BACKGROUND:Cardiac dysfunction due to spinal cord injury is an important factor of death in patients with spinal cord injury;however,the specific mechanism is still not clear.Therefore,revealing the mechanism of cardiac dysfunction in spinal cord injury patients is of great significance to improve their quality of life and survival rate. OBJECTIVE:To investigate the mechanism of luteolin in improving serum-induced myocardial cell death in spinal cord injury rats. METHODS:Allen's impact instrument was used to damage the spine T9-T11 of male SD rats to establish a spinal cord injury model meanwhile a sham operation group was set as the control group.The serum of rats of each group was collected.H9c2 cells were divided into a blank control group,a sham operated rat serum group,a spinal cord injury rat serum group and a luteolin pretreatment group.The cells in blank control group were only cultured with ordinary culture medium.The cells in the sham operated rat serum group were treated with medium containing 10%serum from sham operated rat.The cells in the spinal cord injury rat serum group were treated with medium containing 10%serum from spinal cord injury rat.The cells in the luteolin pretreatment group were precultured with a final concentration of 20 μmol/L luteolin for 4 hours and then changed to a medium containing 10%rat serum from spinal cord injury rat.After 24 hours of culture,the survival rate of each group of H9c2 cells was measured by CCK-8 assay.Western blot assay was used to detect the expression of autophagy related protein LC3 and p62 in H9c2 cells in each group. RESULTS AND CONCLUSION:Compared with the blank control group,there was no significant change in cell survival rate in the sham operated rat serum group(P>0.05).Compared with the sham operated rat serum group,the cell survival rate(P<0.01)and the expression of LC3 protein(P<0.05)in spinal cord injury rat serum group was significantly reduced,and the expression of p62 protein was significantly increased(P<0.05).Compared with the spinal cord injury rat serum group,the survival rate of cells in the luteolin pretreatment group significantly increased(P<0.000 1);the expression of LC3 protein significantly increased(P<0.05),and the expression of p62 protein significantly decreased(P<0.05).The results indicate that luteolin may improve myocardial cell death induced by serum from rats with spinal cord injury by promoting autophagy.

BACKGROUND:Currently,different methods of model establishment have been derived from different injury modes of spinal cord injury.Traditional physical injury modeling methods have their own advantages and disadvantages,and there is a lack of more effective and stable animal models of spinal cord injury. OBJECTIVE:To establish a reproducible,controllable,trauma-free,low-mortality,more stable,widely applicable,and short-term postoperative care rat model of spinal cord injury. METHODS:Forty Sprague-Dawley rats with similar body mass and ages were randomly divided into a control group and an improved group,with 20 rats in each group.Animal models of spinal cord injury in the control group were constructed using a clip model method,while the improved group used a modified ligation method based on the compression method to make the spinal cord injury models using suture ligation based on fenestration.Postoperative comparisons were made between the two groups,assessing urination behavior,hematuria,pyuria(infection rate),mortality,scoliosis rate and Basso-Beattie-Bresnahan locomotor rating scale scores at 1,3,5,and 7 days after modeling. RESULTS AND CONCLUSION:Compared with the conventional modeling method,the modified ligation method based on the compression method resulted in faster recovery of urination behavior,lower hematuria rate,lower infection rate,lower mortality rate,lower scoliosis rate,and more concentrated and stable Basso-Beattie-Bresnahan scores(all below 2 points within 1 week).This proves that the modified ligation method based on compression is more suitable for the establishment of spinal cord injury models in rats.

BACKGROUND:Gradient artificial bone repair scaffolds can mimic unique anatomical features in musculoskeletal tissues,showing great potential for repairing injured musculoskeletal tissues. OBJECTIVE:To review the latest research advances in gradient artificial bone repair scaffolds for tissue engineering in the musculoskeletal system and describe their advantages and fabrication strategies. METHODS:The first author of the article searched the Web of Science and PubMed databases for articles published from 2000 to 2023 with search terms"gradient,bone regeneration,scaffold".Finally,76 papers were analyzed and summarized after the screening. RESULTS AND CONCLUSION:(1)As an important means of efficient and high-quality repair of skeletal system tissues,gradient artificial bone repair scaffolds are currently designed bionically for the natural gradient characteristics of bone tissue,bone-cartilage,and tendon-bone tissue.These scaffolds can mimic the extracellular matrix of native tissues to a certain extent in terms of structure and composition,thus promoting cell adhesion,migration,proliferation,differentiation,and regenerative recovery of damaged tissues to their native state.(2)Advanced manufacturing technology provides more possibilities for gradient artificial bone repair scaffold preparation:Gradient electrospun fiber scaffolds constructed by spatially differentiated fiber arrangement and loading of biologically active substances have been developed;gradient 3D printed scaffolds fabricated by layered stacking,graded porosity,and bio-3D printing technology;gradient hydrogel scaffolds fabricated by in-situ layered injections,simple layer-by-layer stacking,and freeze-drying method;and in addition,there are also scaffolds made by other modalities or multi-method coupling.These scaffolds have demonstrated good biocompatibility in vitro experiments,were able to accelerate tissue regeneration in small animal tests,and were observed to have significantly improved histological structure.(3)The currently developed gradient artificial bone repair scaffolds have problems such as mismatch of gradient scales,unclear material-tissue interactions,and side effects caused by degradation products,which need to be further optimized by combining the strengths of related disciplines and clinical needs in the future.

