Objective: To evaluate the effects of pin retention form and different bonding agents on the tensile bond and re-bond strength of Ni/Cr alloy to the enamel. Methods: Sixty bovine permanent incisors were randomly divided into 6 equal groups by the variables of the numbers (0, 1 or 2) of pins to be prepared and bonding agents (Panavia F and Super-Bond C&B). The pin 1mm in diameter and 1mm in depth was prepared vertically to each enamel surface in the groups to be with pins. Cast Ni/Cr alloys cy-linders were made and bonded to respective enamels using two different agents. Tensile strengths were tested. After residual visible resin on the debonded surfaces being removed, specimens were re-bonded and tested in the same way as initial bonding. Results: The tensile strength of Super-Bond C&B groups (11.82 MPa) was significantly higher than those of Panavia F groups (9.28 MPa, P

Objective: To evaluate the influence of retention-form design of resin bonded fixed partial dentures(RBFPDs). Methods: Forty-five metal replicas of posterior metal RBFPDs were divided into 3 groups(n=15):C shape(control group), C shape + axial groove, C shape + pin hole. All the replicas were luted with Panavia F cement and subgroup of 5 specimens were subject to 70 N compressive load cycling for 0 cycles, 240 000 cycles , and 1 200 000 cycles respectively .Half of the cycles was on the central fossa of the pontics and half on the buccal inclined surface of the lingual cusp. Forces for dislodgment of the specimens were applied along the long axis of the abutment at a crosshead speed of 1.0 mm /min. The separation forces were recorded as maxium retention force at the time of dislodgement. Results: Se-paration forces of the C shape group (566.82?71.59 N)0.05). After 1 200 000 cycles, the retention force of the RBFPDs decreased significantly (P

Objective: To compare influences of different retention attachments on stress among supporting structures .Methods: By 3-dimensional laser scanner and reverse engineering computer aided design ( CAD) software , a basic partially edentulous digital model with mandibular premolar and molar missing was established .Implant attachment and removable partial dentures ( RPD) were added into the basic model to build three kinds of models: RPD only, RPD +implant +Locator attachment , and RPD +implant +Magfit attachment .Vertical and inclined loads were put on artificial teeth unilaterally . By means of 3-dimensional finite element analysis , the stress distribution and displacement of the main supportive structures were compared . Results: A complete 3-dimensional finite element model was established , which contained tooth structure , and periodontal structures .The displacement of the denture was smaller in Locator (9.38μm vertically, 45.48μm obliquely) and Magfit models (9.54μm vertically, 39.45 μm obliquely) compared with non-implant RPD model (95.27 μm vertically, 155.70 μm oblique-ly) .Compared with the two different attachments , cortical bone stress value was higher in Locator model ( Locator model 10.850 MPa vertically , 43.760 MPa obliquely;Magfit model 7.100 MPa vertically , 19.260 MPa obliquely).The stress value of abutment periodontal ligamentin Magfit model (0.420 MPa vertically) was lower than that in Locator model (0.520 MPa vertically).Conclusion:The existence of implant could reduce maximum von Mises value of each supportive structure when Kennedy Ⅰpartially edentulous mandible was restored .Comparing the structure of Magfit and Locator attachment , the contact of Magfit attachment was rigid , while Locator was resilient .Locator attachment could improve stability of the denture dramatical -ly.Locator had stronger effect on defending horizontal movement of the denture .

Acupuncture Points ; Acupuncture Therapy ; Adult ; Depression ; psychology ; therapy ; Female ; Humans ; Treatment Outcome

Acupuncture Points ; Acupuncture Therapy ; Adult ; Female ; Humans ; Metrorrhagia ; etiology ; therapy ; Obstetric Labor Complications ; therapy ; Pregnancy

Humans ; Mediastinal Emphysema ; complications ; Paraquat ; poisoning ; Poisoning ; complications ; Pulmonary Fibrosis ; complications ; Subcutaneous Emphysema ; complications

Acupuncture Therapy ; Adolescent ; Humans ; Male ; Sleep Wake Disorders ; therapy ; Treatment Outcome

Objective To evaluate the changes of alveolar cells apoptosis and the expression of related genes in pulmonary injury induced by ischemia/reperfusion (I/R) in acute experimental pulmonary embolism of rabbits. Methods The left lung artery of rabbits were obstructed by inflating gas of 5F Berman sacculus catheter, then the gas of sacculus was put out to result in blood reperfusion. Thirty-six New Zealand rabbits of either gender and weighing 2.5 to 3.0 kg were studied, and randomly divided into six groups: control group (control), sham operation group (sham), ischemia 1h group (I 1h), ischemia 2h group (I 2h), ischemia2h and reperfusion 1h group (IR 1h), ischemia 2h and reperfusion 2 h group (IR 2h). Alveolar cells apoptosis and Bax, Bcl-2, Fas/FasL protein expression were studied By using flow-cytometry and immunocytochemistry techniques. Results The lung apoptosis cell number was increased in ischemia groups compared with control and sham group. The reperfusion after ischemia further increased the apoptosis cell numbers compared with simple ischemia, and the longer time reperfusion,the larger number of cell apoptosis. Bax, Bcl-2, Fas and FasL protein expression were significantly higher in ischemia, ischemia/reperfusion group than that in those of control groups (P

