Objective To evaluate the value of ultrasonic quantitative method in the diagnosis of liver fibrosis in chronic hepatitis B (CHB) patients. Methods Ultrasonography was performed in 186 CHB patients who underwent liver biopsies. Fifteen indices including liver capsule thickness and fourteen texture parameters of gray level co-occurrence matrix were extracted from standard sonograms and compared with fibrosis stages by histopathology. The status of liver fibrosis was divided into five stages from S0 to S4 by histopathology based on the disease severity. ANOVA and Spearman correlation analysis were applied to analyze the differences and relationships between these indices and pathological stage, respectively. Then discriminant analysis models were established based on the indices for quantitative diagnosis of liver fibrosis. Results Among the fifteen indices, including liver capsule thickness, only the variance (F=0. 55, r=0. 06; both P＞0. 05), sum average (F=0.61, both r=0.05 ; P＞0.05), sum entropy (F=1.68, r=0.09; both P≥0.05) and entropy (F=1.39,r=0.12; both P＞0.05) were not significantly associated with the stages and not manifested linear correlation. Using biopsy results as gold standard, the correct rank rate of discriminant analysis model analysis in the patients staged from S0 to S4 were 80. 0%, 64. 9%, 61.3%, 74. 1% and 80.6 %, respectively. There were 73.1% of cross-validated cases who were accurately classified by the model analysis. The sensitivity, specificity and accuracy in patients with stage ≥ 1 were 97. 6%,80.0% and 91.9%, respectively; those in patients with stage≥2 were 92.1%, 89.7% and 90.9%,respectively; those in patients with stage≥3 were 94.8%, 96.1% and 95.7%; and those in patients with stage 4 were 80. 6%, 97.4 % and 94.6%, respectively. When considered S0 as no fibrosis, S1 as mild fibrosis, S2 and S3 as moderate to severe fibrosis and S4 as early cirrhosis, the consistence rates between discriminant analysis model and biopsy result were 81.7%, 78. 4%, 56. 9% and 90.3%,respectively. There were 74.7% of cross-validated cases who were correctly classified. The sensitivity, specificity and accuracy of the models for determining the fibrosis severity in patients≥mild fibrosis were 97.6%, 81.7% and 92.5%, respectively; those in patients ≥ moderate to severe fibrosis were 83. 1%, 94.8% and 89.2%, respectively; those in patients with early cirrhosis were 90.3%, 93.5% and 93.0%, respectively. Conclusion As a novel and noninvasive method, ultrasonic texture analysis could quantitatively determine liver fibrosis in CHB patients and is worthy of further investigation.

Objective To investigate a method to detect the sentinel lymph nodes(SN) of thyroid papillary carcinoma and its predictive value for cervical metastasis of carcinoma. Methods Intraoperative methylene blue dye mapping was performed in 24 cases of thyroid papillary carcinoma. The coincidence rate of frozen section pathology and routine section pathology of SN was observed,and the predictive value of SN for (metastasis) of the cervical lymph nodes was noted. Results SN was successfully detected in 21(87.5%) of 24 cases. The average number of SN was 3 nodes. There was one false negative case, the false negative rate was 4.8%(1/24), and no false positive cases were found. The predictive value of sentinel lymph nodes to (cervical) lymph node metastasis was 83.3%.Conclusions Methylene blue staining to identify sentinel lymph nodes could accurately predict the status of cervical lymph node metastasis of thyroid papillary carcinoma.