BACKGROUND:Post and core restoration is a common choice for tooth defects,but the repair effects of various post and core materials are different. OBJECTIVE:To evaluate the stress distribution at the post and core,tooth root,and bonding agent site of post and core models made of different elastic modulus post and core materials using finite element method. METHODS:A three-dimensional root canal treated maxillary central incisor model was built using three-dimensional modeling software,which was restored with a full ceramic crown.The post and core materials in the restoration used nanoceramic resin(elastic modulus=12.8 GPa),composite resin(elastic modulus=16 GPa),hybrid ceramic(elastic modulus=34.7 GPa),glass ceramic(elastic modulus=95 GPa),titanium alloy(elastic modulus=112 GPa),and zirconia(elastic modulus=209.3 GPa).The model was fixed in cortical bone.A 100 N concentrated force of 45° from the long axis of the tooth was applied to 1/3 of the crown and tongue side of the central incisor.The stress distribution of the post and core,dentin,and tooth-root bonding agent in the model was repaired by the maximum principal stress criterion. RESULTS AND CONCLUSION:(1)When the post and core materials with higher elastic modulus was used,the post-core stress in the repair model was more concentrated.When the elastic modulus of the post and core materials(nanoceramic resin and composite resin)was close to dentin,the stress distribution of the post and core was more uniform.The stress distribution of dentin in all restoration models was similar regardless of post and core materials.When the post and core with higher elastic modulus was used,more stress concentration was shown at the post and root bonding agent in the repair model.(2)The maximum stress values at the post and core,tooth root,and the bonding agent site of post and tooth root in the nanoceramic resin model were 31.00,33.21,and 0.51 MPa,respectively.The maximum stress values at the post and core,tooth root,and the bonding agent between the post and tooth root in the composite resin model were 36.84,33.14,and 0.59 MPa,respectively.In the mixed ceramic model,the maximum stress values at the post and core,tooth root,and the bonding agent between the post and tooth root were 64.05,32.83,and 1.00 MPa,respectively.In the glass ceramic model,the maximum stress values at the post and core,tooth root,and the bonding agent between the post and tooth root were 112.30,32.69,and 1.73 MPa,respectively.In the titanium alloy model,the maximum stress values of the post and core,tooth root,and the bonding agent between the post and tooth root were 120.00,32.17,and 1.86 MPa,respectively.In the zirconia model,the maximum stress values of the post and core,tooth root,and the bonding agent between the post and tooth root were 148.80,31.85,and 2.28 MPa,respectively.(3)The higher the elastic modulus of the post and core material,the higher the maximum stress at the post and core during restoration.The elastic modulus of the post and core material had no significant effect on the maximum stress of the dental bonding agent and dentin.

