BACKGROUND:The chemical compositions and structure of calcium phosphate bone cement are similar to those of human bone, which can fil the bone colapse caused by fracture and induce osteogenesis, but its degradation rate is slow. OBJECTIVE:To evaluate the biocompatibility of the calcium phosphate cement/fibrin glue and the feasibility of repairing radius defects. METHODS: In vitro cytotoxicity experiment: Mouse fibroblasts were cultured in the calcium phosphate bone cement/fibrin glue extracts, phenol solution, and RPMI 1640 culture medium containing 10% fetal bovine serum, respectively, to detect the cytotoxicity grade. Hemocompatibility experiment: Calcium phosphate bone cement/fibrin glue extracts, normal saline and distiled water were respectively added into the rabbit anticoagulation, to detect the hemolytic rate. Forty-five New Zealand white rabbits were enroled and modeled into bilateral radius defects, folowed by randomly alotted into three groups: blank control group without any intervention, experimental and control groups were given the implantation with calcium phosphate bone cement/fibrin glue and autologous radius, respectively. X-ray, histology, bone mineral density and biomechanical test were performed at postoperative 4, 8 and 16 weeks. RESULTS AND CONCLUSION:The toxicity grade of the calcium phosphate cement/fibrin glue was 0 to 1. The hemolytic rate of the calcium phosphate cement/fibrin glue was 3.15%. At 16 weeks postoperatively, X-ray showed that in the experimental and control groups, the fracture line disappeared completely, pulp cavity was recanalized, and in plastic completely. Histology showed that the reconstructed bone trabecular was obvious, plate layer of bone was mature, and medulary cavity recanalization appeared in the control group; there were a large number of new grid-shaped woven bone tissues growing into the material in the experimental group, with overt degradation, and degradation rate was in paralel to bone ingrowth. The bone density, the maximum load, maximum stress and failure energy in the experimental and control groups were significantly higher than those in the blank control group (P < 0.05), and al above indicators showed no significant differences between the experimental and control groups. These results manifest that the calcium phosphate bone cement/fiber protein glue composite material holding a good biocompatibility can promote bone tissue regeneration for bone defect repair, achieving similar curative effect with autologous bone transplantation.

OBJECTIVE To discuss the infection rate of Chlamydia trachomatis(Ct) and Ureaplasma urealyticum(Uu) in patients with non-gonococcal infection.METHODS Fluorescence quantitative PCR method was used on 1025 cases and 30 cases of NGU patients for Ct and Uu detection.RESULTS Of 1025 NGU patients,positive Ct alone accounted for 156 cases,the positive rate was 15.22%.505 cases were separate Uu,the positive rate was 49.27%.Ct,Uu mixed in 217 cases,the positive rate was 21.17%.The detection rate was 85.66%.Uu infection rate in women was more than that in men(?2 = 104.56 P0.05).of control group,the Ct Uu Results negative.CONCLUSIONS In NGH patients,Uu is most common pathgen in man and woman.To diagnosis of NGU,Uu and Ct should be followed by Ct infection rate but no gender tested at the same time to avoid missed diagnosis.

Objective: To investigate the clinical value of GeneXpert in the rapid diagnosis of rifampicin resistance in tuberculosis and extrapulmonary tuberculosis. Methods: From June 2018 to March 2019, a total of 122 tuberculosis patients admitted to the People's Hospital of Yueqing were selected.Among them, 109 patients with pulmonary tuberculosis and 13 patients with extrapulmonary tuberculosis.GeneXpert MTB/RIF, smear, LJ solid medium, BACTEC MGIT 960 liquid medium four detection methods were used to detect tuberculosis secretion.GeneXpert MTB/RIF, LJ solid medium, BACTEC MGIT 960 liquid medium three detection methods were used to detect extrapulmonary tuberculosis secretion.The sensitivity and specificity of GeneXpert MTB/RIF, smear, LJ solid medium, BACTEC MGIT 960 liquid medium for tuberculosis specimens were detected and compared, and the monitoring results of rifampicin resistance in extracorporeal tuberculosis specimens in culture medium detected by GeneXpert MTB/RIF, LJ solid medium, BACTEC MGIT 960 liquid were observed. Results: The GeneXpert MTB/RIF, smear, LJ solid medium, BACTEC MGIT 960 liquid medium were used to detect 109 cases of tuberculosis, and the detection rates were 94.50%(103/109), 55.04%(60/109), 57.79% (63/109), 61.47%(67/109), respectively.The detection rates of extrapulmonary tuberculosis were 7.69%(1/13), 0.00%(0/13) and 15.38%(2/13), respectively.The sensitivity and specificity of the four methods for the diagnosis of tuberculosis had statistically significant differences(χ²=121.540, 127.610, all P<0.05). The diagnostic efficiency of GeneXpert MTB/RIF was significantly better than smear, LJ solid medium, BACTEC MGIT 960 liquid medium.The results of stratification analysis of rifampicin resistance using GeneXpert MTB/RIF, LJ solid medium and BACTEC MGIT 960 liquid medium showed that there were no statistically significant differences among the three methods and gold standard(χ²=0.750, 0.942, 0.947, all P>0.05). Conclusion GeneXpert technology has the advantages of simple operation, rapid detection and high detection rate.It has high clinical value for the rapid diagnosis of tuberculosis and extrapulmonary specimens and the detection of rifampicin resistance.

