PURPOSE: The purpose of this study was to evaluate the proper axial thickness of zirconia abutment applied to implant in the anterior region. MATERIALS AND METHODS: Zirconia abutments were prepared at different axial wall thickness by processing pre-sintered zirconia blocks via CAD/CAM to obtain equal specimens. The abutments were each produced with a thickness of 0.5 mm (Group 1), 0.8 mm (Group 2), 1.2 mm (Group 3), or 1.5 mm (Group 4). The implant used in this study was a external connection type one (US, Osstem, Pussan, Korea) product and the zirconia abutment was prepared via replication of a cemented abutment. The crowns were prepared via CAM/CAM with a thickness of 1.5 mm and were cemented to the abutments using RelyX(TM) UniCem cement. A universal testing machine was used to apply load at 30 degrees and measure fracture strength of the zirconia abutment. RESULTS: Fracture strength of the abutments for Group 1, Group 2, Group 3, and Group 4 were 236.00 +/- 67.55 N, 599.00 +/- 15.80 N, 588.20 +/- 33.18 N, and 97.83 +/- 98.13 N, respectively. Group 1 showed a significantly lower value, as compared to the other groups (independent Mann-Whitney U-test. P<.05). No significant differences were detected among Group 2, Group 3, and Group 4 (independent Mann-Whitney U-test. P>.05). CONCLUSION: Zirconia abutment requires optimal thickness for fracture resistance. Within the limitation of this study, > 0.8 mm thickness is recommended for zirconia abutment in anterior implants.
Crowns

OBJECTIVE: Panic disorder has been suggested to be divided into the respiratory and non-respiratory subtypes in terms of its clinical presentations. The present study aimed to investigate whether there are any differences in treatment response and clinical characteristics between the respiratory and non-respiratory subtypes of panic disorder patients. METHODS: Among the 48 patients those who completed the study, 25 panic disorder patients were classified as the respiratory subtype, whereas 23 panic disorder patients were classified as the non-respiratory subtype. All patients were treated with escitalopram or paroxetine for 12 weeks. We measured clinical and psychological characteristics before and after pharmacotherapy using the Panic Disorder Severity Scale (PDSS), Albany Panic and Phobic Questionnaire (APPQ), Anxiety Sensitivity Index-Revised (ASI-R), State-Trait Anxiety Inventory (STAI-T, STAI-S), Hamilton Anxiety Rating Scale (HAM-A), and Hamilton Depression Rating Scale (HAM-D). RESULTS: The prevalence of the agoraphobia was significantly higher in the respiratory group than the non-respiratory group although there were no differences in gender and medication between the two groups. The respiratory group showed higher scores on the fear of respiratory symptoms of the ASI-R. In addition, after pharmacotherapy, the respiratory group showed more improvement in panic symptoms than the non-respiratory group. CONCLUSION: Panic disorder patients with the respiratory subtype showed more severe clinical presentations, but a greater treatment response to SSRIs than those with non-respiratory subtype. Thus, classification of panic disorder patients as respiratory and non-respiratory subtypes may be useful to predict clinical course and treatment response to SSRIs.
Agoraphobia ; Anxiety ; Citalopram ; Classification ; Depression ; Drug Therapy ; Humans ; Panic ; Panic Disorder* ; Paroxetine ; Prevalence ; Surveys and Questionnaires ; Serotonin Uptake Inhibitors ; Treatment Outcome

Photodynamic therapy (PDT) can be used as palliative therapy to reduce obstructive symptoms in patients with advanced lung cancer. Herein, we report on the case of a patient with fatal broncho-mediastinal fistula after PDT. A 57-year-old woman was diagnosed as non-small cell lung cancer (squamous cell carcinoma, cT4N3). She received PDT on the endobronchial mass obstructing her right main bronchus twice in 48 hours interval. Two weeks later, concurrent chemoradiation therapy (CCRT) with weekly Paclitaxel/Carboplatin was started. During maintenance chemotherapy, a new nodule in her scalp developed and turned out to be a metastatic nodule. A broncho-mediastinal fistula was suspicious on follow-up chest computed tomography and a broncoscopy revealed an extensively damaged medial right main bronchial wall. On the day following bronchoscopy, the patient died of sudden massive hemoptysis.
Bronchi ; Bronchoscopy ; Carcinoma, Non-Small-Cell Lung ; Female ; Fistula ; Follow-Up Studies ; Hemoptysis ; Humans ; Lung Neoplasms ; Maintenance Chemotherapy ; Middle Aged ; Palliative Care ; Photochemotherapy ; Scalp ; Thorax ; Triazenes

Michelangelo was a Renaissance artist showing many works. As the secrets of Michelangelo's art have been revealed recently, various studies have been carried out, revealing the secret code of human anatomy in his work. This was an important clue that Michelangelo dissected a huge number of human beings and was a anatomist with considerable expertise. Brazilian doctors Jalousie Bahaetto and Marcelo G Gli Oliveira, from the Vatican Sistina ceiling murals to the sculpture Pieta, examined the works of the Renaissance genius artist Michelangelo in detail and found anatomical elements in many works. Although some interpretations are controversial, it would be a good experience for medical doctor to appreciate masterpieces of Michelangelo in comparison to their human anatomy.
Anatomists ; Humans ; Sculpture