ObjectiveTo study the mechanism of compound Xishu granules （CXG） in inhibiting the proliferation of hepatocellular carcinoma cells by regulating ferroptosis. MethodsThe transplanted tumor model of human Huh7 was established with nude mice and the successfully modeled mice were randomized into model， Fufang Banmao （0.21 g·kg^-1）， low-dose （1.87 g·kg^-1） CXG， medium-dose （3.74 g·kg^-1） CXG， and high-dose （7.49 g·kg^-1） CXG groups. Mice were administrated with drinking water or CXG for 28 days， and the body weight and tumor volume were measured every 4 days. Hematoxylin-eosin staining was employed to observe the histopathological changes of tumors. The cell-counting kit-8 （CCK-8） was used to examine the survival rate of Huh7 cells treated with different concentrations （0， 31.25， 62.5， 125， 250， 500， 1 000 mg·L^-1） of CXG for 24 h and 48 h. CA-AM， DCFH-DA， and C11-BODIPY^581/591 fluorescent probes were used to determine the intracellular levels of ferrous ion （Fe²⁺）， reactive oxygen species （ROS）， and lipid peroxide （LPO）， respectively. The colorimetric method was employed to measure the levels of glutathione （GSH） and superoxide dismutase （SOD）. Western blot was employed to determine the protein levels of glutathione peroxidase 4 （GPX4）， transferrin receptor 1 （TFR1）， and ferritin heavy chain 1 （FTH1）， respectively. ResultsIn the animal experiment， compared with the model group， the drug treatment groups showed reductions in the tumor volume from day 12 （P<0.01）. After treatment， the Fufang Banmao and low-， medium-， and high-dose CXG groups had lower tumor volume， relative tumor volume， and tumor weight than the model group （P<0.05）， with tumor inhibition rates of 48.99%， 79.93%， 91.38%， and 97.36%， respectively. Moreover， the CXG groups had lower tumor volume and relative tumor volume （P<0.05 in all the three dose groups） and lower tumor weight （P<0.05 in medium-dose and high-dose groups） than the Fufang Banmao group. Compared with the model group， the drug treatment groups showed reduced number of tumor cells， necrotic foci with karyopyknosis， nuclear fragmentation， and nucleolysis， and the high-dose CXG group showed an increase in the proportion of interstitial fibroblasts. In the cell experiment， compared with the blank group， CXG reduced the survival rate of Huh7 cells in a dose-dependent manner after incubation for 24 h and 48 h （P<0.05）. Compared with the blank group， the RSL3 group and the low-， medium-， and high-dose CXG groups showed a decrease in the relative fluorescence intensity of CA-AM and increases in the fluorescence intensity of DCFH-DA and fluorescence ratio of C11-BODIPY^581/591， which indicated elevations in the levels of Fe²⁺ （P<0.01）， ROS （P<0.05）， and LPO （P<0.01）， respectively. Compared with the blank group， the RSL3 and low-， medium-， and high-dose CXG groups showed lowered levels of GSH and SOD （P<0.05）. In addition， the RSL3 group and the medium- and high-dose CXG groups showed down-regulated expression of GPX4 and FTH1 （P<0.05）， and the low- and high-dose CXG groups presented up-regulated expression of TFR1 （P<0.05）. ConclusionCXG suppresses the proliferation of hepatocellular carcinoma cells by inducing ferroptosis via downregulating the GSH-GPX4 signaling axis and increasing intracellular Fe²⁺and LPO levels.

ObjectiveTo investigate the influencing factors for hepatic hydrothorax （HH） before intervention for primary hepatic carcinoma （PHC）， and to construct and assess the nomogram risk prediction model. MethodsA retrospective analysis was performed for the clinical data of 353 hospitalized patients who attended the Third People’s Hospital of Kunming for the first time from October 2012 to October 2021 and there diagnosed with PHC， and according to the presence or absence of HH， they were divided into HH group with 153 patients and non-HH group with 200 patients. General data and the data of initial clinical testing after admission were collected from all PHC patients. The independent-samples t test was used for comparison of normally distributed continuous data between two groups， and the Mann-Whitney U test was used for comparison of non-normally distributed continuous data between two groups； the chi-square test or the Fisher’s exact test was used for comparison of categorical data between groups. After the multicollinearity test was performed for the variables with statistical significance determined by the univariate analysis， the multivariate Logistic regression analysis was used to identify independent influencing factors. The “rms” software package was used to construct a nomogram risk prediction model， and the Hosmer-Lemeshow test and the receiver operating characteristic （ROC） curve were used to assess the risk prediction model； the “Calibration Curves” software package was used to plot the calibration curve， and the “rmda” software package was used to plot the clinical decision curve and the clinical impact curve. ResultsAmong the 353 patients with PHC， there were 153 patients with HH， with a prevalence rate of 43.34%. Child-Pugh class B （odds ratio ［OR］=2.652， 95% confidence interval ［CI］： 1.050 — 6.698， P=0.039）， Child-Pugh class C （OR=7.963， 95%CI： 1.046‍ ‍—‍ ‍60.632， P=0.045）， total protein （OR=0.947， 95%CI： 0.914‍ ‍—‍ ‍0.981， P=0.003）， high-sensitivity C-reactive protein （OR=1.007， 95%CI： 1.001‍ ‍—‍ ‍1.014， P=0.025）， and interleukin-2 （OR=0.801， 95%CI： 0.653‍ ‍—‍ ‍0.981， P=0.032） were independent influencing factors for HH before PHC intervention， and a nomogram risk prediction model was established based on these factors. The Hosmer-Lemeshow test showed that the model had a good degree of fitting （χ²=5.006， P=0.757）， with an area under the ROC curve of 0.752 （95%CI： 0.701‍ ‍—‍ ‍0.803）， a sensitivity of 78.40%， and a specificity of 63.50%. The calibration curve showed that the model had good consistency in predicting HH before PHC intervention， and the clinical decision curve and the clinical impact curve showed that the model had good clinical practicability within a certain threshold range. ConclusionChild-Pugh class， total protein， interleukin-2， and high-sensitivity C-reactive protein are independent influencing factors for developing HH before PHC intervention， and the nomogram model established based on these factors can effectively predict the risk of developing HH.

