Objective To investigate the changes in metabolic indexes and anesthesia administration during perioperation in patients undergoing orthotopic liver transplantation. Methods Eleven patients who underwent orthotopic liver transplantation were selected. Their pH, BE, HCO 3 -, K +, Ca 2+, blood glucose, PT, APTT and FIB were assessed at 60 min of pretransplantation, 20 min and 40 min of liver transplantation, 20 min and 40 min of new liver reperfusion. Results The pH, BE, HCO 3 -, K +, Ca 2+ during 20 min and 40 min of liver transplantation decreased more significantly than those during pretransplantation 60 min, PT and APTT extended markedly, the level of blood glucose did not change markedly; pH, BE, HCO 3-, K +, Ca 2+ and the level of blood glucose during new liver reperfusion 20 min and 40 min increased significantly compared to those during liver transplantation 20 min and 40 min; PT, APTT and FIB did not change markedly. Conclusion Metabolic indexes during liver transplantation change more markedly than those during pretransplantation or new liver reperfusion.

Sarcopenia is a progressive syndrome associated with aging, generalized loss of skeletal muscle mass, muscle strength and function.It is closely related to the occurrence of adverse events such as ambulatorydysfunction, falls and fractures in the elderly, and seriously affects the quality of life of the elderly.The etiology of sarcopenia has not been fully elucidated.Various pathophysiological mechanisms such as reduced exercise, genetic factors, age-related hormone changes, malnutrition and insufficient protein intake, decreased neuromuscular function, pro-inflammatory cytokines, and myocyte apoptosis are possible factors.Recent studies have found that intestinal microecological changes may be implicated in the occurrence and development of sarcopenia.In this article, we reviewed intestinal microecological changes and their possible role in the mechanisms underlying sarcopenia.

Objective To investigate the effects of remimazolam and propofol on postoperative nausea and vomiting(PONV)in patients undergoing painless prostate biopsy,so as to optimize the anesthesia protocols.Methods A retrospective analysis was conducted on the clinical data of 1217 patients who underwent painless prostate biopsy in our hospital during Jan.2023 and Jun.2024.Among them,1093 patients met the inclusion criteria and were divided into two groups:the remimazolam group(n=294)and the propofol group(n=799).After 1∶1 propensity score matching,with 267 patients in either group,a comparison was conducted regarding the incidence of PONV and anesthesia recovery time.Results Before propensity score matching,the remimazolam group had older age[66(53,83)years vs.63(49,78)years],higher body mass index(BMI)[25.30(21.83,29.23)vs.24.46(20.79,28.91)],larger intraoperative use of sufentanil[9(8,10)μg vs.7(6,9)μg],higher intraoperative use rate of ondansetron(55.4％vs.47.6％),and longer surgical duration[16(14,20)min vs.15(13,17)min],with statistically significant differences(P＜0.05).There were no statistically significant differences in the aforementioned factors between the two groups after propensity score matching(P＞0.05).Before propensity score matching,the incidence of PONV was higher in the remimazolam group than in the propofol group(17.7％vs.11.5％,P=0.007),while after propensity score matching,the incidence of PONV did not differ significantly between the two groups(12.7％vs.17.2％,P=0.146).Before and after propensity score matching,the anesthesia recovery time was significantly shorter in the remimazolam group than in the propofol group[3(2,4)min vs.7(4,10)min,P＜0.001].Conclusion Compared with propofol,remimazolam does not increase the incidence of PONV in patients undergoing painless prostate biopsy but can shorten anesthesia recovery time.