Anatomic variations in the branching pattern of the axillary artery are common and have been studied by many authors. The origin of the anterior circumflex humeral artery is also various and its association with other variations has been focused recently. This study identified the origin of the anterior circumflex humeral artery, the communication between the musculocutaneous and median nerves, and the third head of the biceps brachii muscle, and then their associations were examined. Axillae of 75 cadavers were dissected and these variations were collected. The anterior circumflex humeral artery arose directly from the third parts of the axillary artery in 82.0% of upper limbs. It also arose as common stem for both humeral arteries in 7.3% of the third part of the axillary artery and in 5.3% of the subscapular artery, respectively. The anterior circumflex humeral artery was absent in 2.7% and two anterior circumflex humeral artery was found in 1.3% of limbs. The communication between the musculocutaneous and median nerves and the third head of the biceps brachii muscle were found in 32.0% and 16.0% of upper limbs, respectively. These variations were not statistically associated with each other. These results may provide deep knowledge about the anatomy of the anterior circumflex humeral artery and contribute to explain its clinical implications.
Arteries* ; Axilla ; Axillary Artery ; Cadaver ; Extremities ; Head ; Median Nerve ; Upper Extremity

PURPOSE: The purpose of this study was to investigate the fit and screw joint stability between Ready-made abutment and CAD-CAM custom-made abutment. MATERIALS AND METHODS: Osstem implant system was used. Ready-made abutment (Transfer abutment, Osstem Implant Co. Ltd, Busan, Korea), CAD-CAM custom-made abutment (CustomFit abutment, Osstem Implant Co. Ltd, Busan, Korea) and domestically manufactured CAD-CAM custom-made abutment (Myplant, Raphabio Co., Seoul, Korea) were fabricated five each and screws were provided by each company. Fixture and abutments were tightening with 30Ncm according to the manufacturer's instruction and then preloding reverse torque values were measured 3 times repeatedly. Kruskal-Wallis test was used for statistical analysis of the preloading reverse torque values (alpha=.05). After specimens were embedded into epoxy resin, wet cutting and polishing was performed and FE-SEM imaging was performed, on the contact interface. RESULTS: The pre-loading reverse torque values were 26.0 +/- 0.30 Ncm (ready-made abutment; Transfer abutment) and 26.3 +/- 0.32 Ncm (CAD-CAM custom-made abutment; CustomFit abutment) and 24.7 +/- 0.67 Ncm (CAD-CAM custom-made abutment; Myplant). The domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) presented lower pre-loading reverse torque value with statistically significant difference than that of the ready-made abutment (Transfer abutment) and CAD-CAM custom-made abutment (CustomFit abutment) manufactured from the same company (P=.027) and showed marginal gap in the fixture-abutment interface. CONCLUSION: Within the limitation of the present in-vitro study, in domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) showed lower screw joint stability and fitness between fixture and abutment.
Computer-Aided Design* ; Torque

OBJECTIVE: Excessive worry about minor matters and a state in which this worry is experienced as uncontrollable are known to be key symptoms of generalized anxiety disorder (GAD). Given the importance of pathological worry in GAD, the need for psychometrically sound measures of this construct has increased. The purpose of this study was to investigate the usefulness of the Korean version of Penn State Worry Questionnaire (K-PSWQ) for screening GAD. METHODS: Two hundred and forty six patients were initially screened, from which 102 GAD patients and 118 patients with anxiety disorder not otherwise specified (anxiety disorder NOS) were finally enrolled. Patients were diagnosed by a structured clinical interview for the DSM-IV Axis I. We also enrolled 114 control subjects who had no medical or psychiatric history. Pathological worry in both patients and control subjects were assessed at baseline using the PSWQ and we estimated optimal cutoff score by the receiver operating characteristic (ROC) analysis. RESULTS: We found that in the first ROC analysis, a score of 53 could simultaneously optimize sensitivity and specificity in order to discriminate GAD patients from control subjects. From the second receiver operating characteristic analysis, when both sensitivity and specificity were optimized, we can suggest a score of 61 as being the cutoff for differentiating GAD patients from patients with anxiety disorder NOS. CONCLUSION: The Korean version of PSWQ is a useful method for screening GAD patients, although ethnic and cultural differences may affect the cutoff score of PSWQ for GAD.
Anxiety Disorders* ; Anxiety* ; Axis, Cervical Vertebra ; Diagnostic and Statistical Manual of Mental Disorders ; Humans ; Mass Screening* ; Methods ; Surveys and Questionnaires* ; ROC Curve* ; Sensitivity and Specificity

