The objective of this study was to find out whether the unilateral distraction of mandible has an influence on temporomandibular joint and if it does, how significant the influence is. Four beagle dogs were used in this study. Each dog had two implants placed into the left mandible. The mandible was distracted for 14days with an distraction device as an amount of 0.75mm, twice per day after osteotomy between two implants. Each animals were sacrificed at the second, fourth, sixth and eighth week after the total distraction amount of 10.5mm were gotten. Upon embedding and staining, the specimens were evaluated with a light microscope. The results were as follows. 1. For the second week group, the articular cartilage and osteoid seam of temporal bone and condyle were relatively well maintained. There were not any significant differences between distraction side and non distraction side. 2. For the fourth week group, the periosteal reaction was activated and the articular cartilage and osteoid seam of temporal bone and condyle were severely thickened-especially at posterior portion of distraction side. This findings revealed that the unilateral distraction forces has more influence on distraction side than on non distraction side, and on posterior portion than on anterior portion. 3. For the sixth and eighth week group, the thickness of meniscus in distraction side gradually recovered to the initial level. The thickened articular cartilage and osteoid seam of temporal bone and condyle were decreased in distraction side and showed relatively stable in non distraction side. From this results, we suggest that several considerations are required such as using an occlusal splint, maintaining the stability of bone distraction device and evaluating bone distraction rate to minimize the damages of temporomandibular joint tissues in early stage of distraction side.
Animals ; Cartilage, Articular ; Dogs ; Mandible* ; Occlusal Splints ; Osteotomy ; Temporal Bone ; Temporomandibular Joint*

No abstract available.
Female ; Humans* ; In Situ Hybridization* ; Papillomavirus Infections* ; Polymerase Chain Reaction*

BACKGROUND: Dexmedetomidine extends the duration of nerve block when administered perineurally together with local anesthetics by central and/or peripheral action. In this study, we compared the duration of nerve block between dexmedetomidine and epinephrine as an adjuvant to 1% mepivacaine in infraclavicular brachial plexus block. METHODS: Thirty patients, scheduled for upper limb surgery were assigned randomly to 3 groups of 10 patients each. We performed brachial plexus block using a nerve stimulator. In the control group (group C), patients received 40 ml of 1% mepivacaine. In group E, patients received 40 ml of 1% mepivacaine containing 200 microg of epinephrine as an adjuvant. In group D, patients received 40 ml of 1% mepivacaine containing 1 microg/kg of dexmedetomidine as an adjuvant. Sensory block duration, motor block duration, time to sense pain, and onset time were assessed. We also monitored blood pressure, heart rate, oxygen saturation and bispectral index. RESULTS: In group D and group E, sensory block duration, motor block duration and time to sense first pain were prolonged significantly compared to group C. However, there was no significant difference between group D and group E. CONCLUSIONS: Perineural 1 microg/kg of dexmedetomidine similarly prolonged nerve block duration compared to 200 microg of epinephrine, but slowed heart rate. Thus, dexmedetomidine is expected to be a good alternative as an adjuvant to local anesthesia in patients who are cautioned against epinephrine.
Anesthesia, Local ; Anesthetics, Local ; Blood Pressure ; Brachial Plexus* ; Dexmedetomidine* ; Epinephrine* ; Heart Rate ; Humans ; Mepivacaine* ; Nerve Block ; Oxygen ; Upper Extremity