ObjectiveTo elucidate the critical role of rehabilitation medical records (including electronic records) in rehabilitation medicine's clinical practice and management, comprehensively analyzed the structure, core content and data standards of rehabilitation medical records, to develop a standardized medical record data architecture and core dataset suitable for rehabilitation medicine and to explore the application of rehabilitation data in performance evaluation and payment. MethodsBased on the regulatory documents Basic Specifications for Medical Record Writing and Basic Specifications for Electronic Medical Records (Trial) issued by National Health Commission of China, and referencing the World Health Organization (WHO) Family of International Classifications (WHO-FICs) classifications, International Classification of Diseases (ICD-10/ICD-11), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), this study constructed the data architecture, core content and data standards for rehabilitation medical records. Furthermore, it explored the application of rehabilitation record summary sheets (home page) data in rehabilitation medical statistics and payment methods, including Diagnosis-related Groups (DRG), Diagnosis-Intervention Packet (DIP) and Case Mix Index. ResultsThis study proposed a systematic standard framework for rehabilitation medical records, covering key components such as patient demographics, rehabilitation diagnosis, functional assessment, rehabilitation treatment prescriptions, progress evaluations and discharge summaries. The research analyzed the systematic application methods and data standards of ICD-10/ICD-11, ICF and ICHI Beta-3 in the fields of medical record terminology, coding and assessment. Constructing a standardized data structure and data standards for rehabilitation medical records can significantly improve the quality of data reporting based on the medical record summary sheet, thereby enhancing the quality control of rehabilitation services, effectively supporting the optimization of rehabilitation medical insurance payment mechanisms, and contributing to the establishment of rehabilitation medical performance evaluation and payment based on DRG and DIP. ConclusionStructured rehabilitation records and data standardization are crucial tools for quality control in rehabilitation. Systematically applying the three reference classifications of the WHO-FICs, and aligning with national medical record and electronic health record specifications, facilitate the development of a standardized rehabilitation record architecture and core dataset. Standardizing rehabilitation care pathways based on the ICF methodology, and developing ICF- and ICD-11-based rehabilitation assessment tools, auxiliary diagnostic and therapeutic systems, and supporting terminology and coding systems, can effectively enhance the quality of rehabilitation records and enable interoperability and sharing of rehabilitation data with other medical data, ultimately improving the quality and safety of rehabilitation services.

ObjectiveTo explore the data standard system of electronic medical records in the field of rehabilitation, focusing on the terminology and coding standards, data structure, and key content categories of rehabilitation electronic medical records. MethodsBased on the Administrative Norms for the Application of Electronic Medical Records issued by the National Health Commission of China, the electronic medical record standard architecture issued by the International Organization for Standardization and Health Level Seven (HL7), the framework of the World Health Organization Family of International Classifications (WHO-FICs), Basic Architecture and Data Standards of Electronic Medical Records, Basic Data Set of Electronic Medical Records, and Specifications for Sharing Documents of Electronic Medical Records, the study constructed and organized the data structure, content, and data standards of rehabilitation electronic medical records. ResultsThe data structure of rehabilitation electronic medical records should strictly follow the structure of electronic medical records, including four levels (clinical document, document section, data set and data element) and four major content areas (basic information, diagnostic information, intervention information and cost information). Rehabilitation electronic medical records further integrated information related to rehabilitation needs and characteristics, emphasizing rehabilitation treatment, into clinical information. By fully applying the WHO-FICs reference classifications, rehabilitation electronic medical records could establish a standardized framework, diagnostic criteria, functional description tools, coding tools and terminology index tools for the coding, indexing, functional description, and analysis and interpretation of diseases and health problems. The study elaborated on the data structure and content categories of rehabilitation electronic medical records in four major categories, refined the granularity of reporting rehabilitation content in electronic medical records, and provided detailed data reporting guidance for rehabilitation electronic medical records. ConclusionThe standardization of rehabilitation electronic medical records is significant for improving the quality of rehabilitation medical services and promoting the rehabilitation process of patients. The development of rehabilitation electronic medical records must be based on the national and international standards. Under the general electronic medical records data structure and standards, a rehabilitation electronic medical records data system should be constructed which incorporates core data such as disease diagnosis, functional description and assessment, and rehabilitation interventions. The standardized rehabilitation electronic medical records scheme constructed in this study can support the improvement of standardization of rehabilitation electronic medical records data information.