Objective To explore the application of micro screws in holistic management of comminuted fracture of posterior acetabular wall combined with posterior hip dislocation.Methods From October 2013 to March 2016,38 patients (38 hips) were managed for comminuted fracture of posterior acetabular wall combined with posterior hip dislocation.They were 29 males and 9 females,aged from 15 to 71 years (average,38.6 years).According to the Letournel-Judet classification,there were 35 simple fractures of posterior acetabular wall and 3 complex fractures (2 fractures of posterior column plus posterior wall and one transverse plus posterior wall fracture).All fractures were comminuted and involved the posterior wall.The posterior Kocher-Langenbeck approach was selected for all the patients.Intraoperative exploration revealed the comminuted posterior walls were complicated with broken acetabular rims and ruptured glenoid rims to various degrees.Micro screws or micro screw-plate system were used to repair the comminuted fractures and broken acetabular rims,bridge support fixation with a locking plate followed pelvic reconstruction,and at the same time the ruptured glenoid rims were sutured so that the whole posterior articular structure around the posterior wall was repaired and reconstructed in a holistic manner.Results All the 38 patients were followed up for 12 to 36 months (average,17.6 months).By the Matta assessment,the reduction was excellent in 36 cases and fine in 2,giving an excellent to good rate of 100％.All fractures got united after 9 to 14 weeks (average,10.2 weeks).By the improved Merle d'Aubigne & Postel criteria,the clinical outcome was excellent in 35 cases and good in 3,giving an excellent to good rate of 100％.After surgery,heterotopic ossification occurred in one case,and transient paralysis of the sciatic nerve in 3 cases.No infection,necrosis of the femoral head,joint pain,joint malfunction or unstable walking was observed.Conclusion In the management of comminuted fracture of posterior acetabular wall combined with posterior hip dislocation,the lesions of the whole posterior wall can be repaired primarily in a holistic manner by repairing the shattered posterior wall of the acetabulum wth micro plate and screw system and simultaneous suture and fixation of the broken actabular rim and ruptured glenoid rim.

Objective: To evaluate the efficacy of articular compression molding techniques in the surgery for acetabular posterior wall fracture. Methods: A retrospective study was conducted of the 28 patients (28 hips) with fracture of acetabular posterior wall plus comminuted compression of articular surface who had been treated using the articular compression molding techniques at Department of Orthopedics, The Hospital of 81 Group Army of PLA from January 2014 to January 2018. They were 25 males and 3 females, aged from 26 to 63 years (average, 49.3 years). The time from injury to surgery ranged from 4 to 12 days (average, 7.8 days). According to the Letournel-Judet classification, all were single element (simple) posterior wall fractures combined with posterior dislocation of the femoral head and articular compression of different degrees; transient sciatic nerve injury was complicated in 12 cases. The posterior hip dislocations were timely and successful reset at emergency treatment. The compression fractures of the posterior wall and hip joint were treated by open reduction and internal fixation via the acetabular posterior (K-L) approach. The articular compression was treated by 4 stabilization techniques: absorbable screwing and blocking technique in 10 cases, indwelling screwing in 12 cases, indwelling Kirschner wiring in 2 cases and die push and squeeze tamping in 4 cases. The operation time, intraoperative bleeding and complications were recorded. The therapeutic efficacy was evaluated by the modified Merle d’Aubigne & Postel scoring criteria at the final follow-up. Results: The operation time lasted from 76 to 118 minutes (average, 94.2 minutes); the intraoperative bleeding ranged from 100 to 320 mL (average,220.8 mL). No incision liquefaction, infection or other complications occurred. The 28 patients were followed up for 10 to 36 months (average, 17.6 months). According to the Matta scoring criteria, 24 cases achieved anatomical reduction but 4 dissatisfactory reduction. By the modified Merle d’Aubigne & Postel scoring criteria at the final follow-up, the efficacy was evaluated as excellent in 26 cases and as good in 2. Heterotopic ossification was observed in 3 cases and microscopic free dense shadow in the joint cavity (about 2 mm in the round ligament) in 3 cases. There were no cases of obvious traumatic arthritis or osteoarthritis, femoral head necrosis, walking pain, lameness or hip abduction weakness. The 12 patients complicated with preoperative transient sciatic nerve injury recovered within 3 months after surgery. Conclusion The articular compression molding techniques can effectively treat severely comminuted articular compression in the acetabular posterior wall fracture and improve reduction of articular surface and hip joint matching, leading to stability and good joint function.

