1.Analysis on Treatment of Oculopathy in“Acupuncture DaCheng”
Yongzheng ZHU ; Yongchen ZHANG
Journal of Zhejiang Chinese Medical University 2016;40(8):629-631,635
Objective]Through finishing the information about oculopathy in“Acupuncture DaCheng”, analyze the treatment regulations, provide guidance for oculopathy treatment. [Method] Finishing the clause about oculopathy in“Acupuncture DaCheng”,counting numbers of points, frequency of each points, analyzing the characteristics of points, calculated out all points and the channel attribution. [Results] It is found that treatment of oculopathy inacupuncture Dachengof less points, commonly uses the extraordinary points, local points and meridians around eyes, and the characteristic of the dialectical treatment, in acupuncture treatment method at the same time attaches great importance to the use of moxibustion, and puts forward the whole set of gold needle couching. [Conclusion]Summing up the experiences of acupuncture treatment of oculopathy in“Dacheng”can provide reference for modern acupuncture of oculopathy in selection of points and ideal of treatment.
3.Experimental study on effects of herbs for nourishing and smoothing the liver in reversing bile lithogenicity of guinea pig
Jingzhe ZHANG ; Zuobiao YUAN ; Ju GAO ; Xuelin ZHANG ; Ping SHEN ; Yongzheng JIAO ; Peiting ZHU
Journal of Integrative Medicine 2003;1(4):289-92
OBJECTIVE: To further probe the mechanisms of herbs for nourishing and smoothing the liver in reversing bile lithogenicity of guinea pig. METHODS: Sixty guinea pigs were divided randomly into control group (fed with normal diet, n=20), model group (fed with lithogenic diet, n=20) and treatment group (fed with lithogenic diet plus herbal medicine, n=20). After four-week feeding, the animals were sacrificed and sampled, the rates of gallstone formation in each group were estimated, and the total bile acid (TBA), total bilirubin (TBIL), conjugated bilirubin (CB), unconjugated bilirubin (UCB), and calcium ion in the bile were determined, and the different bilirubins were analyzed by HPLC. RESULTS: (1) The rate of gallstone formation was 5% in normal group, 81.25% in model group and 31.25% in treatment group (P<0.05). (2) The bile TBIL, CB, UCB and Ca(2+) were higher and the bile TBA was lower significantly in model group than that in the other two groups (P<0.05). (3) HPLC analysis revealed that MCB was higher and DCB was lower significantly in model group (P<0.01), and there were no significant differences of UCB and IPA among the three groups. (4) The percentages of MCB and UCB were much higher and the percentage of DCB was remarkably lower in model group (P<0.05). CONCLUSION: Herbs for nourishing and smoothing the liver can significantly reduce the rate of gallstone formation and has effect of reversing lithogenicity of bile in guinea pigs fed with lithogenic diet.
4.Influencing factors for bone cement dispersion within the vertebral body after vertebroplasty
Qiang WU ; Shizan MO ; Yongzheng BAO ; Konghe HU ; Xiaolong HE ; Wengang ZHU ; Xinhua XI ; Xueren ZHONG ; Jinming XU
Chinese Journal of Tissue Engineering Research 2014;(43):6922-6928
BACKGROUND:Percutaneous vertebroplasty and kyphoplasty are both effective in the treatment of osteoporotic vertebral compression fractures, but different in the distribution and dispersion of bone cement. <br> OBJECTIVE:To analyze the factors affecting the bone cement dispersion within the vertebral body in treatment of osteoporotic vertebral compression fracture with vertebroplasty or kyphoplasty. <br> METHODS:A total of 41 patients with osteoporotic vertebral compression fractures were included, and divided into three groups:group A (22 cases receiving high viscosity bone cement vertebroplasty treatment), group B (5 cases receiving high viscosity bone cement kyphoplasty), group C (14 cases receiving low viscosity bone cement vertebroplasty treatment). The groups A and C were divided into subgroups according to bone cement injection volume, time from fracture to operation, preoperative degree of vertebral compression. The distribution and dispersion of bone cement in the vertebra were reconstructed by the CT three-dimensional imaging and volume rendering analysis. <br> RESULTS AND CONCLUSION:In the three groups, after operation, relative dispersion area and relative dispersion volume in the vertebrae had no obvious difference, and the bone cement could al diffuse to upper and lower lamina cross the vertebral midline. There was no significant difference in bone cement diffusion coefficient among the three groups. In a certain range, the bone cement injection volume and bone cement dispersion volume was positively correlated. In groups A and C, bone cement diffusion coefficient decreased with the increasing of bone cement injection volume, time from fracture to operation, and the compression degree of the fractured vertebrae, but showed no significant correlation with bone cement viscosity.
5.Effect of bone cement with a low elastic modulus on the fractured and adjacent vertebrae in patients with osteoporotic vertebral compression fractures:a three-dimensional finite analysis
Yongzheng BAO ; Zhouxing ZHU ; Yunsheng FENG ; Qiang WU ; Konghe HU ; Xiaolong HE ; Wengang ZHU ; Xinhua XI ; Xueren ZHONG ; Longze ZHOU ; Junjian LIAO ; Xiangheng DAI
Chinese Journal of Tissue Engineering Research 2016;20(16):2285-2293
BACKGROUND:Vertebroplasty and kyphoplasty can effectively repair osteoporotic vertebral compression fractures, but bone cement injection can cause the change of stress in the fractured vertebrae and adjacent vertebrae after surgery, leading to new fractures.
OBJECTIVE: To analyze the stress changes of the fractured vertebrae and adjacent vertebrae after vertebroplasty with different elastic modulus bone cement by a three-dimensional finite element method.
