Objective To supply a scientific basis for laying out a unified standard of reference value of Chinese newborn boys' hemoglobin. Methods After the reference values of 5169 Chinese healthy newborn boys' hemoglobin tested in 78 areas were collected, a research was made on the relationship between the reference value of Chinese newborn boys' hemoglobin and altitude by using curvilinear regression analysis. Results As the altitude gradually increased, the reference value of Chinese newborn boys' hemoglobin gradually increased by index law, with significant correlation (R=0.601, F=43.05, P= 0.0000). One curvilinear regression model was given out: =176.9e 0.00008662x?25.3. Conclusion If altitude of a particular area is known, the reference value of Chinese newborn boys' hemoglobin in this area can be established by using regression model. According to the correlation between Chinese newborn boys' hemoglobin and altitude, China can be divided into three regions: Qinghai-Tibet Region, Central Region, Eastern Region.

Objective To investigate the effect of video-assisted thoracoscopic surgery( VATS) in thoracic disease,and the feasibility to carry out VATS for basic hospital. Methods The data of VATS treatment were collected to compare the differences between study group and control group,and evaluate the the feasibility to carry out VATS for basic hospital. Results The operation time was (100. 75±22. 72) min, blood loss was (54. 27±26. 21) mL,postoperative drainage was (920. 67±171. 99) mL. The postoperative complications were fewer,post-operative hospital stay was shorter,incision time was shorter(P=0. 000) and pain scores was lower(P=0. 000) in study group than that in control group. Basic hospital has the capacity to conduct this technical. Conclusion VATS is feasible to carry out in basic hospital.

To compare the representative novel coronavirus vaccine in the world at present and to provide a new and more comprehensive reference for the research and development of novel coronavirus vaccine. This review summarized the virological and immunological basis of novel coronavirus vaccine and made a detailed comparison and analysis of some representative vaccines based on different technologies and clinical trials in phase 2a/3. The immune effect of many kinds of novel coronavirus vaccines in phase 3 clinical trials around the world is encouraging, but the relationship between vaccine immunogenicity and safety and the reliability of clinical trial data still need to be paid close attention to. Designing new vaccine targets, inducing more extensive immune protection, improving immunogenicity, strict clinical trials and establishing large-scale cohort studies are higher requirements for novel coronavirus vaccine research and development.

Objective To investigate the effects of remimazolam and propofol on postoperative nausea and vomiting(PONV)in patients undergoing painless prostate biopsy,so as to optimize the anesthesia protocols.Methods A retrospective analysis was conducted on the clinical data of 1217 patients who underwent painless prostate biopsy in our hospital during Jan.2023 and Jun.2024.Among them,1093 patients met the inclusion criteria and were divided into two groups:the remimazolam group(n=294)and the propofol group(n=799).After 1∶1 propensity score matching,with 267 patients in either group,a comparison was conducted regarding the incidence of PONV and anesthesia recovery time.Results Before propensity score matching,the remimazolam group had older age[66(53,83)years vs.63(49,78)years],higher body mass index(BMI)[25.30(21.83,29.23)vs.24.46(20.79,28.91)],larger intraoperative use of sufentanil[9(8,10)μg vs.7(6,9)μg],higher intraoperative use rate of ondansetron(55.4％vs.47.6％),and longer surgical duration[16(14,20)min vs.15(13,17)min],with statistically significant differences(P＜0.05).There were no statistically significant differences in the aforementioned factors between the two groups after propensity score matching(P＞0.05).Before propensity score matching,the incidence of PONV was higher in the remimazolam group than in the propofol group(17.7％vs.11.5％,P=0.007),while after propensity score matching,the incidence of PONV did not differ significantly between the two groups(12.7％vs.17.2％,P=0.146).Before and after propensity score matching,the anesthesia recovery time was significantly shorter in the remimazolam group than in the propofol group[3(2,4)min vs.7(4,10)min,P＜0.001].Conclusion Compared with propofol,remimazolam does not increase the incidence of PONV in patients undergoing painless prostate biopsy but can shorten anesthesia recovery time.

