ObjectiveTo investigate the effect of different cyclic strengths on expressions of phospholipase A2 (PLA2) and cyclooxygenase (COX) in human tenocytes.MethodsHuman tenocytes were uniaxially stretched with different stretching intensity (4％, 8％ and 12％) under 0.5 Hz for four hours.Non-stretched tenocytes were applied to the control group.The expressions of cytosolic PLA2(cPLA2), COX1 and COX2 were measured by Western blot and RT-PCR.The secretion of secretory PLA2 (sPLA2) was measured by ELISA.Results The mRNA expressions of cPLA2, COX1 and COX2 in control group, 4％, 8％ and 12％ stretch groups showed an increase trend.But protein expressions of cPLA2 and COX1 in 4％ stretch group were increased insignificantly compared with the control group (P ＞ 0.05).Protein expressions of cPLA2 and COX1 in 8％ and 12％ stretch groups were increased more significantly compared with the control group (P ＜ 0.01).The COX2 expression in 4％,8％ and 12％ stretch groups showed statistical difference compared with that in the control group (P ＜0.01) and the difference increased with stretch intensity.There was no different expression of sPLA2 between 4％ stretch group and control group (P = 0.260).However, expression of sPLA2 was increased markedly in 8％ and 12％ stretch groups (P ＜ 0.01).ConclusionsThe expressions of human tendnocytes PLA2, COX1 and COX2 in vitro are positively correlated with stretch intensity.PLA2/COX system may be a new molecule target in clinical treatment of tendinopathy.

Objective:To analyze the clinical characteristics and SLC25A13 gene mutation in children with neonatal intrahepatic cholestasis caused by citrin deficiency(NICCD).Methods:The data of 18 children diagnosed with NICCD in Xi′an Children′s Hospital from January 2014 to December 2018 were collected.The clinical manifestations, biochemical characteristics, SLC25A13 gene mutation and prognosis were analyzed.Results:All the 18 cases of NICCD were from North China and the age of initial diagnosis averaged(63.4±19.5)days.The clinical manifestations included jaundice(100%), light yellow or white stool(38.9%), growth retardation(27.8%)and so on.All patients had cholestasis.Of 18 cases, the levels of glutamyltranspeptidase, total bile acid and alpha fetoprotein were all increased, and serum albumin was decreased.Elevated aspartate aminotransferase(94.4%), elevated glutamic pyruvic transaminase(72.2%), prolonged prothrombin time(88.9%), hyperlactemia(83.3%), hypoglycemia(77.8%), anemia(66.7%)and other biochemical abnormalities were observed.Citrulline and other serum amino acids of all cases were elevated in blood samples by tandem mass spectrometry.The increase of 4-hydroxyphenyllactate and 4-hydroxyphenylpyruvate was found in 70%(7/10)urine samples by gas chromatography.Age was negatively correlated with total bile acid( r=-0.469, P=0.049), and positively correlated with blood ammonia, threonine, methionine, ornithine and tyrosine( r=0.472, 0.690, 0.698, 0.678 and 0.769, respectively, P<0.05). A total of 16 SLC25A13 gene mutations were detected, of them c. 851_854del(33.3%)and c. 1638_1660dup(19.4%)were the most common.c.1841+ 3_1841+ 4del, c.980_981del(p.E327Vfs*45)and c. 602A>T(p.E201V)were novel mutations.Among the 17 children who were followed up, 1 case died and 16 cases had normal biochemical parameters within 1 year. Conclusion:The characteristic biochemical changes are helpful for early recognition of NICCD.The prognosis of NICCD is good if the treatment is appropriate and timely.c.851_854del and c. 1638_1660dup are high-frequency mutations of SLC25A13 gene in north China.

