AIM:To investigate the therapeutic effects of botulinum toxin A(BTXA)injection versus strabismus surgery in the treatment of acute acquired comitant esotropia(AACE).METHODS:Patient records of AACE cases treated at First People's Hospital of Nantong from January 2019 to September 2023 were retrospectively analyzed in this study. Patients were categorized into either strabismus surgery or BTXA injection groups based on treatment modality. Further stratification was performed according to preoperative deviation angles [>35 prism diopters(PD)vs ≤35 PD] and age(≥18 years adult group vs <18 years adolescent group). The baseline patient characteristics were collected, deviation angles at multiple timepoints before and after treatment were measured, and stereopsis test results were documented. Through comparative analysis of therapeutic outcomes across subgroups, we systematically evaluated the efficacy of different treatment approaches.RESULTS:A total of 43 AACE patients were included. At the final follow-up, both the surgery and BTXA injection groups showed a statistically significant decrease in deviation angle compared to pretreatment measurements(P<0.001). Significant differences were noted between the two groups in terms of the cure rate of strabismus and the recovery rate of stereopsis(P<0.05). For patients with deviations >35 PD, surgery yielded significantly better outcomes than injection therapy in postoperative angle, success rate, and stereopsis recovery(P<0.05). Similarly, in patients aged ≥18 years, surgical treatment was superior to injections in reducing strabismus angle, improving success rates, and restoring stereopsis(P<0.05).CONCLUSION:Both BTXA injection and strabismus surgery demonstrate therapeutic efficacy in AACE. Surgical treatment demonstrated superior efficacy compared to BTXA injection therapy, particularly in patients with deviations >35 PD and those aged ≥18 years. For patients with angles ≤35 PD or under 18 years, BTXA injection remains a viable treatment option.

OBJECTIVE: To observe the clinical efficacy of Qihuang needle therapy for autism spectrum disorder (ASD) children with sleep disorder. METHODS: A total of 60 ASD children with sleep disorder were randomly divided into an observation group and a control group, 30 cases in each group. Both groups were treated with structured education intervention, 60 min each time, once a day, 6 times a week. Qihuang needle therapy was applied at Yintang (GV24⁺), Baihui (GV20) and bilateral Jueyinshu (BL14), Xinshu (BL15) in the observation group, multi-direction needling was delivered and without needle retaining. The treatment was given 2 times a week, each treatment was delivered at interval of 2 days at least. Behavioral intervention was adopted in the control group. Treatment for consecutive 12 weeks was required in both groups. Before and after treatment, the scores of children's sleep habits questionnaire (CSHQ), the autism behavior checklist (ABC), the childhood autism rating scale (CARS), and the childhood autism behavior scale (CABS) were observed in the two groups. RESULTS: After treatment, the scores of CSHQ, ABC, CARS and CABS were decreased compared with those before treatment (P<0.01), and the above scores in the observation group were lower than those in the control group (P<0.05). CONCLUSION Qihuang needle therapy can effectively treat ASD with sleep disorder, improve the core symptoms of ASD and the sleep quality.
Humans ; Autism Spectrum Disorder/physiopathology* ; Male ; Female ; Child ; Sleep Wake Disorders/physiopathology* ; Child, Preschool ; Acupuncture Therapy ; Acupuncture Points ; Treatment Outcome ; Sleep ; Needles

Following the release of the Technical Requirements on Quality Control and Standard Establishment of Traditional Chinese Medicine Formula Granules by the National Medical Products Administration in 2021, Chinese Pharmacopoeia Commission has promulgated 296 national drug standards so far, and most provinces have started the work of establishing provincial standards as supplements. The promulgation of standards fostered high-quality development of the industry. Since the implementation of national and provincial standards for more than three years, enterprises have gained deep understanding and hands-on experiences on the characteristics, technical requirements, production process, and quality control of traditional Chinese medicine(TCM) formula granules. Meanwhile, challenges have emerged restricting the high-quality development of this industry, including how to formulate quality control strategies for medicinal materials and decoction pieces, how to reduce manufacturing costs, and how to improve the pass rate and product stability under high standards. Based on the work experiences from standard management and process research, this article analyzed the distribution of sources, processing methods, dry extract rate ranges, process requirements for volatile oil-containing decoction pieces, control measures of safety indices, characteristics and trends of setting characteristic chromatograms or fingerprints, characteristics and trends of setting content ranges, and main differences between national standards and provincial standards. On the one hand, this article aims to present main characteristics for deeply understanding different indicators in standards and provide basic ideas for establishing quality and process control systems. On the other hand, from the perspective of industrial practice, suggestions are put forward on the important aspects that need to be focused on in the quality and process control of TCM formula granules.
Drugs, Chinese Herbal/chemistry* ; Quality Control ; Medicine, Chinese Traditional/standards* ; China ; Drug Industry/standards*