Objective:To explore the effect of three-dimensional(3D) design and printing in the reoperation of asymmetric deformity after orthognathic surgery.Methods:Patients of facial asymmetry after orthognathic surgery were included in the Department of Stomatology, Shenzhen University General Hospital and Department of Oral & Maxillofacial Surgery, Shenzhen Stomatology Hospital Affiliated to Shenzhen University from January 2016 to August 2020. Surgical plans and guide plates (positioning guide plate, bone cutting guide plate, reset guide plate) were made by 3D design and printing. During the operations, guide plates were used to guide osteotomy. The facial shape satisfaction of clinicians/patients/third-party were recorded and analyzed at preoperation and 6-12 months postoperation. These patients’ CT scan data was imported to the digital surgery software. Then the distance of chin-midpoint to mid-sagittal plane and the difference of bilateral protuberant point of mandible body to mid-sagittal plane were measured at preoperation and 6-12 months postoperation to determine whether the asymmetry were corrected and postoperative distance were the same as the preoperative design. Data analysis was conducted using SPSS 17.0 statistical software, and measurement data were expressed as Mean±SD. The preoperative and postoperative satisfaction of patients/clinicians/third-party, digital data of preoperation/postoperation and digital data of design-operations/postoperation were analyzed by paired t-test. Analysis of variance and dunnett- t test were used to compare the satisfaction of the surgeon, the third party and patients before and after operation. Results:There were 16 cases of facial asymmetry after orthognathic surgery, including 3 males and 13 females, aged from 18 to 35 years. In 9 cases, genioplasty were used to correct chin deviation. In the other 4 cases, unilateral buccal cortical bone resection were used to correct mandibular body deviation. In the last 3 cases, genioplasty and unilateral buccal cortical bone resection were both applied. All 16 patients successfully received the operation according to the preoperative digital designed plate. Postoperative follow-up ranged 6 months to 1 year. In the 12 cases of genioplasty, the distance of chin-midpoint to mid-sagittal plane reduced from(4.99±0.83) mm preoperatively to (1.63±0.80) mm postoperatively and the difference significant ( t=9.09, P<0.001). There was no significant difference between the distance of preoperative design [(1.50±0.43) mm] and the postoperative one ( t=-0.83, P=0.423). In the 7 cases of unilateral buccal cortical bone resection, the difference of bilateral protuberant point of mandible body to mid-sagitta plane reduced from (7.26±1.20) mm preoperatively to (2.44±0.56) mm postoperatively and the difference was statistically significant ( t=10.26, P<0.001). There was no significant difference was observed between the distance of preoperative design [(2.39±0.16) mm] and the postoperative one ( t=-0.29, P=0.779). The preoperative satisfaction of patients, clinicians and third-party were 65.94±8.21, 79.69±5.91, 79.38±7.50. The postoperative satisfaction of patients, clinicians and third-party were 90.00±5.48, 90.63±2.50, 90.00±4.08. The postoperative satisfaction of patients, chief surgeon and third party was higher than that preoperative satisfaction and the difference was statistically significant( t=-9.15, P<0.001; t=-7.50, P<0.001; t=-6.04, P<0.001). The difference of preoperation satisfaction was statistically significant( F=18.66, P<0.001). The difference of satisfaction of the clinicians and the patients was statistically significant ( P<0.001). The difference of satisfaction of the third-party and the patients was statistically significant ( P<0.001). The difference of postoperation satisfaction was not statistically significant( F=0.12, P=0.889). Conclusions:3D design and printing can 3D analyze comprehensively, simulate surgery accurately, visualize proposed result and guide 3D printing digital guiding plate to perform surgery accurately. In addition, it can improve postoperative satisfaction. So 3D design and printing had obvious advantages in the secondary surgery of asymmetric deformity correction after orthognathic surgery.

