Objective: To investigate the effect of tumor necrosis factor-α converting enzyme (TACE) on mucous hypersecretion in inlf ammatory airway. Methods: Mucous hypersecretion model of human lung adenocarcinoma cells A549 was induced by human neutrophil elastase (HNE), and TNF-α converting enzyme inhibitor-1 (TAPI-1), an inhibitor of TACE, was chosen for the inference study. The expression of MUC5AC and TACE was examined. hT e cells were divided into 5 groups: a negative control group, HNE1 (15 nmol/L) group, HNE2 (25 nmol/L) group, HNE3 (50 nmol/L) group and TAPI-1 group. RT-PCR was used to examine MUC5AC and TACE mRNA expression. The protein expression of TACE and MUC5AC was examined by Western blot and ELISA, respectively. Results: HNE induced the TACE and MUC5AC mRNA and protein expression in a dose-dependent manner. Compared with the control group, the increases were all signiifcantly increased in the three dosages of HNE group (P<0.01). The HNE-induced TACE and MUC5AC mRNA and protein expression were dramatically attenuated in the presence of TAPI-1, an inhibitor of TACE (P<0.01). Conclusion: TACE participated cell signalling pathway of airway mucous hypersecretion, and could down regulation the level of inlfammation airway mucous hypersecretion.

AIM: The aim of the present study is to investigate changes of five biochemical markers of bone turnover during the formation of ovariectomized rat model. METHODS: Three-month-old female SD rats were divided randomly into ovariectomized (OVX) group, sham-operated (sham) group and control group. Five biochemical markers of bone turnover levels, including serum osteocalcin (OC), total alkaline phosphatase (ALP), bone-specific alkaline phosphatase (BALP), tartrate-resistant acid phosphatase (TRAP) and hydroxyproline (HYP) were measured before and at 1, 1.5, 2, 2.5, 3 and 4 months after surgery. The right proximal tibias of rats were excised at the same time point for histopathological observation. RESULTS: Serum OC, ALP, BALP, TRAP and HYP levels in OVX group were significantly higher than that in sham group. As regard to the time of peak level arrived, the sequence of changes was as follows: TRAP/HYP→OC→ALP/BALP. There was a significant positive correlation between five markers. The pathological changes of trabecular bone in OVX group were only observed 3 months after surgery. CONCLUSION: The results suggest that postmenopausal osteoporosis has a high bone turnover rate. During the formation of ovariectomized rat model, changes of bone resorption markers precede changes of bone formation markers. Serum OC, ALP, BALP, TRAP and HYP are sensitive to evaluate the bone loss in the earlier stage of postmenopausal osteoporosis.

14 years) in female. ICA-C4: (4.3?0.6) mm in male, (3.9?0.6) mm in female. A1 segment of anterior cerebral artery (ACA-A1): (2.1?0.4) mm in male, (2.1?0.4) mm in female. Anterior communicating artery (ACoA): (1.4?0.4) mm in male, (1.3?0.4) mm in female. M1 segment of middle cerebral artery (MCA-M1): (2.7?0.4) mm in male, (2.6?0.4) mm in female. Basilar artery (BA): (2.9?0.5) mm in male, (2.8?0.4) mm in female. P1 segment of posterior cerebral artery (PCA-P1): (2.1?0.5) mm on the left and (2.0?0.5) mm on the right in male, (2.0?0.3) mm on the left and (1.9?0.3) mm on the right in female. PCA-P2: (1.8?0.4) mm in male, (1.7?0.3) mm in female. Posterior communicating artery (PCoA): (1.1?0.3) mm in male, (1.2?0.4) mm in female. Among various diameters, only PCA-P1 had significant difference between the left and the right (P=0.003); only MCA-M1 (P=0.048), PCA-P1 (P=0.012), ICA-C2 (P=0.000) and C4 segments (P=0.000) had significant differences in gender, respectively; and only ICA-C2 had significant difference in age (P=0.001). Of these significantly different diameters, the diameters in male were larger than those in female. There were significant correlation between PCA-P1 and PCA-P2 (r=0.652,P=0.000), and between ICA-C2 and ICA-C4 in female group (r=0.550,P=0.000), respectively. Conclusions The normal values of diameter of cerebral arteries on MR angiograms may play a reference role in diagnosing cerebral vascular diseases.