OBJECTIVE: To evaluate the feasibility and short-term effectiveness of three-dimensional (3D)-printed customized porous acetabular components for reconstruction of extensive acetabular bone defects during primary total hip arthroplasty (THA). METHODS: The clinical data of 8 patients with extensive acetabular bone defects, who were treated with 3D-printed individualized porous acetabular components between July 2018 and January 2022, were retrospectively analyzed. The cohort comprised 4 males and 4 females with an average age of 48 years ranging from 34 to 56 years. Acetabular bone defects were classified as Paprosky type ⅢA in 3 cases and type ⅢB in 5 cases. The causes of acetabular destruction were hip tuberculosis (5 cases), pigmented villonodular synovitis (2 cases), and syphilitic arthritis (1 case). Visual analogue scale (VAS) score and Harris hip score (HHS) were used to evaluate the pain relief and hip function before and after operation. Reconstruction outcomes were further assessed by imaging results [X-ray film and Tomosynthesis Shimadzumetal artefact reduction technology (T-SMART)], and the mechanical properties were evaluated by finite element analysis. RESULTS: The operation time ranged from 174 to 195 minutes (mean, 187 minutes), and intraoperative blood loss ranged from 390 to 530 mL (mean, 465 mL). All 8 patients were follow-up 26-74 months (mean, 44 months). Among the 5 patients with tuberculosis, none experienced postoperative recurrence. At last follow-up, the VAS score was 0.3±0.5 and the HHS score was 87.9±3.7, both significantly improved compared to preoperative values ( t=25.170, P<0.001; t=-28.322, P<0.001). X-ray films at 2 years after operation demonstrated satisfactory matching between the 3D-printed customized acetabular component and the acetabulum. The postoperative center of rotation of the operated hip was shifted by (2.1±0.5) mm horizontally and (2.0±0.7) mm vertically relative to the contralateral side, with both offsets showing significant differences compared to preoperative values ( t=24.700, P<0.001; t=55.230, P<0.001). T-SMART imaging showed satisfactory osseointegration at the implant-host bone interface. No complications such as aseptic loosening or screw breakage was observed during follow-up. Finite element analysis showed that the acetabular component had good mechanical properties. CONCLUSION The application of 3D-printed individualized porous acetabular components in the reconstruction of extensive acetabular bone defects demonstrated precise anatomical reconstruction, stable mechanical support, and good functional performance in short-term follow-up, offering a potential alternative for acetabular defect reconstruction in primary THA.
Humans ; Middle Aged ; Male ; Female ; Printing, Three-Dimensional ; Arthroplasty, Replacement, Hip/instrumentation* ; Acetabulum/diagnostic imaging* ; Adult ; Follow-Up Studies ; Retrospective Studies ; Hip Prosthesis ; Prosthesis Design ; Porosity ; Treatment Outcome ; Plastic Surgery Procedures/methods*