Objective:To explore the effect of three-dimensional(3D) design and printing in the reoperation of asymmetric deformity after orthognathic surgery.Methods:Patients of facial asymmetry after orthognathic surgery were included in the Department of Stomatology, Shenzhen University General Hospital and Department of Oral & Maxillofacial Surgery, Shenzhen Stomatology Hospital Affiliated to Shenzhen University from January 2016 to August 2020. Surgical plans and guide plates (positioning guide plate, bone cutting guide plate, reset guide plate) were made by 3D design and printing. During the operations, guide plates were used to guide osteotomy. The facial shape satisfaction of clinicians/patients/third-party were recorded and analyzed at preoperation and 6-12 months postoperation. These patients’ CT scan data was imported to the digital surgery software. Then the distance of chin-midpoint to mid-sagittal plane and the difference of bilateral protuberant point of mandible body to mid-sagittal plane were measured at preoperation and 6-12 months postoperation to determine whether the asymmetry were corrected and postoperative distance were the same as the preoperative design. Data analysis was conducted using SPSS 17.0 statistical software, and measurement data were expressed as Mean±SD. The preoperative and postoperative satisfaction of patients/clinicians/third-party, digital data of preoperation/postoperation and digital data of design-operations/postoperation were analyzed by paired t-test. Analysis of variance and dunnett- t test were used to compare the satisfaction of the surgeon, the third party and patients before and after operation. Results:There were 16 cases of facial asymmetry after orthognathic surgery, including 3 males and 13 females, aged from 18 to 35 years. In 9 cases, genioplasty were used to correct chin deviation. In the other 4 cases, unilateral buccal cortical bone resection were used to correct mandibular body deviation. In the last 3 cases, genioplasty and unilateral buccal cortical bone resection were both applied. All 16 patients successfully received the operation according to the preoperative digital designed plate. Postoperative follow-up ranged 6 months to 1 year. In the 12 cases of genioplasty, the distance of chin-midpoint to mid-sagittal plane reduced from(4.99±0.83) mm preoperatively to (1.63±0.80) mm postoperatively and the difference significant ( t=9.09, P<0.001). There was no significant difference between the distance of preoperative design [(1.50±0.43) mm] and the postoperative one ( t=-0.83, P=0.423). In the 7 cases of unilateral buccal cortical bone resection, the difference of bilateral protuberant point of mandible body to mid-sagitta plane reduced from (7.26±1.20) mm preoperatively to (2.44±0.56) mm postoperatively and the difference was statistically significant ( t=10.26, P<0.001). There was no significant difference was observed between the distance of preoperative design [(2.39±0.16) mm] and the postoperative one ( t=-0.29, P=0.779). The preoperative satisfaction of patients, clinicians and third-party were 65.94±8.21, 79.69±5.91, 79.38±7.50. The postoperative satisfaction of patients, clinicians and third-party were 90.00±5.48, 90.63±2.50, 90.00±4.08. The postoperative satisfaction of patients, chief surgeon and third party was higher than that preoperative satisfaction and the difference was statistically significant( t=-9.15, P<0.001; t=-7.50, P<0.001; t=-6.04, P<0.001). The difference of preoperation satisfaction was statistically significant( F=18.66, P<0.001). The difference of satisfaction of the clinicians and the patients was statistically significant ( P<0.001). The difference of satisfaction of the third-party and the patients was statistically significant ( P<0.001). The difference of postoperation satisfaction was not statistically significant( F=0.12, P=0.889). Conclusions:3D design and printing can 3D analyze comprehensively, simulate surgery accurately, visualize proposed result and guide 3D printing digital guiding plate to perform surgery accurately. In addition, it can improve postoperative satisfaction. So 3D design and printing had obvious advantages in the secondary surgery of asymmetric deformity correction after orthognathic surgery.

