Moringa oleifera, widely utilized in Ayurvedic medicine, is recognized for its leaves, seeds, and velamen possessing traditional effects such as vātahara(wind alleviation), sirovirecaka(brain clearing), and hridya(mental nourishment). This study aims to identify the medicinal part of ■ in the Sārasvata ghee formulation as described in the Bower Manuscript, while investigating the ameliorative effects of different medicinal parts of M. oleifera on learning and memory deficits in mice and elucidating the underlying molecular mechanisms. A total of 144 male ICR mice were randomly assigned to the following groups: control, model(scopolamine hydrobromide, Sco, 2 mg·kg~(-1)), donepezil(donepezil hydrochloride, Don, 3 mg·kg~(-1)), M. oleifera leaf low-, medium-, and high-dose groups(0.5, 1, 2 g·kg~(-1)), M. oleifera seeds low-, medium-, and high-dose groups(0.25, 0.5, 1 g·kg~(-1)), and M. oleifera velamen low-, medium-, and high-dose groups(0.31, 0.62, 1.24 g·kg~(-1)). Learning and memory abilities were assessed using the passive avoidance test and Morris water maze. Nissl and HE staining were employed to examine histopathological changes in the hippocampus. Transcriptomics and targeted metabolomics were used to screen differential genes and metabolites, with MetaboAnalyst 6.0 and O2PLS methods applied to identify key disease-related targets and pathways. RESULTS:: demonstrated that M. oleifera leaf(1 g·kg~(-1)) significantly ameliorated Sco-induced learning and memory deficits, outperforming M. oleifera seeds(0.25 g·kg~(-1)) and M. oleifera velamen(1.24 g·kg~(-1)). This was evidenced by improved behavioral performance, reversal of neuronal damage, and reduced acetylcholinesterase(AChE) activity. Multi-omics analysis revealed that M. oleifera leaf upregulated Tuba1c gene expression through the synaptic vesicle cycle, enhancing glutamate(Glu), dopamine(DA), and acetylcholine(ACh) release via Tuba1c-Glu associations for neuroprotection. M. oleifera seeds targeted the dopaminergic synapse pathway, promoting memory consolidation through Drd2-ACh associations. M. oleifera velamen was associated with the cocaine addiction pathway, modulating dopamine metabolism via Adora2a-DOPAC, with limited relevance to learning and memory. In conclusion, M. oleifera leaf exhibits superior efficacy and mechanistic advantages over M. oleifera seeds and velamen, suggesting that the ■ in the Sārasvata ghee formulation is likely M. oleifera leaf, providing scientific evidence for its identification in ancient texts.
Animals ; Moringa oleifera/chemistry* ; Male ; Mice ; Seeds/chemistry* ; Plant Leaves/chemistry* ; Mice, Inbred ICR ; Memory Disorders/psychology* ; Transcriptome/drug effects* ; Memory/drug effects* ; Learning/drug effects* ; Metabolomics ; Humans ; Drugs, Chinese Herbal/administration & dosage* ; Maze Learning/drug effects*