OBJECTIVES: Fast-setting pozzolan cement (Endocem, Maruchi) was recently developed. The aim of this study was to investigate the effects of various root canal irrigants on the washout of Endocem in comparison to the previously marketed mineral trioxide aggregate (ProRoot; Dentsply) in a furcal perforation model. MATERIALS AND METHODS: ProRoot and Endocem were placed into acrylic molds on moist Oasis. Each mold was then immediately exposed to either physiologic saline, 2.5% sodium hypochlorite (NaOCl), or 2% chlorhexidine (CHX) under gentle shaking for five minutes. Washout testing was performed by scoring scanning electron microscope (SEM) images. RESULTS: Endocem exhibited higher washout resistance compared to ProRoot, especially in the NaOCl group. CONCLUSIONS: These results suggest that Endocem can be considered a useful repair material for furcal perforation, especially in a single-visit scenario.
Acrylic Resins ; Aluminum Compounds ; Calcium Compounds ; Chlorhexidine ; Dental Pulp Cavity* ; Drug Combinations ; Fungi ; Oxides ; Pyrroles ; Root Canal Irrigants* ; Silicates ; Sodium Hypochlorite ; Vinyl Compounds

PURPOSE: This study was conducted to obtain difference in fracture strength according to the diameter of one-body O-ring-type of mini implant fixture, to determine the resistance of mini implant to masticatory pressure, and to examine whether overdenture using O-ring type mini implant is clinically usable to maxillary and mandibular edentulous patients. MATERIALS AND METHODS: For this study, 13 mm long one body O-ring-type mini implants of different diameters (2.0 mm, 2.5 mm and 3.0 mm) (Dentis, Daegu, Korea) were prepared, 5 for each diameter. The sample was placed at 30degrees from the horizontal surface on the universal testing machine, and off-axis loading was applied until permanent deformation occurred and the load was taken as maximum compressive strength. The mean value of the 5 samples was calculated, and the compressive strength of implant fixture was compared according to diameter. In addition, we prepared 3 samples for each diameter, and applied loading equal to 80%, 60% and 40% of the compressive strength until fracture occurred. Then, we measured the cycle number on fracture and analyzed fatigue fracture for each diameter. Additionally, we measured the cycle number on fracture that occurred when a load of 43 N, which is the average masticatory force of complete denture, was applied. The difference on compressive strength between each group was tested statistically using one-way ANOVA test. RESULTS: Compressive strength according to the diameter of mini implant was 101.5 +/- 14.6 N, 149 +/- 6.1 N and 276.0 +/- 13.4 N, respectively, for diameters 2.0 mm, 2.5 mm and 3.0 mm. In the results of fatigue fracture test at 43 N, fracture did not occur until 2x106 cycles at diameter 2.0 mm, and until 5x106 cycles at 2.5 mm and 3.0 mm. CONCLUSION: Compressive strength increased significantly with increasing diameter of mini implant. In the results of fatigue fracture test conducted under the average masticatory force of complete denture, fracture did not occur at any of the three diameters. All of the three diameters are usable for supporting overdenture in maxillary and mandibular edentulous patients, but considering that the highest masticatory force of complete denture is 157 N, caution should be used in case diameter 2.0 mm or 2.5 mm is used.
Bite Force ; Collodion ; Compressive Strength ; Denture, Complete ; Denture, Overlay ; Fatigue ; Fractures, Stress ; Humans

BACKGROUND/AIMS: Proton pump inhibitor (PPI) and two types of antimicrobial agents, amoxicillin, and clarithromycin have been widely used for the eradication of Helicobacter pylori. However, antibiotic resistant strains has rapidly increased and has emerged as an important factor for eraducation failure. MATERIALS AND METHODS: Patients diagnosed with chronic gastritis, peptic ulcer disease or gastric epithelial neoplasm was examined by H. pylori PCR for mutation at 23S rRNA. Positive H. pylori PCR without 23S rRNA mutation was eradicated by standard triple therapy. Patients with 23S rRNA mutation was eradicated by standard triple therapy or concomittent therapy with amoxicillin, PPI, clarithromycin and metronidazol or quadruple therapy with bismuth, PPI, tetracycline and metronidazol. We evaluated the predictors of eradication failure with regards to 23S rRNA mutation and initial eradication regimen. RESULTS: Nine hundred sixty-one patients were studied. H. pylori PCR was positive in 35.0% of the patients and 23S rRNA mutatation was found in 22.2% of the patients. The eradication rate of H. pylori for the A2143G point mutated group with standard triple therapy was 28.5% and significantly lower than 93.1% of the wild type group and 100% of the concomitant therapy group, 66.6% of one week quadruple group and 100% of two week quadruple group (P<0.005). CONCLUSIONS: When 23S rRNA point mutation was positive, the standard triple therapy was not effective and the eradication rates was only 22.2%. Alternative regimens should be considered when 23S rRNA point mutation is detected, especially when A2143G point mutation is detected because A2143G point mutation is highly related to eradication failure.
Amoxicillin ; Anti-Infective Agents ; Bismuth ; Clarithromycin ; Daegu ; Gastritis ; Helicobacter pylori* ; Humans ; Neoplasms, Glandular and Epithelial ; Peptic Ulcer ; Point Mutation ; Polymerase Chain Reaction ; Proton Pumps ; RNA* ; Tetracycline