In this study, the rate of bone formation and the pattern of bone to implant contact surface around HA coated implant and pure Ti implant inserted into the irradiated tibia of rabbit were compared. Sixteen mongrel mature male rabbits were used as experimental animal. Each rabbit received 15 Gy of irradiation. Four weeks after irradiation, two holes were prepared on the tibia of each rabbit for placement of HA coated type and pure Ti type implants. Prior to implant placement, one group received steroid irrigation and the control group was similarly irrigated with normal saline. This was immediately followed by placement of the two different types of implants. Postoperatively, tetracycline was injected intramuscularly for 3 days. For fluorescent labelling, 3 days of intramuscular alizarine red injection was given. 2 weeks before sacrifice, followed by intramuscular calcein green on the last 3 days before specimen collection. Each rabbit was sacrificed on the second, fourth, sixth and eighth week after the implantation. The specimens were observed by the light microscope and the fluorescent microscope. The results were as follows; 1. All implants inserted into the irradiated tibia of rabbit were free from clinical mobility and no signs of bony resorption were noted around the site of implant placement. 2. Under the light microscope, new bone formation proceeded faster around implants that received steroid irrigation compared to the control group irrigated with saline. Bone to implant contact surface was greater in the steroid irrigated group than the saline irrigated group. Therefore, better initial stabilization was observed in the group pretreated with steroid irrigation. 3. Under the light microscope. HA coated implants showed broader bone to implant contact surface than pure Ti implants, and HA coated implants had better bone healing pattern than pure Ti implants. 4. In the steroid pretreated group, acceleration of bone formation was demonstrated by fluorescent microscopy around the 2, 4 weeks group and the 6 weeks HA coated implant group. The difference in the rate of bone formation proved to be statistically significant (P<0.05). Faster bone formation was noted in the saline irrigated group in the 6 weeks pure Ti implants and 8 weeks group. The difference was not statistically significant(P<0.05). 5. For the rabbits that were sacrificed on the second and fourth week after the implant placements, the rates of bone formation around HA coated implants proceeded faster than those around pure Ti implants under the fluorescent microscopy. For the rabbits that were sacrificed on the sixth week after the implant placements, the rates of bone formation around pure Ti implants proceeded faster than those around HA coated implants under the fluorescent microscopy. But this result did not show statistical significance (P<0.05) For the rabbits that were sacrificed on the eighth week after the implant placements, the rates of bone formation around HA coated implants proceeded faster than those around pure Ti implants under the fluorescent microscopy. This result was statistically significant (P<0.05).
Acceleration ; Animals ; Humans ; Male ; Microscopy ; Osteogenesis* ; Rabbits ; Specimen Handling ; Tetracycline ; Tibia*

BACKGROUND: Various techniques are used for performing breast reduction. Wise-pattern and vertical scar techniques are the most commonly employed approaches. However, a vertical scar in the mid-lower breast is prominent and aesthetically less pleasant. In contrast, a semicircular horizontal approach does not leave a vertical scar in the mid breast and transverse scars can be hidden in the inframammary fold. In this paper, we describe the experiences and results of semicircular horizontal breast reductions performed by a single surgeon. METHODS: Between September 1996 and October 2013, our senior author used this technique in 38 cases in the US and at our institution. We used a superiorly based semicircular incision, where the upper skin paddle was pulled down to the inframammary fold with the nipple-areola complex pulled through the keyhole. RESULTS: The average total reduction per breast was 584 g, ranging from 286 to 794 g. The inferior longitudinal pedicle was used in all the cases. The average reduction of the distance from the sternal notch to the nipple was 13 cm (range, 11-15 cm). The mean decrease in the bra cup size was 1.7 cup sizes (range, a decrease of 1 to 3). We obtained very satisfactory results with a less noticeable scar, no complication such as necrosis of the nipple or the skin flap, wound infection, aseptic necrosis of the breast tissue, or wound dehiscence. One patient had a small hematoma that resolved spontaneously. CONCLUSIONS: This technique is straightforward and easy to learn, and offers a safe, effective, and predictable way for treating mammary hypertrophy.
Breast* ; Cicatrix ; Female ; Hematoma ; Humans ; Hypertrophy ; Mammaplasty ; Necrosis ; Nipples ; Skin ; Wound Infection ; Wounds and Injuries

The pneumomediastinum after a dental treatment occurs rarely and shows almost good prognosis, however it is potentially life-threatening complication. Here we report a case of pneumomediastinum, occurred by air bubbles originated from dental high speed equipment, via head and neck fascial space with literatures review.
Dental High-Speed Equipment ; Head ; Mediastinal Diseases ; Mediastinal Emphysema ; Neck ; Prognosis ; Subcutaneous Emphysema

Systemic lupus erythematosus is a disease of unknown cause which involves various organs and primary involvement of urinary bladder is very rare. We experienced a case of a female patient with SLE and urologic manifestations (interstitial cystitis, hydroureters and hydronephrosis), which were resolved spontaneously without any immunosuppressive therapy. There was no significant correlation between clinical course and disease activity index.
Cystitis* ; Female ; Humans ; Lupus Erythematosus, Systemic ; Remission, Spontaneous ; Urinary Bladder