OBJECTIVE: To evaluate the feasibility and short-term effectiveness of three-dimensional (3D)-printed customized porous acetabular components for reconstruction of extensive acetabular bone defects during primary total hip arthroplasty (THA). METHODS: The clinical data of 8 patients with extensive acetabular bone defects, who were treated with 3D-printed individualized porous acetabular components between July 2018 and January 2022, were retrospectively analyzed. The cohort comprised 4 males and 4 females with an average age of 48 years ranging from 34 to 56 years. Acetabular bone defects were classified as Paprosky type ⅢA in 3 cases and type ⅢB in 5 cases. The causes of acetabular destruction were hip tuberculosis (5 cases), pigmented villonodular synovitis (2 cases), and syphilitic arthritis (1 case). Visual analogue scale (VAS) score and Harris hip score (HHS) were used to evaluate the pain relief and hip function before and after operation. Reconstruction outcomes were further assessed by imaging results [X-ray film and Tomosynthesis Shimadzumetal artefact reduction technology (T-SMART)], and the mechanical properties were evaluated by finite element analysis. RESULTS: The operation time ranged from 174 to 195 minutes (mean, 187 minutes), and intraoperative blood loss ranged from 390 to 530 mL (mean, 465 mL). All 8 patients were follow-up 26-74 months (mean, 44 months). Among the 5 patients with tuberculosis, none experienced postoperative recurrence. At last follow-up, the VAS score was 0.3±0.5 and the HHS score was 87.9±3.7, both significantly improved compared to preoperative values ( t=25.170, P<0.001; t=-28.322, P<0.001). X-ray films at 2 years after operation demonstrated satisfactory matching between the 3D-printed customized acetabular component and the acetabulum. The postoperative center of rotation of the operated hip was shifted by (2.1±0.5) mm horizontally and (2.0±0.7) mm vertically relative to the contralateral side, with both offsets showing significant differences compared to preoperative values ( t=24.700, P<0.001; t=55.230, P<0.001). T-SMART imaging showed satisfactory osseointegration at the implant-host bone interface. No complications such as aseptic loosening or screw breakage was observed during follow-up. Finite element analysis showed that the acetabular component had good mechanical properties. CONCLUSION The application of 3D-printed individualized porous acetabular components in the reconstruction of extensive acetabular bone defects demonstrated precise anatomical reconstruction, stable mechanical support, and good functional performance in short-term follow-up, offering a potential alternative for acetabular defect reconstruction in primary THA.
Humans ; Middle Aged ; Male ; Female ; Printing, Three-Dimensional ; Arthroplasty, Replacement, Hip/instrumentation* ; Acetabulum/diagnostic imaging* ; Adult ; Follow-Up Studies ; Retrospective Studies ; Hip Prosthesis ; Prosthesis Design ; Porosity ; Treatment Outcome ; Plastic Surgery Procedures/methods*

Hypertrophic cardiomyopathy (HCM) is a major contributor to cardiovascular diseases (CVD), the leading cause of death globally. HCM can precipitate heart failure (HF) by causing the cardiac tissue to weaken and stretch, thereby impairing its pumping efficiency. Moreover, HCM increases the risk of atrial fibrillation, which in turn elevates the likelihood of thrombus formation and stroke. Given these significant clinical ramifications, research into the etiology and pathogenesis of HCM is intensifying at multiple levels. In this review, we discuss and synthesize the latest findings on HCM pathogenesis, drawing on key experimental studies conducted both in vitro and in vivo. We also offer our insights and perspectives on these mechanisms, while highlighting the limitations of current research. Advancing fundamental research in this area is essential for developing effective therapeutic interventions and enhancing the clinical management of HCM.
Cardiomyopathy, Hypertrophic/physiopathology* ; Humans ; Animals

Japanese spotted fever(JSF)is an infectious disease caused by Rickettsia japonica,with nonspecific clinical symptoms and a high risk of misdiagnosis.We reported a case of JSF,in which Rickettsia japonica was detected in blood cells by metagenomic next-generation sequencing.The patient recovered after treatment with doxycycline.This report provides a reference for the clinical diagnosis and treatment of JSF.
Humans ; High-Throughput Nucleotide Sequencing ; Metagenomics ; Rickettsia/isolation & purification* ; Spotted Fever Group Rickettsiosis/microbiology*

Sesquiterpenoids are widely found in nature, while nitrobenzoyl sesquiterpenoids are relatively rare. Twelve natural nitrobenzoyl sesquiterpenoids were all derived from marine Aspergillus fungi, which are typical natural products with marine characteristics. These natural products exhibit good antitumor, antiviral, and inhibition of osteoclast differentiation activity, especially in the treatment of osteoclast-related diseases, showing good medicinal development value. This article reviews the natural product sources, chemical structure, chemical synthesis, biosynthesis, bioactivity, and pharmacological mechanisms of nitrobenzoyl sesquiterpenoids and predicts and discusses their absorption, distribution, metabolism, excretion, toxicity (ADME/T), and drug-likeness, providing a comprehensive understanding of the natural products of nitrobenzoyl sesquiterpenoids from marine sources and their potential for pharmaceutical development.