Objective To explore the characteristics of intestinal Microbiota in T2DM patients by two molecular fingerprint technologies,and investigate the correlation of intestinal microbiota and T2DM,and evaluate the application value of two fin-gerprint technologies.Methods Fecal samples of 8 healthy groups and 7 diabetes patients were collected.Then the total DNA of gut microbiota was extracted.Through the analysis of products by two molecular fingerprints of ERIC-PCR and DGGE-PCR,ecological characteristics of diversity and similarity of gut microbiota were obtained in healthy groups and dia-betes patients.Results Compared to healthy groups,the number of bands and Shannon-Wiener index of gut microbiota in di-abetes patients was decreased but no statistical significance.The similarity in patients group was declining(P <0.05),and the construction of gut microbiota was inclined to differ.Two fingerprint technologies of ERIC and DGGE could directly re-flect the diversity of gut microbiota and were the modern molecular biological techniques without depending on cultivation. ERIC was simple and convenient,had a better reflection of microbial diversity,but gel band cutting and regarded asa proper approach with higher diffraction efficiency and excellent repetition to studysequencing couldn’t be performed since there were more influencing factors on the experiment.DGGE could better reflect the ecological characteristics such as microbial diversity and similarity,and selecting bands,gel band cutting and sequencing could be done.Conclusion The composition and construction of gut microbiota in diabetes patients were changed,which suggests the occurrence of the disease had the correlation with gut microbiota.ERIC and DGGE is regarded as a proper approach with higher diffraction efficiency and ex-cellent repetition to study intestinal microbiota,but also gel band cutting,sequencing,bacteria identification can be performed by DGGE,both can be used in combination.

Objective:To explore the advantages of the novel individualized 3D printing artificial vertebral body in spine reconstruction and to evaluate its clinical effect.Methods:From January 2017 to December 2018, the 15 patients who underwent total vertebrectomy and spine reconstruction with individualized 3D printing artificial vertebral body were analyzed retrospectively. There were 8 males and 7 females, with the mean age 39.5 years (range: 20-57), including 12 primary tumors and 3 metastatic tumors. According to tumor location and surrounding soft tissue invasion range, simple posterior or combined anterior and posterior approach were used for total vertebral resection, and the defection was reconstructed by 3D printing artificial vertebral body. The operation time, intraoperative bleeding volume, postoperative stability of artificial vertebral body and bone ingrowth of adjacent vertebral body, preoperative and postoperative neurological changes, preoperative and postoperative VAS score, local control and survival of patients were analyzed.Results:The mean operation time was 412.0 min (range: 135-740 min), and the mean blood loss was 4 140.0ml (range: 100-14 000 ml). The mean follow-up time was 23.2 months (range: 12-35 months), and no one loss to follow-up. One case had pleural rupture, one case had cerebrospinal fluid leakage and one case had L5 nerve root palsy. All patients recovered after active symptomatic treatment. Compare with the preoperative VAS score (4.7±1.1), the differences of VAS score at 7 d postoperative and last follow-up (1.6±0.6 and 1.0±0.5) were significantly reduced ( P<0.001). Three patients with Frankel grade C gradually recovered to grade D, and no change were found in grade D and Grade E patients, there was no significant improved at last follow-up. Preliminary bone growth was found between the artificial vertebral body and the adjacent vertebral body 3 months after operation. The bone growth was more obvious at 12 months post-operation, and the artificial vertebral body fused with the adjacent vertebral bodies to form bone integration. At 24 months post-operation, the integration of the artificial vertebral body was more accurate. During the follow-up period, there was no loosening or displacement of the artificial vertebral body and no failure of internal fixation. A case of hemangioendothelioma and a case of epithelioid angiosarcoma died at 33 months and 35 months postoperatively. One patient with chondrosarcoma had local recurrence at16 months post-operation. After treated with arotinib, the tumor did not progress. The other 12 patients had no tumor recurrence or distant metastasis. Conclusion:After spinal tumor resection, individualized 3D printing artificial vertebral body can be used to accurate restoration of spinal continuity, and provide nice interface matching and bone growth between artificial vertebral body and the adjacent vertebral endplates. Moreover, the immediate and long-term stability of the artificial vertebral body can meet the needs of spinal reconstruction.

Objective:To investigate the effect of smart air cell mattresses on sleep quality.Methods:Twenty healthy young people were enrolled as subjects, and each subject underwent a four-night polysomnographic monitoring experiment, including two nights each on a smart air cell mattress and a general mattress. The differences in sleep quality were compared by self-assessment of sleep quality, objective sleep indicators, and electroencephalogram (EEG) spectral analysis.Results:In the comparison between the smart air cell mattress and the general mattress, the differences in self-assessment of sleep quality and objective sleep indicators were not statistically significant (all P > 0.05), but the smart air cell mattress had a slight overall advantage. The relative power of EEG in the low-frequency band and the relative power of EEG in the high-frequency band were higher in the subjects with the smart air cell mattress. Conclusions:For the healthy young population, the smart air cell mattress can positively influence sleep quality to some extent, and the change in EEG relative power indicates an increase in sleep depth.

