Objective: To quantitatively assess the health risk of preservatives from beverages around primary schools in Anshun City, and to provide scientific basis for precise food safety supervision. Methods: From December 2023 to July 2024, 602 beverage samples were randomly collected from within 100 meters of 19 primary schools in Anshun City. The content of benzoic acid, sorbic acid, and dehydroacetic acid was detected according to GB 5009 series standards. Combined with children s physiological parameters (body weight 30 kg, daily intake 0.15 L), the Hazard Quotient (HQ) and Hazard Index (HI) models were used to evaluate health risks. Results: The total detection rate of preservatives from beverages around primary schools was 63.0%, and the total over limit rate was 9.0%. The detection rate of preservatives in flavored beverages was the highest (72.6%), and the highest over limit rate of preservatives in special purpose beverages was the highest (17.2%). The single preservative HQ (benzoic acid up to 0.47 ) and mixed HI (up to 0.55) of all samples were below 1(safety threshold). However, the HQ value of benzoic acid in flavored beverages (0.47) was 2.9 times that of sorbic acid (0.16), contributing significantly to health risk. Sensitivity analysis showed that if the daily consumption increased to 0.3 L, the HI value of flavored beverages would rise to 1.11, exceeding the safety threshold. Enterprise scale analysis showed that the exceedance rate of special purpose beverages in large enterprises reached 30.0%, while micro enterprises, accounting for a dominant market share (52.2%), constituted the main source of children s daily exposure to their products. Conclusions The overall health risk of perservatives in beverages sold near primary schools in Anshun City is controllable, but there is a noticeable risk of gradient. The risk of children’s exposure to preservatives through beverage consumption should not be ignored.

ObjectiveTo explore effect of Xianlian Jiedu prescription on the recurrence of colorectal cancer （CRC） and investigate the related mechanisms. MethodsA postoperative recurrence model was established in 25 Balb/c mice by injecting CT26 cells subcutaneously into the armpit， followed by surgical removal of 99% of the subcutaneous tumor. The mice were randomly divided into model group， low-dose Xianlian Jiedu prescription （XLJDP-L） group （6.45 g·kg^-1·d^-1）， medium-dose Xianlian Jiedu prescription （XLJDP-M） group （12.9 g·kg^-1·d^-1）， high-dose Xianlian Jiedu prescription （XLJDP-H） group （25.8 g·kg^-1·d^-1）， and 5-fluorouracil （5-FU） group （1×10^-3 g·kg^-1·d^-1）. The mice were euthanized after 14 days of continuous intervention， and recurrent tumor tissue was harvested. Hematoxylin and eosin （HE） staining was used to observe pathological and morphological changes in the recurrent tumor tissue. Immunohistochemistry （IHC） was employed to assess the expression of proliferating cell nuclear antigen （Ki67）， vascular endothelial growth factor （VEGF）， and platelet-endothelial cell adhesion molecule （CD31） in recurrent tumor tissue. The Western blot was used to detect the protein expression levels of angiopoietin-2 （ANG-2）， VEGF， phosphorylated-protein kinase B （p-Akt）， protein kinase B （Akt）， phosphorylated-phosphatidylinositol 3-kinase （p-PI3K）， and phosphatidylinositol 3-kinase （PI3K） in recurrent tumor tissue. ResultsBefore treatment， there were no statistical differences in tumor volume， tumor weight， and body mass among the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group compared to the model group， indicating model stability. After treatment， compared with those in the model group， the tumor volume and tumor weight in the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group were significantly reduced （P<0.01）， showing dose dependency. Meanwhile， there were no significant differences in body weight among the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group compared to the model group. HE staining showed that compared with that in the model group， tumor tissue in the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group had loosely arranged cells， increased intercellular spaces， small and shriveled nuclei， light staining， fewer mitotic figures and atypical nuclei， and increased necrotic areas. IHC showed that compared with those of the model group， the positive rates of Ki67， VEGF， and CD31 in the recurrent tumor tissue of the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group were significantly reduced （P<0.01） in a dose-dependent manner. Western blot results showed that compared with those of the model group， the protein expression levels of ANG-2 and VEGF in the recurrent tumor tissue of the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group were significantly downregulated （P<0.05， P<0.01）， and the p-Akt/Akt and p-PI3K/PI3K ratios were significantly decreased in a dose-dependent manner （P<0.05， P<0.01）. ConclusionXianlian Jiedu prescription significantly inhibits the recurrence of CRC in mice after subcutaneous tumor surgery. The mechanism may involve regulating the PI3K/Akt pathway and downregulating key angiogenic proteins such as ANG-2， VEGF， and CD31.

