Aim To observe the regulatory effects of astragalus polysaccharide (APS) on AKT/PI3K signa-ling pathway in lung cancer A549 cells. Methods The autophagy model was established by xanthine oxidase (XOD). Then the intervention was carried out with 100, 200, 400 mg • L"1 of APS and 3-methylade-nine (3-MA). Cell Counting Kit-8(CCK-8) method, transmission electron microscope and Western blot were used to detect the effect of APS on the proliferation, autophagy and autophagy marker molecules respectively in lung cancer A549 autophagy model. Results Compared with blank group, cell growth of the model group was accelerated; the number of autophagosomes increased , and the expressions of microtubule-associated protein 1 light chain-3B (LC3B) and PI3K significantly increased, while p62 and AKT markedly decreased (P < 0. 05) . Compared with model group, cell growth slowed down, and the number of autophagosomes decreased; the expression of LC3B and PI3K significantly decreased. However, p62 AND AKT expression significantly increased (P <0. 05) in 200 or 400 mg • L"'of APS-treatedgroups. Compared with 3-MA-treated group,the expression of LC3B significantly decreased in 200 mg • L"1 of APS-treated group(P <0. 05), and PI3K significantly decreased in 400 mg • L"1 of APS-treated group (P < 0. 05). Conclusion APS may exert anti-tumor effect by down-regulating PI3K/AKT signaling pathway of human lung cancer A549 cells.

Objective To explore the relationship between psychological problems in middle school students and parental rearing behaviors.Methods It was a cross-sectional study.By means of cluster sampling,2700 students selected from 7 middle schools in Nanning were investigated with Symptom Check List-90(SCL-90),the Egna Minnen Barndoms Uppfostran(EMBU) scale and the General Information Questionnair.Results The prevalence of psychological problems was 14.5%.Correlation analysis showed that the total score and factor-scores of SCL-90 had positive correlation with parental punishment,rejection,preference and overprotection.The total score and factor-scores of SCL-90 was negatively related to parental emotional concern.Conclusions Psychological problems in middle school students are closely related to parental rearing behaviors,and incorrect parental rearing behavior is one risk factor of psychological problems in the middle school students.

Objective: To study the effects of fortified conjugated linoleic acid (CLA) milk on body fat and plasma lipids in mice.Method:Forty male Kunming mice of 4 w old were randomly divided into four groups and fed diet and milk supplemented with 0%,0.1%,0.5%,1.0% CLA (percent of diet, dry mass) respectively for 4 w.Weight gain,body fat,intra-abdominal fat,feed conversion efficiency and plasma TG, TC, HDL , LPL were measured.Results:At the end of the experiment, all these physiological indices were decreased with increasing CLA in the milk and were lower significantly than that of control group when supplemented with 0.5% CLA in milk. TG , TC and (TC- HDL) / HDL were decreased, but HDL and LPL were increased with increasing CLA amount in the milk. TG,HDL,LPL and (TC- HDL)/ HDL were best when fed the milk supplemented with 1.0% CLA,while TC was the lowest when fed the milk supplemented with 0.5% CLA . Conclusion:The fortified conjugated linoleic acid is effective in lowering body fat and blood lipids.

OBJECTIVE: To evaluate the effect of microwave polymerization and water-bath heat polymerization on accuracy and flexural strength of denture base resin. METHODS: Ten maxillary complete dentures were prepared and divided into microwave polymerization and water-bath heat polymerization groups according to random number table, with 5 dentures in each group. In the microwave polymerization group, the dentures were heated for 9 minutes with 40% firepower, natural cooled, the pressure of flasking at 4.5 kg/mm~2. In the water-bath heat polymerization group, the temperature increased from room to 70℃, sustained for 1.5 hours, then rise to 100℃ for 0.5 hour. The dentures were maintained at 25℃ thermostatic water bath for a week. The denture base, as well as standard cast was cut down at posterior border of the second molar. Dimensional accuracy between the posterior border of upper complete denture and standardized cast at five different positions was measured by digital microscope. Specimens with 64 mm× 10 mm×2.5 mm were made for measuring flexural strength.RESULTS: ①The posterior border gaps between the upper complete denture and standardized cast was (141±78) urn and (147±74) μm cured by microwave polymerization and water-bath heat polymerization, which has no statistical difference. The flexural strength of denture base resin cured by the microwave polymerization and water-bath heat polymerization was (81.60±14.04) MPa and (84.24±17.65) MPa, and there was no statistical difference (P > 0.05). CONCLUSION: There is no significantly difference in the accuracy and flexural strength cured by microwave polymerization and by water-bath heat polymerization, but the microwave polymerization takes shorter time than that by water-bath heat polymerization.