Objective:To explore the effect of three-dimensional(3D) design and printing in the reoperation of asymmetric deformity after orthognathic surgery.Methods:Patients of facial asymmetry after orthognathic surgery were included in the Department of Stomatology, Shenzhen University General Hospital and Department of Oral & Maxillofacial Surgery, Shenzhen Stomatology Hospital Affiliated to Shenzhen University from January 2016 to August 2020. Surgical plans and guide plates (positioning guide plate, bone cutting guide plate, reset guide plate) were made by 3D design and printing. During the operations, guide plates were used to guide osteotomy. The facial shape satisfaction of clinicians/patients/third-party were recorded and analyzed at preoperation and 6-12 months postoperation. These patients’ CT scan data was imported to the digital surgery software. Then the distance of chin-midpoint to mid-sagittal plane and the difference of bilateral protuberant point of mandible body to mid-sagittal plane were measured at preoperation and 6-12 months postoperation to determine whether the asymmetry were corrected and postoperative distance were the same as the preoperative design. Data analysis was conducted using SPSS 17.0 statistical software, and measurement data were expressed as Mean±SD. The preoperative and postoperative satisfaction of patients/clinicians/third-party, digital data of preoperation/postoperation and digital data of design-operations/postoperation were analyzed by paired t-test. Analysis of variance and dunnett- t test were used to compare the satisfaction of the surgeon, the third party and patients before and after operation. Results:There were 16 cases of facial asymmetry after orthognathic surgery, including 3 males and 13 females, aged from 18 to 35 years. In 9 cases, genioplasty were used to correct chin deviation. In the other 4 cases, unilateral buccal cortical bone resection were used to correct mandibular body deviation. In the last 3 cases, genioplasty and unilateral buccal cortical bone resection were both applied. All 16 patients successfully received the operation according to the preoperative digital designed plate. Postoperative follow-up ranged 6 months to 1 year. In the 12 cases of genioplasty, the distance of chin-midpoint to mid-sagittal plane reduced from(4.99±0.83) mm preoperatively to (1.63±0.80) mm postoperatively and the difference significant ( t=9.09, P<0.001). There was no significant difference between the distance of preoperative design [(1.50±0.43) mm] and the postoperative one ( t=-0.83, P=0.423). In the 7 cases of unilateral buccal cortical bone resection, the difference of bilateral protuberant point of mandible body to mid-sagitta plane reduced from (7.26±1.20) mm preoperatively to (2.44±0.56) mm postoperatively and the difference was statistically significant ( t=10.26, P<0.001). There was no significant difference was observed between the distance of preoperative design [(2.39±0.16) mm] and the postoperative one ( t=-0.29, P=0.779). The preoperative satisfaction of patients, clinicians and third-party were 65.94±8.21, 79.69±5.91, 79.38±7.50. The postoperative satisfaction of patients, clinicians and third-party were 90.00±5.48, 90.63±2.50, 90.00±4.08. The postoperative satisfaction of patients, chief surgeon and third party was higher than that preoperative satisfaction and the difference was statistically significant( t=-9.15, P<0.001; t=-7.50, P<0.001; t=-6.04, P<0.001). The difference of preoperation satisfaction was statistically significant( F=18.66, P<0.001). The difference of satisfaction of the clinicians and the patients was statistically significant ( P<0.001). The difference of satisfaction of the third-party and the patients was statistically significant ( P<0.001). The difference of postoperation satisfaction was not statistically significant( F=0.12, P=0.889). Conclusions:3D design and printing can 3D analyze comprehensively, simulate surgery accurately, visualize proposed result and guide 3D printing digital guiding plate to perform surgery accurately. In addition, it can improve postoperative satisfaction. So 3D design and printing had obvious advantages in the secondary surgery of asymmetric deformity correction after orthognathic surgery.