BACKGROUND: Non-invasive computed tomography angiography (CTA)-based fractional flow reserve (CT-FFR) could become a gatekeeper to invasive coronary angiography. Deep learning (DL)-based CT-FFR has shown promise when compared to invasive FFR. To evaluate the performance of a DL-based CT-FFR technique, DeepVessel FFR (DVFFR). METHODS: This retrospective study was designed for iScheMia Assessment based on a Retrospective, single-center Trial of CT-FFR (SMART). Patients suspected of stable coronary artery disease (CAD) and undergoing both CTA and invasive FFR examinations were consecutively selected from the Beijing Anzhen Hospital between January 1, 2016 to December 30, 2018. FFR obtained during invasive coronary angiography was used as the reference standard. DVFFR was calculated blindly using a DL-based CT-FFR approach that utilized the complete tree structure of the coronary arteries. RESULTS: Three hundred and thirty nine patients (60.5 ±10.0 years and 209 men) and 414 vessels with direct invasive FFR were included in the analysis. At per-vessel level, sensitivity, specificity, accuracy, positive predictive value (PPV) and negative predictive value (NPV) of DVFFR were 94.7%, 88.6%, 90.8%, 82.7%, and 96.7%, respectively. The area under the receiver operating characteristics curve (AUC) was 0.95 for DVFFR and 0.56 for CTA-based assessment with a significant difference (P < 0.0001). At patient level, sensitivity, specificity, accuracy, PPV and NPV of DVFFR were 93.8%, 88.0%, 90.3%, 83.0%, and 95.8%, respectively. The computation for DVFFR was fast with the average time of 22.5 ± 1.9 s. CONCLUSIONS The results demonstrate that DVFFR was able to evaluate lesion hemodynamic significance accurately and effectively with improved diagnostic performance over CTA alone. Coronary artery disease (CAD) is a critical disease in which coronary artery luminal narrowing may result in myocardial ischemia. Early and effective assessment of myocardial ischemia is essential for optimal treatment planning so as to improve the quality of life and reduce medical costs.

Purpose::Mannitol is one of the first-line drugs for reducing cerebral edema through increasing the extracellular osmotic pressure. However, long-term administration of mannitol in the treatment of cerebral edema triggers damage to neurons and astrocytes. Given that neural stem cell (NSC) is a subpopulation of main regenerative cells in the central nervous system after injury, the effect of mannitol on NSC is still elusive. The present study aims to elucidate the role of mannitol in NSC proliferation.Methods::C57 mice were derived from the animal house of Zunyi Medical University. A total of 15 pregnant mice were employed for the purpose of isolating NSCs in this investigation. Initially, mouse primary NSCs were isolated from the embryonic cortex of mice and subsequently identified through immunofluorescence staining. In order to investigate the impact of mannitol on NSC proliferation, both cell counting kit-8 assays and neurospheres formation assays were conducted. The in vitro effects of mannitol were examined at various doses and time points. In order to elucidate the role of Aquaporin 4 (AQP4) in the suppressive effect of mannitol on NSC proliferation, various assays including reverse transcription polymerase chain reaction, western blotting, and immunocytochemistry were conducted on control and mannitol-treated groups. Additionally, the phosphorylated p38 (p-p38) was examined to explore the potential mechanism underlying the inhibitory effect of mannitol on NSC proliferation. Finally, to further confirm the involvement of the p38 mitogen-activated protein kinase-dependent (MAPK) signaling pathway in the observed inhibition of NSC proliferation by mannitol, SB203580 was employed. All data were analyzed using SPSS 20.0 software (SPSS, Inc., Chicago, IL). The statistical analysis among multiple comparisons was performed using one-way analysis of variance (ANOVA), followed by Turkey's post hoc test in case of the data following a normal distribution using a Shapiro-Wilk normality test. Comparisons between 2 groups were determined using Student's t-test, if the data exhibited a normal distribution using a Shapiro-Wilk normality test. Meanwhile, data were shown as median and interquartile range and analyzed using the Mann-Whitney U test, if the data failed the normality test. A p < 0.05 was considered as significant difference. Results::Primary NSC were isolated from the mice, and the characteristics were identified using immunostaining analysis. Thereafter, the results indicated that mannitol held the capability of inhibiting NSC proliferation in a dose-dependent and time-dependent manner using cell counting kit-8, neurospheres formation, and immunostaining of Nestin and Ki67 assays. During the process of mannitol suppressing NSC proliferation, the expression of AQP4 mRNA and protein was downregulated, while the gene expression of p-p38 was elevated by reverse transcription polymerase chain reaction, immunostaining, and western blotting assays. Subsequently, the administration of SB203580, one of the p38 MAPK signaling pathway inhibitors, partially abrogated this inhibitory effect resulting from mannitol, supporting the fact that the p38 MAPK signaling pathway participated in curbing NSC proliferation induced by mannitol.Conclusions::Mannitol inhibits NSC proliferation through downregulating AQP4, while upregulating the expression of p-p38 MAPK.