Objective The rate of post -operative complications has been increased with the changes in patients' age,prolonged duration, more severe and diffused lesions, and more patients with complications in recent years. We try to identify the risk factors associated with prolonged stay in the intensive care unit ( ICU ) after coronary artery bypass graft surgery (CABG). Methods 1623 patients who received CABG surgery in Beijing Anzhen Hospital Between June 1, 2006 and December 31,2007 were divided into two groups based on their stay duration in the ICU. Prolonged stay in ICU was defined as 5days or more. Univariate and multivariate analysis ( logistic regression) were used to identify the risk factors. The discrimination and calibration of the result were tested after the risk factors were determined. Results Fifty one patients had prolonged ICU stay, accounting for 3.14% of total cases. Multivariate logistic analysis showed that the age of patients, peripheral vascular diseases, critical status before operation, LVEF, operative status, mitral regurgitation, postoperative respiratory failure,postoperative renal failure, secondary thoracotomy for postoperative bleeding were associated risk factors. Conclusion Prolonged ICU stay after CABG surgery can be predicted based on the above factors. For patients with these risk factors, more pre-and postoperative care strategies are needed.

Objective To explore the clinical outcomes of treating unstable intertrochanteric fractures with proximal femoral locking plate (PFLP) in the elderly patients.Methods From January 2010 to June 2015,380 elderly patients with unstable intertrochanteric fracture were treated with PFLP and successfully followed up at our department.They were 171 men and 209 women,from 60 to 89 years of age (average,68.7 years).By AO classification,there were 58 cases of AO31-A2.2,87 ones of 31-A2.3,130 ones of 31-A3.1,63 ones of 31-A3.2,and 42 ones of 31-A3.3.Operation time,incision length,length of hospital stay,fracture healing time,postoperative complications and hip joint Harris scores were recorded.Results This cohort was followed up for an average of 13.3 months (range,from 8 to 21 months).Their operation time averaged 53.2 min,X-ray exposure 12.2 times,intraoperative blood loss 92.7 mL,incision length 12.6 cm,postoperative drainage volume 54.7 mL,and length of hospital stay 9.2 days.Pulmonary infection was observed in 3 cases,fixation loosening in 8,fixation breakage in 2,hip varus in 9,and fracture nonunion in 4,yielding a total complication rate of 6.8％ (26/380).No operative incision infection was observed.The average fracture healing time was 11.8 weeks (range,from 7 to 48 weeks) after operation.The average Harris score one year postoperation for the 380 patients was 86.3 ± 6.1,significantly higher than the preoperative value (43.6±4.4) (P ＜0.05).There were 96 excellent,231 good,42 fair and 11 poor cases,giving an excellent to good rate of 86.1％.Conclusion Since PFLP has advantages of limited invasion,blood loss and complications,a high rate of fracture healing,and good functional recovery of the hip,it may be a good treatment for unstable intertrochanteric fractures in the elderly patients.

Coronaviruses (CoVs) are generally associated with respiratory and enteric infections and have long been recognized as important pathogens of livestock and companion animals. Mouse hepatitis virus (MHV) is a widely studied model system for Coronavirus replication and pathogenesis. In this study, we created a MHV-A59 temperature sensitive (ts) mutant Wu"-ts18(cd) using the recombinant vaccinia reverse genetics system. Virus replication assay in 17C1-1 cells showed the plaque phenotype and replication characterization of constructed Wu"-ts18(cd) were indistinguishable from the reported ts mutant Wu"-ts 18. Then we cultured the ts mutant Wu"-ts 18(cd) at non-permissive temperature 39.5℃, which "forced" the ts recombinant virus to use second-site mutation to revert from a ts to a non-ts phenotype. Sequence analysis showed most of the revertants had the same single amino acid mutation at Nsp16 position 43. The single amino acid mutation at Nsp16 position 76 or position 130 could also revert the ts mutant Wu"-ts 18 (cd) to non-ts phenotype, an additional independent mutation in Nsp13 position 115 played an important role on plaque size. The results provided us with genetic information on the functional determinants of Nsp16. This allowed us to build up a more reasonable model of CoVs replication-transcription complex.