BACKGROUND:At present,the use of a locking bone plate combined with steel wire or steel cable for the treatment of periprosthetic femoral fracture often adopts monocortical fixation,which is not stable and the proximal end of the bone cannot be achieved anatomically fitted by plate.The customized anatomical plate system can effectively solve this problem. OBJECTIVE:To explore the biomechanical strength of a customized anatomical plate system in fixation of Vancouver BI periprosthetic femoral fracture. METHODS:CT thin layer scanning data of normal femurs of 1 006 cases were selected and input into the MIMICS 21.0 software to establish the three-dimensional reconstruction model of the femur,which was set as the three-dimensional reconstruction group.56 complete human femoral specimens were selected as the femoral specimen group.The measured results of the two groups for femoral anatomical appearance were compared.If there was no significant difference between the two groups,the approximate appearance of a customized anatomical plate system was designed based on the measurement results in MIMICS 21.0 software and NX11.0 software.The customized anatomical plate system was designed and prepared according to the above measurement results.Eight pairs of frozen human femurs were selected to make Vancouver BI periprosthetic femoral fracture,which of the left were thin layer scanned by dual-source CT to obtain data.The data were transferred to determine the customized anatomical plate system model by the above design software.Eight sets of customized anatomical plate systems were ultimately produced,relying on the instrument company.The eight pairs of models were numbered 1-8.The left side was fixed with the customized anatomical plate system(customized anatomical plate system group);the right side was fixed with a metal locking plate system-large locking plate(claw plate group).L1-L4 and R1-R4 were subjected to vertical short-cycle loading test and vertical loading test.L5-L8 and R5-R8 were subjected to horizontal short-cycle loading test and four-point bending test.The vertical loading test and four-point bending test were used to collect bending load,bending displacement,and bending strain.Two short cycle loading tests were used to collect strain displacement to compare the maximum load,maximum displacement,bending stiffness,and short-period displacement resistance of the two kinds of bone plates. RESULTS AND CONCLUSION:(1)There were no significant differences in all indexes between the three-dimensional reconstruction group and the femoral specimen group(P>0.05).Individual customized anatomical plate system was designed based on the measurement results combined with digital software.(2)In the vertical loading test,the maximum load was higher(P=0.015),the maximum bending displacement was smaller(P=0.014),and the bending stiffness was higher(P=0.005)in the customized anatomical plate system group compared with the claw plate group.(3)In the four-point bending test,the maximum load was higher(P=0.023),the bending stiffness was higher(P=0.005),and the maximum bending displacement was not significant(P=0.216>0.05)in the customized anatomical plate system group compared with the claw plate group.(4)In the vertical short-cycle loading test,the average level of bending displacement in the customized anatomical plate system group(0.23±0.10 mm)was significantly lower than that in the claw plate group(0.44±0.02 mm)(P<0.05).(5)There was no significant difference in the average level of bending displacement between the two groups in the horizontal short cycle loading test(P>0.05).(6)It is concluded that the customized anatomical plate system has personalized anatomical characteristics,and the fixation of Vancouver BI periprosthetic femoral fracture is more stable,which has certain significance for clinical treatment.

Human-animal interaction has a long-standing tradition dating back to ancient times. With the rapid advancements in intelligent chips, wearable devices, and machine algorithms, the intelligent interaction between animals and electronic technology, facilitated by electronic devices and systems for communication, perception, and control, has become a reality. These electronic devices aim to implement an animal-centric working mode to enhance human understanding of animals and promote the development of animal intelligence and creativity. This article takes medium-sized and large animals as research objects, with the goal of developing their ability enhancement, and introduces the concept of “intelligent animal augmentation system (IAAS)”. This concept is used to describe the characteristics of such devices and provides a comprehensive overview of existing animal and computer interface solutions. In general, IAAS can be divided into implantable and non-implantable types, each composed of interface platforms, perception and interpretation, control and instruction components. Through various levels of enhancement systems and architectural patterns, intelligent interaction between humans and animals can be realized. Although existing IAAS still lack a complete independent interaction system architecture, they hold great promise and development space in the future. Not only can they be applied as substitutes for cutting-edge devices and transportation equipment, but they are also expected to achieve cross-species information interaction through intelligent interconnection. Additionally, IAAS can promote bidirectional interaction between humans and animals, playing a significant role in advancing animal ethics and ecological protection. Furthermore, the development of interaction models based on animal subjects can provide insightful research experiences for the design of human-computer interaction systems, thereby contributing to the more efficient realization of the ambitious goal of human-machine integration.