BACKGROUND:At present,the use of a locking bone plate combined with steel wire or steel cable for the treatment of periprosthetic femoral fracture often adopts monocortical fixation,which is not stable and the proximal end of the bone cannot be achieved anatomically fitted by plate.The customized anatomical plate system can effectively solve this problem. OBJECTIVE:To explore the biomechanical strength of a customized anatomical plate system in fixation of Vancouver BI periprosthetic femoral fracture. METHODS:CT thin layer scanning data of normal femurs of 1 006 cases were selected and input into the MIMICS 21.0 software to establish the three-dimensional reconstruction model of the femur,which was set as the three-dimensional reconstruction group.56 complete human femoral specimens were selected as the femoral specimen group.The measured results of the two groups for femoral anatomical appearance were compared.If there was no significant difference between the two groups,the approximate appearance of a customized anatomical plate system was designed based on the measurement results in MIMICS 21.0 software and NX11.0 software.The customized anatomical plate system was designed and prepared according to the above measurement results.Eight pairs of frozen human femurs were selected to make Vancouver BI periprosthetic femoral fracture,which of the left were thin layer scanned by dual-source CT to obtain data.The data were transferred to determine the customized anatomical plate system model by the above design software.Eight sets of customized anatomical plate systems were ultimately produced,relying on the instrument company.The eight pairs of models were numbered 1-8.The left side was fixed with the customized anatomical plate system(customized anatomical plate system group);the right side was fixed with a metal locking plate system-large locking plate(claw plate group).L1-L4 and R1-R4 were subjected to vertical short-cycle loading test and vertical loading test.L5-L8 and R5-R8 were subjected to horizontal short-cycle loading test and four-point bending test.The vertical loading test and four-point bending test were used to collect bending load,bending displacement,and bending strain.Two short cycle loading tests were used to collect strain displacement to compare the maximum load,maximum displacement,bending stiffness,and short-period displacement resistance of the two kinds of bone plates. RESULTS AND CONCLUSION:(1)There were no significant differences in all indexes between the three-dimensional reconstruction group and the femoral specimen group(P>0.05).Individual customized anatomical plate system was designed based on the measurement results combined with digital software.(2)In the vertical loading test,the maximum load was higher(P=0.015),the maximum bending displacement was smaller(P=0.014),and the bending stiffness was higher(P=0.005)in the customized anatomical plate system group compared with the claw plate group.(3)In the four-point bending test,the maximum load was higher(P=0.023),the bending stiffness was higher(P=0.005),and the maximum bending displacement was not significant(P=0.216>0.05)in the customized anatomical plate system group compared with the claw plate group.(4)In the vertical short-cycle loading test,the average level of bending displacement in the customized anatomical plate system group(0.23±0.10 mm)was significantly lower than that in the claw plate group(0.44±0.02 mm)(P<0.05).(5)There was no significant difference in the average level of bending displacement between the two groups in the horizontal short cycle loading test(P>0.05).(6)It is concluded that the customized anatomical plate system has personalized anatomical characteristics,and the fixation of Vancouver BI periprosthetic femoral fracture is more stable,which has certain significance for clinical treatment.

BACKGROUND:Observational studies have suggested that statin drugs may have a protective effect on bone density,making them a potential treatment option for osteoporosis. OBJECTIVE:To evaluate the causal relationship between drug target-mediated lipid phenotypes and bone mineral density(BMD)using Mendelian randomization methods. METHODS:We obtained single nucleotide polymorphismsrelated to statin drugs and BMD data from the IEU Open GWAS database.The primary analysis method was the inverse variance weighted method,and we also used weighted median,simple median,weighted mode,and MR-Egger regression.We usedβ values and 95%confidence intervals(CI)to assess the causal relationship between statin drugs and BMD.Additionally,we conducted sensitivity analyses to validate the results,assessed heterogeneity using Cochran's Q test,examined for horizontal pleiotropy using the MR-Egger intercept test,and performed leave-one-out analyses to determine if individual or multiplesingle nucleotide polymorphism influenced the results. RESULTS AND CONCLUSION:There was a significant association between the statin target of action,3-hydroxy-3-methyl glutaryl coenzyme A reductase-mediated low-density lipoprotein cholesterol,and heel bone BMD(β=-0.086,95%CI:-0.117 to-0.055,P=5.42×10-8)and whole-body BMD(β=-0.193,95%CI:-0.288 to-0.098,P=7.35×10-5).The findings of this study support the protective effect of statin drugs on BMD.These findings not only deepen our understanding of the relationship between cholesterol-related genes and bone health but also reveal potential therapeutic targets for improving BMD.