Objective To compare the results of Danielson procedure with and without prosthetic valve ring in treating Ebstein anomaly and to define the effect of prosthetic valve ring on the procedure.Methods From January 2006 to December 2009,31 cases of Ebstein anomaly over 10 years old were classified as type A or type B according the Carpentier＇s classification scheme.Patients were treated by Danielson procedure or Danielson procedure plus prosthetic valve ring at Anzhen hospital.They were retrospectively classified as Danielson procedure group (group A,n =19) and Danielson procedure plus prosthetic valve ring group (group B,n =12 ).Results There was 1 early in-hospital death due to lung infection and hypoxemia in group A,and no early death in group B ( Fisher exact test,P =0.51 ).The mean follow-up time was ( 23.0 ± 18.5 ) months (5 -41 months).The cumulative follow-up time was 59.42 patient-years.There was one late death in group A due to the redo tricuspid valve plastic procedure because of severe tricuspid regurgitation,and no late death in group B.With echocardiography inspection,11 patients had mild and 7 had moderate to severe tricuspid regurgitation in group A,and only 2 mild tricuspid regurgitation in group B.The tricuspid valve competence after surgery in group B was better than in group A ( Fisher exact test,P=0.024).The 6-minute walk distance test (6MWD) in group B was significantly better than in group A(415 ±41 )m vs ( 382 ± 46 ) m( t test,P =0.047 ).The New York heart functional class in group B was statistically better than in Group A ( P =0.024).Conclusion Although there was no significant difference in the early and late mortality rate between the two groups after surgery,Danielson procedure plus prosthetic valve ring was better than pure Danielson procedure in prevention of late tricuspid regurgitation recurrence,heart function and 6MWD test during follow-up.

Objective To investigate the efficacy of absorbable screw rod system in the treatment of posterior hip dislocation complicated with femoral head fracture.Methods Between February 2009 and June 2014,20 patients were treated at our department for posterior hip dislocation complicated with femoral head fracture.They were 14 males and 6 females,with an average age of 38.2 years (range,from 27 to 60 years).Eight left hips and 12 right hips were affected.By the Pipkin classification,15 cases were type Ⅰ and 5 type Ⅱ.The time from injury to surgery ranged from 3 to 14 days (average,6 days).All of them were treated with absorbable screw rod system after Allis manual reduction.Results The operation time in this group ranged from 1 to 6 hours (average,1.8 hours).The intraoperative blood loss ranged from 70 to 400 mL (average,160 mL).They were followed up for 18 to 48 months (average,32 months).All the fractures united after an average time of 3.4 months (range,from 2.5 to 5.0 months).According to the Harris scores at 6 months postoperation,10 cases were rated as excellent,7 as good,2 as fair and one as poor,with a good to excellent rate of 85.0％.Total hip replacement was performed for 2 fair and one poor cases because their postoperative pain was not relieved and femoral avascular necrosis developed.Conclusion Absorbable screw rod system is an effective treatment of posterior dislocation with femoral head fracture,because it can simplify operative procedures,reduce trauma,fixate the fracture firmly,avoid secondary operation,and reduce postoperative complications.

Objective:To investigate the application effects of SBAR communication mode (situation, background, assessment and recommendation) combined with 3D printing model technology in bed-side teaching of trauma orthopaedics.Methods:A total of 80 clinical medicine students were randomly divided into two groups according to the order of the school number, with 40 students in each group. One was experimental group which received SBAR communication mode combined with 3D printing model technology teaching, and the other one was the control group, which received regular reaching mode. At the end of teaching, the teaching effects were evaluated, including the scores of theoretical examinations and operational examinations, total scores and the anonymous questionnaires. SPSS 22.0 was used for recording and statistical analysis.Results:The average scores of theoretical examinations (48.30±1.41), operational examinations (42.20±1.48) and total scores (90.70±1.38) of experimental group were significantly higher than those of control group [(43.40±1.52); (34.80±1.53); (78.10±1.51)], with significant differences ( P <0.05). The anonymous questionnaires showed that the students in the experimental group had a significant advantage in autonomous learning ability, learning enthusiasm, the ability of literature retrieval and analysis and clinical thinking ability, and enhancing students' humanistic care consciousness in clinical work ( P <0.05). While the two groups had the same recognition in improving problem solving ability, teamwork ability and communication ability with patients, with no significant difference ( P > 0.05). Conclusion:The new teaching mode, SBAR mode combined with 3D printing model technology, applied to trauma orthopaedics bed-side teaching is helpful for students to improve their learning interest and autonomous learning ability, cultivate their lifelong learning habits and their comprehensive quality, so this mode will significantly improve the teaching effects, with good application value.