Objective To explore the efficacy of temporary titanium plate screwing for positional maintenance in reduction and internal fixation for displaced acetabular fractures.Methods A retrospective study was conducted of the 28 patients (28 hips) with displaced acetabular fracture who had been treated by open reduction and internal fixation from October 2013 to March 2016.They were 20 males and 8 females,aged from 24 to 68 years (average,42.3 years).The time from injury to surgery ranged from 7 to 21 days(average,14.5 days).According to the Letournel-Judet classification,there were 2 posterior column fractures,4 transverse fractures,5 posterior column plus posterior wall fractures,6 transverse plus posterior wall fractures,2 T-shaped fractures,3 anterior and posterior transverse fractures and 6 double column fractures.The posterior acetabular approach or combined anterior and posterior approach was used.In all the patients temporary titanium plate screwing was conducted to fix one side of the fracture so as to facilitate accomplishment of open reduction and internal fixation without losing the indirect anatomic reduction of the intraarticular fracture.After the open reduction and internal fixation was accomplished,the temporary screw fixation was removed in 26 patients but retained in 2 patients as needed.The reduction quality,complications and outcomes at the final follow-ups were recorded.Results All the 28 patients were followed up for 10 to 36 months (mean,15.6 months).By the Matta criteria,anatomical reduction was achieved in 26 cases,unsatisfactory reduction in one and poor reduction in one,yielding an anatomic reduction rate of 92.9％.By the improved Mere d'Aubigne & Postel criteria,the clinical outcomes at the final follow-up were excellent in 27 cases and good in one,yielding a good to excellent rate of 100％.Postoperatively,heterotopic ossification of different severities occurred in 11 cases but did not affect their joint function;transient paralysis of the sciatic nerve was reported in 6 cases but recovered 3 months after surgery.No complications like avascular necrosis of the femoral head or walking pain were observed during follow-ups.Conclusion Temporary fixation with titanium plate screws during open reduction and internal fixation for displaced acetabular fractures can effectively improve the reduction and fixation of the articular surface,leading to satisfactory short-term clinical outcomes.

Objective:To analyse the clinical significance of selective single embryo transfer by time-lapse mo-nitoring(TLM)or conventional morphology assessment(CMA)in vitro fertilization/intracytoplasmic sperm in-jection and embryo transfer(IVF/ICSI-ET),and to initially explore the predictive value of Raman spectral analy-sis of embryo culture medium for clinical pregnancy rate.Methods:The study is a prospective randomized con-trolled clinical trial.We assigned 139 patients treated with IVF/ICSI-ET in Reproductive and Genetics Center of Suzhou Municipal Hospital from April 2019 to July 2020,which were randomly assigned to either the CMA or the TLM group.We performed selective single-embryo transfer(fresh cycle and FET)after selecting the optimal em-bryos with TLM or CMA respectively.If the patient's first embryo transfer was unsuccessful,a second one would be performed to compare the differences in the cumulative live birth rate of embryo transfer and other pregnancy outcomes between the two groups.Meanwhile,we collected 15 μl of embryo culture medium at day 3 after IVF/ISCI fertilization for Raman spectroscopy analysis.Results:There were no differences in cumulative live birth,cu-mulative clinical pregnancy,cumulative premature birth,cumulative early spontaneous abortion,cumulative ectopic pregnancy and LGA or SGA between TLM and CMA groups(P＞0.05).The Neonatal sex ratio in the TLM group was lower than that in the CMA group,but the difference was not significant(P＞0.05).Raman spectros-copy analysis of embryo culture medium predicted the clinical pregnancy rate with 67.21％accuracy.Conclu-sions:In young women with a good ovarian reserve,the advantage of using TLM to evaluate embryos is not obvi-ous,so we should remain vigilant that embryo selection based on morphokinetic parameters may affect the sex ratio.Raman spectroscopic analysis of embryo culture medium is not yet able to effectively predict the planting ability of embryos.