OBJECTIVE: To compare the biomechanical properties of four internal fixation methods in a lower cervical spine injury model using the finite element method. METHODS: Cervical CT data of a 28-year-old healthy adult male were utilized to establish a finite element model of the normal cervical spine and a lower cervical spine three-column injury model. Four internal fixation methods were then applied to the three-column injury model, resulting in four groups:Group A, anterior cervical locked-plate(ACLP) fixation system model(anterior approach);Group B, posterior cervical pedicle screw fixation model (posterior approach);Group C, combined anterior and posterior cervical pedicle screw fixation model; Group D, Novel composite anterior cervical internal fixation model. A 75 N axial compressive load and a 1.0 N·m pure moment were applied to the upper surface of the cervical spine model to simulate flexion, extension, rotation, and lateral bending movements. The intervertebral range of motion(ROM) and stress distribution of the internal fixators under different motion conditions were compared across all models. RESULTS: Compared with the normal model, the reductions in overall intervertebral ROM for each group under flexion, extension, rotation, and lateral bending were as follows:Group A, 24.04°, 23.12°, 6.24°, and 9.06°;Group B, 24.42°, 24.34°, 6.48°, and 9.20°;Group C, 25.43°, 25.29°, 7.17°, and 9.57°;Group D, 24.75°, 25.5°, 6.71°, and 9.12°. The peak stress values of the internal fixators in each group were:Group A, 53.9 MPa, 79.9 MPa, 61.4 MPa, and 80.3 MPa;Group B, 218.3 MPa, 105.4 MPa, 206.6 MPa, and 186.8 MPa;Group C, 40.8 MPa, 97.2 MPa, 47.1 MPa, and 39.4 MPa;Group D, 93.0 MPa, 144.0 MPa, 64.8 MPa, and 106.3 MPa. CONCLUSION The biomechanical properties of the novel composite anterior cervical internal fixation method are similar to those of the combined anterior-posterior fixation method, and superior to both the anterior cervical ACLP plate-screw fixation and posterior cervical pedicle screw fixation methods.
Humans ; Finite Element Analysis ; Cervical Vertebrae/physiopathology* ; Male ; Biomechanical Phenomena ; Adult ; Fracture Fixation, Internal/methods* ; Range of Motion, Articular

Objective To investigate the feasibility of mimics software in analyzing a new type of complex anterior cervical fixation—anterior transpedicular screw fixation+zero notch internal fixation.Methods From January 2021 to September 2022,50 normal pedestrians who underwent cervical spine CT scanning were selected for C1-C7 segment scanning,including 27 males and 23 females,aged from 25 to 65 years old with an average of(46.0±9.0)years old.The dicom format is exported and engraved into the CD,and use the mimics software to perform 3D reconstruction of each segment.A simulated screw is placed on the image according to the critical value of zero notch screw(head and tail angle 44°,internal angle 29°).The posi-tion of zero notch screw in each segment is observed to determine the feasibility of anterior transpedicular screw fixation plus zero notch internal fixation.Results For the upper zero notch screws the three-dimensional images of the cervical spine across all 50 subjects within the C3-C7 segments demonstrated safe position,wwith no instances of intersection with ATPS.For the lower zero notch screw,in C3-C4 and C4-C5,4 out of 50 subjects are in the safe position in the three-dimensional images of cervical ver-tebrae,and 46 cases could achieve secure screw placement when the maximum caudal angle is(32.3±1.9)° and(36.1±2.2)°,respectively.In C5-C6 and C6-C7 segments,no lower zero notch screws intersected with ATPS,and all screws are in safe posi-tions.Conclusion Lower cervical anterior pedicle screw fixation plus zero notch internal fixation can achieve successful nail placement through the selected entry point and position.

The incidence of osteoporotic thoracolumbar vertebral fracture (OTLVF) in the elderly is gradually increasing. The kyphotic deformity caused by various factors has become an important characteristic of OTLVF and has received increasing attention. Its clinical manifestations include pain, delayed nerve damage, sagittal imbalance, etc. Currently, the definition and diagnosis of OTLVF with kyphotic deformity in the elderly are still unclear. Although there are many treatment options, they are controversial. Existing guidelines or consensuses pay little attention to this type of fracture with kyphotic deformity. To this end, the Lumbar Education Working Group of the Spine Branch of the Chinese Medicine Education Association and Editorial Committee of Chinese Journal of Trauma organized the experts in the relevant fields to jointly develop Clinical guidelines for the diagnosis and treatment of osteoporotic thoracolumbar vertebral fractures with kyphotic deformity in the elderly ( version 2024), based on evidence-based medical advancements and the principles of scientificity, practicality, and advanced nature, which provided 18 recommendations to standardize the clinical diagnosis and treatment.

This guideline aims to promote the prudent use of antibacterial agents for managing carbapenem-resistant Enterobacterales (CRE) infections in clinical practice in Korea. The general section encompasses recommendations for the management of common CRE infections and diagnostics, whereas each specific section is structured with key questions that are focused on antibacterial agents and disease-specific approaches. This guideline covers both currently available and upcoming antibacterial agents in Korea.