BACKGROUND: Lidocaine has been used widely to prevent propofol injection pain. Various methods of administration exist, such as lidocaine premixed with propofol or lidocaine pretreatment using a tourniquet, but it is unclear which method of lidocaine administration is more effective for the prevention of injection pain of propofol LCT/MCT. The purpose of this study was to compare pretreatment of lidocaine with a tourniquet and a premixed injection of lidocaine to prevent injection pain of propofol-LCT/MCT. METHODS: Patients were randomly allocated into the pretreatment group (n = 117) or the premixed group (n = 117). The pretreatment group was pretreated with 2 ml of lidocaine 2%, held with a tourniquet, before propofol-LCT/MCT injection. The premixed group was injected with a premixed solution of propofol-LCT/MCT and 2 ml of lidocaine 2%. To evaluate the incidence and severity of pain, spontaneous verbal expressions of pain, movement of hand, frowning, and moaning were recorded, and the patients were asked to recall their pain with the visual analogue score (VAS) 30 minutes after awakening from anesthesia. RESULTS: Overall, injection pain occurred in 13.7% of the pretreatment group and 15.4% of the premixed group, without any statistical difference (P = 0.71). There was no difference in spontaneous verbal expressions of pain, movement of hand, frowning, and moaning between the two groups. The pain intensity (VAS) also showed no difference between the two groups (P = 0.49). CONCLUSIONS: Pretreatment of lidocaine with a tourniquet showed no more benefit to prevent injection pain of propofol LCT/MCT compared to a premixed injection with lidocaine.
Anesthesia ; Emulsions ; Hand ; Humans ; Incidence ; Lidocaine* ; Methods ; Propofol ; Tourniquets*

There are three designs of thread form in screw type implants: V-thread, Reverse buttress thread and Square thread. The purpose of this study was to find out how thread form designs have an influence on the equivalent stress, equivalent strain, maximum shear stress and maximum shear strain and which design of thread form generates more maximum equivalent stress and strain. 3-D finite element analysis was used to evaluate the stress and strain patterns of three tread types. The results of this study were as follow. 1. Under the 200N of axial load, the value of maximum equivalent stress is smallest in square thread and there is no significant difference between that of V thread and reverse buttress thread. 2. Under the 200N of axial load, the value of maximum equivalent strain is largest in V thread and smallest in square thread. 3. Under the 200N of axial load, the value of maximum shear stress is smallest in square thread and there is no significant difference between that of V thread and reverse buttress thread. 4. Under the 200N of axial load, the value of maximum equivalent strain is largest in V thread and there is no significant difference between that of square thread and reverse buttress thread. 5. Above results show that the square thread has special advantages in stress and strain compared with other thread types, especially in shear stess which is most determinant to implant-bone interface. Considering the superior biomechanical properties of square form implant, we presume that square form implant has better clinical results than the other types of implants in the same clinical conditions.
Finite Element Analysis*

Although extended-spectrum beta-lactamase-producing Escherichia coli (ESBL-EC) has emerged as a significant community-acquired pathogen, there is little epidemiological information regarding community-onset bacteremia due to ESBL-EC. A retrospective observational study from 2006 through 2011 was performed to evaluate the epidemiology of community-onset bacteremia caused by ESBL-EC. In a six-year period, the proportion of ESBL-EC responsible for causing community-onset bacteremia had increased significantly, from 3.6% in 2006 to 14.3%, in 2011. Of the 97 clinically evaluable cases with ESBL-EC bacteremia, 32 (33.0%) were further classified as healthcare-associated infections. The most common site of infection was urinary tract infection (n=35, 36.1%), followed by biliary tract infections (n=29, 29.9%). Of the 103 ESBL-EC isolates, 43 (41.7%) produced CTX-M-14 and 36 (35.0%) produced CTX-M-15. In the multilocus sequence typing (MLST) analysis of 76 isolates with CTX-M-14 or -15 type ESBLs, the most prevalent sequence type (ST) was ST131 (n=15, 19.7%), followed by ST405 (n=12, 15.8%) and ST648 (n=8, 10.5%). No significant differences in clinical features were found in the ST131 group versus the other group. These findings suggest that epidemic ESBL-EC clones such as CTX-M-14 or -15 type ESBLs and ST131 have disseminated in community-onset infections, even in bloodstream infections, which are the most serious type of infection.
Aging ; Bacteremia/drug therapy/*epidemiology ; Biliary Tract Diseases/epidemiology/microbiology ; Cephalosporin Resistance/genetics ; Cephalosporins/therapeutic use ; Community-Acquired Infections/*epidemiology/microbiology ; Escherichia coli/isolation & purification/metabolism ; Escherichia coli Infections/drug therapy/*epidemiology ; Female ; Humans ; Male ; Microbial Sensitivity Tests ; Molecular Epidemiology ; Multilocus Sequence Typing ; Prevalence ; Retrospective Studies ; Urinary Tract Infections/epidemiology/microbiology ; beta-Lactamases/*metabolism