Objective: To design and establish a new method for flow cytometry-based detection of commonly observed highly expressed antigens on red blood cells, and to further evaluate the differences and distribution characteristics of antigen expression levels between ABO blood type homozygotes and heterozygotes in healthy individuals. Methods: Residual blood samples after donor blood type identification by Shanghai Blood Center in April 2024 were collected. Among them, samples of 19 homozygous and 19 heterozygous individuals of type A and type B were selected. Then the expression level of ABO antigen on red blood cells were detected using the new method established in this study and the traditional aldehyde fixed red blood cell method. Both methods were tested independently three times and the results were compared. Results: The mean values of the three detection results of the new method was (×10 /RBC): AA homozygous 3.3±0.5, AO heterozygous 2.8±0.3, BB homozygous 3.6±0.3, BO heterozygous 3.1±2.8. The mean values of the three detection results of the aldehyde fixation method were AA homozygous 5.9±0.9, AO heterozygous 5.0±1.4, BB homozygous 3.8±0.6, and BO heterozygous 3.3±0.4. The average antigen distribution of each genotype followed a normal distribution. Comparing the average antigen expression levels of homozygotes and heterozygotes, both methods showed that A/B homozygotes had higher antigen levels than heterozygotes, with AA being 1.17 to 1.18 times that of AO and BB being 1.15 to 1.16 times that of BO. Comparing the inter batch differences in the three test results of two methods, the new method showed no significant difference in the three test results for four genotypes (P>0.05). The aldehyde fixation method showed significant differences in the test results for all three genotypes (P<0.01) except for BB homozygotes (P>0.05). The reliability and reproducibility of the new method were better than those of the traditional aldehyde fixation method. Conclusion: The antigen expression level of ABO homozygotes is higher than that of heterozygotes, and the difference in antigen level between type A homozygotes and heterozygotes is slightly higher than that of type B. The new method is superior to traditional aldolization fixation methods.

In the clinical stage, suspected hemolytic plasma may cause hemolysis illness, manifesting as symptoms such as heart failure, severe anemia, etc. Applying a deep learning method to plasma images significantly improves recognition accuracy, so that this paper proposes a plasma quality detection model based on improved "You Only Look Once" 5th version (YOLOv5). Then the model presented in this paper and the evaluation system ‌were introduced‌ into the plasma datasets, and ‌the average accuracy of the final classification reached 98.7%‌. The results of this paper's experiment were obtained through the combination of several key algorithm modules including‌ omni-dimensional dynamic convolution, pooling with separable kernel attention, residual bi-fusion feature pyramid network, ‌and‌ re-parameterization convolution. The method of this paper‌ obtains the feature information of spatial mapping efficiently, and enhances the average recognition accuracy of plasma quality detection. This paper presents a high-efficiency detection method for plasma images, aiming to provide a practical approach to prevent hemolysis illnesses caused by external factors.
Algorithms ; Humans ; Hemolysis ; Plasma ; Deep Learning ; Image Processing, Computer-Assisted/methods*

OBJECTIVE: The relationship between fish consumption and stroke is inconsistent, and it is uncertain whether this association varies across predicted stroke risks. METHODS: A cohort study comprising 95,800 participants from the Prediction for Atherosclerotic Cardiovascular Disease Risk in China project was conducted. A standardized questionnaire was used to collect data on fish consumption. Participants were stratified into low- and moderate-to-high-risk categories based on their 10-year stroke risk prediction scores. Hazard ratios ( HRs) and 95% confidence intervals ( CIs) were estimated using Cox proportional hazard models and additive interaction by relative excess risk due to interaction (RERI), attributable proportion (AP), and synergy index (SI). RESULTS: During 703,869 person-years of follow-up, 2,773 incident stroke events were identified. Higher fish consumption was associated with a lower risk of stroke, particularly among moderate-to-high-risk individuals ( HR = 0.53, 95% CI: 0.47-0.60) than among low-risk individuals ( HR = 0.64, 95% CI: 0.49-0.85). A significant additive interaction between fish consumption and predicted stroke risk was observed (RERI = 4.08, 95% CI: 2.80-5.36; SI = 1.64, 95% CI: 1.42-1.89; AP = 0.36, 95% CI: 0.28-0.43). CONCLUSION Higher fish consumption was associated with a lower risk of stroke, and this beneficial association was more pronounced in individuals with moderate-to-high stroke risk.
Humans ; China/epidemiology* ; Male ; Female ; Stroke/etiology* ; Middle Aged ; Prospective Studies ; Incidence ; Aged ; Animals ; Fishes ; Risk Factors ; Diet ; Seafood ; Adult ; Cohort Studies

