Computer selective courses in medical colleges based on C language are facing many problems. First, C language lacks continuity with follow-up courses and well combines with professional courses, which result in loss of interest of students and few students would like choose this selective course. Second, the computer selective courses are miscellaneous and discontinuous, which occupies much time and therefore necessitate integration and optimization. The reformations and implementation schemes are proposed to optimize computer selective courses based on Java language. On the one land, different computer selective courses are optimized, credit hours are compressed, and selective interests of the students are improved. In addition, the practicability and scalability of computer selective courses are enhanced combining the characteristics of medical science specialty.

Objective To explore a method to separate and purify apolipoprotein Ⅰ from human serum conveniently and efficiently. Methods Apolipoprotein Ⅰ was separated and pufified by ultracentrifugation and affinity chromatography. Then the purified apolipoprotein Ⅰ was analyzed by SDS-polyacrylamide gel electrophoresis and agar gel double immunodiffusion test. Results The purified apolipoprotein Ⅰ was satisfactory. Conclusion This method had good reliability and was convenient and economical.

Magnesium stents have gained increasing interest as an ideal stent of future intervention. In order to study the deformation behavior of magnesium alloy stents in the interventional treatment, the finite element method was used to analysis the effects of different crimp and expansion dimensions on the mechanical properties (maximum stress, radial recoil rate, longitudinal shortening rate and radial strength). The results showed that crimping and expanding have a minimal influence on the stent radial strength. When the expansion size is same, the maximum equivalent stress and recoil rate decrease with the crimp size. When the crimp size is same, in contrast with the radial recoil rate, the maximum equivalent stress and longitudinal shortening rate increase with the expansion size. In addition the paper verified the radial strength-radial displacement curve obtained by FEM. Results are basically consistent, indicating the finite element method can efficiently provide researchers with reliable, high-quality design.
Alloys ; Finite Element Analysis ; Magnesium ; Stents

The finite element method was used for simulating the mechanical performance and fatigue safety of three different structures of Nitinol stent. According to the actual situation, after proposing reasonable assumptions and simplification, the geometry model and finite element model establishment, material mode selection and boundary condition setting are completed. The strain and fatigue life of different stent edges wide (omega) or strut angle (theta) are computed. The result can provide a valuable reference for the optimal design of stent.
Alloys ; Finite Element Analysis ; Prosthesis Design ; Stents

Objective:To explore the effect of artificial dermis combined with autogenous thin skin graft on the survival rate of compound skin graft and the scar state of joints in burn patients.Methods:94 burned patients treated in Baoding Fifth Hospital from August 2017 to August 2019 were prospectively selected as the research objects. They were randomly divided into two groups with 47 cases in each group. The control group was treated with simple medium thick skin transplantation, and the observation group was treated with artificial dermis combined with autologous thin skin grafting. The recovery of the two groups (healing time of skin donor area, healing time of skin graft area, healing time under scab of burn area and hospitalization time) were compared. The survival rate of composite skin transplantation, wound healing, Vancouver Scar Scale (VSS) score, joint range of motion (shoulder abduction, knee flexion, knee extension), Burn Specific Health Scale-Brief (BSHS-B), Profile of Mood States-Short Form (POMS-SF) score and complications were compared.Results:The healing time of donor area, skin graft area, subeschar healing time and hospital stay in the observation group were shorter than those in the control group ( P<0.05). The wound healing in the observation group was better than that in the control group, and the survival rate of composite skin transplantation was higher than that in the control group ( P<0.05). After treatment, the scar state of the joint in the two groups was improved compared with that before treatment ( P<0.05); The scar thickness, vascular distribution score and total score of VSS in the observation group were lower than those in the control group ( P<0.05). After treatment, the joint range of motion in the two groups was improved compared with that before treatment ( P<0.05); The shoulder abduction, knee flexion and knee extension in the observation group were higher than those in the control group ( P<0.05). After treatment, the quality of life and psychological status of the two groups were improved compared with those before treatment ( P<0.05); The BSHS-B score of the observation group was higher than that of the control group, and the POMS-SF score was lower than that of the control group ( P<0.05); The incidence of complications in the observation group (4.26%) was lower than that in the control group (21.28%) ( P<0.05). Conclusions:Artificial dermis combined with autologous thin skin graft can significantly improve the survival rate of compound skin graft in burned patients, and can further reduce the scar condition of the joints of patients, reduce the incidence of complications, and effectively improve the prognosis of patients.