In recent years,with the progress of the technology in genetics,imaging and molecular biology,the study of malformation of cortical development (MCD) has gradually shifted from phenotype to genotype.Genetic studies of MCD have found that MCD is associated with a number of non-ion channel family genes and so far more than 100 genes have been reported to be associated with one or more kinds ofMCD.Tubulin gene is one of the important categories,and it has been found that can lead to mcrolissencephaly,lissencephaly or polymicrogyria of MCD.Based on these three key links of MCD,we will review the relationship between the diseases and the tubulin genes from many aspects.

The Department of Radiology of West China Hospital of Sichuan University provides us a teaching model that image-reading combined with problem-based learning (PBL) for radiographer once a month. Based on the problem images and typical cases, after careful image-reading, radiographer is guided to think positively and propose specific solutions to the problems. Then designated personnel gives a detail lecture on related diseases, imaging performance, diagnostic requirements, conventional scanning schemes, operating specifications, common problems and image post-processing, etc., which aims at taking continuing education for radiographers.

Objective To investigate the correlation between C-reactive protein (CRP) level at admission and severity and early outcome of acute ischemic stroke.Methods Inpatients with acute ischemic stroke were enrolled retrospectively.The demographic and clinical data were collected.The National Institutes of Health Stroke Scale (NIHSS) at admission was used to evaluate the neurologic deficits,≤8 was defined as a mild stroke and ＞ 8 was defined as a severe stroke.The modified Rankin scale was used to evaluate the outcomes at discharge,0-2 was defined as good outcome and ＞ 2 was defined as poor outcome.Multivariate logistic regression analysis was used to determine the independent influencing factors of severity and early outcome of acute ischemic stroke.Results A total of 120 patients with acute ischemic stroke were enrolled in the study.Their mean age was 63.35 ± 11.51 years,71 (59.17％) were males;81 had mild stroke (67.5％),39 (32.5％) had moderate to severe stroke;71 (59.17％) had good outcome,and 49 (40.83％) had poor outcome.There were significant differences in the age,CRP level,and proportions of ischemic heart disease,atrial fibrillation,smoking,and drinking between the mild stroke group and the moderate to severe stroke group (all P ＜0.05).Multivariate logistic regression analysis showed that ischemic heart disease (odds ratio [OR] 4.407,95％ confidence interval [CI] 1.100-17.653;P=0.036),atrial fibrillation (OR 6.603,95％ CI 1.190-36.635;P =0.031) and CRP (OR 1.022,95％ CI 1.001-1.043;P =0.041)were independently and positively correlated with the severity of stroke.There were significant differences in baseline NIHSS score,fibrinogen and CRP level,as well as the proportions of the patients with atrial fibrillation,smoking,and drinking between the good outcome group and the poor outcome group (all P ＜0.05).Multivariate logistic regression analysis showed that smoking (OR 8.895,95％ CI 1.699-46.557;P=0.010),baseline NIHSS score (OR 2.241,95％ CI 1.567-3.206;P ＜0.001),and CRP (OR 1.195,95％ CI 1.030-1.386;P =0.019) were independently correlated with the early poor outcomes.Conclusion CRP level at admission was the independent influencing factor of severity and early outcome of acute ischemic stroke.

Objective To study the application value of CAD/CAM technology in the teaching of inlay manufacturing.Methods A total of 60 undergraduates interned in the Department of Stomatology,Yan'an Hospital,Kunming Medical University were randomly divided into an experimental group(n=30)and a control group(n=30).We selected appropriate clinical cases for students to prepare for mandibular molar's proximal occlusal inlays.The instructor guided the results of the first preparation in different ways,and the students made the second modification and preparation,and the assessment team scored and evaluated the five aspects of the final preparation,the shape of the preparation,the shape of the occlusal surface,the dovetail retention,and the adjacent surface.Results The scores of all detection indexes in the experimental group were higher than those in the control group(P<0.05).Conclusion The application of CAD/CAM technology in inlay manufacturing teaching can effectively improve students'clinical hands-on ability and achieve better teaching effects than traditional teaching methods.