The COVID-19 epidemic has spread to the whole world for three years and has had a serious impact on human life, health and economic activities. China's epidemic prevention and control has gone through the following stages: emergency unconventional stage, emergency normalization stage, and the transitional stage from the emergency normalization to the "Category B infectious disease treated as Category B" normalization, and achieved a major and decisive victory. The designated hospitals for prevention and control of COVID-19 epidemic in Tianjin has successfully completed its tasks in all stages of epidemic prevention and control, and has accumulated valuable experience. This article summarizes the experience of constructing a hospital infection prevention and control system during the "Category B infectious disease treated as Category A" period in designated hospital. The experience is summarized as the "Cluster" hospital infection prevention and control system, namely "three rings" outside, middle and inside, "three districts" of green, orange and red, "three things" before, during and after the event, "two-day pre-purification" and "two-director system", and "one zone" management. In emergency situations, we adopt a simplified version of the cluster hospital infection prevention and control system. In emergency situations, a simplified version of the "Cluster" hospital infection prevention and control system can be adopted. This system has the following characteristics: firstly, the system emphasizes the characteristics of "cluster" and the overall management of key measures to avoid any shortcomings. The second, it emphasizes the transformation of infection control concepts to maximize the safety of medical services through infection control. The third, it emphasizes the optimization of the process. The prevention and control measures should be comprehensive and focused, while also preventing excessive use. The measures emphasize the use of the least resources to achieve the best infection control effect. The fourth, it emphasizes the quality control work of infection control, pays attention to the importance of the process, and advocates the concept of "system slimming, process fattening". Fifthly, it emphasizes that the future development depends on artificial intelligence, in order to improve the quality and efficiency of prevention and control to the greatest extent. Sixth, hospitals need to strengthen continuous training and retraining. We utilize diverse training methods, including artificial intelligence, to ensure that infection control policies and procedures are simple. We have established an evaluation and feedback mechanism to ensure that medical personnel are in an emergency state at all times.

Objective To analyze and study the prescriptions of Chief Physician Chang Yalin for treating breast hyperplasia patients in the outpatient department,explores and summarizes the medication patterns for treating breast hyperplasia,and provides reference and dialectical medication ideas for clinical treatment of breast hyperplasia by using data mining technology.Methods Collect the prescriptions of Dr.Chang Yalin for treating breast hyperplasia patients at the Outpatient Department of Jiuquan Traditional Chinese Medicine Hospital from January 1,2017 to December 31,2022.After induction and organization,establish a data table,use Excel 2019 to statistically analyze the drug frequency and gender,taste,and meridian.Use SPSS Modoler 18.0 software April algorithm to analyze the association rules of the drugs,and use SPSS Statistics for cluster analysis.Results A total of 184 prescriptions were included,covering 140 types of traditional Chinese medicine,with a total frequency of use of 4059 times.Among them,Cornus officinalis,dried ginger,roasted licorice,Poria cocos,and jujube are commonly used drugs for the treatment of breast hyperplasia.The top three types of Chinese medicine that are commonly used are tonifying deficiency,warming internal medicine,and relieving external symptoms.The medicinal properties are mainly warm and mild;The medicinal taste is characterized by sweetness,bitterness,and bitterness;The main meridians of drugs are spleen,lung,and heart meridians.Association rule analysis shows that roasted licorice white peony,poria cocos,licorice,and cornus flesh white peony,jujube,and ginger are equivalent.Classify commonly used drugs into 4 categories using Euclidean distance clustering and segmentation with 5.Conclusion Dr.Chang Yalin has always implemented the core idea of treating breast hyperplasia through the coordination of liver and spleen,the simultaneous application of attack and tonifying,and the simultaneous treatment of phlegm and blood stasis.In terms of the combination of latent drugs,the main focus is on tonifying qi and spleen,tonifying yin/blood and regulating liver,and resolving stasis/resolving phlegm and dispersing stagnation.In terms of the combination of"cold phlegm"and"blood stasis and toxin",as well as the combination of"eighteen contraindications"and"nineteen contraindications",his principles and methods are more distinctive and worthy of further research and promotion.