BACKGROUND: Simply used natural materials-prepared scaffolds such as collagen, gelatin and fibrin solve problems of biocompatibility, but its degradation is rapid, and cannot induce new tissues, but collapse is found as cell scaffolds.OBJECTIVE: To explore and determine the property of biological degradable three-dimensional porous scaffolds using silk fibroin-chitosan composite.DESIGN, TIME AND SETTING: The material observational study was performed at the Institute of Bioengineering, Zhejiang Academy of Medical Science from June 2008 to June 2009.MATERIALS: Spring silk cocoon was presented by a silkworm farmer from Huangdunmiao village, Maqiao town, Haining City,Zhejiang Province, China. Chitosan was produced by Shanghai Bo'ao Biological Technology.METHODS: 15 g/L silk fibroin solution was made by degumming, salvation and dialysis. Chitosan was dissolved in 2% acetic acid solution to prepare 25 g/L chitosan-acetic acid solution. Two solutions were mixed to prepare six silk fibroin/chitosan solutions, and mass ratio was 10: 0, 5: 5, 4: 6, 3: 7, 2: 8, 0:10. These solutions were separately sucked in a 24-well plate. Following exhausting gas vacuole at 4 ℃, precooling was performed at -20 ℃ for 12 hours, followed by cryodesiccate for 30 hours. Samples were then hydrated in ethanol, neutralized in NaOH-alcohol for 1 hour, washed and then frozen to dry.MAIN OUTCOME MEASURES: Optical microscope and scanning electron microscope were used to observe pore size and structure of various mass ratio-prepared scaffold. Modified liquid substitution method was utilized to measure porosity of various scaffolds. The degradable rate of various scaffolds was determined at 4 weeks in vitro.RESULTS: Silk fibroin/chitosan of 10: 0 mass ratio-prepared scaffold had rough fluffy pore, was brittle, with high dissolve-loss rates. On the contrary, chitosan-prepared scaffold was hard, without enough elasticity following freeze-dry. The composite scaffold of 5: 5, 4: 6, 3: 7 and 2: 8 following freeze-dry was loose and soft, similar to sponge. With increased chitosan concentration,scaffold hardness increased. There were evenly distributed, detailed eyelets on the scaffold. Under the optical microscope,various pores were irregular; each pore closely connected and linked together; pore size was even, 20-100 μm. With increased chitosan concentration, pore size was gradually reduced. Scaffold porosity determination results displayed that mass ratio of silk fibroin/chitosan 4: 6 group > 5: 5 group > 3: 7 group > 2: 8 group. Compared with 2: 8 group, the porosity was significantly increased in the 5: 5 and 4: 6 groups (P < 0.05). No significant difference was detected in volume expansibility in the silk fibroin/chitosan composite scaffold of various mass ratios (P > 0.05). The degradation was slowest in the 2: 8 group, and fastest in the 5: 5 group at 4 weeks.CONCLUSION: Regarding physical and chemical properties, composite scaffold made by silk fibroin/chitosan showed significant superiority compared with scaffold made by silk fibroin or chitosan alone. Of them, silk fibroin/chitosan mass ratio of 5: 5 and 4: 6 are accorded with the requirement of cartilage tissue engineering.

Objective To compare the efficacy and safety of glargine(Lantus) versus biphasic insulin aspart 30 (30% free and 70% protamine-bound, BIAsp 30) after continuous subcutaneous insulin infusion treatment (CSII) in newly diagnosed type 2 diabetes mellitus. Methods A 20 week open and random study was performed. All 60 patients with newly diagnosed T2DM were randomly divided into two groups. Group B patients was treated by glargine and group A received treatment with BIAsp 30 administered immediately before dinner and breakfast. Blood glucose at 7 time points, glycosylated hemoglobin A1c(HbA1c) and hypoglycemia were observed. Results The postprandial glucose(PPG) was significantly lower in group B than in group A (P<0.05), and the frequency of hypoglycaemic episodes was lower in group B than in group A (P<0.05). The fasting blood glucose(FBG) was not different between two groups (P>0.05). And there was no difference between two groups in HbA1c and other adverse events. Conclusions Glargine is surperior to BIAsp30, not only in controlling the PPG but also in reducing the incidence of hypoglycemia.