Objective:To evaluate the short-term efficacy and safety of 3D printing patient-matched artificial vertebral body in clinical research and application.Methods:A total of 12 patients with spinal tumors were enrolled 7 males (58.33%) and 5 females (41.67%), aged from 18 to 65 years old in The First Affiliated Hospital of Air Force military Medical University (hereinafter referred to as Xijing Hospital) and Peking University people's Hospital from September 2021 to July 2022. The spinal vertebra defect were restored by using 3D printing patient-matched artificial vertebral body after tumor resection. All patients who accepted TES and 3D printing patient-matched artificial vertebral body implantation were included according to the inclusion and exclusion criteria. The bone interface fusion was evaluated by the imaging fusion criteria of Brantigan and Steffee at 3 and 6 months after operation, the curative effect was evaluated by comparing Japanese Orthopaedic Association (JOA) score at 3 and 6 months after operation, visual analogue scale (VAS) 3 months after operation and intervertebral height at 3 and 6 months after operation with those before operation, and the safety was evaluated by adverse event recording.Results:All 12 patients completed the operation successfully, and the operation sites were thoracic vertebrae in 6 cases (50%), thoracolumbar in 3 cases (25%) and lumbar vertebrae in 3 cases (25%). All patients were followed up. The mean follow-up time was 23.92±3.23 months (range, 19-29 months). No tumor recurrence or metastasis was observed during this period. All patients were followed up at 15 days, 3 months and 6 months after operation. During the 6-month follow-up, X ray results showed that interface of bone and the vertebral body were fused in all of the 12 patients, and the effective rate of fusion was 100%. The 95% confidence interval is calculated to be (75.6%-100%). Six months after operation, the improvement rate of JOA score was excellent in 10 cases, good in 1 case, poor in 1 case, and the excellent and good rate was 91.66%. The preoperative VAS score was 4.08 ±2.47, and during the 3-month follow-up, the VAS score was improved to 1.83 ±1.59. Compared with the preoperative VAS score, the difference was statistically significant ( t=2.635, P=0.023). The intervertebral height before operation, 15 days after operation, 3 months after operation and 6 months after operation were 32.75 (25.94, 68.20), 41.09 (30.55, 70.20), 40.70 (30.23, 67.83) and 40.74 (30.23, 67.08), respectively, and there was no statistically significant difference (χ 2=0.768, P=0.857). No implant-related adverse events occurred after operation. Conclusion:The 3D printing patient-matched artificial vertebral body used in this study has satisfactory short-term efficacy and safety in the reconstruction of spinal stability after spinal tumor resection.

Gastrointestinal tumors have been widely concerned because of increasing morbidity and mortality. In the process of exploring the therapeutic patterns of gastrointestinal tumors, patients treated with neoadjuvant therapies have good effect of tumor regression and favorable prognosis. Thus, neoadjuvant therapy strategies are recommended by major guidelines of gastrointestinal tumors in the world. Meanwhile, they have a great impact on the traditional methods of surgery, the influence mainly involves the reduction of the surgical margin and the scope of lymph node dissection in gastric cancer, while involves performing organ preservation and watch & wait in selective patients with colorectal cancer. These effects and changes were based on effective control of local recurrence by neoadjuvant therapies, and the advantages of neoadjuvant therapy in terms of tumor regression and survival supported by many studies. It is also based on the patient's desire for organ preservation and non-surgical treatment. Meanwhile, application of neoadjuvant therapy strategies increase surgical difficulty and postoperative complications, but the overall impact on patient prognosis is weak. Therefore, the selection of an appropriate treatment model after neoadjuvant therapy requires an effective overall post-treatment evaluation. In particular, it is necessary to pay attention to the evaluation of imaging, endoscopy, etc., while effectively performing monitoring and follow-up, and finally establishing an appropriate salvage treatment. This article will review the status and problems of individualized treatment after neoadjuvant therapy of gastrointestinal tumor.

