No abstract available.

No abstract available.
Flail Chest*

The Fracture of the os calcis is quite common in relation to fracture in other tarsal bone, and fractures involving the subtalar joint may cause serious and persistant disabilities. The treatment of these calcaneal fractures remains controversial So there is no universal agreement in the treatment of these fractures, especially involving the subtalar joint. Twenty displaced intraarticular fractures of calcaneus in 15 patients were treated by open reduction and internal fixation with a plate and screws and bone graft through a lateral approach to elevate the depressed lateral portion of the posterior facet at the Inchon Chritian Hospital from Jan., 1990 to Dec, 1991. Twenty feet in 15 patients of calcaneal fractures involving the subtalal joint were treated and were clinically analysed and following result were obtained. 1. The 20 cases were classified according to the Sanders classification, 9 in type II, 9 in type III and 2 in type IV. 2. The 20 cases were treated by open reduction andinteranl fixation with plate and screws and iliac bone graft through an Sanders lateral approach. The bone graft is packed under the elevated posterior to prevent late collapse of the central fragment and to supply structral stability. 3. The preoperative average Böhler's angle was 0.4°. The post operative average Böhler's angle was 23.4° which was increased significantly. 4. Based on assessment of result of Salama, excellenwas 6, good was 7, fair was 4 and poor was 3. 5. The most common complication after treatment was persistant pain, especially beneath the lateral malleolus.
Calcaneus ; Classification ; Foot ; Humans ; Incheon ; Intra-Articular Fractures ; Joints ; Subtalar Joint ; Tarsal Bones ; Transplants

The aim of this study was to assess the involvement of multipotential progenitor cells in the pathogenesis of Mooren's ulcer using immunohistochemical staining techniques. Tissue specimens were collected from 3 Mooren's ulcer patients who underwent lamellar keratectomy. Immunohistochemical staining patterns were analyzed using antibodies: CD34, c-kit, STRO-1, CD45RO, VEGF and alpha-SMA. Strong positive CD34, c-kit and STRO-1 cells were revealed in Mooren's ulcer specimens, especially in the superficial stroma. A few weakly expressed CD34 stroma cells were seen in normal limbal cornea but no immunoreactivity for c-kit and STRO-1 could be found. CD45RO positive T cells were found to have infiltrated in Mooren's ulcer. The immunostaining pattern of VEGF and yen a- SMA was closely correlated with the degree of expression and the number of CD34 positive cells. Bone marrow-derived multipotential progenitor cells may be involved in the pathogenesis of Mooren's ulcer by synergizing with other factors to amplify autoimmune destructive reactions and to contribute to the regeneration process. Specific therapeutic strategies that target the role of these cells in the disease are warranted.
Cornea/*pathology ; Corneal Ulcer/*pathology ; Hematopoietic Stem Cells/*pathology ; Humans ; Multipotent Stem Cells/*pathology ; Research Support, Non-U.S. Gov't

Purpose: The opacity of zirconia sometimes requires a veneering material; thus lithium disilicate, a veneer material with excellent strength, can be used. This study investigated the fracture resistance of zirconia–lithium disilicate (Zr-LS2) bi-layered crowns according to the design of the substructure. Materials and Methods: Five groups of posterior Zr-LS2 restorations (Zirtooth and Amber LiSi-POZ) were fabricated with different zirconia substructure coverage (control group, groups half occlusal zirconia coverage; 1/2OZ, and three-quarter occlusal zirconia coverage; 3/4OZ) and margin designs (control group, groups collar margin; C-M, and collarless margin; Cl-M). All restorations were cemented with self-adhesive resin cement followed by 24-h water storage and thermocycling (10,000 cycles, 5°C and 55°C). The fracture load was measured, and failure mode analysis, fractography, and elemental analysis were performed. The one-way analysis of variance and Fisher’s exact test were performed for statistical analyses (α=.05). Results: A significant difference was found in the fracture load of Zr-LS2 restorations according to the zirconia coverage of the occlusal area and margin design (P<.05). Group 3/4OZ was significantly larger than the control group C and 1/2OZ (P<.05). The C-M group had greater fracture loads based on margin design than the control group C and Cl-M (P<.05). Conclusion The fracture resistance of posterior Zr-LS2 restorations increased with the zirconia coverage, occlusal thickness, and collar margin.

Purpose: The opacity of zirconia sometimes requires a veneering material; thus lithium disilicate, a veneer material with excellent strength, can be used. This study investigated the fracture resistance of zirconia–lithium disilicate (Zr-LS2) bi-layered crowns according to the design of the substructure. Materials and Methods: Five groups of posterior Zr-LS2 restorations (Zirtooth and Amber LiSi-POZ) were fabricated with different zirconia substructure coverage (control group, groups half occlusal zirconia coverage; 1/2OZ, and three-quarter occlusal zirconia coverage; 3/4OZ) and margin designs (control group, groups collar margin; C-M, and collarless margin; Cl-M). All restorations were cemented with self-adhesive resin cement followed by 24-h water storage and thermocycling (10,000 cycles, 5°C and 55°C). The fracture load was measured, and failure mode analysis, fractography, and elemental analysis were performed. The one-way analysis of variance and Fisher’s exact test were performed for statistical analyses (α=.05). Results: A significant difference was found in the fracture load of Zr-LS2 restorations according to the zirconia coverage of the occlusal area and margin design (P<.05). Group 3/4OZ was significantly larger than the control group C and 1/2OZ (P<.05). The C-M group had greater fracture loads based on margin design than the control group C and Cl-M (P<.05). Conclusion The fracture resistance of posterior Zr-LS2 restorations increased with the zirconia coverage, occlusal thickness, and collar margin.