At present, China's traditional Chinese medicine(TCM) industry is developing rapidly with the support of modern science and technology. While promoting economic development and improving national health, it has brought multiple environmental problems. Under the "dual carbon" goals, the ecological fine manufacturing of TCM may become one of the breakthroughs for the TCM industry to practice low-carbon economy. From the perspective of low-carbon economy and considering the current situation of TCM pharmaceutical manufacturing, this paper analyzes the problems and shortcomings of the TCM pharmaceutical industry. In view of the key factors influencing the quality of TCM preparations under the ecological fine manufacturing mode, this paper proposes a practical and feasible selection plan for the ecological fine manufacturing mode of TCM, aiming to provide research ideas and a theoretical basis for the TCM industry in helping to achieve the goals of carbon peaking and carbon neutrality.
Drugs, Chinese Herbal/economics* ; Medicine, Chinese Traditional ; Carbon/analysis* ; China ; Drug Industry/economics*

Objective: Exploring the mediating effect of perceived social support between the maternal personality traits and pregnancy-related anxiety. Methods: Singleton pregnant women who underwent antenatal checkups in the obstetrics department of general hospital affiliated to Ningxia Medical University from July to December 2021 were enrolled in this study to investigate perceived social support, pregnancy-related anxiety and conscious personality traits. Pearson correlation analysis was used to analyze the association between the maternal personality traits, perceived social support, and pregnancy-related anxiety, and the mediating effect of perceived social support was analyzed using Bootstrap method. Results: A total of 1 259 subjects were included in the study, of which 170 (13.50%) pregnant women felt introverted. The total score of perceived social support was (46.37±8.38), and 31.45% of pregnant women had high perceived social support. The total score of pregnancy-related anxiety was (21.48±5.53). The score of worry about fetal health was (10.09±3.24), and 368 (29.23%) of pregnant women had pregnancy-related anxiety. Maternal personality traits and pregnancy-related anxiety were negatively correlated (r=-0.076, P<0.05) and positively correlated with perceived social support during pregnancy (r= 0.127, P<0.05). Perceived social support during pregnancy and pregnancy-related anxiety were negatively correlated (r=-0.236, P<0.05). Perceived social support partially mediated the relationship between the maternal personality traits and pregnancy-related anxiety, with a relative effect value of 37.50%. Conclusion: The maternal personality traits, level of perceived social support and pregnancy-related anxiety are all related. Perceived social support could mediate the relationship between the maternal personality traits and pregnancy-related anxiety.
Female ; Pregnancy ; Humans ; Anxiety ; Pregnant Women ; Personality ; Social Support ; Prenatal Care

OBJECTIVE: To observe the effects of moxibustion at Yongquan（KI 1） on the cognitive function and lower limb motor function in patients with post-stroke cognitive impairment of kidney essence deficiency. METHODS: Eighty-four patients with post-stroke cognitive impairment of kidney essence deficiency were randomly divided into an observation group（42 cases，1 case dropped off）and a control group（42 cases，1 case dropped off）.The control group was treated with medication，electroacupuncture，rehabilitation training and repetitive transcranial magnetic stimulation（rTMS）；on the basis of the treatment as the control group，moxibustion at bilateral Yongquan（KI 1）was adopted in the observation group.Both groups were treated once a day，5 days a week with 2-day interval，4 weeks were required. The Montreal cognitive assessment (MoCA) score, mini-mental state examination (MMSE) score, Fugl-Meyer assessment-lower extremity (FMA-LE) score, Berg balance scale (BBS) score, functional independence measure (FIM) score, modified fall efficacy scale (MFES) score and scale for the differentiation of syndromes of vascular dementia (SDSVD) score before and after treatment were observed in the two groups. RESULTS: After treatment，the MoCA, MMSE, FMA-LE, BBS, FIM and MFES scores were higher than those before treatment in both groups (P<0.05), and the scores in the observation group were higher than those in the control group (P<0.05). After treatment，the SDSVD scores were lower than those before treatment in both groups (P< 0.05), and the SDSVD score in the observation group was lower than that in the control group (P< 0.05). CONCLUSION Moxibustion at Yongquan（KI 1） can improve the cognitive function and motor and balance function of lower limbs in patients with post-stroke cognitive impairment of kidney essence deficiency，reduce the risk of fall and improve the quality of life.
Humans ; Cognition ; Cognitive Dysfunction/therapy* ; Dementia, Vascular ; Kidney ; Lower Extremity ; Moxibustion ; Quality of Life ; Stroke/complications*