METHODS: One healthy adult male volunteer was selected for lumbar spine CT scan. The acquired images were imported for three-dimensional reconstruction using Mimics. The three-dimensional model was smoothed, polished and denoised by Geomagic software, and then the solid mode was built under Workbench Ansys. An osteoporotic vertebral compression fracture model in L2-4 segments was established after assignment. Bone cement (4 mL) with different elastic moduli (8 000, 4 000, 2 000 and 1 000 MPa) injected into the L3 segment distributed in the middle of the vertebrae as spherical shape. 500 N pre-load was applied on the L2 surface with an additional bending moment of 50 N?m. The lower surface free degree of L4 was restrained. The L2-4 forward flexion, posterior extension, right flexion and axial rotation on the right side were stimulated. The stress changes of the fractured vertebrae and the upper and lower adjacent vertebrae before and after bone cement injection with different elastic moduli were compared.
RESULTS AND CONCLUSION:The stress of the fractured vertebrae and adjacent vertebrae were significantly increased compared with that before operation. With the increase of elastic modulus, the stress of the fractured vertebrae increased, but there were no changes in the stress of adjacent vertebrae. These findings indicate that the elastic modulus of bone cement may be a method to reduce new fractures of the fractured and adjacent vertebrae after bone cement injection.
6.Relationship of bone cement injection volume with the stress of osteoporotic compression fractured and adjacent vertebrae
Yongzheng BAO ; Zhouxing ZHU ; Yunsheng FENG ; Qiang WU ; Konghe HU ; Xiaolong HE ; Wengang ZHU ; Xinhua XI ; Xueren ZHONG ; Longze ZHOU ; Junjian LIAO ; Xiangheng DAI
Chinese Journal of Tissue Engineering Research 2015;(52):8365-8372
BACKGROUND:Vertebroplasty and kyphoplasty can effectively repair osteoporotic vertebral compression fractures, but postoperative change of stress in the fractured vertebrae and adjacent vertebrae can lead to new fractures. OBJECTIVE:To analyze the stress changes of the fractured and adjacent vertebrae with different bone cement injection volume by three-dimensional finite element method. METHODS:One healthy adult male volunteer was selected for lumbar spine CT scan. The acquired images were imported for three-dimensional reconstruction using Mimics. The three-dimensional model was smoothed, polished and denoised by Geomagic software, and then the solid mode was built under Workbench Ansys. The osteoporotic vertebral compression fracture model in L2-L4 segments was established after assignment. Bone cement of 1, 2, 4, 6 mL was injected into the L3 vertebrae respectively and distributed in the middle of the vertebrae as spherical shape. 500 N pre-load was applied on L2 surface with an additional moment of 50 N·m. The lower surface free degree of L4 was restrainted. The L2-L4 forward flexion, extension, right flexion and axial rotation on the right side were stimulated to compare the stress changes of fractured vertebrae and adjacent vertebrae before and after the bone cement injection with different volume. RESULTS AND CONCLUSION:The stresses of fractured and adjacent vertebrae after the bone cement injection were significantly increased; meanwhile, the stresses of fractured and adjacent vertebrae increased with the increase of bone cement injection volume, which may be one of the factors leading to the compression fractures of adjacent vertebrae.
7.Review on platelet-rich plasma preparation and its quality evaluation
Shaowen LI ; Zhanhong ZHU ; Nan YU ; Zhigang LU ; Yongzheng PENG ; Guiqiu SHAN
Chinese Journal of Blood Transfusion 2022;35(10):1085-1091
Platelet-rich plasma (PRP) currently has been widely used in various medical fields, such as tissue regeneration, wound healing, scar repair, skin and hair regeneration etc..PRP is rich in platelets, growth factors and other blood components, which can effectively promote tissue repair and healing. However, there is no optimal preparation method and unified standard of composition ratio for PRP, so its clinical application value has not been satisfactorily interpreted yet. In this paper, the preparation and quality standard of PRP were reviewed to provide basis for standardization of RPP in clinical application.
8.Influencing factors and timing prediction of hematopoietic stem cell collection in peripheral blood
Shaowen LI ; Zhanhong ZHU ; Chuxia GUO ; Yixin GAO ; Gang WANG ; Yongzheng PENG ; Zhigang LU
Chinese Journal of Blood Transfusion 2021;34(8):843-846
【Objective】 To explore the effects of blood routine parameters on the peripheral blood hematopoietic stem cell collection of healthy donors, and predict collection timing based on these parameters. 【Methods】 The blood routine parameters pre-donation and the total number of mononuclear cells post-donation of 249 donors who applied blood cell separator to collect peripheral blood hematopoietic stem cells in our hospital from January 2018 to August 2020 were collected. Taking total nucleated cells of circulating blood per litre as the main evaluation index, and its collection with blood routine parameters pre-collection was analyzed. The relevant influencing factors were analyzed using multiple linear regression analysis. The blood routine parameters of healthy donors who donated peripheral blood hematopoietic stem cells in our hospital from September 2020 to October 2020 were substituted into the equation to obtain the predicted values, which were then compared with the actual values obtained from actual product using t test for verification. 【Results】 The analysis showed that the parameters of Hb, RBC, Hct, leukocyte count, neutrophil, lymphocyte, monocyte and Plt were statistically correlated with the total number of mononuclear cells of circulating blood per liter volume (P<0.05). There was a linear relationship between lymphocyte, monocyte, Plt and leukocyte count and the total number of mononuclear cells of circulating blood per liter. The total number of mononuclear cells of circulating blood per liter was set to (Y), and the variables such as lymphocyte (X