This guideline aims to promote the prudent use of antibacterial agents for managing carbapenem-resistant Enterobacterales (CRE) infections in clinical practice in Korea. The general section encompasses recommendations for the management of common CRE infections and diagnostics, whereas each specific section is structured with key questions that are focused on antibacterial agents and disease-specific approaches. This guideline covers both currently available and upcoming antibacterial agents in Korea.

This guideline aims to promote the prudent use of antibacterial agents for managing carbapenem-resistant Enterobacterales (CRE) infections in clinical practice in Korea. The general section encompasses recommendations for the management of common CRE infections and diagnostics, whereas each specific section is structured with key questions that are focused on antibacterial agents and disease-specific approaches. This guideline covers both currently available and upcoming antibacterial agents in Korea.

BACKGROUND: Current tendon and ligament reconstruction surgeries rely on scar tissue healing which differs from native bone-to-tendon interface (BTI) tissue. We aimed to engineer Synovium-derived mesenchymal stem cells (Sy-MSCs) based scaffold-free fibrocartilage constructs and investigate in vivo bone–tendon interface (BTI) healing efficacy in a rat anterior cruciate ligament (ACL) reconstruction model. METHODS: Sy-MSCs were isolated from knee joint of rats. Scaffold-free sy-MSC constructs were fabricated and cultured in differentiation media including TGF-b-only, CTGF-only, and TGF-b + CTGF. Collagenase treatment on tendon grafts was optimized to improve cell-to-graft integration. The effects of fibrocartilage differentiation and collagenase treatment on BTI integration was assessed by conducting histological staining, cell adhesion assay, and tensile testing. Finally, histological and biomechanical analyses were used to evaluate in vivo efficacy of fibrocartilage construct in a rat ACL reconstruction model. RESULTS: Fibrocartilage-like features were observed with in the scaffold-free sy-MSC constructs when applying TGF-band CTGF concurrently. Fifteen minutes collagenase treatment increased cellular attachment 1.9-fold compared to the Control group without affecting tensile strength. The failure stress was highest in the Col + D + group (22.494 ± 13.74 Kpa) compared to other groups at integration analysis in vitro. The ACL Recon + FC group exhibited a significant 88% increase in estimated stiffness (p = 0.0102) compared to the ACL Recon group at the 4-week postoperative period. CONCLUSION Scaffold-free, fibrocartilage engineering together with tendon collagenase treatment enhanced fibrocartilaginous BTI healing in ACL reconstruction.

The successful development and application of mRNA COVID-19 vaccine fully illustrated the great potential and application prospect of mRNA technology in the field of biomedicine. Currently, many companies worldwide are developing drugs and vaccines based on mRNA technology for the prevention and treatment of various diseases. It can be foreseen that with the continuous launch of mRNA drugs, commercial GMP production capacity matching them is also urgent. The optimization of production processes, intelligent manufacturing and other risk control strategies, as well as the control of industrialization costs, will help improve the core competitiveness of mRNA innovative drug development. In view of this, this article will provide an overview of the global production process of mRNA drugs and the progress of related GMP production dynamics, sort out the key chain points of the mRNA industry chain, explore the construction of the mRNA pharmaceutical enterprise value chain and the formation of core competitiveness, and provide reference and reference for the research and development of innovative mRNA drugs and high-quality development in China.

Objective: The purpose of this study was to determine the type of video laryngoscope training that is appropriate for emergency medical technicians (EMT) familiar with direct laryngoscopes, to prepare them for tracheal intubation while they are wearing personal protective equipment (PPE). Methods: Thirty-eight healthy EMTs were recruited. The participants underwent two tests with four different laryngoscopes: Macintosh, McGrath, Pentax Airway Scope (PENTAX-AWS), and A-LRYNGO. The first test was conducted just after a lecture without any hands-on workshops. The second test was conducted after a hands-on workshop. In each test, we measured the time required for tracheal intubation, intubation success rate, etc., and asked all the participants to respond to a short questionnaire. Results: The time to complete the insertion of the endotracheal tube with the Macintosh laryngoscope did not significantly change (P=0.098), but the rest of the outcomes significantly improved after the hands-on workshop (all P<0.05). Despite the unfamiliarity of the practitioners with video laryngoscopes and their wearing PPE, intubation-related performances were good with the two-channel type video laryngoscopes after the hands-on workshop (all P<0.05). Conclusion In preparation for an infectious disease pandemic such as the coronavirus disease 2019 (COVID-19), it would be reasonable to train EMTs who would be wearing PPE on the procedure for intubating a trachea with a channeltype video laryngoscope.

This paper reviews the researches on acupuncture preconditioning before surgery in recent years and explores its application value from three aspects, i.e. relieving preoperative anxiety, preventing from postoperative cognitive dysfunction, and preventing from postoperative gastrointestinal dysfunction. As a relatively safe non-drug treatment, acupuncture has the underlying advantages in participating into multidisciplinary coordination in the enhanced recovery after surgery (ERAS). By building up higher-quality medical evidences and revealing the effect mechanism of acupuncture from multi-dimenisonal aspects, it is expected that acupuncture technology can be coordinated with ERAS to optimize the clinical path in the perioperative period, and boost the development of the perioperative medicine ultimately.
Humans ; Acupuncture Therapy ; Anxiety ; Anxiety Disorders ; Enhanced Recovery After Surgery ; Perioperative Period