ObjectiveTo analyze the data structure and standards of rehabilitation outpatient medical records, to provide data support for improving the quality of rehabilitation outpatient care and developing medical insurance payment policies. MethodsBased on the normative documents issued by the National Health Commission, Basic Standards for Medical Record Writing and Standards for Electronic Medical Record Sharing Documents, in accordance with the Quality Management Regulations for Outpatient (Emergency) Diagnosis and Treatment Information Pages (Trial), reference to the framework of the World Health Organization Family of International Classifications (WHO-FICs), the data framework and content of rehabilitation outpatient medical records were determined, and the data standards were discussed. ResultsThis study constructed a data framework for rehabilitation outpatient medical records, including four main components: patient basic information, visit process information, diagnosis and treatment information, and cost information. Three major reference classifications of WHO-FICs, International Classification of Diseases, International Classification of Functioning, Disability and Health, and International Classification of Health Interventions,were used to establish diagnostic standards and standardized terminology, as well as coding disease diagnosis, functional description, functional assessment, and rehabilitation interventions, to improve the quality of data reporting, and level of quality control in rehabilitation. ConclusionThe structuring and standardization of rehabilitation outpatient medical records are the foundation for sharing of rehabilitation data. The using of the three major classifications of WHO-FICs is valuable for the terminology and coding of disease diagnosis, functional description and assessment, and intervention in rehabilitation outpatient medical records, which is significant for sharing and interconnectivity of rehabilitation outpatient data, as well as for optimizing the quality and safety of rehabilitation medical services.

ObjectiveTo explore the standardization of inpatient rehabilitation medical record summary sheet, encompassing its structure, content and data standards, to enhance the standardization level of inpatient rehabilitation medical record summary sheet, improve data reporting quality, and provide accurate data support for medical insurance payment, hospital performance evaluation, and rehabilitation discipline evaluation. MethodsBased on the relevant specifications of the National Health Commission's Basic Norms for Medical Record Writing, Specifications for Sharing Documents of Electronic Medical Records, and Quality Management and Control Indicators for Inpatient Medical Record Summary Sheet (2016 Edition), this study analyzed the structure and content of the inpatient rehabilitation medical record summary sheet. The study systematically applied the three major reference classifications of the World Health Organization Family of International Classifications, International Classification of Diseases (ICD-10/ICD-11, ICD-9-CM-3), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), for disease diagnosis, functional description and assessment, and rehabilitation intervention, forming a standardized terminology system and coding methods. ResultsThe inpatient rehabilitation medical record summary sheet covered four major sections: inpatient information, hospitalization information, diagnosis and treatment information, and cost information. ICD-10/ICD-11 were the standards and coding tools for admission and discharge diagnoses in the inpatient rehabilitation medical record summary sheet. The three functional assessment tools recommended by ICD-11, the 36-item version of World Health Organization Disability Assessment Schedule 2.0, Brief Model Disability Survey and Generic Functioning domains, as well as ICF, were used for rehabilitation functioning assessment and the coding of outcomes. ICHI Beta-3 and ICD-9-CM-3 were used for coding surgical procedures and operations in the medical record summary sheet, and also for coding rehabilitation intervention items. ConclusionThe inpatient rehabilitation medical record summary sheet is a summary of the relevant content of the rehabilitation medical record and a tool for reporting inpatient rehabilitation data. It needs to be refined and optimized according to the characteristics of rehabilitation, with necessary data supplemented. The application of ICD-11/ICD-10, ICF and ICHI Beta-3/ICD-9-CM-3 classification standards would comprehensively promote the accuracy of inpatient diagnosis of diseases and functions. Based on ICD-11 and ICF, relevant functional assessment result data would be added, and ICHI Beta-3/ICD-9-CM-3 should be used to code rehabilitation interventions. Improving the quality of rehabilitation medical records and inpatient rehabilitation medical record summary sheet is an important part of rehabilitation quality control, and also lays an evidence-based data foundation for the analysis and application of inpatient rehabilitation medical record summary sheet.