In sequential planar scintigraphy,the diagnostic sensitivity,specificity,accuracy,positive predictive value and negative predictive value were 76.2％ (16/21),6/11,68.8％ (22/32),76.2％ (16/21) and 6/11,respectively.In combined scintigraphy,the diagnostic parameters were 95.2％ (20/21),8/11,87.5％ (28/32),87.0％ (20/23) and 8/9,respectively.Combined scintigraphy correctly identified 4 BA cases that were misdiagnosed as NH by planar scintigraphy.The sensitivity of combined scintigraphy was significantly higher than that of planar scintigraphy (x2 =4.285,P＜0.05),while no significant difference was found in the other diagnostic parameters (x2 =0.061-0.405,all P＞0.05).Conclusions Combined scintigraphy has incremental value for the differentiation of infant BA from NH.

The vip3A gene of Bt9816C was cloned and the sequencing result was submitted to GenBank (accession no.AY945939). The gene was identified as a novel vip3Aa gene, which was assigned name vip3Aa18 by the Bacillus thuringiensis delta-endotoxin nomenclature committee. Subsequently, vip3Aa18 was expressed in Escherichia coli BL21 and bioassay demonstrated that the purified recombinant Vip3Aa18 had high toxicity against Helicoverpa armigera and Spodoptera exigua. The results of sequence analysis revealed that a carbohydrate binding domain exists on the C-termini 536 to 667 residues of Vip3Aa18,which maybe participate in binding to midgut receptors in susceptible insects. Moreover, a transmembrane helices located on N-termini 272 to 292 residues was proposed responding for pore formation. Furthermore, a putative disulfide bond was found in the Vip3Aa18 sequence. The specific structures and sites of Vip3Aa18 sequence imply potential function.

The potential of Rhizobium sp. N613 to produce the exopolysaccharide (REPS) was studied in this paper. Using an orthogonal design in a flask-shaker culture system, the fermentation medium and conditions of synthesizing REPS were optimized. Based on these results, the fermentation kinetic parameters were obtained in the batch fermentation with a 10L fermentor. The REPS yield of 11.31g/L was achieved by metabolic regulation during 40 h fed-batch fermentation. Transplanted tumor models of sarcoma 180 in mice were used to evaluate the anti-tumor effect. The result of anti-tumor activities showed that inhibition rate was 53.40%, when dose of REPS was 5mg/kg. These results indicate that REPS has the following properties: the short duration of fermentation, the high yield, the low cost, the effective immunocompetence and thickening. Thus, REPS has the value of development and application.

The potential of a Sinorhizobium fredii strain producing a copolymer polyhydroxyalkanoate(PHA)from glucose and sodium decanoate substrates was studied in this paper.Using orthogonal design in a flask-shaker culture system,the culture medium,some culture conditions and vital regulation conditions for polymer synthesis were optimized.These optimized results were applied into further studies in two-stage fed-batch with a 10L fermentor.The whole culture process consisted of two stages,that is,the cell growth and the copolymer production.The first stage was for the cell growing to a desired biomass and the second was for the copolymer synthesis.For producing PHA polymers,the selected 8 mM sodium decanoate was added into the broth by adopting a two-step adding method for avoiding of foaming when the biomass had approached 28.5g/L dry cell.The maximum P(HB-HH)production could be 17.55 g/L with a monomer ratio of 79.4%(W/W)3-HB and 20.6%(W/W)3-HH.The molecule constitute of the copolymer is poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)[P(HB-HH)] and its molecular weight(MW)is 1.4?105D.The results demonstrated that the employed S.fredii strain could be a potential candidate for industrial production of the copolymer.The fermentation parameters acquired in the experimental system offered some valuable references for studying large-scale production of the copolymer.