Objective:To analyze the influence of forming direction on the surface characteristics,elastic modulus,bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction,and to provide scientific basis and guidance for the clinical applica-tion of oral denture base resin materials.Methods:The 3D printing technology was used to print denture base resin samples.The shape and size of the samples referred to the current standard for testing conven-tional denture base materials.The samples used for physical performance testing were cylindrical(with a diameter of 15 mm and a thickness of 1 mm)and printed at different angles along the Z axis(0°,45°,90°).Scanning electron microscope was used to observe the microscopic topography of the different sam-ples.The color stability of different samples was observed by color stabilizer.The surface roughness of the samples was analyzed by using surface roughness tester.The Vickers hardness was measured to ana-lyze the hardness of the samples.The samples used for mechanical performance testing were rectangular(elastic modulus and bending strength:A length of 64 mm,a width of 10 mm,and a height of 3.3 mm;fracture toughness:A length of 39 mm,a width of 8 mm,and a height of 4 mm),divided into two groups:W group and H group.The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X,Y axis plane,while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X,Y axis plane.The forming angles of both groups were equally divided into 0°,45°,and 90°.The elastic modulus,bending strength and fracture toughness of different samples were studied through universal mechanical testing machine.SPSS 22.0 software was used for statistical analysis.Results:The microscopic topogra-phy and roughness of different samples were closely related to the printing direction,with significant differences between the 0°,45°,and 90° specimens.The 0° specimens had the smoothest surface(roughness＜1 μm).The surface of the 45 ° specimen was the roughest(roughness＞3 μm).The microhardness of the 0° sample was the best[(196.13±0.20)MPa],with a significant difference com-pared with the 90° sample[(186.62±4.81)MPa,P＜0.05].The mechanical properties of different samples were also closely related to the printing direction.The elastic modulus,bending strength,and fracture toughness of the 45° samples in the W group were the highest compared with the other groups.The results of elastic modulus showed that in the H group,the 45° specimens had the highest elastic mo-dulus,which was significantly different from the 0° and 90° specimens(P＜0.05).The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens(P＜0.05).The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group.The bending strength of the 90° specimens in the W group was the smallest,and there was a significant difference between 90° and the 0° and 45° specimens(P＜0.05);And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group(P＜0.05).The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2,which was specified in the denture base standard.The 45° samples in the W group were the highest,with significant differences compared with the 0° and 90° samples(P＜0.05).And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2.And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group(P＜0.05).Conclusion:The 0° samples had rela-tively better physical properties.The 45° samples had the best mechanical properties.But the fracture toughness of specimens(H group and 90° samples of W group)did not yet meet clinical requirements.That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction.Only when the performance of the printed samples in all directions met the minimum require-ments of the standard,they could be used in clinical practice.

Objective This study aimed to investigate the potential relationship between urinary metals copper (Cu), arsenic (As), strontium (Sr), barium (Ba), iron (Fe), lead (Pb) and manganese (Mn) and grip strength. Methods We used linear regression models, quantile g-computation and Bayesian kernel machine regression (BKMR) to assess the relationship between metals and grip strength.Results In the multimetal linear regression, Cu (β=-2.119), As (β=-1.318), Sr (β=-2.480), Ba (β=0.781), Fe (β= 1.130) and Mn (β=-0.404) were significantly correlated with grip strength (P < 0.05). The results of the quantile g-computation showed that the risk of occurrence of grip strength reduction was -1.007 (95％ confidence interval:-1.362, -0.652; P < 0.001) when each quartile of the mixture of the seven metals was increased. Bayesian kernel function regression model analysis showed that mixtures of the seven metals had a negative overall effect on grip strength, with Cu, As and Sr being negatively associated with grip strength levels. In the total population, potential interactions were observed between As and Mn and between Cu and Mn (Pinteractions of 0.003 and 0.018, respectively).Conclusion In summary, this study suggests that combined exposure to metal mixtures is negatively associated with grip strength. Cu, Sr and As were negatively correlated with grip strength levels, and there were potential interactions between As and Mn and between Cu and Mn.