Objective To establish a comprehensive evaluation indexing system to appraise the implications of prevention and treatment of HIV/AIDS ,and to calculate the weight of each indicator .Methods Based on the idea of performance and input-out-put ,professional consultation ,and Delphi method was determined as the evaluation index system ,analytical hierarchy process (AHP) was used to calculate the weight value for each indicator .Results The evaluation indexing system had been established af-ter three rounds of professional consultation .It contained two 1st class indicators ,six 2nd class indicators and thirty-one in 3rd class indicators .The weight value of each indicator was calculated .Conclusion The evaluation indexing system that has been established and the weight value quantities are of completeness ,practicality ,operability and logic .They have important value for application in the future .

Objective To investigate the advantage and application prospect of 3D printing technology in assisting surgery for complex tibial plateau fractures.Methods The complete clinical data of 41 patients (48 knees) were retrospectively analyzed.And these patients were divided into two groups as 3D printing assisted operation group and traditional operation group,according to whether 3D printing technology was applied.Study was carried out to compare the clinical efficacy of surgery assisted by 3D printing technology and traditional surgery in the treatment of complex tibial plateau fractures.The 3D printing assisted operation group included 18 patients (22 knees,12 males and 6 females),aging from 16 to 68 (mean age 45.5±7.2),and there were 12 cases of Schatzker Ⅴ and 10 Ⅵ.The traditional operation group included 23 patients (26 knees,15 males and 8 females),aging from 19 to 69 (mean age,46.2±6.8),and there were 14 cases of Schatzker Ⅴ and 12 Ⅵ.The operation time,intraoperative blood loss,the Rasmussen score and hospital for special surgery knee score (HSS) at 6 weeks post-operation were analyzed and the difference between the two groups was tested.Results All those patients were followed up for 7 to 20 months (mean 15 months).For 3D printing assisted operation group,the mean operation time was 81.4±6.3 min for Schatzker Ⅴ and 90.6± 15.4 min for Schatzker Ⅵ;the mean intraoperative blood loss was 200.4±72.3 ml for Schatzker Ⅴ and 280.6±101.6 ml for Schatzker Ⅵ;the result of 6-week Rasmussen score was 14 excellent,6 good and 2 fair (excellent and good rate 90.9％);the result of 6-week HSS score was 15 excellent,5 good and 2 fair (excellent and good rate 90.9％).Then for traditional operation group,the mean operation time was 100.4± 15.3 min for Schatzker Ⅴ and 111.5±20.2 min for Schatzker Ⅵ;the mean intraoperative blood loss was 450.4±173.3 ml for Schatzker Ⅴ and 500.5±247.2 ml for Schatzker Ⅵ;the result of 6-week Rasmussen score was 14 excellent,8 good,2 fair and 2 bad (excellent and good rate 84.6％);the result of 6-week HSS score was 13 excellent,8 good,2 fair and 3 bad (excellent and good rate 80.8％).The difference in operation time,intraoperative blood loss had statistical significance between the two groups;but the difference in 6-month post-operation Rasmussen score and HSS score had no statistical significance.Conclusion Compared with traditional surgery,3D printing technology assisted surgery for complex tibial plateau fracture possesses advantage such as shortened operation time,reduced intraoperative blood loss;but there's no evidence for improved knee function at 6 weeks post-operation.