Purpose: The opacity of zirconia sometimes requires a veneering material; thus lithium disilicate, a veneer material with excellent strength, can be used. This study investigated the fracture resistance of zirconia–lithium disilicate (Zr-LS2) bi-layered crowns according to the design of the substructure. Materials and Methods: Five groups of posterior Zr-LS2 restorations (Zirtooth and Amber LiSi-POZ) were fabricated with different zirconia substructure coverage (control group, groups half occlusal zirconia coverage; 1/2OZ, and three-quarter occlusal zirconia coverage; 3/4OZ) and margin designs (control group, groups collar margin; C-M, and collarless margin; Cl-M). All restorations were cemented with self-adhesive resin cement followed by 24-h water storage and thermocycling (10,000 cycles, 5°C and 55°C). The fracture load was measured, and failure mode analysis, fractography, and elemental analysis were performed. The one-way analysis of variance and Fisher’s exact test were performed for statistical analyses (α=.05). Results: A significant difference was found in the fracture load of Zr-LS2 restorations according to the zirconia coverage of the occlusal area and margin design (P<.05). Group 3/4OZ was significantly larger than the control group C and 1/2OZ (P<.05). The C-M group had greater fracture loads based on margin design than the control group C and Cl-M (P<.05). Conclusion The fracture resistance of posterior Zr-LS2 restorations increased with the zirconia coverage, occlusal thickness, and collar margin.

Purpose: The opacity of zirconia sometimes requires a veneering material; thus lithium disilicate, a veneer material with excellent strength, can be used. This study investigated the fracture resistance of zirconia–lithium disilicate (Zr-LS2) bi-layered crowns according to the design of the substructure. Materials and Methods: Five groups of posterior Zr-LS2 restorations (Zirtooth and Amber LiSi-POZ) were fabricated with different zirconia substructure coverage (control group, groups half occlusal zirconia coverage; 1/2OZ, and three-quarter occlusal zirconia coverage; 3/4OZ) and margin designs (control group, groups collar margin; C-M, and collarless margin; Cl-M). All restorations were cemented with self-adhesive resin cement followed by 24-h water storage and thermocycling (10,000 cycles, 5°C and 55°C). The fracture load was measured, and failure mode analysis, fractography, and elemental analysis were performed. The one-way analysis of variance and Fisher’s exact test were performed for statistical analyses (α=.05). Results: A significant difference was found in the fracture load of Zr-LS2 restorations according to the zirconia coverage of the occlusal area and margin design (P<.05). Group 3/4OZ was significantly larger than the control group C and 1/2OZ (P<.05). The C-M group had greater fracture loads based on margin design than the control group C and Cl-M (P<.05). Conclusion The fracture resistance of posterior Zr-LS2 restorations increased with the zirconia coverage, occlusal thickness, and collar margin.

In the case of an extraction in the maxillary anterior region, immediate placement of implant-supported fixed prosthesis can be considered as a treatment option. Fewer surgical operations, reduced treatment time, and optimal availability of existing bone are obvious advantages of the method; however, when applied in the continuous maxillary anterior region, inter-implant distance must be carefully considered, as well as accurate diagnosis and treatment planning for predictable outcome. In this case report, immediate placement of two implants in the continuous maxillary anterior along with bone graft following the extraction of root rests, and the restoration of provisional and implant-supported fixed prosthesis on a 63-year-old patient had resulted in both esthetically and functionally satisfactory clinical outcomes.
Diagnosis ; Humans ; Methods ; Middle Aged ; Prostheses and Implants ; Transplants

OBJECTIVE: In June 28, 2012, a 'Hospitalization guideline for car accident patients' was announced to mediate the clash of opinions about the hospitalization of minor head trauma patients among doctors, patients and insurance companies. The guideline was issued to describe the patients' symptoms and emotions in detail after the injury. In this paper, evaluation for the guideline and suggestions for modifications was done. METHODS: Thirty-two doctors, 96 patients and 60 employees were each given surveys about the hospitalization guidelines, related personnels' attitude and evaluation of patients' emotional problems. The frequency, ratio and chi-square test were performed. RESULTS: Sixty-eight point eight percent of doctors, 79.8% patients and 91.6% insurance company employees agreed to the need for a guideline. Among the 68.8% doctors that supported the need for a guideline, 18.8% knew that the guideline actually existed. Sixty-nine point two percent of doctors said that they would apply the guideline once they were introduced to it. Among the announced guideline provisions, 'Glasgow coma score less than 15' and 'socially not suitable for discharge' required reevaluation since 40.6% all surveyors consented that these two criteria were not suitable. The consensus supporting the need for emotional evaluation came out to be 78.1%, 58.5%, 50.9% in doctors, patients and insurance employees respectively. CONCLUSION: Although a guideline for hospitalization of minor head injury patients is necessary, some part of it seems to be reevaluated and improved, especially for clauses related to the patient's emotional problems. These changes and revisions to the guideline require further speculation and research.
Coma ; Consensus ; Craniocerebral Trauma* ; Hospitalization* ; Humans ; Insurance ; Patient Admission