Objective:To explore the effect of three-dimensional(3D) design and printing in the reoperation of asymmetric deformity after orthognathic surgery.Methods:Patients of facial asymmetry after orthognathic surgery were included in the Department of Stomatology, Shenzhen University General Hospital and Department of Oral & Maxillofacial Surgery, Shenzhen Stomatology Hospital Affiliated to Shenzhen University from January 2016 to August 2020. Surgical plans and guide plates (positioning guide plate, bone cutting guide plate, reset guide plate) were made by 3D design and printing. During the operations, guide plates were used to guide osteotomy. The facial shape satisfaction of clinicians/patients/third-party were recorded and analyzed at preoperation and 6-12 months postoperation. These patients’ CT scan data was imported to the digital surgery software. Then the distance of chin-midpoint to mid-sagittal plane and the difference of bilateral protuberant point of mandible body to mid-sagittal plane were measured at preoperation and 6-12 months postoperation to determine whether the asymmetry were corrected and postoperative distance were the same as the preoperative design. Data analysis was conducted using SPSS 17.0 statistical software, and measurement data were expressed as Mean±SD. The preoperative and postoperative satisfaction of patients/clinicians/third-party, digital data of preoperation/postoperation and digital data of design-operations/postoperation were analyzed by paired t-test. Analysis of variance and dunnett- t test were used to compare the satisfaction of the surgeon, the third party and patients before and after operation. Results:There were 16 cases of facial asymmetry after orthognathic surgery, including 3 males and 13 females, aged from 18 to 35 years. In 9 cases, genioplasty were used to correct chin deviation. In the other 4 cases, unilateral buccal cortical bone resection were used to correct mandibular body deviation. In the last 3 cases, genioplasty and unilateral buccal cortical bone resection were both applied. All 16 patients successfully received the operation according to the preoperative digital designed plate. Postoperative follow-up ranged 6 months to 1 year. In the 12 cases of genioplasty, the distance of chin-midpoint to mid-sagittal plane reduced from(4.99±0.83) mm preoperatively to (1.63±0.80) mm postoperatively and the difference significant ( t=9.09, P<0.001). There was no significant difference between the distance of preoperative design [(1.50±0.43) mm] and the postoperative one ( t=-0.83, P=0.423). In the 7 cases of unilateral buccal cortical bone resection, the difference of bilateral protuberant point of mandible body to mid-sagitta plane reduced from (7.26±1.20) mm preoperatively to (2.44±0.56) mm postoperatively and the difference was statistically significant ( t=10.26, P<0.001). There was no significant difference was observed between the distance of preoperative design [(2.39±0.16) mm] and the postoperative one ( t=-0.29, P=0.779). The preoperative satisfaction of patients, clinicians and third-party were 65.94±8.21, 79.69±5.91, 79.38±7.50. The postoperative satisfaction of patients, clinicians and third-party were 90.00±5.48, 90.63±2.50, 90.00±4.08. The postoperative satisfaction of patients, chief surgeon and third party was higher than that preoperative satisfaction and the difference was statistically significant( t=-9.15, P<0.001; t=-7.50, P<0.001; t=-6.04, P<0.001). The difference of preoperation satisfaction was statistically significant( F=18.66, P<0.001). The difference of satisfaction of the clinicians and the patients was statistically significant ( P<0.001). The difference of satisfaction of the third-party and the patients was statistically significant ( P<0.001). The difference of postoperation satisfaction was not statistically significant( F=0.12, P=0.889). Conclusions:3D design and printing can 3D analyze comprehensively, simulate surgery accurately, visualize proposed result and guide 3D printing digital guiding plate to perform surgery accurately. In addition, it can improve postoperative satisfaction. So 3D design and printing had obvious advantages in the secondary surgery of asymmetric deformity correction after orthognathic surgery.

Clostridium difficile is an important zoonotic intestinal pathogen, which is widely present in humans and a variety of animals. The ST11 type C. difficile is one of the most widespread and harmful subtypes in the world. As a large country in pig farming, China lacks efficient methods for detecting C. difficile of porcine origin, leaving hidden dangers for the prevention and control of C. difficile. The aim of this study was to develop a specific and sensitive double-antibody sandwich ELISA for the epidemiological investigation of ST11 type C. difficile of porcine origin. Firstly, a 97 kDa receptor binding domain (RBD) was expressed in a prokaryotic host and purified. A hybridoma cell line AE2D3 capable of stably secreting monoclonal antibody targeting the RBD was screened, and the antibody subtype was determined to be IgG2b (κ). Secondly, a double antibody sandwich ELISA method was developed, where the monoclonal antibody targeting the RBD was used as a detection antibody, and the rabbit polyclonal antibody was used as a capture antibody. The chessboard method was used to determine the matching concentration of the capture antibody and the detection antibody, the antigen coating conditions, the blocking conditions, the incubation conditions for detection antibody and samples to be tested, as well as the reaction conditions of HRP-conjugated and reaction conditions of TMB chromogenic solution. The negative cutoff OD₄₅₀ was 0.152, and no cross-reaction with 13 strains of non-ST11 type C. difficile was found. The minimum detection concentration of RBD was 8.83 ng/mL. This specific and sensitive double-antibody sandwich ELISA provides a reliable serological detection method for epidemiological investigation of the ST11 type C. difficile in pig industry.
Animals ; Antibodies, Monoclonal ; Bacterial Proteins/genetics* ; Bacterial Toxins ; Clostridioides difficile ; Enzyme-Linked Immunosorbent Assay ; Hybridomas ; Swine