During coronavirus disease 2019 epidemic, the treatment of severe trauma has been impacted. The Consensus on emergency surgery and infection prevention and control for severe trauma patients with 2019 novel corona virus pneumonia was published online on February 12, 2020, providing a strong guidance for the emergency treatment of severe trauma and the self-protection of medical staffs in the early stage of the epidemic. With the Joint Prevention and Control Mechanism of the State Council renaming "novel coronavirus pneumonia" to "novel coronavirus infection" and the infection being managed with measures against class B infectious diseases since January 8, 2023, the consensus published in 2020 is no longer applicable to the emergency treatment of severe trauma in the new stage of epidemic prevention and control. In this context, led by the Chinese Traumatology Association, Chinese Trauma Surgeon Association, Trauma Medicine Branch of Chinese International Exchange and Promotive Association for Medical and Health Care, and Editorial Board of Chinese Journal of Traumatology, the Chinese expert consensus on emergency surgery for severe trauma and infection prevention during coronavirus disease 2019 epidemic ( version 2023) is formulated to ensure the effectiveness and safety in the treatment of severe trauma in the new stage. Based on the policy of the Joint Prevention and Control Mechanism of the State Council and by using evidence-based medical evidence as well as Delphi expert consultation and voting, 16 recommendations are put forward from the four aspects of the related definitions, infection prevention, preoperative assessment and preparation, emergency operation and postoperative management, hoping to provide a reference for severe trauma care in the new stage of the epidemic prevention and control.

Objective: To investigate the mechanism of S100A7 inducing the migration and invasion in cervical cancers. Methods: Tissue samples of 5 cases of cervical squamous cell carcinoma and 3 cases of adenocarcinoma were collected from May 2007 to December 2007 in the Department of Gynecology of the Affiliated Hospital of Qingdao University. Immunohistochemistry was performed to evaluate the expression of S100A7 in cervical carcinoma tissues. S100A7-overexpressing HeLa and C33A cells were established with lentiviral systems as the experimental group. Immunofluorescence assay was performed to observe the cell morphology. Transwell assay was taken to detect the effect of S100A7-overexpression on the migration and invasion of cervical cancer cells. Reverse transcription-quantitative real-time polymerase chain reaction (RT-qPCR) was used to examine the mRNA expressions of E-cadherin, N-cadherin, vimentin and fibronectin. The expression of extracellular S100A7 in conditioned medium of cervical cancer cell was detected by western blot. Conditioned medium was added into Transwell lower compartment to detect cell motility. Exosomes were isolated and extracted from the culture supernatant of cervical cancer cell, the expressions of S100A7, CD81 and TSG101 were detected by western blot. Transwell assay was taken to detect the effect of exosomes on the migration and invasion of cervical cancer cells. Results: S100A7 expression was positively expressed in cervical squamous carcinoma and negative expression in adenocarcinoma. Stable S100A7-overexpressing HeLa and C33A cells were successfully constructed. C33A cells in the experimental group were spindle shaped while those in the control group tended to be polygonal epithelioid cells. The number of S100A7-overexpressed HeLa cells passing through the Transwell membrane assay was increased significantly in migration and invasion assay (152.00±39.22 vs 105.13±15.75, P<0.05; 115.38±34.57 vs 79.50±13.68, P<0.05). RT-qPCR indicated that the mRNA expressions of E-cadherin in S100A7-overexpressed HeLa and C33A cells decreased (P<0.05) while the mRNA expressions of N-cadherin and fibronectin in HeLa cells and fibronectin in C33A cells increased (P<0.05). Western blot showed that extracellular S100A7 was detected in culture supernatant of cervical cancer cells. HeLa cells of the experimental group passing through transwell membrane in migration and invasion assays were increased significantly (192.60±24.41 vs 98.80±47.24, P<0.05; 105.40±27.38 vs 84.50±13.51, P<0.05) when the conditional medium was added into the lower compartment of Transwell. Exosomes from C33A cell culture supernatant were extracted successfully, and S100A7 expression was positive. The number of transmembrane C33A cells incubated with exosomes extracted from cells of the experimental group was increased significantly (251.00±49.82 vs 143.00±30.85, P<0.05; 524.60±52.74 vs 389.00±63.23, P<0.05). Conclusion: S100A7 may promote the migration and invasion of cervical cancer cells by epithelial-mesenchymal transition and exosome secretion.
Female ; Humans ; Uterine Cervical Neoplasms/pathology* ; HeLa Cells ; Fibronectins/metabolism* ; Culture Media, Conditioned ; Carcinoma, Squamous Cell/metabolism* ; Adenocarcinoma ; Cadherins/metabolism* ; RNA, Messenger/metabolism* ; Cell Movement ; Epithelial-Mesenchymal Transition/genetics* ; Cell Line, Tumor ; Cell Proliferation ; S100 Calcium Binding Protein A7/metabolism*