To set up a new method of detecting bacterial number in situ,NADH fluorescence method based on the fluorescent characteristic of NADH was used.When the concentration of NADH ranged from 10 nmol/L to 0.2 mmol/L,its concentration had a good line relationship to the fluorescence intensity(R2= 0.9905).Separating bacterial cells by centrifugation and extracting NADH with hot Tris-HCl buffer,the re-sult of bacterial count detected with NADH standard plot was 1?104 CFU/mL in an hour.In summary,NADH fluorescence method is rapid,sensitive,simple and reliable to detect total bacterial number.There-fore,the method can be widely applied in the field of food sanitation and safety,environment detection and so on.

Objective: To evaluate the safety and efficacy of intratumoral injection of polylactic-co-glycolic acid (PLGA) microspheres containing cobra venom cytotoxin in nude mice with transplanted human hepatoma. Methods: Cytotoxic activity of cytotoxin from cobra venom was determined by using methyl thiazolyl tetrazolium method in vitro. Microspheres containing cobra venom cytotoxin were prepared with a double emulsion-solvent evaporation method. Forty BALB/c nude mice were inoculated subcutaneously in right flank with hepatoma BEL-7404 cells. Thirty-two mice whose tumor size reached about 1.0 cm in diameter, were randomly assigned into normal saline group, blank microsphers group, cytotoxin group and cytotoxin-PLGA group. Nude mice were intratumorally injected with normal saline, blank microspheres, cytotoxin or cytotoxin-PLGA microspheres respectively. Internal echo characteristics and blood flow of tumors were observed by high-frequency ultrasound every week after treatment. Twenty-six days after treatment, the tumors were removed to calculate the inhibition rate of tumor growth. The tumor, heart, liver and kidney tissues were obtained for histopathological examination. Results: The cytotoxin separated and purified from crude cobra venom caused intense cytotoxic effects to the BEL-7404 cells in vitro. The diameter of PLGA microspheres containing cobra venom cytotoxin was about (34.45+/-9.85)mum. Encapsulation rate was up to (78.13+/-8.92)%, and cumulative amount of cobra venom cytotoxin released from the PLGA microspheres in vitro during 30 days was up to 84.3%. After intratumoral injection, tumor volumes and weights in the cytotoxin-PLGA group were lower than those in the normal saline group, with a tumor growth inhibition rate of 52.36%. Observed under a light microscope, most tumor tissues were necrotic. No obvious morphological change could be seen on the liver, kidney and heart tissues. Conclusion: The above findings indicate that intratumoral injection of cytotoxin-PLGA microspheres has strong antitumor effect and can obviously lessen systemic toxicity, which may provide an effective and feasible method for hepatocellular carcinoma treatment.

OBJECTIVEThis study aims to investigate the caries status of the first permanent molar and primary tooth among 7- to 9-year-old children in Tangshan city and the correlation between caries of primary tooth and the first permanent molar.

METHODSA stratified cluster sampling method was used on the basis of the Basic Approach of Oral Health Survey of WHO and the Guideline of the Third National Oral Health Survey. A total of 10 primary schools were randomly sampled in clusters that included 51 primary school sampling spots in Tangshan. The caries status of 1 794 children aged 7 years to 9 years was examined.

RESULTSThe prevalence rate of the first permanent molar caries was 47.49% (852/1 794), the mean number of DMFT was 1.30 ± 1.59, the mean number of DMFS was 1.96 ± 3.40, and the filling rate was only 2.35% (20/852). The preva- lence rate and mean DMFT of the first permanent molar caries showed significant difference between different ages and genders (P < 0.05). However, the mean DMFS of the first permanent molar caries only showed significant difference between the various ages (P < 0.05). The prevalence rate of the primary tooth caries was 83.11% (1 491/1 794), the mean number of dmft was 4.82 ± 3.55, the mean number of dmfs was 6.51 ± 5.61, and the filling rate was 12.41% (185/1 491). Caries of primary tooth was the first permanent molar caries risk factor [r = 0.277, OR = 5.736, P = 0.00, 95% CI (4.175, 7.881)]. Significant correlation was found between the caries of primary tooth and first permanent molar (r = 0.274, P < 0.001).