Gastrointestinal tumors have been widely concerned because of increasing morbidity and mortality. In the process of exploring the therapeutic patterns of gastrointestinal tumors, patients treated with neoadjuvant therapies have good effect of tumor regression and favorable prognosis. Thus, neoadjuvant therapy strategies are recommended by major guidelines of gastrointestinal tumors in the world. Meanwhile, they have a great impact on the traditional methods of surgery, the influence mainly involves the reduction of the surgical margin and the scope of lymph node dissection in gastric cancer, while involves performing organ preservation and watch & wait in selective patients with colorectal cancer. These effects and changes were based on effective control of local recurrence by neoadjuvant therapies, and the advantages of neoadjuvant therapy in terms of tumor regression and survival supported by many studies. It is also based on the patient's desire for organ preservation and non-surgical treatment. Meanwhile, application of neoadjuvant therapy strategies increase surgical difficulty and postoperative complications, but the overall impact on patient prognosis is weak. Therefore, the selection of an appropriate treatment model after neoadjuvant therapy requires an effective overall post-treatment evaluation. In particular, it is necessary to pay attention to the evaluation of imaging, endoscopy, etc., while effectively performing monitoring and follow-up, and finally establishing an appropriate salvage treatment. This article will review the status and problems of individualized treatment after neoadjuvant therapy of gastrointestinal tumor.

Background and Aims:Preventive temporary stoma has been widely used in surgeries for rectal cancer as a simple and effective method to reduce the severity of postoperative anastomotic leakage.However,some patients with preventive temporary stomas cannot undergo reversal due to various factors,resulting in a permanent stoma.Permanent stomas remain a common adverse outcome in clinical practice,and the reasons behind this are not entirely clear.This study analyzes a continuous surgical sample from a single center to explore the risk factors for forming permanent stoma. Methods:The clinical data of patients who underwent anal-preserving rectal cancer surgery with preventive temporary stoma in Gastrointestinal Cancer Center Ⅲ of Peking University Cancer Hospital from January 2020 to March 2023,with over 12 months of follow-up,were retrospectively collected.The occurrence of permanent stoma was analyzed,and the clinical variables of patients with permanent stoma were compared to those who underwent stoma reversal,along with an analysis of the risk factors for permanent stoma formation.Permanent stoma was defined as ostomy reversal failure for more than 12 months. Results:A total of 299 patients were included,among which 268(89.63％)underwent stoma reversal(stoma closure group),and 31(10.37％)did not(permanent stoma group).Compared to the stoma closure group,the permanent stoma group had a higher incidence of distant organ metastasis at diagnosis(7.5％vs.25.85％,P=0.003)and also had higher proportions of T3 and T4 stages,N2 stage,and clinical stage Ⅳ(all P＜0.05)with an elevated overall postoperative complication rate(19.0％vs.41.9％,P=0.003)as well as a higher rate of severe complications(1.1％vs.9.7％,P=0.016)and an increased incidence of anastomotic leakage(4.9％vs.19.4％,P=0.006).Logistic regression analysis revealed that the presence of distant organ metastasis at diagnosis(OR=5.41,95％CI=1.80-16.27,P=0.003),and occurrence of anastomotic leakage(OR=4.44,95％CI=1.15-17.09,P=0.030)were independent risk factors for the formation of permanent stomas. Conclusion:At present,some patients still cannot undergo reversal of their preventive temporary stoma,resulting in permanent stoma.The formation of permanent stomas is closely related to a low tumor location,distant organ metastasis at diagnosis,and the occurrence of anastomotic leakage.

Objective To compare the effects between the dual-cycle intensive training mode (DCITM) of "teaching-in vitro-in vivo-summary-in vitro-in vivo-assessment" and the single-cycle basic training mode (BTM) of "teaching-in vitro-tn vivo-assessment" on training graduate students majoring in cardiovascular surgery.Methods Eight graduate students majoring in cardiovascular surgery received the basic training of coronary artery bypass vascular anastomosis under the mode of BTM or DCITM.Then the training effects were evaluated by scoring of experts.Besides,SPSS 17.0 statistical software was used to analyze the evaluation results.Results Compared with students who received BTM,the postgraduates trained by DCITM became more skilled in vascular anastomosis.In vitro,the average number of anastomosis completed by trainee increased significantly [(2.0 ± 1.0) vs.(5.0 ± 1.5),P＜0.05] over a specified period of time,the vascular leakage rate was significantly reduced [(92 ± 5)％ vs.(30 ± 2)％,P＜0.05],and the average time per anastomosis was significantly shorter [in vitro:(20.1 ± 2.5) min vs.(12.6 ± 3.3) min,P＜0.05].There was also a statistically significant difference in the average time of each anastomosis in miniature pigs with coronary vascular anastomosis [in vivo:(30 ± 2) min vs.(21 ± 3) min,P＜0.05].Conclusion Taken into together,DCITM is a highly efficient mode for promoting the quality of cardiovascular-surgery-teaching and enhancing the effectiveness of training in clinical surgical skills.