Objective To evaluate the accuracy of dose-length product (DLP) values in CT dose reports by comparing them with the DLP values measured using a pencil-type ionization chamber. Methods Experiments were conducted using four CT scanners with different detector row numbers from two manufacturers (A and B), along with a head phantom and a pencil-type ionization chamber. Other scanning parameters were fixed, while pairwise combinations of kV and mAs were tested. The DLP values were measured under various scanning conditions using the pencil-type ionization chamber (DLP_measured) and the corresponding DLP values in CT dose reports were recorded (DLP_reported). All data were subjected to statistical analysis. Results Differences were observed between DLP_reported and DLP_measured values. The smallest mean absolute value of ΔDLP was approximately 2.526 mGy·cm observed on the 40-row CT scanner of manufacturer A. There was a difference between the ΔDLPs of the four CT scanners. Both DLP_reported and DLP_measured exhibited a linear relationship with mAs. Conclusion The percentage errors between DLP_reported and DLP_measured values for all four CT scanners were within the national standard tolerance of 15%. DLP values in CT dose reports can serve as a reference for assessing patient radiation dose during scanning. However, for radiation dose-related research, data measured using dosimetric instruments such as pencil-type ionization chamber are recommended.