Objective:To investigate the efficacy and safety of individualized rituximab rescue therapy for active lupus nephritis with acute kidney injury (AKI).Methods:The clinical data of lupus nephritis patients with AKI treated with rituximab at the Kidney Disease Center of the First Affiliated Hospital of Zhejiang University School of Medicine from April 2017 to June 2020 were collected, and the renal remission rate and adverse events after rituximab treatment were analyzed retrospectively. The Kaplan-Meier method was used to calculate the cumulative incidence of patients' remission.Results:There were 13 patients enrolled, including 8 females, and aged (35.23±15.92) years old. The urinary protein/creatinine ratio was (5.22±1.57) g/g before rituximab treatment. Four patients were on dialysis at admission, and 9 patients without dialysis had serum creatinine of (223.22±85.73) μmol/L. Eight patients were confirmed as proliferative lupus nephritis by renal biopsies, including 7 cases with crescent formation and 1 case with thrombotic microangiopathy (TMA), and the other 5 cases without renal biopsies were clinically diagnosed as TMA. The dose of rituximab was (815±516) mg (200-2 100 mg), and all the patients reached the state of peripheral blood B cells clearance (CD19 + B cell count was<5/μl). After the first treatment of rituximab, the median time to B-cell clearance was 21(15, 35) days, and 8 patients reached B-cell depletion (CD19 + B cell count was 0). The remission rate was 12/13 (two cases reached complete remission, and 10 cases reached partial remission). Three cases stopped dialysis, and 1 case (with glomerulosclerosis of 52.94%) entered maintaining dialysis. The relapse times in the maintenance remission period of 7 patients with refractory lupus nephritis declined significantly from (1.57±0.53) times in a median history of 60(20, 109) months to (0.43±0.79) times in a median history of 18(10, 23) months after the use of rituximab ( P=0.015). After using rituximab, the incidence of infection was 7/13. The median time from the use of rituximab to infection was 26(4, 44) days. Pulmonary infection (5/13) was the most common type and all infected patients recovered after anti-infection treatment. Conclusions:Rituximab can be used in the treatment of active lupus nephritis with AKI, especially in patients with crescent formation and TMA, but the infection should be paid close attention to and prevented.

Objective: To summarize the clinical manifestation and treatment of temporomandibular joint (TMJ) disc ossification, providing reference for clinical diagnosis and treatment of TMJ disc ossification. Methods: From January 2006 to January 2018, 4 patients with TMJ disc ossification (2 males and 2 females, aged 20-55 years with an average age of 35.5 years) which were admitted to the Department of Oral and Maxillofacial Surgery, Shenzhen Second People′s Hospital were analyzed retrospectively. Ossification of TMJ disc was found in 4 cases during TMJ surgery. Two cases underwent partial ossification resection plus disc reduction and anchorage, and two cases underwent discectomy plus temporalis myofascial flap replacement. The causes, clinical manifestations and surgical effects of TMJ disc ossification were analyzed by comparing the maximal interincisal opening, visual analogue scale (VAS) score and MRI imaging indexes before and after operation. Results: The history of anterior disc displacement of TMJ in 4 patients was long (average 11.5 years). In clinic, TMJ disc ossification was characterized by TMJ pain and limitation of mouth opening. The maximal interincisal opening was (32.1±6.1) mm and the VAS score was (7.3±0.4) before operation. MRI showed that the displaced discs of the affected sides were displaced and the condyle bones were worn. During the operation, ossification of TMJ discs was found yellow and hard, and the original elasticity was lost. Pathologic findings showed that the TMJ disc cartilage were ossified to osteoid tissue. Under the microscope, bone cells scattered around the bone cells and red trabecular bone were seen, and there were bone trabecula formed. In a follow-up of one year, TMJ pain was significantly decreased [VAS: (1.7±0.2)], and the maximal interincisal opening was (38.5±2.2) mm. MRI showed that the TMJ disc returned to normal position, and the sign of repairing and reconstruction of condyle bone could be found. Conclusions Long term displacement of TMJ disc may cause ossification with pain and limitation of interincisal opening. According to the degree and extent of ossification, partial ossification plus disc reduction and anchorage or discectomy plus temporalis myofascial flap replacement is feasible, and the clinical effects are satisfactory.