Objective:To investigate the iodine nutrition level and thyroid function status of pregnant women in Hubei Province.Methods:According to the requirements of "the National Iodine Deficiency Disorders Monitoring Program (2016 Edition)", in 2020, using a cross-sectional survey method, two mountainous counties and two plain areas in Hubei Province were divided into five districts: east, west, south, north, and central. One township (street) was selected from each district, and 20 pregnant women were selected from each township (street) as survey subjects. Urine iodine content and thyroid function indicators [serum free triiodothyronine (FT 3), free thyroxine (FT 4), thyroid-stimulating hormone (TSH), thyroid peroxidase antibody (TPOAb), thyroglobulin antibody (TgAb)] were tested. Abnormal thyroid function rate and antibody positive rate were analyzed, and correlation analysis of thyroid function indicators was conducted (Spearman method). Results:A total of 321 pregnant women were included, including 43, 114, and 164 in early, middle, and late pregnancy, respectively; The median urinary iodine was 164.80 μg/L. The median serum FT 3, FT 4, TSH, TPOAb, TgAb levels were 4.10, 12.83 pmol/L, 1.85 mU/L, 15.84 and 13.35 U/ml, respectively. There were statistically significant differences in FT 3, FT 4, and TSH levels among different trimesters ( P < 0.05). According to Spearman's correlation analysis, FT 3 in early stage of pregnancy was negatively correlated with TSH and TPOAb levels ( r = - 0.46, - 0.33, P < 0.05), while TSH was positively correlated with TPOAb level ( r = 0.33, P = 0.032); there was a positive correlation between FT 4 and TgAb levels in middle stage of pregnancy ( r = 0.21, P = 0.032); there was a negative correlation between FT 3 and TPOAb levels in late stage of pregnancy ( r = - 0.19, P = 0.017); FT 3 and FT 4, TPOAb and TgAb levels were positively correlated throughout pregnancy ( P < 0.05). There was no correlation between urinary iodine content and thyroid function indicators ( P > 0.05). The total abnormal rate of thyroid function was 7.79% (25/321), with 16.28% (7/43), 5.26% (6/114), and 7.32% (12/164) in early, middle, and late pregnancy, respectively. There was no statistically significant difference in the abnormal rate of thyroid function among different pregnancy periods (χ 2 = 4.83, P = 0.097). The detection rates of hypothyroxinemia, hypothyroidism, subclinical hypothyroidism, hyperthyroidism, and subclinical hyperthyroidism were 4.36% (14/321), 0.31% (1/321), 2.49% (8/321), 0.31% (1/321), and 0.31% (1/321), respectively. The positive detection rate of autospecific antibodies was 10.28% (33/321), with a TPOAb positive detection rate of 9.97% (32/321) and a TgAb positive detection rate of 5.30% (17/321). Conclusions:The iodine nutrition level of pregnant women in Hubei Province is at a suitable level, and the rates of abnormal thyroid function and thyroid autospecific antibody positive are relatively low. It is necessary to continuously monitor the iodine nutrition and thyroid function indexes of pregnant women, strengthen health education on the hazards of iodine deficiency during pregnancy, and minimize the harm to maternal and infant health caused by iodine deficiency.

Objective To explore the efficacy and safety of recombinant human anti-severe acute respiratory syn-drome coronavirus 2(anti-SARS-CoV-2)monoclonal antibody injection(F61 injection)in the treatment of patients with coronavirus disease 2019(COVID-19)combined with renal damage.Methods Patients with COVID-19 and renal damage who visited the PLA General Hospital from January to February 2023 were selected.Subjects were randomly divided into two groups.Control group was treated with conventional anti-COVID-19 therapy,while trial group was treated with conventional anti-COVID-19 therapy combined with F61 injection.A 15-day follow-up was conducted after drug administration.Clinical symptoms,laboratory tests,electrocardiogram,and chest CT of pa-tients were performed to analyze the efficacy and safety of F61 injection.Results Twelve subjects(7 in trial group and 5 in control group)were included in study.Neither group had any clinical progression or death cases.The ave-rage time for negative conversion of nucleic acid of SARS-CoV-2 in control group and trial group were 3.2 days and 1.57 days(P=0.046),respectively.The scores of COVID-19 related target symptom in the trial group on the 3rd and 5th day after medication were both lower than those of the control group(both P＜0.05).According to the clinical staging and World Health Organization 10-point graded disease progression scale,both groups of subjects improved but didn't show statistical differences(P＞0.05).For safety,trial group didn't present any infusion-re-lated adverse event.Subjects in both groups demonstrated varying degrees of elevated blood glucose,elevated urine glucose,elevated urobilinogen,positive urine casts,and cardiac arrhythmia,but the differences were not statistica-lly significant(all P＞0.05).Conclusion F61 injection has initially demonstrated safety and clinical benefit in trea-ting patients with COVID-19 combined with renal damage.As the domestically produced drug,it has good clinical accessibility and may provide more options for clinical practice.