CONCLUSIONCaries status of the first permanent molar among 7- to 9-year-old children in Tangshan city is serious. Caries status of primary tooth may play an important role in predicting the first permanent molar caries in clinic and prevention.

Child ; Child, Preschool ; Contrast Media ; adverse effects ; Coronary Angiography ; Female ; Humans ; Infant ; Iohexol ; adverse effects ; Kidney ; drug effects ; physiology ; Male ; beta 2-Microglobulin ; urine

Objective To estimate the degree of oxidative stress and atherosclerosis praecox in patients with systemic lupus erythematosus (SLE), and emphasize on exploring AOPPs' clinical significance in premature atherosclerosis in SLE. Methods The levels of AOPPs, Hey, MDA, SOD, baPMV and CIMT were detected by ELISA and spectropholometry in 44 non-menopausal female SLE patients and 31 healthy middle-aged women respectively, and baPWV. The results were compared with AOPPs of the two groups. Then each group was stratified based on disease duration (≥5 years or <5 years) and the disease activity(active and inactive) in SLE patients. The patients' TC, TG, LDL were analyzed. T test, t' test and Pearson correla-tion were selected. Results The levels of AOPPs, Hcy, MDA in SLE patients were significantly higher than those of the healthy controls (P<0.05). The activities of SOD were lower than controls (P<0.05). The levels of AOPPs, Hcy, MDA, SOD had statistical significance between SLE patients disease duration ≥5 years or <5 years, active or inactive groups. There were two cases with CAP in patients with SLE (more than 5 years disease duration),while there wasnone in healthy controls. The levels of baPWV and CIMT in patients with SLE were higher than healthy controls (P<0.05), and had statistical significance in SLE patients disease duration more than or less than 5 years (P<0.05). The oxidative stress targets (AOPPs, Hey, MDA, SOD) had significant correlation with the level of baPWV and CIMT (P<0.01). The level of serum AOPPs had significant positive correlation with the levels of Hcy, TC, TG and LDL (P<0.01～0.05). Conclusion SLE patients have increased oxidative stress , and significantly higher prevalence of atherosclerosis than healthy controls. The disease duration and oxidative stress play important roles in the duration of atherosclerosis. AOPPs probably involves in the accelerated atherosclerosis of SLE patients. It may be a predictor for SLE complicated with atherosclerosis praecox.

Objective:To evaluate the effects of the flowable resin used as pit and fissure sealant using different etching adhesive systems.Methods:60 caries-free extracted human premolars were randomly divided into 4 groups(n =1 5)and treated by Gluma, NT and 3M-Z350 flowable resin(group A);Clearifil SE Bond adhesive and 3M-Z350 flowable resin(group B),phosphoric acid etching,3M-Z350 flowable resin and phosphoric acid etching(group C)and 3Mconcise sealant(group D)respectively.After pro-cessing the tooth surface the pit and fissue of 1 0 sample in each group were sealed.The microleakage was measured by 1 % methyl-ene blue staining(n =8).The material-enamel interface was observed by SEM(n =2).The shear bond strength of the column-shaped samples with the diameter and the height of 3 mm(n =5)on the mesial or dental surface was examined by a test machine. The sealant cartridges and flowable resin cartridges with the diameter and height of 4 mm were used for the crushing strength exami-nation(n =1 0).Results:There was no significant difference in the microleakage among the 4 groups.SEMobservation showed that the resin tags of group A were long and dense and the resin tags of group B were short and sparse,bubbles and cracks were found on the local site in group A and B.The resin tags of group C were long and thin,but combined with tooth tightly;the resin tags of group D were short and dense;the penetration was poor at the bottom of the fissures in the 4 groups.The shear bond strength of Group A was the highest(P <0.01 ),that of group C was higher than that of group B and D(P <0.05).There was no significantly difference between group B and D(P >0.05).The compressive strength of flowable resin groups was higher than that of fissure seal-ant group(P <0.05).Conclusion:The shear bond strength and compressive strength of all-etching bonding system combined with flowable resin is superior to that of self-etching bonding system combined with flowable resin and the traditional sealant.Using Prime&Bond NT bond after acid etching may improve the shear bonding strength.