Objective:To evaluate the efficacy and safety of rituximab in the treatment of adult primary focal segmental glomerulosclerosis (FSGS).Methods:Adult FSGS patients treated with rituximab in the First Affiliated Hospital of Zhejiang University College of Medicine were retrospectively enrolled. One or two doses of rituximab (375 mg/m 2) were used aiming to achieve B cell depletion (defined as<5 B cells per microliter in peripheral blood) and the interval between the two doses was 2 weeks. The evaluated major outcomes were remission and relapse of nephropathy, and the secondary outcome measures were adverse events and renal outcomes. Results:A total of 14 patients (9 males) were enrolled, among whom 7 cases were steroid-dependent nephrotic syndrome (SDNS) or frequently relapsing nephrotic syndrome (FRNS), 6 cases were steroid-resistant nephrotic syndrome (SRNS) and one patient was new onset FSGS with contraindication to steroid. After treatment with rituximab, 7 patients with SDNS/FRNS achieved complete remission. At 6 months, the daily oral steroid dose reduced significantly compared with the baseline [(33.3±5.2) mg/d vs (6.7±6.6) mg/d, P<0.01]; while one patient still received tacrolimus 1.0 mg/d, the other 6 patients stopped using immunosuppressants; and the total number of relapse/total follow-up months decreased from 0.257 times/month to 0.058 times/month after the use of rituximab. For the other 6 SRNS patients and one patient with contraindication to steroid, three SRNS patients achieved partial remission and one patient with contraindication to steroid achieved complete remission at 34.50(20.25, 95.25) days after use of rituximab, and the other 3 SRNS patients failed to achieve remission, of whom one patient developed end stage renal disease at 23 months. Conclusions:Rituximab may reduce the risk of relapse and help steroid or immunosuppressant-tapering in adult steroid-dependent/frequently relapsing idiopathic FSGS. However, it is not effective in SRNS patients.

Temporomandibular joint (TMJ) diseases are common clinical conditions. The number of patients with TMJ diseases is large, and the etiology, epidemiology, disease spectrum, and treatment of the disease remain controversial and unknown. To understand and master the current situation of the occurrence, development and prevention of TMJ diseases, as well as to identify the patterns in etiology, incidence, drug sensitivity, and prognosis is crucial for alleviating patients′suffering.This will facilitate in-depth medical research, effective disease prevention measures, and the formulation of corresponding health policies. Cohort construction and research has an irreplaceable role in precise disease prevention and significant improvement in diagnosis and treatment levels. Large-scale cohort studies are needed to explore the relationship between potential risk factors and outcomes of TMJ diseases, and to observe disease prognoses through long-term follw-ups. The consensus aims to establish a standard conceptual frame work for a cohort study on patients with TMJ disease while providing ideas for cohort data standards to this condition. TMJ disease cohort data consists of both common data standards applicable to all specific disease cohorts as well as disease-specific data standards. Common data were available for each specific disease cohort. By integrating different cohort research resources, standard problems or study variables can be unified. Long-term follow-up can be performed using consistent definitions and criteria across different projects for better core data collection. It is hoped that this consensus will be facilitate the development cohort studies of TMJ diseases.

Objective: To investigate the morphology and position changes of displaced disk with reduction after treatment by modified Twin-block. Methods : 19 patients were diagnosed as displaced disk with reduction and they were treated with modified Twin-block from July 2015 to June 2016. 28 temporomandibular joints (TMJ) of these patients were included in the analysis. The disk length, disk-condylar distance, and disk-condylar angle were measured with MRI before and after treatment. Paired t-test was used. Disk morphology before and after treatment was also documented and analyzed by Wilcoxon signed rank test. The statistical significance was set at P<0.01. Results : 28 TMJ disks were anteriorly displaced with reduction. 24 of them were repositioned while the other 4 were still anteriorly positioned after treatment. The disk length was increased significantly (P<0.01) while the disk-condylar distance and disk-condylar angle were decreased significantly after treatment (P<0.01). The disk morphology as hemiconvex (16) and bi planar (9) were the majority before treatment, while biconcave (16) and biplanar (10) were changed to the larger part after treatment. There was improvement on the disk deformation with a statistical significance (P<0.01). Larger disk-condylar distance, disk-condylar angle and severer deformation of disks were observed in the 4 disks without reposition. Conclusion Modified twin-block is an effective appliance for disk displacement with reduction by repositioning the disk and modifying the disk deformation. However the effect is not good for disks with severer deformation and displacement. Further studies with larger sample and stratified group are still needed.