Objective To investigate the dosimetric effects of different calculation grid size(CGS)in helical tomotherapy(HT)planning system on stereotactic body radiation therapy(SBRT)for non-small cell lung cancer(NSCLC).Methods Nine NSCLC patients receiving radiation therapy for the first time at some hospital from March 2019 to December 2022 were selected as the subjects.SBRT planning was carried out through the HT system with three different CGS plans(Fine,Normal,and Coarse)and the same pitch,modulation factor(MF)and optimization conditions,and the target area indexes of the three CGS plans were compared including conformity index(CI),homogeneity index(HI),dosimetric parameters of the organ at risk(OAR),point dose verification pass rate,treatment time,number of monitor units and Sinograms.SPSS 22.0 was used for statistical analysis.Results For target area HI,there weres significant differences between CGS Fine plan and Coarse plan and between CGS Normal plan and Coarse plan(P＜0.05),while no statistical differences were found between CGS Fine plan and Normal plan(P＞0.05).For target area CI,there were significant differences between CGS Fine plan and Coarse plan(P＜0.05),while no statistical differences were found between CGS Fine plan and Normal plan and between CGS Normal plan and Coarse plan(P＞0.05).For OAR dosimetric parameters,CGS Fine plan and Coarse plan had significant differences in heart Dmax and Dmean,esophageal Dmax and Dmean,V5,V20,V30 and Dmean of the whole lung and affected lung,V5 and Dmax of the affected lung and heart V10 and V30(P＜0.05),CGS Normal plan and Coarse plan had obvious differences in esophageal Dmax(P＜0.05),and the remained dosimetric parameters were not statistically significant(P＞0.05).Fine,Normal and Coarse plans had the point dose verifica-tion pass rates being 0.96％,1.50％and 1.77％,respectively.In terms of treatment time and number of monitor units,there were significant differences between Fine plan and Coarse plan(P＜0.05)while no statistical differences were found between Fine and Normal plans and between Normal and Coarse plans(P＞0.05).Sinograms analyses showed Fine plan had evenly distributed segment color gradient,Coarse plan had areas of very dark and very light color gradients and Normal plan was somewhere in between.Conclusion Low CGS has to be used as much as possible to obtain accurate dose distribution during SBRT planning for NSCLC patients,which contributes to the execution of the radiation therapy plan and the prevention of ad-verse effects.[Chinese Medical Equipment Journal,2024,45(2):52-57]

Objective To investigate the radiotherapy dose impacts of different jaw widths on stereotactic body radiotherapy(SBRT)for hepatocellular carcinoma(HCC)with the hilical tomotherapy(HT)planning system.Methods Totally 16 HCC patients who received radiotherapy at some hospital from March 2021 to August 2023 were selected,and the planning was carried out with the same pitch,modulation factors and optimization conditions and the jaw widths being 1.0,2.5 and 5.0 cm.The dosimetric differences due to the jaw widths in planned targets and organs at risk(OAR)were compared,and the planned treatment time,monitor unit,gantry rotations and gantry period were evaluated.SPSS 22.0 was used for statistical analysis.Results Better dosimetric parameters and lower doses to OARs could be got with lower jaw widths.The widened jaw widths resulted in reduced planned treatment time,decreased monitor units and gantry rotations,shortened gantry period while enhanced treatment efficiency.Conclusion A 2.5 cm jaw width for HT planning contributes to improving treatment efficiency during HCC SBRT under the premise of ensured target dose distribution and satisfactory dose to OAR for clinical require-ments.[Chinese Medical Equipment Journal,2024,45(7):51-55]