Objective:To analyze the association between visceral fat area (VFA) and fatty liver based on quantitative CT (QCT) in people receiving health examination with normal body mass index (BMI).Methods:A cross-sectional study. A total of 1 305 physical examiners who underwent chest CT and QCT examination in the Department of Health Management of Henan Provincial People′s Hospital from January to December 2021 were retrospectively selected as subjects. The physical components at the central level of the lumbar two cone were measured with QCT, including subcutaneous fat area (SFA), VFA and liver fat content (LFC). And the metabolic indexes, such as blood lipids and blood glucose, were collected. The t-test and χ2 test were used to analyze the correlation between the detection rate of fatty live and LFCr and age and gender. According to level of VFA (<100 cm 2, 100-150 cm 2 and≥150 cm 2), the subjects were divided into three groups, and one-way ANOVA and χ2 test were used in comparison between groups. Multiple linear regression was used to analyze the correlation between VFA and metabolic indexes and LFC. Results:Of the 1 305 subjects, there were 634 males and 671 females. The detection rate of fatty liver in normal BMI population was 65.67%, and it was 72.71% and 59.02% respectively in men and women ( χ2=27.12, P<0.001), and the detection rate of fatty liver and LFC increased with age (both P<0.05). With the increase of VFA, the age, BMI, SFA, LFC, total cholesterol (TC), triacylglycerol (TG), low-density lipoprotein cholesterol (LDL-C), fasting blood glucose (FBG), alanine aminotransferase (ALT), blood uric acid and prevalence of fatty liver increased (all P<0.05), and the low-density lipoprotein cholesterol (HDL-C) decreased ( P<0.001). Multiple linear regression analysis showed that after adjustment for age factors, regardless of male or female, LFC was independently positively related with VFA, BMI, and ALT (male β=0.206, 0.145, 0.174, female β=0.194, 0.150, 0.184; all P<0.05). FBG was positively correlated with male independently ( β=0.134; P<0.001). The indicators related to female independently were TC, TG, and blood uric acid ( β=-0.121, 0.145, 0.141, all P<0.05) Conclusion:In the population receiving health examination with normal BMI, the VFA measured by QCT technique is closely related to fatty liver.

Objective To compare the clinical efficacies of video-assisted thoracoscopic segmentectomy versus lobectomy for early-stage non-small cell lung cancer.Methods The clinical data of 234 patients with stage ⅠA non-small cell lung cancer and undergoing different surgical methods under video-assisted thoracoscopy admitted to Chongqing Dianjiang General Hospital were retrospectively analyzed,and the patients were divided into the lung segment group and the lung lobe group according to their surgical methods.The clinical characteristics of the patients in the two groups were balanced by a 1-to-1 ratio matching through the propensity score matching method,and each group finally included 63 cases.The perioperative indicators containing operation time,intraoperative blood loss,postoperative thoracic drainage tube indwelling time,thoracic drainage volumes 24 hours and 48 hours after operation and postoperative hospital stay were compared of patients between the two groups.The incidence of postoperative complications such as air leakage>6 days,pulmonary infection,atelectasis,hemoptysis,and hoarseness in the two groups was collected.Results There was no significant difference in the operation time,intraoperative blood loss,thoracic drainage volumes 24 hours and 48 hours after operation,postoperative thoracic drainage tube indwelling time or incidence of postoperative complications of patients between the two groups(P>0.05).The postoperative hospital stay of patients in the lung segment group was shorter than that in the lung lobe group,with statistically significant difference(P=0.003).Conclusion For patients with stage ⅠA non-small cell lung cancer,video-assisted thoracoscopic segmentectomy has similar perioperative efficacy to lobectomy,while segmentectomy has a more significant advantage in shortening the hospital stay.