OBJECTIVE To improve the efficiency and quality of dispensed oral drug management in the inpatient pharmacy， and ensure the safety of drug use in patients. METHODS SWOT （strength， weakness， opportunity， threat） analysis method was used to analyze the internal strengths and weaknesses， as well as the external opportunities and threats in the construction of a closed-loop management system for dispensed oral drugs in the inpatient pharmacy of our hospital， and propose improvement strategies. RESULTS & CONCLUSIONS A refined， full-process， closed-loop traceability management system for dispensed oral drugs in the inpatient pharmacies was successfully established， which is traceable in origin， trackable in destination， and accountable in responsibility. After the application of this system， the registration rate of dispensed drug information and the correctness rate of registration content both reached 100%. The proportion of overdue drug varieties in the same period of 2024 decreased by 77.78% compared to March 2020， the inventory volume decreased by 29.50% compared to the first quarter of 2020， the per-bed medication volume decreased by 32.14% compared to the first quarter of 2020； the average workload per post in the same period of 2023 increased by 49.09% compared to 2019， the dispensing accuracy rate reached 100%， and the improvement rate of quality control problem increased by 25.25% compared to 2021. This system effectively improves the safety and accuracy of dispensed oral drug management in the inpatient pharmacy.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

[Objective] To assess the data characteristics of quality monitoring indicators for red blood cell (RBC) preparations, so as to provide reference for continuous improvement of blood quality. [Methods] The quality inspection data of 6 types of RBC preparations from Chongqing blood center from 2019 to 2023 were summarized. For the same indicators, the numerical range of quality indicators was monitored by comparing different types of preparations with the national standard GB18469. The loss and/or damage to RBCs caused by different preparation process were compared, and the impact of different preparation processes on the quality of RBCs was discussed. [Results] The appearance and sterility test compliance rates of the six types of RBC preparations were both 100%, while the compliance rates of other items were all ≥75%. The compliance rate of hematocrit for suspended RBCs was the lowest at 75%, with a median of 0.52, which was close to the lower limit of GB18469, while the medians of hematocrit for the other types were all at the midline level of GB18469. The Hb content for different types of RBCs was significantly higher than the corresponding requirements of GB18469 (P<0.05). The hemolysis rate at the end of storage for different types of RBCs was significantly lower than the requirements of GB18469 (P<0.05). The 1 U leukoreduction process resulted in a hemoglobin content loss of about 5% and had a significant impact on the hemolysis rate at the end of storage (P<0.05). The washing process resulted in a hemoglobin content loss of <3% and had no significant impact on the hemolysis rate at the end of storage (P>0.05). The concentration process resulted in a hemoglobin content loss of <3% and had a significant impact on the hemolysis rate at the end of storage (P<0.05). [Conclusion] The impact of different processes on RBC preparations is within a controllable range and meets the requirements of GB18469. The quality monitoring data can provide a reference for clinical blood selection, effectiveness evaluation and revision of related standards.