OBJECTIVE:To observe therapeutic efficacy and safety of entecavir combined with long-acting interferon in the treatment of HBeAg positive chronic hepatitis B (CHB).METHODS:A total of 140 patients with HBeAg positive CHB selected from our hospital during May 2013-May 2015 were divided into observation group and control group according to random number table,with 70 cases in each group.Both groups received routine liver-protecting treatment;control group was additionally given Peginterferon α-2b injection 80 μg subcutaneously,once a week;observation group was additionally given Entecavir dispersible tablets 0.5 mg,po,qd,on the basis of control group.Both groups received treatment for consecutive 50 weeks.Clinical efficacies,liver function indexes before and after treatment,virological efficacies and the occurrence of ADR of 2 groups were observed.RESULTS:Each 5 cases withdrew from the study in 2 groups,and 130 cases (65 cases in each group) completed the study.Total response rate of observation group was 90.8％,which was significantly higher than 76.9％ of control group,with statistical significance (P＜0.05).Before treatment,there was no statistical significance in the levels of ALT,AST,ALB or TBIL between 2 groups (P＞0.05).After treatment,the levels of ALT,AST and TBIL in 2 groups were decreased significantly,while ALB level was increased significantly,the observation group was significantly better than the control group,with statistical significance (P＜0.05).After 50 weeks of treatment,the negative conversion rate of HBV-DNA,HBeAg serology conversion rate and ALT normalizing rate of observation group were significantly higher than those of control group,and virologic breakthrough rate was significantly lower than control group,with statistical significance (P＜0.05).No severe ADR was found in 2 groups.There was no statistical significance in the incidence of ADR (P＞0.05).CONCLUSIONS:The entecavir combined with long-acting interferon show defmite therapeutic efficacy for HBeAg positive CHB,inhibit the replication of HBV and improve liver function of patients with good safety.

The finite element method was used for simulating the mechanical performance and fatigue safety of three different structures of Nitinol stent. According to the actual situation, after proposing reasonable assumptions and simplification, the geometry model and finite element model establishment, material mode selection and boundary condition setting are completed. The strain and fatigue life of different stent edges wide (ω) or strut angle (q) are computed. The result can provide a valuable reference for the optimal design of stent.

Nowadays, the new healthcare industry is closely integrated with the new-generation information techniques such as mobile Internet, Internet of things, cloud computing, and big data, which proposes higher requirements for the teaching objectives and contents of the optional course of medical informatics for non-informatics students in medical colleges and universities. Based on the actual teaching demands and the training objectives of clinical medical students, the teaching contents of the optional course of medical informatics were scientifically optimized and allocated. With "small datasets and basic application of electronic medical records/electronic health records" in medical informatics education as the main contents, numeric data, text data, and image data were modularized in medical information processing, and the methods of flipped classroom and case-driven teaching were adopted. The commonly used methods in machine learning (such as regression, classification, and clustering methods) were introduced and applied in task-based case studies, and the comprehensive algorithm case report was used for course assessment and evaluation. The teaching practice has shown that the above exploration not only stimulated the interest in the optional course of medical informatics among students, but also effectively implemented the "five early" mode of early prediction, early adjustment, early identification, early diagnosis, and early treatment among medical students.

Objective:To investigate the dosimetry advantage of 3D-printed minimally invasive guided template used in local advanced cervical cancer intracavitary combined with interstitial radiotherapy.Methods:A total of 68 cases with locally advanced cervical cancer who were admitted to Hebei Cangzhou Hospital of intergrated traditional Chinese medicine and western medicine from May 2016 to August 2019 were selected. All the patients had eccentric tumor or large tumor (tumor diameter >5 cm) after radiotherapy. Intensity modulated radiotherapy was used for external radiotherapy, and intracavitary combined with interstitial radiotherapy was used for brachytherapy. The prescription dose of high-risk clinical target volume (HR-CTV) is 6 Gy/fraction, once a week, five fractions in total. Sixty-eight patients were randomly divided into two groups, 35 cases in the template group who received minimally invasive 3D printing guided template assisted intrauterine tube implantation and insertion needle implantation, and 33 patients in the free implantation group who received free hand intrauterine tube implantation and insertion needle implantation. The position and depth of the insertion needle were adjusted by CT-guidance, and the final CT image was transmitted to the Oncentra Brachy treatment planning system, then the target volume and organs at risk were delineated for planning and treatment.Results:A total of 340 brchytherapy plans were made, including 175 in the template group and 165 in the free implantation group. The D90 values of the HR-CTV and intermediate-risk clinical target volume (IR-CTV) in the template group were increased ( t=3.63, 2.45, P<0.05), and D2 cm3 values (dose of 2 cm 3 of organ at risk) of bladder, rectum and sigmoid colon were significantly decreased ( t=-2.81, -2.54, -2.33, P<0.05). At the same time, the average CT scanning times of each treatment in the template group was (1.78±0.53) times, the average duration of each treatment was (11.35±3.98) min, and the average number of needles used in each implant treatment was (5.21±1.37). The result of free implantation group was higher than that of the template group. The differences were statistically significant ( t=-2.26, -4.53, -3.21, P<0.05). Conclusions:For localized advanced cervical cancer patients with eccentric or large tumors, the 3D printed minimally invasive guided template for intracavitary and interstitial implantation has obvious dosimetry advantages, and the operation is simpler and the duration is shorter.

Magnesium stents have gained increasing interest as an ideal stent of future intervention. In order to study the deformation behavior of magnesium al oy stents in the interventional treatment, the finite element method was used to analysis the effects of different crimp and expansion dimensions on the mechanical properties (maximum stress, radial recoil rate, longitudinal shortening rate and radial strength). The results showed that crimping and expanding have a minimal influence on the stent radial strength. When the expansion size is same, the maximum equivalent stress and recoil rate decrease with the crimp size. When the crimp size is same, in contrast with the radial recoil rate, the maximum equivalent stress and longitudinal shortening rate increase with the expansion size. In addition the paper verified the radial strength-radial displacement curve obtained by FEM. Results are basical y consistent, indicating the finite element method can efficiently provide researchers with reliable, high-quality design.