Objective: To provide a new solution for the digital design of nasal prostheses, this study explores the three-dimensional (3D) facial morphology completion method for external nasal defects based on the non-rigid registration process of 3D face template. Methods: A total of 20 male patients with tooth defect and dentition defect who visited the Department of Prosthodontics, Peking University School and Hospital of Stomatology from June to December 2022 were selected, age 18-45 years old. The original 3D facial data of patients were collected, and the 3D facial data of the external nose defect was constructed in Geomagic Wrap 2021 software. Using the structured 3D face template data constructed in the previous research of the research group, the 3D face template was deformed and registered to the 3D facial data of external nose defect (based on the morphology of non-defective area) by non-rigid registration algorithm (MeshMonk program), and the personalized deformed data of the 3D face template was obtained, as the complemented facial 3D data. Based on the defect boundary of the 3D facial data of the external nose defect, the complemented external nose 3D data can be cut out from the complemented facial 3D data. Then the nasofacial angle and nasolabial angle of the complemented facial 3D data and the original 3D facial data was compared and analyzed, the ratio between the nose length and mid-face height, nose width and medial canthal distance of the complemented facial 3D data was measured, the edge fit between the edge curve of the complemented external nose 3D data and the defect edge curve of the 3D facial data of external nose defect was evaluated, and the morphological difference of the nose between the complemented external nose 3D data and the original 3D facial data was analyzed. Results: There was no significant statistically difference (t=-0.23, P=0.823; Z=-1.72, P=0.086) in the nasofacial angle (28.2°±2.9°, 28.4°±3.5° respectively) and nasolabial angle [95.4°(19.2°), 99.9°(9.5°) respectively] between the 20 original 3D facial data and the complemented facial 3D data. The value of the ratio of nose length to mid-face height in the complemented facial 3D data was 0.63±0.03, and the value of the ratio of nose width to medial canthal distance was 1.07±0.08. The curve deviation (root mean square value) between the edge curve of the complemented external nose 3D data and the defect edge curve of the 3D facial data of external nose defect was (0.37±0.09) mm, the maximum deviation was (1.14±0.32) mm, and the proportion of the curve deviation value within±1 mm was (97±3)%. The distance of corresponding nose landmarks between the complemented facial 3D data and the original 3D facial data were respectively, Nasion: [1.52(1.92)] mm; Pronasale: (3.27±1.21) mm; Subnasale: (1.99±1.09) mm; Right Alare: (2.64±1.34) mm; Left Alare: (2.42± 1.38) mm. Conclusions: The method of 3D facial morphology completion of external nose defect proposed in this study has good feasibility. The constructed complemented external nose 3D data has good facial coordination and edge fit, and the morphology is close to the nose morphology of the original 3D facial data.

This study aims to improve the solubility and bioavailability of daidzein by preparing the β-cyclodextrin-daidzein/PEG_(20000)/Carbomer_(940) nanocrystals. Specifically, the nanocrystals were prepared with daidzein as a model drug, PEG_(20000), Carbomer_(940), and NaOH as a plasticizer, a gelling agent, and a crosslinking agent, respectively. A two-step method was employed to prepare the β-cyclodextrin-daidzein/PEG_(20000)/Carbomer_(940) nanocystals. First, the insoluble drug daidzein was embedded in β-cyclodextrin to form inclusion complexes, which were then encapsulated in the PEG_(20000)/Carbomer_(940) nanocrystals. The optimal mass fraction of NaOH was determined as 0.8% by the drug release rate, redispersability, SEM morphology, encapsulation rate, and drug loading. The inclusion status of daidzein nanocrystals was determined by Fourier transform infrared spectroscopy(FTIR), thermogravimetric analysis(TGA), and X-ray diffraction(XRD) analysis to verify the feasibility of the preparation. The prepared nanocrystals showed the average Zeta potential of(-30.77±0.15)mV and(-37.47±0.64)mV and the particle sizes of(333.60±3.81)nm and(544.60±7.66)nm before and after daidzein loading, respectively. The irregular distribution of nanocrystals before and after daidzein loading was observed under SEM. The redispersability experiment showed high dispersion efficiency of the nanocrystals. The in vitro dissolution rate of nanocrystals in intestinal fluid was significantly faster than that of daidzein, and followed the first-order drug release kinetic model. XRD, FTIR, and TGA were employed to determine the polycrystalline properties, drug loading, and thermal stability of the nanocrystals before and after drug loading. The nanocrystals loaded with daidzein demonstrated obvious antibacterial effect. The nanocrystals had more significant inhibitory effects on Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa than daidzein because of the improved solubility of daidzein. The prepared nanocrystals can significantly increase the dissolution rate and oral bioavailability of the insoluble drug daidzein.
Sodium Hydroxide ; Acrylic Resins ; Escherichia coli ; Nanoparticles