OBJECTIVE To know about the perception and current status of drug risk management among pharmacists in Chinese medical institutions， providing insights and recommendations for enhancing the drug risk management system in medical institutions. METHODS A questionnaire survey was conducted across 28 provinces， cities， and autonomous regions； stratified radom sampling was employed to study the population of medical workers and pharmaceutical professionals in medical institutions nationwide. The survey included information on the survey population， the current status of drug risk management implementation in medical institutions， the cognition， definition and process of drug risk management related concepts， and the content and mode of drug risk management work in medical institutions. Finally， suggestions were collected from various medical institutions on the system construction of drug risk management. Descriptive statistical analysis was adopted to summarize the obtained data. RESULTS A total of 446 questionnaires were collected in this survey， including 420 valid questionnaires and 26 invalid questionnaires. The questionnaire collection rate was 100%，and the effective rate was 94.17%. 51.19% of the respondents No.2020YFC2009001）。 based their understanding of drug risk management on Management Measures for Adverse Drug Reaction Reports and Monitoring， while 87.38% recognized the need for drug risk management throughout the drug use process. 63.33% of the participants stated that their medical institutions had dedicated positions related to drug risk management， with the highest proportion （72.17%） was in third-grade class A medical institutions. 66.43% reported implementing risk management across all drug use stages. Suggestions for the development of drug risk management systems in medical institutions by the research participants focused on enhancing guiding documents， clarifying concepts， establishing information-sharing mechanisms. CONCLUSIONS The overall awareness of drug risk management in China’s medical institutions is high， with practices in place across various stages in multiple forms. However， there remains a need to strengthen institutional documents， management regulations， system development， and information-sharing mechanisms to improve collaborative governance， improve drug management levels， and ensure patient safety.

The European Society of Cardiology (ESC) and the European Association for Cardio-Thoracic Surgery (EACTS) have recently updated and published the 2024 ESC guidelines for the management of atrial fibrillation. Based on the latest evidences, the guidelines have been updated in many aspects, such as diagnostic criteria for atrial fibrillation, AF-CARE treatment principles, comorbidities and risk factor management. In particular, there are significant changes in the recommendations for surgical management of atrial fibrillation in the guidelines. Therefore, this paper aims to interpret the content updates of the guidelines in AF-CARE treatment principles, diagnostic criteria and surgical treatment of atrial fibrillation, especially highlighting the updates and new suggestions about surgical treatment of atrial fibrillation.

To evaluate long-term survival and clinical outcomes of patients with knee osteo-arthritis undergoing total knee arthroplasty (TKA) through long-term follow-up.

BACKGROUND:Crosslinked sodium hyaluronate gel has good mechanical property,biocompatibility,and biodegradability,and can be used as an isolated protective material in tumor radiation therapy to protect endangered organs from damage caused by excess radiation dose. OBJECTIVE:To investigate the safety and efficacy of crosslinked sodium hyaluronate gel in reducing the dose of radiation to dangerous organs during brachytherapy. METHODS:A total of 16 specific pathogen-free Kunming mice of the same age and similar body weight were selected as experimental subjects and divided into experimental group and control group by the random number table method,with 8 mice in each group.125I seeds were implanted subcutaneously in the back of mice in the experimental group,and then crosslinked sodium hyaluronate gel was injected around the radioactive particles.Only 125I seeds were implanted subcutaneously in the back of mice in the control group.After injection,the distance between the radioactive particles and the epidermis was measured by spiral CT scan,and the surface radiation dose was measured by radiation dosimeter.Within 10 weeks after injection,the growth state,survival rate,skin radiation damage,and gel retention of mice were observed. RESULTS AND CONCLUSION:(1)Spiral CT scan showed that the implanted gel was relatively concentrated and created an effective distance between the radioactive seeds and the epidermis.The body surface radiation dose of the experimental group was significantly lower than that of the control group(P<0.01).(2)During the experimental observation period,mice in both groups survived;mice in the control group showed obvious irritability and other unstable behavior in the late experimental period,and some mice in the experimental group showed similar behavior.The daily food intake of mice in the two groups had no significant change,and the body mass showed the same increasing trend.After implantation of radioactive seeds,the two groups of mice showed different degrees of radioactive skin injury.From day 23 after injection to the end of the experiment,the skin radiation injury score of the experimental group was lower than that of the control group(P<0.01).At week 10 after implantation,6 mice in the experimental group had no obvious gel residue under their skin,and 2 mice had a very small amount of scattered gel-like samples under their skin.(3)Therefore,the crosslinked sodium hyaluronate injection technique can increase the space between the radioactive target area of 125I seeds and the organ at risk outside the target through physical space occupying,which can effectively reduce the dose of the organ at risk,and play a role in the isolation and protection of the organ at risk.