OBJECTIVE: To investigate the effect of bone cement distribution on efficacy of residual back pain after percutaneous vertebra plasty(PVP). METHODS: From January 2017 to December 2020, a total of 65 cases with single segment osteoporotic thoracolumbar vertebral fractures underwent parallel vertebroplasty surgery. On the basis of the postoperative X-ray films of bone cement distribution were divided into two groups. The bone cement was biased to the lateral side of the vertebral body (partial group, 20 cases), there were 9 males and 11 famales with an average age of (70.3±7.4) years old ranging from 60 to 84 years old. The bone cement was over the vertebral midline, and completely filled with contralateral vertebral body (bilateral group, 45 cases), there were 10 males and 35 famales with an average age of (70.7±8.0) years old ranging from 60 to 86 years old. All of them underwent PVP surgery, bone cement was injected into the vertebral body through paitail transpedicular approach. The amount of bone cement injection, the visual analogue scale(VAS) of preoperation and 1 day, 1 month, 3 months after surgery between two groups were observed and compared. RESULTS: The amount of cement injection was (4.25±0.99) ml in the partial group, and (4.07±1.18) ml in the bilateral group, there was no significant difference between two groups (P>0.05). Postoperative pain was relieved than preoperative pain (P<0.05), the VAS of 1 day, 1 and 3 months after operation (3.90±1.37), (2.35±0.67) and (1.55±0.51) in the partial group were higher than (2.67±0.60), (1.62±0.58) and (1.31±0.47) in the bilateral group (P<0.05). There were 9 cases in partial group, the pain was not relieved due to unfilled cement until the contralateral bone was injected into the bone cement. CONCLUSION The distribution of bone cement is one of the main factors affecting residual back pain after PVP, and in the clinical, we should make sure the distribution of bone cement over the midline of vertebral body.
Humans ; Bone Cements ; Aged ; Male ; Female ; Middle Aged ; Aged, 80 and over ; Vertebroplasty/methods* ; Back Pain/etiology* ; Lumbar Vertebrae/surgery* ; Spinal Fractures/surgery* ; Thoracic Vertebrae/surgery*

OBJECTIVE: This study aimed to investigate the association between fruit and vegetable intake and arterial stiffness. METHODS: We conducted a cohort-based study comprising 6,628 participants with arterial stiffness information in the Prediction for Atherosclerotic Cardiovascular Disease Risk in China (China-PAR) project. A semi-quantitative food-frequency questionnaire was used to assess baseline (2007-2008) and recent (2018-2021) fruit and vegetable intake. We assessed changes in fruit and vegetable intake from 2007-2008 to 2018-2021 in 6,481 participants. Arterial stiffness was measured using the arterial velocity-pulse index (AVI) and arterial pressure-volume index (API). Elevated AVI and API values were defined according to diverse age reference ranges. RESULTS: Multivariable-adjusted linear regression models revealed that every 100 g/d increment in fruit and vegetable intake was associated with a 0.11 decrease in AVI ( B= -0.11; 95% confidence interval [ CI]: -0.20, -0.02) on average, rather than API ( B = 0.02; 95% CI: -0.09, 0.13). The risk of elevated AVI (odds ratio [ OR] = 0.82; 95% CI: 0.70, 0.97) is 18% lower in individuals with high intake (≥ 500 g/d) than in those with low intake (< 500 g/d). Furthermore, maintaining a high intake in the past median of 11.5 years of follow-up was associated with an even lower risk of elevated AVI compared with a low intake at both baseline and follow-up ( OR = 0.64; 95% CI: 0.49, 0.83). CONCLUSION Fruit and vegetable intake was negatively associated with arterial stiffness, emphasizing recommendations for adherence to fruit and vegetable intake for the prevention of arterial stiffness.
Humans ; Vascular Stiffness ; Fruit ; Vegetables ; Atherosclerosis ; China